SEARCH · Search NASA

Results for “jamming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2006

A Silent Safety Program

NASA's Columbia Accident Investigation Board (CAIB) referred 8 times to the NASA "Silent Safety Program." This term, "Silent Safety Program" was not an original observation but first appeared in the Rogers Commission's Investigation of the Challenger Mishap. The CAIB on page 183 of its report in the paragraph titled 'Encouraging Minority Opinion,' stated "The Naval Reactor Program encourages minority opinions and "bad news." Leaders continually emphasize that when no minority opinions are present, the responsibility for a thorough and critical examination falls to management. . . Board interviews revealed that it is difficult for minority and dissenting opinions to percolate up through the agency's hierarchy. . ." The first question and perhaps the only question is - what is a silent safety program? Well, a silent safety program may be the same as the dog that didn't bark in Sherlock Holmes' "Adventure of the Silver Blaze" because system safety should behave as a devil's advocate for the program barking on every occasion to insure a critical review inclusion. This paper evaluates the NASA safety program and provides suggestions to prevent the recurrence of the silent safety program alluded to in the Challenger Mishap Investigation. Specifically targeted in the CAM report, "The checks and balances the safety system was meant to provide were not working." A silent system safety program is not unique to NASA but could emerge in any and every organization. Principles developed by Irving Janis in his book, Groupthink, listed criteria used to evaluate an organization's cultural attributes that allows a silent safety program to evolve. If evidence validates Jams's criteria, then Jams's recommendations for preventing groupthink can also be used to improve a critical evaluation and thus prevent the development of a silent safety program.

Goodin, James Ronald↗

NASA NTRS2019

Advanced Colloids Experiment (Temperature Controlled) – ACE-T5

The attached will be presented at the JSC Science Symposium as a preview of the ACE-T5 flight experiment. The Principal Investigator (PI) for this experiment is Professor Ali Mohraz at the University of California - Irvine.Bijels (bicontinuous interfacially jammed emulsion gels) were discovered in 2007 at the University of Edinburgh. These materials feature a tubular, bicontinuous arrangement of two fluid phases separated by a monolayer of jammed colloidal particles at the interface.Because of their unique morphological characteristics, bijels hold significant promise as next-generation materials for energy and biotechnology applications. But in order to fully realize their potential, their physics and mechanical properties must be better understood. The mechanical properties and stability of bijels is mediated by an interplay between interfacial forces that impart elasticity to the system, and external stresses. Unfortunately, the interfacial forces are inherently coupled with density differences and cannot be studied systematically in the presence of gravity.

Mohraz, Ali↗

NASA NTRS2019

Mechanical Design and Configuration of Penetrations for the Europa Clipper Avionics Vault Structure

The main purpose of the Avionics Vault is to shield radiation sensitive electronics for the Europa Clipper Spacecraft. The vault is a box structure made out of aluminum panels. The panels are roughly 10 mm thick in order to shield the electronics from the orbital total ionizing radiation around Jupiter. The vault requires an electromagnetic interference (EMI) shielding effectiveness (SE) of at least 70 dB in order to mitigate EMI with the spacecraft radar receiver. Overall, the vault accommodates four main types of penetrations: receptacle connectors, pass-through cables, fluid lines, and vent holes. More than 150 cables penetrate the vault panels to connect to electronic boxes inside. Fluid pipes enter and exit the vault to transfer heat to the rest of the spacecraft. Vent holes provide a path for air to escape from the vault during launch. Several novel penetrations designs were created to meet EMI and radiation shielding requirements. Receptacle connectors interface to the vault panels using 1.3 mm thick Ta10W plates. Pass-through cables penetrate the vault using aluminum clamshells after being wrapped with Teflon cushion tape, Kapton tape, and copper tape. Vent hole penetrations consist of a copper mesh for EMI shielding and an aluminum radiation shield bracket to direct air out of the vault during launch. Fluid lines terminate at the vault wall using mechanical fittings that resemble a nut and bolt interface. In addition, most mechanical seams and penetrations utilize EMI gaskets to ensure proper EMI shielding. To reduce risk and confirm that the vault penetration designs were appropriate for EMI shielding, an EMI chamber at the Jet Propulsion Laboratory (JPL) was used to test a mock-up vault panel with multiple variations of all four main types of vault penetrations. This EMI SE test also incorporated different methods for bundling pass-through cables, and a comparison of flange mounted connectors versus jam nut connectors. A low noise preamplifier and a Rohde & Schwarz spectrum analyzer measured E-field levels transmitting through the mock-up vault panel. The results showed a shielding effectiveness of 77 dB for the mock-up vault panel, which exceeds the 70 dB target for Europa Clipper. Both the flange mounted connectors and jam nut connectors exhibited similar EMI SE results at the measured frequencies, and all variations of vault penetrations showed favorable EMI SE levels. Since the flight panels will be much larger and include many more penetrations, there will be testing of the flight vault to confirm its EMI SE is compliant with environmental requirements.

Giersch, Louis↗

NASA NTRS2020

Design and Development of a Robust Chuck Mechanism for the Mars2020 Coring Drill

The Sampling and Caching Subsystem (SCS) onboard the Mars2020 rover includes a coring drill that can perform coring, abrasion, and regolith collection operations. The coring drill requires a chuck mechanism to allow for the changing of the bits needed to perform sampling. The chuck mechanism must be capable of securely connecting a bit under drilling, rover slip, and pullout loads, but also readily release a bit after application of these loads. The Mars2020 chuck consists of a ball lock mechanism that allows for robust engagement and release of bit assemblies that is preloaded to ensure a secure, stiff connection between the bit assembly and the rest of the corer. To prevent jamming, the chuck incorporates rollers to preload the ball lock. The rollers are mounted onto a flexured cam that minimizes changes in internal mechanism loads that result from thermally induced dimensional changes, further mitigating the potential for jamming. The chuck mechanism is moved between engaged, disengaged, and loose chuck positions by rotating the cam with a gearmotor that incorporates a magnetic detent brake that prevents inadvertent mechanism motion under design loads. Ongoing testing is occurring on the qualification model in a dirty environment while coring and abrading rocks in a Mars representative environment.

Barletta, Anthony↗

DOE OSTI2025

Paper or Plastic? Multiscale Material Handling Properties of Two Model Municipal Solid Waste Streams

Purpose: Municipal Solid Waste (MSW) is a potentially valuable sustainable feedstock for fuel and chemical production due to its carbon-rich content and low cost. This study aims to assess the material handling properties of paperand plastic-rich MSW feedstocks to mitigate equipment failure and processing downtime. Methods: The material handling properties of crumbled MSW feedstocks were measured using apowder rheometer with mass flow hopper calculations to assess handling performance. Inverse gas chromatography was use to measure the surface energy differences between feedstocks. Electron microscopy and Raman spectroscopy was used to evaluate microscale features that may contribute to material handling differences. Results: Plastic and paper rich feedstocks crumbled to a nominal 2 mm particle size were observed to have similar flow and handling characteristics with reasonable hopper outlets. 2 mm plastic rich crumbles, with their higher bulk density, exhibited superior flow performance. By contrast, 4 mm material required significantly larger hopper outlets, indicating poor flowability. Paper rich and 4 mm plastic rich samples displayed broad particle size distributions, which contributed to particle interlocking, jamming, and other flow issues. Electron microscopy revealed that plastic rich samples were significantly smoother, enhancing their flowability compared to the rougher, paper rich materials. Conclusions: This study establishes critical material handling baselines for processing MSW as a viable feedstock for fuel and chemical production. The findings highlight the importance of optimizing particle size and feedstock composition to improve flowability and handling performance.

09 BIOMASS FUELS↗

DOE OSTI2025

Probing the shear-induced microstructure of a smectite clay aqueous suspensions using rheo-USANS and rheo-SIPLI measurements

Hypothesis: The static microstructure of aqueous sodium-montmorillonite (Na-Mt) suspensions at low ionic strengths (where Particle Size/Debye Length ≈1) exhibits both the particle–particle ordering as well as aggregation with repulsive ordered domains having characteristic optical birefringence and attractive aggregated entities larger than 20 µm resulting in ever-increasing yield stresses also known as physical aging-rejuvenation behavior. We hypothesize that the attractive particle–particle aggregation is the underlying cause behind the physical aging-rejuvenation behavior observed in Na-Mt suspensions with no contribution from structural dynamics driven by repulsive particle–particle ordering or jamming. Experiments: We investigate the shear-induced microstructure of aqueous Na-Mt suspensions in the sol and gel state using rheo-ultra-small angle neutron scattering (rheo-USANS) experiments at shear rates of 1, 50, 500, and 2000 s −1 . We also perform rheo-shear-induced polarization light imaging (rheo-SIPLI) experiments to relate ordering with shearing and aging. Findings: Shearing the suspensions at low to moderate shear rates induces particle–particle aggregation and shearing at high shear rates induces the breakage of particle–particle aggregation in the sol and gel states, suggesting the microstructural aggregation in the sol and gel state is shear sensitive and a full rejuvenation or breakage of particle–particle aggregation is only achieved at a minimum critical shear rate. The rheo-SIPLI experiments reveal that the sol and gel state exhibited strong Maltese cross patterns at a shear rate of 1000 s −1 , indicating particle–particle ordering. Post shearing, the gel exhibited temporal evolution of storage modulus without any noticeable influence on the appearance of the Maltese cross pattern indicating physical aging and particle ordering are distinct length scale phenomena in Na-Mt suspensions and the physical aging-rejuvenation behaviour is a feature of particle–particle aggregation as opposed to ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Measurement of kaon directed flow in Au+Au collisions in the high baryon density region

Rapidity-odd directed flow v 1 measurements are presented for $K^±$ and $K^0_S$ in Au + Au collisions for $\sqrt{s_{NN}}$ from 3.0 to 3.9 GeV with the STAR experiment. For comparison, v 1 of π ± , protons, and Λ from the same collisions are also discussed. The mid-rapidity v 1 slope dv 1 /dy| y=0 for protons and Λ is positive in these collisions. On the other hand, v 1 slope of kaons exhibits a strong dependence: negative at p T < 0.6 GeV/c and positive at higher p T . A similar p T dependence is also evident for the v 1 slope of charged pions. Compared to the spectator-removed calculations in Au+Au collisions at $\sqrt{s_{NN}}$ = 3.0–3.9 GeV, the JAM model demonstrates a pronounced shift of the v 1 slopes of mesons towards the negative direction. It suggests that the shadowing effect of the spectators plays an important role in the observed kaon anti-flow at low p T in the high baryon density region of non-central collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2024

Insights into Preceramic Polymer-Based Additive Manufacturing Inks via Rheological and Scattering Studies of Preceramic Polymer-Grafted Nanoparticles Suspended in Polycarbosilane

Preceramic polymers (PCPs) offer advantages in producing ceramics due to their processability and ability to tailor the final chemistry of the produced material. However, challenges such as volumetric shrinkage and mass loss during pyrolysis often result in polymer-derived ceramics containing pores and cracks. PCP-grafted ceramic nanoparticles (PCPGNPs) have been proposed and studied as a route to mitigate the shrinkage issues associated with neat PCPs. Prior studies on PCPGNPs have principally focused on the synthesis and characterization of neat materials. Dispersing PCPGNPs in commercial preceramic polymer is another attractive, but underexplored, route to control the rheological and char yield properties of PCP systems. In this work, a systematic rheological study of commercial PCP (SMP-877) and PCPGNP (silica with poly(1,1-dimethylpropylsilane) corona) mixtures was executed to develop design rules for the processing of such systems. A rheological study demonstrated the effect of increasing particle concentration on network formation with percolation occurring between 50 and 60 wt %. Samples above the percolation threshold exhibited higher viscosities and rapid shear thinning thus demonstrating their direct-write printability. X-ray photon correlation spectroscopy (XPCS) corroborated the rheology and showed two diffusive modes when the material was above percolation. Mixtures of PCPGNPs and SMP-877 had synergistically higher char yields upon thermal treatment and pyrolysis. XPCS and rheological measurements during thermal treatment identified thermal jamming of the polymer grafts as a key factor in improving the char yield. In conclusion, with the insights gained here, we expect these mixed systems to provide attractive feedstocks for polymer-derived ceramics, with proof-of-principal application as feedstocks for direct ink write (DIW) additive manufacturing.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Structured liquid-based reconfigurable all-liquid optical fibers

Quartz optical fibers are brittle, difficult to repair, and lack reconfigurability, limiting their adaptability in underwater communication. To overcome these impediments, here we show reconfigurable all-liquid optical fibers (RAOFs) produced by structured liquid, tuned by the interfacial assembly and jamming of nanoparticle surfactants at the water-oil interface (interfacial tension <10 mN m -1 , refractive index contrast of 0.083). These RAOFs combine the structural stability of the interfacial assemblies with the inherent flexibility of liquids. They support real-time communication on an Ethernet platform (up to 1 Gbps), providing a practical alternative to conventional optical fibers for optical interconnects. Their liquid nature enables broken fibers to be repaired rapidly by a coalescence process. Their softness affords on-demand reconfigurability that enables in-situ fabrication of reconfigurable optical fibers and dynamic manipulation of signal transmission. RAOFs provide a versatile, self-healing, and resilient solution for optical communication systems in dynamic environments.

Zhao, Sai [City University of Hong Kong, Kowloon (↗

DOE OSTI2025

Fatty acid foams for nonselective physical removal of microplastics from aqueous solutions

Microplastics (MPs) are pervasive environmental contaminants whose removal from water remains a major challenge due to their small size, chemical diversity, and dynamic surface properties arising from environmental aging/weathering. Here, we present a concept of foam-based separation method that physically traps MPs in the foam phase using microtubular assemblies of 12-hydroxystearic acid. These foams are stabilized by anisotropic fatty acid microtubules formed in the presence of ethanolamine, which jam within the foam channels and suppress fluid drainage thereby enhancing MP retention and foam stability. MPs of different sizes, polymer compositions (including polystyrene, polypropylene, polyethylene terephthalate, and polytetrafluoroethylene), and weathered states were retained in the foam phase without requiring chemical modification or relying on chemical interactions between the fatty acid and MPs. Thermally induced transition of the fatty acid microtubules into nanomicelles above the characteristic phase transition temperature (∼35 °C) enables controlled foam collapse and recovery of trapped MPs. The cumulative removal efficiency can exceed 85% through multiple foaming cycles, matching predictions from a probabilistic retention model. This work shows that foams can provide a simple platform to trap MPs, thus providing a new physical-removal strategy that does not rely on the particles’ chemistry.

Guillot, Kennedy A. [Louisiana State Univ., Baton ↗

DOE OSTI2026

Ion transport through reconfigurable nanoparticle-surfactant stabilized droplet interface bilayers

Despite their adaptability and mechanical stability, Pickering emulsions based on the interfacial assembly of colloidal particles have not found use in iontronics, since the dense interfacial packing of micron-sized particles precludes functional connectivity between two droplets. In this work, we introduce a chemically reconfigurable droplet interface bilayer (DIB) platform based on the interfacial assembly of nanoparticle-surfactants (NPSs) that enables spontaneous or field-induced formation of ion-conducting nanochannels, eliminating the need of ionophores or nanochannel-forming proteins. These nanoscopic channels emerge from packing defects in the jammed interfacial assemblies of the charged NPSs and support size and charge selective, hysteretic ion transport governed by interfacial electrostatics and dimensional constraints. The NPS-DIBs show short-term and long-term plasticity, hallmarks of neuromorphic behavior, that are mediated by the structural and chemical design of the bilayer. These assemblies establish a versatile, chemically tunable platform that couples soft-matter mechanics with interfacial ionic functionality, offering a robust foundation for soft iontronic systems.

36 MATERIALS SCIENCE↗

DOE OSTI2025

First study of polarized proton-proton scattering with small-𝑥 helicity evolution

We perform a phenomenological study of helicity-dependent parton distribution functions (PDFs) using small-𝑥 helicity evolution equations, incorporating for the first time single-inclusive jet production data in polarized proton-proton (𝑝⁢𝑝) scattering at parton momentum fractions 𝑥 <0.1. We also simultaneously include double-longitudinal spin asymmetries in inclusive and semi-inclusive deep-inelastic scattering probing 𝑥 <0.1. Employing the polarized small-𝑥 pure-glue calculation of 𝑝⁢𝑝 → 𝑔⁡𝑋 for the jet production cross section, we modify the large-𝑁 𝑐 &𝑁 𝑓 KPS-CTT evolution equations by setting 𝑁 𝑓 = 0 to replicate the large-𝑁𝑐 (pure-glue) limit, while retaining external quark flavors for the spinor field operators. We find that the 𝑝⁢𝑝 data have a considerable impact on the helicity PDFs at small 𝑥, reducing their uncertainties and leading to a total quark and gluon helicity in the proton for 𝑥 < 0.1 of −0.04 ±0.23. Combining our analysis with a recent JAM helicity PDF analysis of the world polarized data, which includes 𝑥 > 0.1, we find a total quark and gluon helicity contribution for 𝑥 >10 −7 of between 0.02 and 0.51.

Adamiak, Daniel [Michigan State University] (ORCID↗

DOE OSTI2024

Gluon moment and parton distribution function of the pion from 𝑁 𝑓 = 2 +1 +1 lattice QCD

We present the first calculation of the pion gluon moment from lattice QCD in the continuum-physical limit. The calculation is done using clover fermions for the valence action with three pion masses, 220, 310 and 690 MeV, and three lattice spacings, 0.09, 0.12, and 0.15 fm, using ensembles generated by MILC Collaboration with 2+1+1 flavors of highly improved staggered quarks (HISQ). On the lattice, we nonperturbatively renormalize the gluon operator in RI/MOM scheme using the cluster-decomposition error reduction (CDER) technique to enhance the signal-to-noise ratio of the renormalization constant. We extrapolate the pion gluon moment to the continuum-physical limit and obtain ⟨𝑥⟩ 𝑔 = 0.394⁢(58) stat+NPR ⁢(39) mixing in the $\overline{MS}$ scheme at 2 GeV, with first error being the statistical error and uncertainties in nonperturbative renormalization, and the second being a systematic uncertainty estimating the effect of ignoring quark mixing. Our pion gluon momentum fraction has a central value lower than two recent single-ensemble lattice-QCD results near physical pion mass but is consistent with the recent global fits by JAM and xFitter and with most QCD-model estimates.

Astronomy & Astrophysics↗

DOE OSTI2025

Heterogeneous Dynamics in Shear Thickening Colloids Revealed by Intrinsic Heterodyne Correlation Spectroscopy

Shear induced frictional networks have been proposed to be responsible for the emergence of discontinuous shear thickening (DST) in complex fluids. However, little experimental evidence exists to support this model directly. Here, in this study, using x-ray photon correlation spectroscopy (XPCS), we show the existence of an intrinsic heterodyne feature during shear cessation, which originates from the relative motion of mobile particles against an aggregated or jammed network induced by shear thickening. Upon removing the shear, the shear stress dissipates rather quickly in a two-step fashion, whereas the heterogeneous particle dynamics persist much longer with the relative velocity decaying slowly with time as 𝑡 −1 . More importantly, both continuous shear thickening (CST) and DST show similar heterodyne features, indicating the intrinsic mechanisms causing shear thickening are similar in nature

Complex fluid↗

DOE OSTI2025

Precision measurement of the longitudinal double-spin asymmetry for dijet production at intermediate pseudorapidity in polarized 𝑝⁢𝑝 collisions at $\sqrt{s}$ = 200 GeV

The STAR Collaboration reports precise measurements of the longitudinal double-spin asymmetry, 𝐴 𝐿⁢𝐿 , for dijet production with at least one jet at intermediate pseudorapidity 0.8 < 𝜂 jet < 1.8 in polarized proton-proton collisions at a center-of-mass energy of 200 GeV. This study explores partons scattered with a longitudinal momentum fraction (𝑥) from 0.01 to 0.5, which are predominantly characterized by interactions between high-𝑥 valence quarks and low-𝑥 gluons. The results are in good agreement with previous measurements at 200 GeV with improved precision and are found to be consistent with the predictions of global analyses that find the gluon polarization to be positive. In contrast, the negative gluon polarization solution from the JAM Collaboration is found to be strongly disfavored.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Traffic Control via Connected and Automated Vehicles (CAVs): An Open-Road Field Experiment with 100 CAVs

The CIRCLES project aims to reduce instabilities in traffic flow, which are naturally occurring phenomena due to human driving behavior. Also called “phantom jams” or “stop-and-go waves,” these instabilities are a significant source of wasted energy. Toward this goal, the CIRCLES project designed a control system, referred to as the MegaController by the CIRCLES team, that could be deployed in real traffic. Our field experiment, the MegaVanderTest (MVT), leveraged a heterogeneous fleet of 100 longitudinally controlled vehicles as Lagrangian traffic actuators, each of which ran a controller with the architecture described in this article. The MegaController is a hierarchical control architecture that consists of two main layers. The upper layer is called the Speed Planner and is a centralized optimal control algorithm. It assigns speed targets to the vehicles, conveyed through the LTE cellular network. The lower layer is a control layer, running on each vehicle. It performs local actuation by overriding the stock adaptive cruise controller, using the stock onboard sensors. The Speed Planner ingests live data feeds provided by third parties as well as data from our own control vehicles and uses both to perform the speed assignment. The architecture of the Speed Planner allows for the modular use of standard control techniques, such as optimal control, model predictive control (MPC), kernel methods, and others. The architecture of the local controller allows for the flexible implementation of local controllers. Corresponding techniques include deep reinforcement learning (RL), MPC, and explicit controllers. Depending on the vehicle architecture, all onboard sensing data can be accessed by the local controllers or only some. Likewise, control inputs vary across different automakers, with inputs ranging from torque or acceleration requests for some cars to electronic selection of adaptive cruise control (ACC) setpoints in others. The proposed architecture technically allows for the combination of all possible settings proposed previously, that is {Speed Planner algorithms} × {local Vehicle Controller algorithms} × {full or partial sensing} × {torque or speed control}. As a result, most configurations were tested throughout the ramp up to the MegaVandertest (MVT).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2026

Secure Time Synchronization in Power Grids and Network HIL Synchrophasor Testing

Reliable and secure time synchronization underpins the monitoring and control functions of modern power grids. As GPS-based timing infrastructures grow more susceptible to spoofing and jamming, their vulnerabilities pose escalating risks to grid stability. This work investigates a secure, resilient timing framework that can serve as an alternative or redundant source for power grids, with a particular focus on synchrophasorbased applications. A candidate timing system architecture is evaluated to guarantee trustworthy time dissemination, even in degraded conditions. A network hardware-in-the-loop testing of two synchrophasors validates the concepts, demonstrating enhanced timing integrity, improved detection of timing anomalies, and sustained observability during adverse timing events.

Wu, Ori [ORNL] (ORCID:0000000326723410)↗

DOE OSTI2024

Bringing randomized algorithms to mainstream numerical linear algebra

Numerical linear algebra (NLA) underpins huge swaths of computational science and engineering. For scientists and engineers to make the most of the DOE’s computing resources, it is essential that they have access to high-performance implementations of algorithms with best-in-class scalability and reliability. Despite this, prevailing NLA libraries have little to no support for breakthrough algorithms from the field of randomized numerical linear algebra (RandNLA) that have been developed over the past twenty years. The goal of this LDRD was to break a log-jam that had prevented broad adoption of RandNLA. Our work had two thrusts. The first was to develop RandBLAS: a trustworthy and high-performance C++ library for randomized dimension reduction (an operation widely known as sketching). The second was the development of a novel randomized algorithm for computing a challenging type of matrix decomposition known as Householder QR with column pivoting (Householder QRCP). In this one-year late-start LDRD we successfully delivered RandBLAS 1.0 and new CPU and GPU codes for Householder QRCP. RandBLAS has extensive documentation at https://randblas.readthedocs.io/en/stable/. Papers on RandBLAS and and our high-performance QRCP codes are forthcoming.

97 MATHEMATICS AND COMPUTING↗