Search NASA⌕ Search

SEARCH · Search NASA

Results for “key identification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Identification of Suitable Vacuum Gas Oils as Plasticizers Using HT-GC × GC-HRMS

Vacuum gas oils (VGOs) have long been heralded as effective plasticizers due to their high boiling-points and lubricating properties. One of these VGOs, HyVac Oil 93050, is a paraffinic plasticizer that is currently utilized in polymer–plasticizer explosive formulations, while this oil effectively increases the elasticity and decreases the sensitivity for current formulations. We seek to identify alternative VGOs with similar density, viscosity, molecular composition, and impurities for future formulations. In this study, 18 VGOs, including HyVac Oil 93050, were initially evaluated for their density and viscosity. The oils were then ranked based on physical characteristics and analyzed for molecular composition using high-temperature comprehensive two-dimensional gas chromatography with high-resolution time-of-flight mass spectrometry (HT-GC × GC-HRMS). Further, the HT-GC × GC-HRMS chromatograms of the top 10 most similar VGOs to HyVac Oil 93050, according to density, were compared utilizing the Pearson correlation coefficient. Three of the oils with densities similar to those of HyVac Oil 93050 had a Pearson correlation within the lot-to-lot variation of HyVac Oil 93050. For the top 3 candidates, Pearson correlation was then utilized as a feature selection technique to discover significant chemical differences. Positive chemical ionization (PCI) and negative chemical ionization (NCI) HT-GC × GC-HRMS chromatograms were also evaluated and aided in the discovery and identification of several key compounds including additives that acted as stabilizers for the VGOs. After this further chemical analysis, two of the original 17 potential VGOs were determined to be physically and chemically similar to HyVac Oil 93050.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Guided construction of single cell reference for human and mouse lung

Accurate cell type identification is a key and rate-limiting step in single-cell data analysis. Single-cell references with comprehensive cell types, reproducible and functionally validated cell identities, and common nomenclatures are much needed by the research community for automated cell type annotation, data integration, and data sharing. Here, we develop a computational pipeline utilizing the LungMAP CellCards as a dictionary to consolidate single-cell transcriptomic datasets of 104 human lungs and 17 mouse lung samples to construct LungMAP single-cell reference (CellRef) for both normal human and mouse lungs. CellRefs define 48 human and 40 mouse lung cell types catalogued from diverse anatomic locations and developmental time points. We demonstrate the accuracy and stability of LungMAP CellRefs and their utility for automated cell type annotation of both normal and diseased lungs using multiple independent methods and testing data. We develop user-friendly web interfaces for easy access and maximal utilization of the LungMAP CellRefs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Strong spin–orbit quenching via the product Jahn–Teller effect in neutral group IV qubits in diamond

Abstract Artificial atom qubits in diamond have emerged as leading candidates for a range of solid-state quantum systems, from quantum sensors to repeater nodes in memory-enhanced quantum communication. Inversion-symmetric group IV vacancy centers, comprised of Si, Ge, Sn, and Pb dopants, hold particular promise as their neutrally charged electronic configuration results in a ground-state spin triplet, enabling long spin coherence above cryogenic temperatures. However, despite the tremendous interest in these defects, a theoretical understanding of the electronic and spin structure of these centers remains elusive. In this context, we predict the ground-state and excited-state properties of the neutral group IV color centers from first principles. We capture the product Jahn–Teller effect found in the excited state manifold to second order in electron–phonon coupling, and present a nonperturbative treatment of the effect of spin–orbit coupling. Importantly, we find that spin–orbit splitting is strongly quenched due to the dominant Jahn–Teller effect, with the lowest optically-active 3 E u state weakly split into m s -resolved states. The predicted complex vibronic spectra of the neutral group IV color centers are essential for their experimental identification and have key implications for use of these systems in quantum information science.

Materials Science↗
DOE OSTI2023

Dual factors required for cytochrome-P450-mediated hydrocarbon ring contraction in bacterial gibberellin phytohormone biosynthesis

Cytochromes P450 (CYPs) are heme-thiolate monooxygenases that prototypically catalyze the insertion of oxygen into unactivated C–H bonds but are capable of mediating more complex reactions. One of the most remarked-upon alternative reactions occurs during biosynthesis of the gibberellin A (GA) phytohormones, involving hydrocarbon ring contraction with coupled aldehyde extrusion of ent-kaurenoic acid to form the first gibberellin intermediate. While the unusual nature of this reaction has long been noted, its mechanistic basis has remained opaque. Building on identification of the relevant CYP114 from bacterial GA biosynthesis, detailed structure–function studies are reported here, including development of in vitro assays as well as crystallographic analyses both in the absence and presence of substrate. These structures provided insight into enzymatic catalysis of this unusual reaction, as exemplified by identification of a key role for the “missing” acid from an otherwise highly conserved acid–alcohol pair of residues. Notably, the results demonstrate that ring contraction requires dual factors, both the use of a dedicated ferredoxin and absence of the otherwise conserved acidic residue, with exclusion of either limiting turnover to just the initiating and more straightforward hydroxylation. The results provide detailed insight into the enzymatic structure–function relationships underlying this fascinating reaction and support the use of a semipinacol mechanism for the unusual ring contraction reaction.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

C-terminal conformational changes in SCF-D3/MAX2 ubiquitin ligase are required for KAI2-mediated signaling

Karrikins (KARs) are bioactive molecules derived from burning vegetation. Plants perceive KARs through the hydrolase KARRIKIN INSENSITIVE 2 (KAI2) that interacts with the F-box protein ubiquitin ligase MORE AXILLARY GROWTH 2 (MAX2). MAX2 also plays a role in the perception and signal activation by Strigolactone (SL), a phytohormone controlling various developmental processes in plants. SL also acts as a rhizosphere signal to activate arbuscular mycorrhiza fungi that can be exploited by parasitic plants. kai2 knockouts exhibit distinct developmental defects and therefore KAI2 is hypothesized to perceive an unidentified endogenous ligand provisionally termed KAI2-Ligand (KL). Upon KAR/KL perception, the protein complex of KAI2-MAX2 targets SUPPRESSOR OF MAX2-1/2 (SMAX1)/SMXL2 for proteasomal degradation. Despite the identification of the key components KAI2, MAX2, and SMAX1 in KAR/KL signaling, their mode of interaction and regulation remains elusive. Recently, the regulatory function of the conformational switch of MAX2 C-terminal helix (CTH) in SL signaling has been demonstrated however its role in KAR/KL signaling remained unknown. Here we address the function of MAX2-CTH dynamics both in vitro and in planta and show that the central role of CTH is conserved between SL and KAR/KL signaling pathway.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Predicting the Rate of Degradation Related to Oxygen Electrode Delamination in Solid Oxide-Ion Electrolyzers

One of the leading causes for the performance degradation in H 2 -producing solid oxide electrolytic cells (SOECs) is the gradual delamination of oxygen electrode (OE) from the electrolyte under a strong anodic polarization. Identification of the key factor that controls the rate of OE delamination is of paramount importance to achieve long-term stable operation of SOECs. Here we show from thousands of hours of testing data that the exchange current density (i°) of OE can be leveraged as a predictor for the rate of delamination. To obtain i°, we apply DC-biased electrochemical impedance spectroscopy on a three-electrode symmetrical cell to measure polarization resistance (R p ) of OE as a function of current density (i) and time (t). The collected R p -i-t raw data are then converted to overpotential ( η )-i-t, from which i° is extracted from the “low-field” approximation. An analytical relationship between i° and time-to-delamination (TTD) is further established from the established i°-i-t relationship. We show that under a constant anodic polarization current density i, the greater the ratio i/i°, the faster the delamination. Therefore, we conclude that the exchange current density of an OE, i°, can be used to predict the rate of OE degradation in solid oxide-ion electrolyzers.

25 ENERGY STORAGE↗
DOE OSTI2020

Organizational Conflicts of Interest Disclosure Update Statement (FY2019)

The National Technology & Engineering Solutions of Sandia, LLC (NTESS) Prime Contract department manages an organizational conflicts of interest (OCI) program that is designed to provide NTESS employees an accessible means to assist in identifying potential OCI risk and providing development support services to avoid, neutralize, or mitigate the risk. The OCI program is responsible for maintaining a regulatory infrastructure, such as corporate OCI policy and training content, to comply with NTESS's obligations set forth in prime contract clauses H-4: ORGANIZATIONAL CONFLICT OF INTEREST (OCI) — SPECIAL PROVISION and Section I Department of Energy Acquisition Regulation 952.209-72, Organizational Conflicts of Interest, Alternate I, paragraph (c)(1), Disclosure After Award. Risk identification is a key OCI program priority. Providing employees with a straight-forward, accessible and navigable mechanism to identify potential OCI risk will assist the OCI program in meeting this priority.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗
DOE OSTI2022

Battery500 Consortium: Development of High-Capacity Cathodes and Robust Solid Electrolytes

The goal off this EERE-BMR-Battery 500 consortium project was to provide the supporting science and to lead the Keystone 1 project. Key findings include: identification of 1st cycle loss of high nickel NMC materials as a major opportunity to increase the capacity of these cathode materials. The selective use of substituents and surface coatings was identified as a potential way of decreasing the 1st cycle loss and in increasing capacity retention. Niobium at around the 1% level was found to be optimum. In addition, operando DSC was utilized to scope out the stability range of electrolytes developed by the Battery 500 team.

25 ENERGY STORAGE↗
DOE OSTI2022

Integration of Pumped Heat Energy Storage with Fossil-Fired Power Plant (Final Report)

The project team of Southwest Research Institute ® (SwRI ® ), Malta Inc. (Malta), and Luminant Generation Company LLC (Luminant) completed a feasibility study for the integration of a 100-MW, 10-hour (1000-MWh) Malta Pumped Heat Energy Storage (MPHES) system with multiple full-sized fossil-fired electricity generation units (EGU) in Luminant portfolio. MPHES is a long-duration, molten-salt-energy storage technology that uses turbomachinery and heat exchangers to transfer energy to a thermal storage media when charging, and removes the heat in a similar fashion when discharging. With high round trip efficiency (60-65%) and long lifespan (30+ years), MPHES provides economic benefits to the fossil-asset owners that can be scaled to integrate with assets across their portfolio. This technology uses hardware components, workforce personnel, and skillsets similar to those used by fossil EGUs, allowing for synergy when co-locating the two technologies. Luminant has approximately 39,000 megawatts of generation across 12 states, operating in six of the seven competitive markets in the U.S. and powered by a diverse portfolio of natural gas, nuclear, coal, and solar facilities. The DeCordova plant in Granbury, Texas, a simple cycle natural gas peaker power plant, was used as the fossil-fired asset in this project. The local market in Granbury, Texas has many influences, including several nearby power plants, a Luminant-owned nuclear plant (Comanche Peak), and substantial wind energy, which causes both negative pricing at night and high market volatility. Reducing false starts of the DeCordova plant and better responding to market volatility would be an economic advantage. Luminant is currently integrating battery storage plant on site to begin addressing these challenges. Integrating long-duration storage, like MPHES, would expand this capability beyond one hour of storage and have the potential to greatly reduce the total number of gas turbine starts. The MPHES charging requirement could help offset the overnight operating costs of Comanche Peak, which cannot load follow, and the nearby Luminant-owned Wise County combined cycle plant that cycles too often. Following the assessment of Luminant’s ERCOT-based portfolio for integration compatibility with Malta’s PHES system and the project tasks of conceptual study, technoeconomic analysis, technology gap assessment, and commercialization plan, the project team effort has resulted in several key outcomes: (1) Identification of market trends in a high-wind penetration market outside a major metropolitan area; (2) Creation of a dispatching model for the MPHES system and the pairing of Li-ion battery with a gas turbine in a real time market; (3) Revenue and cost estimations for operating MPHES alongside a gas peaker plant with real dispatching considerations and comparison with variations in the Malta implementation, including doubling the storage capacity and using two discharge drivetrains; (4) Potential carbon emission reductions possible by replacing gas turbine operation with Malta PHES operation; and (5) Summary of literature-based future market predictions for Texas.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2023

Neutral Atomic Beam Techniques for Diagnosis of Edge and Scrape-Off Layer Plasmas (2017-2019) [and subsequently titled] Neutral Atomic Beam Techniques for Diagnosis of Interior and Scrape-Off Layer Plasmas (2019-2022) (Final Report)

This is the Final Technical Report for the DOE Measurement Innovation grant DE-SC0017998 titled Neutral Atomic Beam Techniques for Diagnosis of Edge and Scrape-Off Layer Plasmas (2017-2019) and subsequently titled Neutral Atomic Beam Techniques for Diagnosis of Interior and Scrape-Off Layer Plasmas (2019-2022). The grant was funded by the Office of Fusion Energy Sciences (FES) for the period 1 September 2017 – 31 May 2022. Work performed through the grant has resulted in diagnostic innovations and new measurement capabilities that could improve understanding of magnetic equilibrium, edge localized modes in tokamaks, and bootstrap and Pfirsch-Schlüter currents in stellarators. We have performed simulations of a novel non-hydrogen beam-based diagnostic that would determine a local value (in the plasma) of the poloidal flux function by measuring the toroidal angle of the beam particles' velocity at a detector external to the plasma. The approach is similar to that of a Heavy Ion Beam Probe (HIBP), but would be able to operate with a smaller, more economical detection systems and, in doing so, may enable substantial extension of scenarios in which beam-based diagnostics are deployed. Key results include: Identification of the neutral and singly charged atoms that are most appropriate for use in the beam based diagnostic and the ionization cross-sections that are important for studying the plasma edge of a large device; Development of a promising geometry for operation in which the beam is injected horizontally near the torus midplane; Implementation of simulations using banana orbit trajectories of secondary beam ions to access plasma regions that are commonly in-accessible to an HIBP diagnostic, including sample volumes near the X-point of a diverted tokamak; Assessment of the ability of the diagnostic concept (originally developed under the assumption of, and reliant on, symmetry) to work in stellarators by performing simulations with both quasi-symmetric fields and non-quasi-symmetric fields; Measurement of noise levels with a prototype detector on a stellarator and exploration of techniques to minimize effects of noise on a diagnostic.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Fermi -LAT follow-up observations in seven years of real-time high-energy neutrino alerts

The realtime program for high-energy neutrino track events detected by the IceCube South Pole Neutrino Observatory releases alerts to the astronomical community with the goal of identifying electromagnetic counterparts to astrophysical neutrinos. Gamma-ray observations from theFermi-Large Area Telescope (LAT) enabled the identification of the flaring gamma-ray blazar TXS 0506+056 as a likely counterpart to the neutrino event IC-170922A. By continuously monitoring the gamma-ray sky,Fermi-LAT plays a key role in the identification of candidate counterparts to realtime neutrino alerts. In this paper, we present theFermi-LAT strategy for following up high-energy neutrino alerts applied to seven years of IceCube data. Right after receiving an alert, a search is performed in order to identify gamma-ray activity from known and newly detected sources that are positionally consistent with the neutrino localization. In this work, we study the population of blazars found in coincidence with high-energy neutrinos and compare them to the full population of gamma-ray blazars detected byFermi-LAT. We also evaluate the relationship between the neutrino and gamma-ray luminosities, finding different trends between the two blazar classes BL Lacs and flat-spectrum radio quasars.

Astronomy & Astrophysics↗
DOE OSTI2023

Distribution System Model Calibration for GMLC 3.3.3 "Incipient Failure Identification for Common Grid Asset Classes" - Project Summary

Distribution system model calibration is a key enabling task for incipient failure identification within the distribution system. This report summarizes the work and publications by Sandia National Laboratories on the GMLC project titled “Incipient Failure Identification for Common Grid Asset Classes”. This project was a joint effort between Sandia National Laboratories, Lawrence Livermore National Laboratory, National Energy Technology Laboratory, and Oak Ridge National Laboratory. The included work covers distribution system topology identification, transformer groupings, phase identification, regulator and tap position estimation, and the open-source release and implementation of the developed algorithms.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2024

Lithium Storage Mechanisms and Electrochemical Behavior of a Molybdenum Disulfide Nanoparticle Anode

This study investigates the electrochemical behavior of molybdenum disulfide (MoS 2 ) as an anode in Li-ion batteries, focusing on the extra capacity phenomenon. Employing advanced characterization methods such as in situ and ex situ X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscopy, the research unravels the complex structural and chemical evolution of MoS 2 throughout its cycling. A key discovery is the identification of a unique Li intercalation mechanism in MoS 2 , leading to the formation of reversible Li x MoS 2 phases that contribute to the extra capacity of the MoS 2 electrode. Density function theory calculations suggest the potential for overlithiation in MoS 2 , predicting Li 5 MoS 2 as the most energetically favorable phase within the lithiation–delithiation process. Additionally, the formation of a Li-rich phase on the surface of Li 4 MoS 2 is considered energetically advantageous. After the first discharge, the battery system engages in two main reactions. One involves operation as a Li-sulfur battery within the carbonate electrolyte, and the other is the reversible intercalation and deintercalation of Li in Li x MoS 2 . The latter reaction contributes to the extra capacity of the battery. The incorporation of reduced graphene oxide as a conductive additive in MoS 2 electrodes notably improves their rate capability and cycling stability.

Lithium Rich Phase↗
DOE OSTI2025

Revisiting point defect thermodynamics in group IVB and VB transition metal carbides

We present a comprehensive re-examination of point defect thermodynamics in group IVB and VB transition metal carbides (TMCs) with the rocksalt structure using a combination of density functional theory (DFT) calculations and a statistical mechanical Wagner-Schottky model within the canonical ensemble. The most stable configurations of point defects were discovered using basin-hopping global optimization, driven by either a machine learning interatomic potential (MLIP) or DFT. A key finding is the identification of previously unreported dicarbon antisites—a C–C dimer occupying a metal site—as the structural (constitutional) defects on the carbon-rich side of stoichiometry in all group IVB and VB TMCs except TaC. Furthermore, dicarbon antisite-containing thermal defect complexes, such as quadruple and interbranch defects, can dominate in TMCs under specific stoichiometric and temperature conditions. In conclusion, by incorporating dicarbon antisites into the defect landscape, this work provides a revised understanding of the thermodynamics of point defects in TMCs.

Carbides↗
DOE OSTI2025

Two-frequency RF fields induced multipactor in coaxial transmission lines

This study presents a comprehensive investigation of two-surface multipactor discharge in coaxial transmission lines under two-frequency radio frequency (RF) excitation using one-dimensional Monte Carlo simulations validated against three-dimensional particle-in-cell simulations and experimental data. The results show that introducing a second carrier mode can suppress multipactor by reshaping and shrinking the susceptibility region, with the extent and location of suppression strongly dependent on the device's aspect ratio and the relative phase of the second carrier mode. Distinct suppression patterns are observed across different fd regimes, while in some cases, susceptibility expansion also occurs under two-frequency operation. A key outcome is the identification and delineation of pure and mixed multipactor modes in coaxial geometry, where analytical mode boundaries are not readily available. Unlike planar geometries, pure-mode regions in coaxial systems overlap with mixed-mode domains, complicating mode identification. Additionally, image charge forces are found to have negligible influence on susceptibility thresholds but strongly affect electron growth rates. These findings offer valuable insights into the use of waveform engineering for controlling multipactor in high-power RF systems.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

Eight decades of research on the long-term health effects of radiation in atomic bomb survivors and their offspring

Abstract This year marks the 80th anniversary of the atomic bombings of Hiroshima and Nagasaki. Over the past eight decades, large-scale cohort studies of atomic bomb survivors and their offspring conducted by the Radiation Effects Research Foundation and its predecessor, the Atomic Bomb Casualty Commission, have provided critical insights into the long-term health effects of radiation exposure. Key findings include early identification of radiation-associated leukemia, as well as excess risks of all solid cancers combined, and most individual cancer sites. Observed radiation dose–response relationships have generally followed a linear-quadratic model for leukemia and a linear model for all solid cancers. Recent findings indicating possible upward curvature in the dose–response for all solid cancers may reflect underlying heterogeneity in factors related to individual cancer sites and should be explored further. Generally, younger age at exposure, lower attained age, and female sex appear to show greater radiation sensitivity for all solid cancers combined but results differ by individual cancer site. Recent studies have also identified potential radiation-related excesses for non-cancer diseases such as cataracts, various circulatory diseases, and others. Studies of heritable effects on the offspring of exposed atomic bomb survivors, in contrast, have shown no elevated risk to date in offspring from parental radiation exposure, either at the molecular or disease level. With the cooperation of the atomic bomb survivors and their families, Radiation Effects Research Foundation’s research will continue to play a crucial role in informing the health of survivors, their families, and global radiation protection in the decades to come.

Oncology↗
DOE OSTI2024

Combining compositional data sets introduces error in covariance network reconstruction

Microbial communities are diverse biological systems that include taxa from across multiple kingdoms of life. Notably, interactions between bacteria and fungi play a significant role in determining community structure. However, these statistical associations across kingdoms are more difficult to infer than intra-kingdom associations due to the nature of the data involved using standard network inference techniques. We quantify the challenges of cross-kingdom network inference from both theoretical and practical points of view using synthetic and real-world microbiome data. We detail the theoretical issue presented by combining compositional data sets drawn from the same environment, e.g. 16S and ITS sequencing of a single set of samples, and we survey common network inference techniques for their ability to handle this error. We then test these techniques for the accuracy and usefulness of their intra- and inter-kingdom associations by inferring networks from a set of simulated samples for which a ground-truth set of associations is known. We show that while the two methods mitigate the error of cross-kingdom inference, there is little difference between techniques for key practical applications including identification of strong correlations and identification of possible keystone taxa (i.e. hub nodes in the network). Furthermore, we identify a signature of the error caused by transkingdom network inference and demonstrate that it appears in networks constructed using real-world environmental microbiome data.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Connecting Material Properties and Redox Flow Cell Cycling Performance through Zero-Dimensional Models

Improvements in redox flow battery (RFB) performance and durability can be achieved through the development of new active materials, electrolytes, and membranes. While a rich design space exists for emerging materials, complex tradeoffs challenge the articulation of unambiguous target criteria, as the relationships between component selection and cycling performance are multifaceted. Here, we derive zero-dimensional, analytical expressions for mass balances and cell voltages under galvanostatic cycling, enabling direct connections between material/electrolyte properties, cell operating conditions, and resulting performance metrics (e.g., energy efficiency, capacity fade). To demonstrate the utility of this modeling framework, we highlight several considerations for RFB design, including upper bound estimation, active species decay, and membrane/separator conductivity-selectivity tradeoffs. Furthermore, we also discuss modalities for extending this framework to incorporate kinetic losses, distributed ohmic losses, and multiple spatial domains. Importantly, because the mass balances are solved analytically, hundreds of cycles can be simulated in seconds, potentially facilitating detailed parametric sweeps, system optimization, and parameter estimation from cycling experiments. More broadly, this approach provides a means for assessing the impact of cell components that simultaneously influence multiple performance-defining processes, aiding in the elucidation of key descriptors and the identification of favorable materials combinations for specific applications.

25 ENERGY STORAGE↗