Search NASA⌕ Search

SEARCH · Search NASA

Results for “isotope effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Phase Boundaries, Isotope Effect and Superconductivity of Lithium Under Hydrostatic Conditions

We present theoretical and experimental studies of superconductivity and low temperature structural phase boundaries in lithium. We mapped the structural phase diagram of 6Li and 7Li under hydrostatic conditions between 5 – 55 GPa and within the temperature range of 15 – 75 K, observing the FCC → hR1 → cI16 phase transitions. 6Li and 7Li show some differences at the structural boundaries, with a potential shift of the phase boundaries of 6Li to lower pressures. Density functional theory calculations and topological analysis of the electron density elucidates the superconducting properties and interatomic interactions within these phases of lithium.

Deemyad, Shanti↗
DOE OSTI2023

Effect of He seeding on hydrogen isotope permeation in tungsten by H-D mixed plasma exposure

Hydrogen (H) and deuterium (D) permeation fluxes for tungsten (W) by H-D mixed plasma were studied to clarify the hydrogen isotope effect on permeation by a newly designed plasma driven permeation (PDP) device at Shizuoka University. A mixed H-D plasma was produced by introducing H and D gasses with various ratios. The atomic ratio and permeation flux in the plasma were measured during the experiments. It was found that the H:D atomic ratio in the plasma was almost proportional to the introduced H:D gas ratio. When single species of H or D was irradiated, the H permeation rate showed approximately 1.6 times as high as that of D. Under H-D mixed plasma irradiation, the highest HD permeation rate was observed when the atomic ratio of H:D in the plasma was 50:50. In addition, the effect of He seeding on H-D mixed plasma driven permeation behavior was also evaluated. The recycling of hydrogen isotopes on the upstream side was enhanced due to the formation of He bubbles near the surface, which would prevent the dissolution of hydrogen isotopes into bulk W and enhance the reflection process during plasma exposure. H and D permeation fluxes were clearly reduced by seeding He in H-D mixed plasma. At lower temperature (~723 K), the ratio of steady permeation fluxes of H and D was about 75 : 25, confirming the high permeation flux of H . These results have demonstrated a significant hydrogen isotope effect, even if He was seeded or not. As the temperature increased, H and D permeation fluxes approached unity at 923 K. Therefore,this indicates that the hydrogen isotope effect was determined by the combination of recycling / reflection at or beneath the surface, which will be controlled by the temperature during plasma exposure.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Stable isotope equilibria in the dihydrogen-water-methane-ethane-propane system. Part 1: Path-integral calculations with CCSD(T) quality potentials

Isotopic compositions of alkanes are typically assumed to be kinetically controlled, but recently is has been proposed that alkanes can isotopically equilibrate for both C and H isotopes during natural gas generation. Evaluation of this requires knowledge of the isotopic equilibrium between alkanes and other common hydrogen and carbon bearing species. Here, in this study, we calculate isotopic equilibria within and between gaseous dihydrogen (H 2 ), water (H 2 O), methane (CH 4 ), ethane (C 2 H 6 ) and propane (C 3 H 8 ), including isotope fractionation among molecules, clumped isotope effects, as well as among sites of propane (i.e., the site-specific isotope effects) from 0°C to 500°C using a path-integral method paired with high-level descriptions of molecular potentials and the diagonal correction to the Born Oppenheimer approximation. While path-integral calculations with high- level CCSD(T) potentials are available for the isotopic equilibria involving methane, the path-integral calculations for ethane and propane have only been performed based on lower-level descriptions of the molecular potentials. We analyze the relative importance of various approximations that are commonly employed when isotopic equilibria are evaluated. We find that clumped isotope effects can be calculated to the same accuracy using computationally inexpensive combination of the Bigeleisen-Mayer-Urey model with the molecular potential from density functional theory. In contrast, fractionation and site preferences of both deuterium and carbon-13 benefit from the use of the higher level CCSD(T) potentials and accounting for anharmonic effects. Additionally, for fractionation and site preference of deuterium corrections to Born-Oppenheimer approximation can also be important.

03 NATURAL GAS↗
DOE OSTI2021

Insertion products in the reaction of carbonyl oxide Criegee intermediates with acids: Chloro(hydroperoxy)methane formation from reaction of CH 2 OO with HCl and DCl

The reactions of carbonyl oxides (“Criegee intermediates”) with organic and inorganic acids have been postulated to proceed predominantly by an insertion mechanism, and the hydroperoxy-substituted ester products from reactions with organic acids have been spectroscopically observed. Here this work characterizes the products from one of the simplest reactions of carbonyl oxides with inorganic acids, that of formaldehyde oxide, CH 2 OO, with hydrogen chloride, which occurs via a 1,2-insertion in the H–Cl bond. Reactions of both HCl and DCl isotopologues yield product signal at the mass of the insertion product chloro(hydroperoxy)methane and a dissociative ionisation peak at the mass of the protonated (or deuteronated) Criegee intermediate. The isotopic composition of the insertion product has been measured for reaction mixtures where both HCl isotopologues are present, and the H/D ratio of the product is consistently higher (by a factor of 1.6 ± 0.3) than that of the reactants. This isotope selectivity in the products has smaller uncertainty than the ratio of measured rate coefficients and suggests a normal (k H > k D ) kinetic isotope effect in the reaction. Theoretical kinetics calculations predict a small normal kinetic isotope effect for the overall reaction (k H / k D = 1.35 at 20 Torr N 2 and k H / k D = 1.2 for 1 atm N 2 ) but predict a substantial inverse kinetic isotope effect (k D > k H ) for the stabilisation fraction, in disagreement with the experimental observation.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2021

Isotopic dependence of the frequency of optical vibrations in molybdenum monohydride

We show that it is currently known that three hydrides – PdH x , MoH x , and TiH x – exhibit an inverse isotope effect in superconductivity. Namely, the phase with a heavier hydrogen isotope, deuterium, has a higher critical temperature. Hydrides and deuterides of palladium have intensively been studied both experimentally and theoretically, but the origin of the isotope effect has not been established with certainty. The commonly accepted explanation is that the effect is likely to be due to the strong anharmonicity of the optical hydrogen vibrations, which was considered to be responsible for the large deviation of the ratio of the fundamental optical frequencies ω H /ω D = 1.51 from the harmonic value $\sqrt{2}$ ≈ 1.41. In the present paper, powder samples of MoH 1.1(1) and MoD 1.07(3) were synthesized under a hydrogen / deuterium pressure of several gigapascals and studied by inelastic neutron scattering (INS) at ambient pressure and T = 10 K. The INS study demonstrated that optical vibrations of H atoms in MoH 1.1 and D atoms in MoD 1.07 are harmonic and the ratio of fundamental optical frequencies ω H /ω D = 1.44 is close to the harmonic value $\sqrt{2}$ ≈ 1.41. This shows that anharmonicity is not a necessary condition for the presence of the inverse isotope effect. The MoD 1.07 sample was additionally studied by neutron diffraction (ND) at ambient pressure and T = 100 K. In agreement with previous ND results for MoH 1.2 , the ND study of MoD 1.07 showed that deuterium atoms occupied almost all octahedral interstitial sites in its hexagonal close-packed metal lattice and formed a NiAs-type crystal structure with the composition close to MoD. The overstoichiometric composition MoD 1.07 of the deuteride is likely to result from a small fraction D/Mo ~ 0.07 of deuterium atoms partially occupying the tetrahedral interstices.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Lithium's low-temperature phase transitions: Insights into quantum lattice dynamics and superconductivity

The large lattice dynamics of lithium, driven by its low atomic mass, results in energetically similar structures and significant isotope effects under pressure, posing challenges to current theoretical models. Above 20 GPa and at low temperatures, lithium's electronic properties deviate from simple metallic behavior, with superconductivity emerging in a complex, pressure-dependent manner, alongside an unusual isotope effect. The structural phases of 7 Li reported under these conditions are inconsistent across studies, and the structures of 6 Li remain unexamined. These gaps limit our understanding of the effects of pressure on lithium's electronic properties and the role of quantum lattice effects on its structural behavior under pressure. Here, we integrate experimental and theoretical approaches to investigate the low-temperature structural phase boundaries in lithium isotopes. We map the structural phase diagram of 7 Li from 5 to 55 GPa and 15–75 K, identifying the sequence fcc → ℎ⁡R⁢1 → cI16. A pronounced isotope effect is observed, with 6 Li shifting the fcc → ℎ⁡R⁢1 phase boundary to lower pressures at 15 K. Density functional theory calculations further clarify how these structural changes affect superconducting properties, particularly emphasizing the role of the fcc → ℎ⁡R⁢1 transition in lithium's superconductivity. Furthermore, our findings offer insights into the unique behavior of lithium isotopes under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Isotope-dependent Tafel analysis probes proton transfer kinetics during electrocatalytic water splitting

Proton transfer plays an important role in both hydrogen and oxygen evolution reactions during electrocatalytic water splitting to produce green hydrogen. However, directly adapting the conventional proton/deuterium kinetic isotope effect to study proton transfer in heterogeneous electrocatalytic processes is challenging. Here we propose using the shift in the Tafel slope between protic and deuteric electrolytes, or the Tafel slope isotope effect, as an effective probe of proton transfer characteristics. Comparison of the Tafel slope isotope effect for diverse hydrogen and oxygen evolution reaction electrocatalysts in different pH environments reveals that proton transfer is both pH and structure dependent. Using ruthenium oxide as an example, we show that local structure modification can change the rate-determining step from an electrochemical, concerted proton–electron transfer step to a chemical step and improve the oxygen evolution activity in acid. The isotope-dependent Tafel analysis will facilitate a better understanding of the proton transfer behaviours during electrocatalytic processes and provide guidance for designing efficient electrocatalysts.

Chemistry↗
DOE OSTI2024

Non-linear dependence of ion heat flux on plasma density at the L–H transition of JET NBI-heated deuterium–tritium plasmas

Abstract Recent JET D–T campaigns opened the possibility of unique isotope studies to investigate the L–H transition physics in view of reactor plasmas and to study the origin of the observed power threshold minimum. In the present paper, we characterise L–H transitions in the low and high-density branches of JET NBI-heated D–T plasmas. As discussed in the paper, L–H transition has been hypothesised to be determined by the transport power losses of plasma ions, i.e. the so-called ion heat flux ( Q i ). We present the first power balance analysis of JET NBI-heated D–T plasmas to evaluate the ion heat flux at the transition. Due to the experimental setting being similar to previous JET D experiments, we also directly compare the results, discussing the isotope effect and similarities between datasets. First, we find an isotope effect between D and D–T Q i , with a lower Q i in D–T plasmas. We confirm that the ion heat flux deviates from density linearity compared to the linear trend observed in wave-heated D plasmas of other tokamaks. The deviation we observe in NBI-heated L–H transitions happens at an isotope-dependent density. Plasma edge rotation correlates with Q i deviation from density linearity in the low-density branch. However, further investigations would be required to assess the role of rotation on Q i and the power threshold minimum at JET. At low plasma density, NBI power dominates Q i , while increasing the density makes the equipartition power dominant. We finally compare our results with hypotheses proposed from evidence in other tokamaks to present a complete overview of ion heat flux analyses in D and D–T NBI-heated plasmas at JET.

Vincenzi, P. (ORCID:0000000251564354)↗
DOE OSTI2023

The role of isotope mass and transport for H-mode access in tritium containing plasmas at JET with ITER-like wall

The required heating power, $P_{\mathrm{LH}}$, to access the high confinement regime (H-mode) in tritium containing plasmas is investigated in JET with ITER-like wall at a toroidal magnetic field of $B_t = 1.8$ T and a plasma current of $I_p = 1.7$ MA. $P_{\mathrm{LH}}$, also referred to as the L-H power threshold, is determined in plasmas of pure tritium as well as mixtures of hydrogen with tritium (H-T) and mixtures of deuterium with tritium (D-T), and is compared to the L-H power threshold in plasmas of pure hydrogen and pure deuterium. It is found that, for otherwise constant parameters, $P_{\mathrm{LH}}$ is not the same in plasmas with the same effective isotope mass, $A_{\mathrm{eff}}$, when they differ in their isotope composition. Thus, $A_{\mathrm{eff}}$ is not sufficient to describe the isotope effect of $P_{\mathrm{LH}}$ in a consistent manner for all considered isotopes and isotope mixtures. The electron temperature profiles measured at the L-H transition in the outer half of the radius are very similar for all isotopes and isotope mixtures, despite the fact that the L-H power threshold varies by a factor of about six. This finding, together with the observation of an offset linear relation between the L-H power threshold, $P_{\mathrm{LH}}$, and an effective heat diffusivity, $\chi_{\mathrm{eff}}$, indicates that the composition-dependent heat transport in the low confinement mode (L-mode) determines, how much power is needed to reach the necessary electron temperatures at the edge, and hence $P_{\mathrm{LH}}$.

tritium plasmas↗
DOE OSTI2025

Nitrate-To-Ammonia Electroconversion at Neutral pH on Polycrystalline Vanadium Sulfide Derived from Vanadium Disulfide

The electrochemical nitrate reduction reaction (NO3RR) offers a pathway to produce NH3 for fuel and fertilizer from waste NO3-. In this work, a polycrystalline vanadium sulfide (VSx), which is derived from solvothermally grown and annealed VS2, is shown to exhibit excellent NO3RR activity (2.3 +- 0.6 mg.cm-2 geo..h-1 @ -0.92 VRHE) and Faradaic efficiency to NH4+ (69 +- 6% at -0.69 VRHE) in buffered neutral pH electrolyte containing 0.1 M NO3-. A variety of characterization techniques are leveraged to support the VSx assignment, including X-ray photoelectron spectroscopy, near-edge X-ray absorption fine structure spectroscopy, selected area electron diffraction, and X-ray diffraction measurements. The VS2 annealing step reduces the oxide character and generates VSx, which, based on the improved NO3RR activity, results in the creation of active sites for NO3- binding. To help shed light on NO3RR on VSx, VS2 is used as a model system, and a grand-canonical density functional theory (GC-DFT) investigation of VS2 shows strong evidence that S vacancies are active sites for NO3RR, where NO3- outcompetes H+ for adsorption at the S-vacancy sites. Moreover, GC-DFT results highlight a thermodynamically favorable reaction to generate NH4+ in an aqueous electrolyte at relevant cathodic potentials. As an annealed material, VSx may contain undersaturated V sites, which show an electronic structure similar to the theoretically calculated S-vacancy site of VS2, and these sites may contribute to the observed increase in NO3RR activity and selectivity for NH4+ on VSx versus unannealed VS2. Finally, kinetic isotope effect measurements suggest that the kinetic rate-limiting step of the NO3RR on VSx is not proton-coupled, indicating it may be the first electron transfer to adsorbed NO3*.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Isotopic mass effects of tritium-fueled high-performance TFTR supershots

An increase in total stored energy correlated with the addition of tritium fuel was observed in supershots during the TFTR DT campaign. This supershot regime had strikingly high, centrally peaked ion and electron temperatures, and the largest neutron emission rates observed in TFTR. This paper presents a study of the causes of this increase in stored energy in supershots. Twenty-six supershots have been recently reanalyzed with the TRANSP plasma analysis code. Early TRANSP simulations did not accurately match the measured magnitude and time evolutions of the neutron emission rates. This mismatch is attributed to neglecting apparent increases of trace amounts of heavy impurities during neutral beam injection. The new TRANSP runs were tuned to accommodate this and match the measured global neutron emission rates. These new runs also had improved fidelity in predicting the time histories and radial dependencies of measured DT neutron emission rates. That in turn adds confidence in the simulated thermal deuterium and tritium density profiles that are needed for calculating the average hydrogenic atomic mass profiles. Six subsets of these supershots had well matched toroidal field B tor , plasma current I p , flux geometry, and total injected neutral beam power. The mix of D and T beam ions was varied for different discharges. The magnitude of the increase of the thermal ion energy W i with added tritium was relatively small, and the total W tot increase is dominated by the increase in fast beam ions with T. Analyses at times before the occurrences of deleterious MHD instabilities yielded scaling of W tot with the volume-average isotopic mass consistent with previous publications. The relative fraction of fast energy ions is expected to be small in practical tokamak reactors. Thus the increase in stored energy W tot observed in TFTR supershots does not appear likely to be significantly helpful for producing useful fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

On the mechanism of intermolecular nitrogen-atom transfer from a lattice-isolated diruthenium nitride intermediate

Catalyst confinement within microporous media provides the opportunity to site isolate reactive intermediates, enforce intermolecular functionalization chemistry by co-localizing reactive intermediates and substrates in molecular-scale interstices, and harness non-covalent host–guest interactions to achieve selectivities that are complementary to those accessible in solution. As part of an ongoing program to develop synthetically useful nitrogen-atom transfer (NAT) catalysts, we have demonstrated intermolecular benzylic amination of toluene at a Ru 2 nitride intermediate confined within the interstices of a Ru2-based metal–organic framework (MOF), Ru 3 (btc) 2 X 3 (btc = 1,3,5-benzenetricarboxylate, i.e., Ru-HKUST-1 for X = Cl). Nitride confinement within the extended MOF lattice enabled intermolecular C–H functionalization of benzylic C–H bonds in preference to nitride dimerization, which was encountered with soluble molecular analogues. Detailed study of the kinetic isotope effects (KIEs, i.e., k H /k D ) of C–H amination, assayed both as intramolecular effects using partially labeled toluene and as intermolecular effects using a mixture of per-labeled and unlabeled toluene, provided evidence for restricted substrate mobility on the time scale of interstitial NAT. Analysis of these KIEs as a function of material mesoporosity provided approximate experimental values for functionalization in the absence of mass transport barriers. Here, we disclose a combined experimental and computational investigation of the mechanism of NAT from a Ru 2 nitride to the C–H bond of toluene. Computed kinetic isotope effects for a H-atom abstraction (HAA)/radical rebound (RR) mechanism are in good agreement with experimental data obtained for C–H amination at the rapid diffusion limit. These results provide the first detailed analysis of the mechanism of intermolecular NAT to a C–H bond, bolster the use of KIEs as a probe of confinement effects on NAT within MOF lattices, and provide mechanistic insights unavailable by experiment because rate-determining mass transport obscured the underlying chemical kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Deuteration removes quantum dipolar defects from KDP crystals

Abstract Dielectric properties of the hydrogen-bonded ferroelectric crystal KH 2 PO 4 (KDP) differ significantly from those of KD 2 PO 4 (DKDP). It is well established that deuteration affects the interplay of hydrogen-bond switches and heavy ion displacements that underlie the emergence of macroscopic polarization, but a detailed microscopic model is missing. We show that all-atom path integral molecular dynamics simulations can predict the isotope effects, revealing the microscopic mechanism that differentiates KDP and DKDP. Proton tunneling generates phosphate configurations that do not contribute to the polarization. At low temperatures, these quantum dipolar defects are substantial in KDP but negligible in DKDP. These intrinsic defects explain why KDP has lower spontaneous polarization and transition entropy than DKDP. The prominent role of quantum fluctuations in KDP is related to the unusual strength of the hydrogen bonds and should be equally important in other crystals of the KDP family, which exhibit similar isotope effects.

Yang, Bingjia (ORCID:0000000340749553)↗