Search NASA⌕ Search

SEARCH · Search NASA

Results for “knowledge recorder”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

GEO-SEQ Subtask 2.3.4: Microseismic Monitoring and Analysis

LBNL's recent analysis of the microseismic data being acquired at well KB-601 has produced a new result of significantly more microseismic activity than previously estimated. During 2009-2010, there was background activity of 1 or 2 events per day with a notable increase during the spring-summer months of up to 20 or more events in a signal day (Figure 1). This level of activity warrants increased effort to obtain quantitative information, and supports plans for expansion of the microseismic monitoring. Quantitative interpretation of these events, including locations, is still hampered by physically unrealistic data from some sensors and uncertainty in which sensors are being recorded and their depth. We now believe that some quantitative analysis will be possible, building upon LBNL's earlier work and analysis conducted by Pinnacle, and utilizing the sledge-hammer tests conducted in the fall of 2010 by the JIP. Current acquisition problems include electrical noise, lack of GPS clock timing, and the sensor uncertainty. To address the acquisition problems, we continue to recommend an active-source recording test with full 144 channel capability (or at least 48 channel). We also recommend a site visit for debugging and repair by a technician knowledgeable in the REF TEK recording system and microseismic acquisition.

54 ENVIRONMENTAL SCIENCES↗

On long-term periodicities in the sunspot record

Sunspot records are systematically maintained, with the knowledge that an 11 year average period exists since about 1850. Thus, the sunspot record of highest quality and considered to be the most reliable is that of cycle eight through the present. On the basis of cycles 8 through 20, various combinations of sine curves were used to approximate the observed R sub MAX values (where R sub MAX is the smoothed sunspot number at cycle maximum). It is found that a three component sinusoidal function, having an 11 cycle and a 2 cycle variation on a 90 cycle periodicity, yields computed R sub MAX values which fit, reasonably well, observed R sub MAX values for the modern sunspot cycles. Extrapolation of the empirical functions forward in time allows for the projection of values of R sub MAX for cycles 21 and 22. For cycle 21, the function projects a value of 157.3, very close to the actually observed value of 164.5. For cycle 22, the function projects a value of about 107. Linear regressions applied to cycle 22 indicate a long-period cycle (cycle duration 132 months). An extensive bibliography on techniques used to estimate the time dependent behavior of sunspot cycles is provided.

Wilson, R. M.↗

Guide to Handle Electronic and Physical Records Requests for Service Innovation-Records Management Services (SI-RMS) Staff

The Electronic Records Management System (ERMS) is Los Alamos National Laboratory’s method for consolidating, tracking, and preserving valuable records according to National Archives and Records Administration (NARA) requirements. Like an online library catalog, the ERMS stores unclassified electronic records that are retrievable from a remote computer system, and the ERMS contains a list of unclassified physical record holdings (paper documents, audiovisual materials, photographs, etc.) that are stored in the LANL Records Center and may be checked out. This guide covers new processes that affect both physical and electronic records. Each process begins when an employee (referred to as the requester) submits a request through the AskIT ticketing system (askit.lanl.gov). A request may include submitting a record, retrieving a record, or destroying a record.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

U.S. Spacesuit Knowledge Capture Series Catalog

The National Aeronautics and Space Administration (NASA) and other organizations have been performing U.S. Spacesuit Knowledge Capture (USSKC) since the beginning of space exploration through published reports, conference presentations, specialized seminars, and classes instructed by veterans in the field. The close physical interaction between spacesuit systems and human beings makes them among the most personally evocative pieces of space hardware. Consequently, spacesuit systems have required nearly constant engineering refinements to do their jobs without impinging on human activity. Since 2008, spacesuit knowledge capture has occurred through video recording, engaging both current and former specialists presenting technical scope specifically to educate individuals and preserve knowledge. These archives of spacesuit legacy reflect its rich history and will provide knowledge that will enhance the chances for the success of future and more ambitious spacesuit system programs. The scope and topics of USSKC have included lessons learned in spacesuit technology; experience from the Gemini, Apollo, Skylab, and Shuttle Programs; the process of hardware certification, design, development, and other program components; spacesuit evolution and experience; failure analysis and resolution; and aspects of program management. USSKC activities have progressed to a level where NASA, the National Air and Space Museum (NASM), Hamilton Sundstrand (HS) and the spacesuit community are now working together to provide a comprehensive way to organize and archive intra-agency information related to the development of spacesuit systems. These video recordings are currently being reviewed for public release using NASA export control processes. After a decision is made for either public or non-public release (internal NASA only), the videos and presentations will be available through the NASA Johnson Space Center Engineering Directorate (EA) Engineering Academy, the NASA Technical Reports Server (NTRS), the NASA Aeronautics & Space Database (NA&SD), or NASA YouTube. Event availability is duly noted in this catalog.

Bitterly, Rose↗

Engineering design knowledge recycling in near-real-time

It is hypothesized that the capture and reuse of machine readable design records is cost beneficial. This informal engineering notebook design knowledge can be used to model the artifact and the design process. Design rationale is, in part, preserved and available for examination. Redesign cycle time is significantly reduced (Baya et al, 1992). These factors contribute to making it less costly to capture and reuse knowledge than to recreate comparable knowledge (current practice). To test the hypothesis, we have focused on validation of the concept and tools in two 'real design' projects this past year: (1) a short (8 month) turnaround project for NASA life science bioreactor researchers was done by a team of three mechanical engineering graduate students at Stanford University (in a class, ME210abc 'Mechatronic Systems Design and Methodology' taught by one of the authors, Leifer); and (2) a long range (8 to 20 year) international consortium project for NASA's Space Science program (STEP: satellite test of the equivalence principle). Design knowledge capture was supported this year by assigning the use of a Team-Design PowerBook. Design records were cataloged in near-real time. These records were used to qualitatively model the artifact design as it evolved. Dedal, an 'intelligent librarian' developed at NASA-ARC, was used to navigate and retrieve captured knowledge for reuse.

Leifer, Larry↗

Distribution Integrity Management Plan (DIMP): Los Alamos National Laboratory Natural Gas Distribution System

This document is the distribution integrity management plan (Plan) for the Los Alamos National Laboratory (LANL) Natural Gas Distribution System. This Plan meets the requirements of 49 CFR Part 192, Subpart P Distribution Integrity Management Programs (DIMP) for the LANL Natural Gas Distribution System. This Plan was developed by reviewing records and interviewing LANL personnel. The records consist of the design, construction, operation and maintenance for the LANL Natural Gas Distribution System. The records system for the LANL Natural Gas Distribution System is limited, so the majority of information is based on the judgment of LANL employees; the maintenance crew, the Corrosion Specialist and the Utilities and Infrastructure (UI) Civil Team Leader. The records used in this report are: Pipeline and Hazardous Materials Safety Administration (PHMSA) 7100.1-1, Report of Main and Service Line Inspection, Natural Gas Leak Survey, Gas Leak Response Report, Gas Leak and Repair Report, and Pipe-to-Soil Recordings. The specific elements of knowledge of the infrastructure used to evaluate each threat and prioritize risks are listed in Sections 6 and 7, Threat Evaluation and Risk Prioritization respectively. This Plan addresses additional information needed and a method for gaining that data over time through normal activities. The processes used for the initial assessment of Threat Evaluation and Risk Prioritization are the methods found in the Simple, Handy Risk-based Integrity Management Plan (SHRIMP™) software package developed by the American Pipeline and Gas Agency (APGA) Security and Integrity Foundation (SIF). SHRIMP™ uses an index model developed by the consultants and advisors of the SIF. Threat assessment is performed using questions developed by the Gas Piping Technology Company (GPTC) as modified and added to by the SHRIMP™ advisors. This Plan is required to be reviewed every 5 years to be continually refined and improved. Records for all piping system installed after the effective date of this Plan will be captured and retained in the UI records documentation system. Primary Utility Asbuilts are maintained by Utilities Mapping (UMAP) and additional records are maintained on the N drive. Engineering Change Notices (ECNs) are stored on the N drive under configuration management and kept up by Utilities and Infrastructure Division Office (UI-DO). Records include, at a minimum, the location where new piping and appurtenances are installed and the material of which they are constructed.

03 NATURAL GAS↗

A Strategy for Increasing the Efficiency of the Oxygen Reduction Reaction in Mn-Doped Cobalt Ferrites

Alkaline fuel cells have drawn increasing attention as next-generation energy-conversion devices for electrical vehicles, since high pH enables the use of non-precious-metal catalysts. Herein, we report on a family of rationally designed Mn-doped cobalt ferrite (MCF) spinel nanocrystals, with an optimal composition Mn 0.8 (CoFe 2 ) 0.73 O 4 (MCF-0.8), that are effective electrocatalysts for the oxygen reduction reaction. MCF-0.8 exhibits a half-wave potential (E 1/2 ) of 0.89 V vs RHE in 1 M NaOH, only 0.02 V less than that of commercial Pt/C under identical testing conditions and, to the best of our knowledge, one of the highest recorded values in the literature. Moreover, MCF-0.8 exhibits remarkable durability (ΔE 1/2 = 0.014 V) after 10 000 electrochemical cycles. In situ X-ray absorption spectroscopy (XAS) reveals that the superior performance of the trimetallic MCF-0.8 originates from the synergistic catalytic effect of Mn and Co, while Fe helps preserve the spinel structure during cycling. We employed in situ XAS to track the evolution of the oxidation states and the metal–oxygen distances not only under constant applied potentials (steady state) but also during dynamic cyclic voltammetry (CV) (nonsteady state). The periodic conversion between Mn(III, IV)/Co(III) and Mn(II, III)/Co(II) as well as the essentially constant oxidation state of Fe during the CV suggests collaboration efforts among Mn, Co, and Fe. Mn and Co serve as the synergistic coactive sites to catalyze the oxygen reduction, apparently resulting in the observed high activity, while Fe works to maintain the integrity of the spinel structure, likely contributing to the remarkable durability of the catalyst. Furthermore, these findings provide a mechanistic understanding of the electrocatalytic processes of trimetallic oxides under real-time fuel cell operating conditions. This approach provides a new strategy to design high-performance non-precious-metal electrocatalysts for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Global Aspects of the Exploration of Space

The interest of man in outer space began long ago among uncivilized peoples to whom the face of the sky was clock and almanac; the celestial bodies, objects of worship. Exploration was at first by visual observation, later aided by armillary spheres and quadrants, and still later by more precise measuring instruments, telescopes, and spectroscopes. The information obtained was that borne by the light that was transmitted from the distant celestial object through the atmosphere to the observing instrument on the ground. In recent years the light waves have been supplemented by radio waves as carriers of information from the stars and planets. Men of many nations have contributed through the centuries to the exploration of space by the methods of astronomy. The history of advances in astronomical knowledge and technique includes the records of Chinese, Babylonians, Greeks, Arabians, and of nearly every nation of the modern world. International cooperation was early recognized as essential and beneficial; the countless number of the stars and the vastness of space present mankind with a truly global task. The picture of the universe obtained by the astronomers early stirred the imagination of men to speculate about the existence of life elsewhere in the universe, about means of communication with distant stars, and in the last centuries about the possibility of the travel of man to the moon and planets. Some sought to apply the science and engineering of their day to describe the vehicles to be used. For example, Jules Verne published in 1865 in "From the Earth to the Moon" a description of a gun-launched projectile carrying passengers to orbit the moon. Today we have taken the first steps to bring this inspired vision to reality. The exploration of space by unmanned vehicles carrying scientific apparatus began on October 4, 1957; exploration by man will follow in due course.

Dryden, Hugh L.↗

Single-Specimen Technique to Establish the J-Resistance of Linear Viscoelastic Solids with Constant Poisson's Ratio

A method is developed to establish the J-resistance function for an isotropic linear viscoelastic solid of constant Poisson's ratio using the single-specimen technique with constant-rate test data. The method is based on the fact that, for a test specimen of fixed crack size under constant rate, the initiation J-integral may be established from the crack size itself, the actual external load and load-point displacement at growth initiation, and the relaxation modulus of the viscoelastic solid, without knowledge of the complete test record. Since crack size alone, of the required data, would be unknown at each point of the load-vs-load-point displacement curve of a single-specimen test, an expression is derived to estimate it. With it, the physical J-integral at each point of the test record may be established. Because of its basis on single-specimen testing, not only does the method not require the use of multiple specimens with differing initial crack sizes, but avoids the need for tracking crack growth as well.

Gutierrez-Lemini, Danton↗

How HRP Research Results Contribute to Human Space Exploration Risk Mitigation

In addition to the scientific value of publications derived from research, results from Human Research Program (HRP) research also support HRP’s goals of mitigating crew health and performance risks in space flight. Research results are used to build the evidence base characterizing crew health and performance risks, to support risk research plan development, to inform crew health and performance standards, and to provide technologies to programs for meeting those standards and optimizing crew health and performance in space. This talk will describe examples of how research results support these efforts. For example, HRP research results are used to revise or even create new standards for human space flight, which have been established to protect crew health and performance during flight, and prevent negative long-term health consequences due to space flight. These standards are based on the best available clinical and scientific evidence, as well as operational experience from previous space flight missions, and are reviewed as new evidence emerges. Research results are also used to update the HRP evidence base, which is comprised of a set of reports that provide a current record of the state of knowledge from research and operations for each of the defined human health and performance risks for future NASA exploration missions. A discussion of the role of evidence within the HRP architecture will also be presented. The scope of HRP research results extends well beyond publications, as they are used in several capacities to support HRP deliverables and, ultimately, the advancement of human space exploration beyond low-Earth orbit.

Lumpkins, S. B.↗

How HRP Research Results Contribute to Human Space Exploration Risk Mitigation

In addition to the scientific value of publications derived from research, results from Human Research Program (HRP) research also support HRP's goals of mitigating crew health and performance risks in space flight. Research results are used to build the evidence base characterizing crew health and performance risks, to support risk research plan development, to inform crew health and performance standards, and to provide technologies to programs for meeting those standards and optimizing crew health and performance in space. This talk will describe examples of how research results support these efforts. For example, HRP research results are used to revise or even create new standards for human space flight, which have been established to protect crew health and performance during flight, and prevent negative long-term health consequences due to space flight. These standards are based on the best available clinical and scientific evidence, as well as operational experience from previous space flight missions, and are reviewed as new evidence emerges. Research results are also used to update the HRP evidence base, which is comprised of a set of reports that provide a current record of the state of knowledge from research and operations for each of the defined human health and performance risks for future NASA exploration missions. A discussion of the role of evidence within the HRP architecture will also be presented. The scope of HRP research results extends well beyond publications, as they are used in several capacities to support HRP deliverables and, ultimately, the advancement of human space exploration beyond low-Earth orbit.

Lumpkins, Sarah↗

Reflectance-Based Imaging Spectrometer Error Budget Field Practicum at the Railroad Valley Test Site, Nevada

Calibration and validation determine the quality and integrity of the data provided by sensors and have enormous downstream impacts on the accuracy and reliabilityof the products generated by these sensors. With the imminent launch of the next generation of space borne imaging spectroscopy sensors, the IEEE Geoscience and Remote Sensing Society's (GRSS's) Geoscience Spaceborne Imaging Spectroscopy Technical Committee (GSIS TC) initiated a calibration and validation initiative.This article reports on a recent reflectance-based imaging spectrometer error budget field practicum focused on radiometric calibration of spaceborne imaging spectroscopy sensors. The field exercise, conducted at Railroad Valley in Nevada, provided valuable training for personnel in a variety of Earth observation (EO) areas, from engineers developing future sensors to calibration scientists actively working in the field. Future work in this area will focus on analyzing the data acquired as part of the training to answer numerous scientific questions, e.g., understanding the spatial and spectral homogeneity of the site being measured, identifying the optimal sampling to characterize the site, and optimizating the sampling techniques, including looking into the automation of some measurement protocol aspects. The training exercise was recorded to ensure that the knowledge can be disseminated across the GRSS and wider imaging spectroscopy community.

Ong, Cindy↗

Lessons Learned from Sonic Boom Flight Research Projects conducted by NASA Armstrong Flight Research Center

Over the course of four years, a team of aerospace engineers at the National Aeronautics and Space Administration Armstrong Flight Research Center completed four projects, each with the objective to research sonic boom signatures from a ground and building level perspective. The relatively compressed timeline of these projects resulted in the team amassing a large number of lessons learned. With each successive project, these lessons have been more relied upon and referenced. This report serves as a written record of the teams tribal knowledge capturing the relevant lessons learned and their importance for future projects.

Erin R Waggoner↗

Offshore-onshore record of Last Glacial Maximum–to–present grounding line retreat at Pine Island Glacier, Antarctica

Pine Island Glacier, West Antarctica, is the largest Antarctic contributor to global sea-level rise and is vulnerable to rapid retreat, yet our knowledge of its deglacial history since the Last Glacial Maximum is based largely on marine sediments that record a retreat history ending in the early Holocene. Using a suite of 10 Be exposure ages from onshore glacial deposits directly adjacent to Pine Island Glacier, we show that this major glacier thinned rapidly in the early to mid-Holocene. Our results indicate that Pine Island Glacier was at least 690 m thicker than present prior to ca. 8 ka. We infer that the rapid thinning detected at the site farthest downstream records the arrival and stabilization of the retreating grounding line at that site by 8–6 ka. By combining our exposure ages and the marine record, we extend knowledge of Pine Island Glacier retreat both spatially and temporally: to 50 km from the modern grounding line and to the mid-Holocene, providing a data set that is important for future numerical ice-sheet model validation.

58 GEOSCIENCES↗

Landslide Susceptibility and Runout Assessment for the Arun Hydropower Cascade in Nepal Based on Multitemporal Landslide Inventory Developed Using Planet Imagery

The transboundary Pumqu/Arun River basin spreads across Nepal and Tibet. Nearly 95% of the basin lies in Tibet through which the Pumqu River flows forming the Arun River once it enters Nepal. The Arun River valley has about 3,163 MW in five large hydropower projects undergoing construction or planned for the future. Rainfall and earthquake-induced landslides, landslide dammed lakes and landslide-induced glacial lake outburst floods pose major risks to smooth operation of these projects. To safeguard upcoming hydropower projects, areas susceptible to landslides in the Arun River valley must be identified. We generated a multitemporal landslide inventory (2010-2020), modeled landslide susceptibility and runouts around the hydropower sites using Earth Observation (EO) techniques. We used high-resolution satellite imagery from Planet and open-source tool to establish a detailed and comprehensive multitemporal landslide inventory for the basin. The rigorous quality-controlled inventory represents yearly record of landslides from 2010 to 2020. To our knowledge this is one of the most comprehensive landslide inventories for the basin with yearly records of landslides.A data-driven approach was used to map areas susceptible to landslides within the Pumqu/Arun River basin. The multitemporal landslide inventory combined with other readily available EO-based variables were used to create a landslide susceptibility map. The highly susceptible areas delineated from the map was further used to characterize runouts near the hydropower sites. The susceptibility and runout analysis provide a valuable initial estimate of where landslides are likely to trigger and where the mobilized material is likely to end up.

Pukar Amatya↗

Clinical knowledge extraction via sparse embedding regression (KESER) with multi-center large scale electronic health record data

The increasing availability of electronic health record (EHR) systems has created enormous potential for translational research. However, it is difficult to know all the relevant codes related to a phenotype due to the large number of codes available. Traditional data mining approaches often require the use of patient-level data, which hinders the ability to share data across institutions. In this project, we demonstrate that multi-center large-scale code embeddings can be used to efficiently identify relevant features related to a disease of interest. We constructed large-scale code embeddings for a wide range of codified concepts from EHRs from two large medical centers. We developed knowledge extraction via sparse embedding regression (KESER) for feature selection and integrative network analysis. We evaluated the quality of the code embeddings and assessed the performance of KESER in feature selection for eight diseases. Besides, we developed an integrated clinical knowledge map combining embedding data from both institutions. The features selected by KESER were comprehensive compared to lists of codified data generated by domain experts. Features identified via KESER resulted in comparable performance to those built upon features selected manually or with patient-level data. The knowledge map created using an integrative analysis identified disease-disease and disease-drug pairs more accurately compared to those identified using single institution data. Analysis of code embeddings via KESER can effectively reveal clinical knowledge and infer relatedness among codified concepts. KESER bypasses the need for patient-level data in individual analyses providing a significant advance in enabling multi-center studies using EHR data.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Recorded Information Management Records Move Project

Throughout the history of Sandia National Laboratories, both federal and corporate records have been stored in 12 structures in remote areas of the lab, none of which are compliant storage facilities under federal regulations. Upon inspection by the National Archives and Records Administration (NARA), findings were levied against Sandia along with recommendations on correcting the issues. The RM Department anticipated over 38,000 boxes of legacy records in Sandia’s current holdings. The current storage areas present an abundance of unknown issues and risks associated with the move project. Along with the large amount of records, and media types, this project faces issues with over 50 years of ever changing filing systems and human error pertaining to data entry, boxes being processed and destroyed. This document presents the final data and results pertaining to the Recorded Information Management Department corrective actions in a well laid out project plan that accommodated safety, security, environmental concerns and of course the records.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Operational History of the Area 3 Radioactive Waste Management Site

Report presents information based on characterization and monitoring data, historical documentation and records, modeling studies, evaluations, and process knowledge for the Area 3 Radioactive Waste Management Site on the Nevada National Security Site.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗