Spectroscopic analysis of ultra-clean, 20-fs, short pulse laser heated solid targets using time-resolved, Cu K-shell emission for electron fast ignition
Explore the source record for details and available documents.
Physics - Plasma physics↗
SEARCH · Search NASA
Results for “laser heating”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Laser-heated Pedestal Growth and Raman DTS for Harsh-environment Applications
For presentation at the UPISC Collaboration Workshop, Pittsburgh, PA, November 7-8, 2023.
Lander, Gary↗
Magnetized directly-driven ICF capsules: increased instability growth from non-uniform laser drive
Simulations anticipate increased perturbation growth from non-uniform laser heating for magnetized direct-drive implosions. At the capsule pole, where the magnetic field is normal to the ablator surface, the field remains in the conduction zone and suppresses non-radial thermal conduction; in unmagnetized implosions this non-radial heat-flow is crucial in mitigating laser heating imbalances. Single-mode simulations show the magnetic field particularly amplifying short wavelength perturbations, whose behavior is dominated by thermal conduction. The most unstable wavelength can also become shorter. 3D multi-mode simulations of the capsule pole reinforce these findings, with increased perturbation growth anticipated across a wide range of scales. Finally, the results indicate that high-gain spherical direct-drive implosions require greater constraints on the laser heating uniformity when magnetized.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Photocurrent in carbon nanotube bundle: Graded Seebeck coefficient phenomenon
Here, polarized photovoltage of a suspended aligned carbon nanotube (CNT) bundle under uniform optical irradiation is discovered without additional structural modification or bias voltage. Such a phenomenon is very surprising considering the metallic behavior of the overall bundle and zero temperature difference between ends. The photovoltage characteristic time is found similar to the thermal response time under step Joule heating and implies a relation to the thermal behavior of the CNT bundle. A similar thermoelectric voltage is also observed during step Joule heating. Localized laser heating and scanning along the axial direction of the bundle uncovers a linear spatial variation of the local Seebeck coefficient. The Seebeck coefficient linearly decreases from root to tip of the CNT bundle with a rate of a few - µV∙K –1 ·mm –1 . Deep investigation in both the microscopic and macroscopic structures of the CNT bundle reveals that the local alignment of CNT assemblies rather than the minor defects in individual CNTs brings about this linear distribution of Seebeck coefficient in space. The finding presents a new way for direct photon-to-electric energy conversion via Seebeck coefficient grading in CNT structures.
42 ENGINEERING↗
Foams in Hohlraums
Foam materials are starting to find application in laser-heated hohlraums used to drive inertial confinement fusion (ICF) implosions. The disparate scales of the solid foam elements (nm) compared to the typical problem scale (mm) make it expensive to resolve the individual foam elements in hydrodynamic calculations. In this project we developed two new models for treating foam materials – a 3D hydrodynamic model that treats the foam as bits of pre-expanded solid material separated by voids, and a subgrid model that captures the essential physics of laser-heated foams without requiring resolution of the individual solid elements. We also explored the microphysics of the transition from interpenetrating kinetic behavior to fully-collisional fluid-like behavior during the early time heating and expansion of foam elements through a combination of single-fluid and multi-fluid hydrodynamics calculations and particle-in-cell calculations. The model was benchmarked against these calculations and against experimental data on laser-heated chemical and additive-manufactured (AM) foams. Since there was no existing data on laser-heated AM foams, we performed the first experiments on such foams at the Jupiter Laser Facility. Samples of three different types of printed AM foams were heated using a single 0.5 micron laser. The foam densities ranged from 10 to 100 mg/cc (supercritical for 0.5 micron light). We measured the backscattered light (power and spectrum), the transmitted light, and the time-integrated temperature of the foam samples. This benchmarked subgrid foam model is a new capability that should allow routine calculation of ICF designs using foam elements, potentially opening up a new design space.
36 MATERIALS SCIENCE↗
Analysis of laser-induced modification of collagen structure using nonlinear optical microscopy
Nonlinear optical microscopy is used to monitor changes in the collagen structure of patellar ligament after IR laser heating up to a temperature of 60 °C. Pre-denaturation modification of the tissue matrix exhibits specific properties and consists in splitting of initially parallel fibre bundles into array of divergent fibres. Image processing employing Fast Fourier transform analysis is used for characterising images of the fibre structure and determining the collagen orientation index. An increase in manifestation of laser-induced disordering with an increase in IR laser radiation power from 0.3 to 2 W is accompanied by a decrease in the collagen orientation index. The specific disorganisation of the collagen tissue structure during laser heating is supposed to be due to fast speed and local action of the laser heating, which leads to mechanical distortions of the structural elements of tissue matrix. (paper)
36 MATERIALS SCIENCE↗
Melting diamond in the diamond cell by laser-flash heating
The phase behavior of carbon at high pressure and the search for carbon structures denser than diamond has been explored for decades showing large discrepancies, with many fundamental questions remaining unresolved. Here we show evidence of melting above the graphite-diamond-liquid (GDL) triple point (~13 GPa, 4000 K) up to 50 GPa on samples recovered from single flash-heating events using spectroscopic and electron microscopic methods. The results show that for all pressures, diamond melts below the triple point temperature contradicting previous studies, most of which predict a positive slope of the melting curve.
36 MATERIALS SCIENCE↗
Multi-extreme conditions at the Second Target Station
Three concepts for the application of multi-extreme conditions under in situ neutron scattering are described here. The first concept is a neutron diamond anvil cell made from a non-magnetic alloy. It is shrunk in size to fit existing magnets and future magnet designs and is designed for best pressure stability upon cooling. This will allow for maximum pressures above 10 GPa to be applied simultaneously with (steady-state) high magnetic field and (ultra-)low temperature. Additionally, an implementation of miniature coils for neutron diamond cells is presented for pulsed-field applications. The second concept presents a set-up for laser-heating a neutron diamond cell using a defocused CO 2 laser. Cell, anvil, and gasket stability will be achieved through stroboscopic measurements and maximum temperatures of 1500 K are anticipated at pressures to the megabar. The third concept presents a hybrid levitator to enable measurements of solids and liquids at temperatures in excess of 4000 K. This will be accomplished by a combination of bulk induction and surface laser heating and hyperbaric conditions to reduce evaporation rates. The potential for deployment of these multi-extreme environments within this first instrument suite of the Second Target Station is described with a special focus on VERDI, PIONEER, CENTAUR, and CHESS. Furthermore, considerations for deployment on future instruments, such as the one proposed as TITAN, are discussed. Overall, the development of these multi-extremes at the Second Target Station, but also beyond, will be highly advantageous for future experimentation and will give access to parameter space previously not possible for neutron scattering.
47 OTHER INSTRUMENTATION↗
The influence of laser power modulation on melt pool dynamics in laser powder bed fusion
While the majority of laser powder bed fusion (LPBF) metal additive manufacturing uses a continuous wave (CW) laser heat source, some commercial applications of LPBF additive manufacturing instead involve the modulation of the laser power on tens-of-microsecond timescales as an adjustable process variable. This article reports the use of in situ, high speed x-ray and optical imaging to probe melt pool fluid flow, defect formation, and nearby powder motion during LPBF with both modulated and CW laser heat sources. We observe melt pool dynamics unique to modulated laser melting even at very high duty cycles that are related to fluctuations in vapor depression depth, complex pore formation mechanisms, and changes to denudation physics when compared to CW melting. These behaviors are present in Ti–6Al–4V, 316L stainless steel, and AL1100 alloys but vary slightly as a function of material, indicating a substantial dependence on the viscosity and surface tension of the liquid metal. While high duty cycles produce weld tracks of comparable quality to CW melting, lower duty cycles introduce substantial defect concentrations. At intermediate duty cycles, careful control of modulation parameters can repeatably and precisely yield one pore per laser pulse, suggesting a method for intentionally inserting engineered porosity at specific sites during an LPBF build.
3D printing↗
Extended-magnetohydrodynamics in under-dense plasmas
Extended-magnetohydrodynamics (MHD) transports magnetic flux and electron energy in high-energy-density experiments, but individual transport effects remain unobserved experimentally. Two factors are responsible in defining the transport: electron temperature and electron current. Here, each electron energy transport term has a direct analog in magnetic flux transport. To measure the thermally driven transport of magnetic flux and electron energy, a simple experimental configuration is explored computationally using a laser-heated pre-magnetized under-dense plasma. Changes to the laser heating profile precipitate clear diagnostic signatures from the Nernst, cross-gradient-Nernst, anisotropic conduction, and Righi-Leduc heat-flow. With a wide operating parameter range, this configuration can be used in both small and large scale facilities to benchmark MHD and kinetic transport in collisional/semi-collisional, local/non-local, and magnetized/unmagnetized regimes.
70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
Decoupling Carrier Dynamics and Energy Transport in Ultrafast Near-Field Nanoscopy
Ultrafast near-field optical nanoscopy has emerged as a powerful platform to characterize low-dimensional materials. While analytical and numerical models have been established to account for photoexcited carrier dynamics, quantitative evaluation of the associated pulsed laser heating remains elusive. Here, we decouple the photocarrier density and temperature increase in near-field nanoscopy by integrating the two-temperature model (TTM) with finite-difference time-domain (FDTD) simulations. These results reveal that the electron–phonon coupling in a silicon film after femtosecond laser excitation is most pronounced within approximately 3 ps–substantially shorter than the photocarrier decay time scale at tens of picoseconds. Moreover, the coupled TTM-FDTD method indicates that ultrafast laser heating can cause up to a 14% variation in the near-field signal at a 220 μJ/cm 2 pump pulse fluence. Our numerical results are further validated by transient experiments, highlighting the potential of this method for investigations of carrier and thermal phenomena in emerging nanomaterials and nanodevices.
77 NANOSCIENCE AND NANOTECHNOLOGY↗
Journal paper
Laser technology is being widely studied for controlled energy deposition for a range of applications, including flow control, ignition, combustion, and diagnostics. The absorption and scattering of laser radiation by liquid droplets in aerosols affects propagation of the laser beam in the atmosphere, while the ignition and combustion characteristics in combustion chambers are influenced by the evaporation rate of the sprayed fuel. In this work, we present a mathematical model built on OpenFOAM for laser heating and evaporation of a single droplet in the diffusion-dominated regime taking into account absorption of the laser radiation, evaporation process, and vapor flow dynamics. The developed solver is validated against available experimental and numerical data for heating and evaporation of ethanol and water droplets. The two main regimes—continuous and pulsed laser heating—are explored. For continuous laser heating, the peak temperature is higher for larger droplets. For pulsed laser heating, when the peak irradiance is close to transition to the boiling regime, the temporal dynamics of the droplet temperature does not depend on the droplet size. With the empirical normalization of time, the dynamics of the droplet shrinkage and cooling are found to be independent of droplet sizes and peak laser intensities.
42 ENGINEERING↗
Particle-in-cell Monte Carlo-collision modeling of non-ideal effects in wave-heated dense microplasmas
A computational model for non-ideal plasma effects during the time evolution of a second-stage laser-heated discharge at high pressures is presented. The model extends a classical one-dimensional particle-in-cell Monte Carlo-collision (PIC-MCC) approach coupled with Maxwell's equations for the laser-heating process of a xenon plasma at 300 K temperature and 10–100 bar pressure. Plasma non-ideality resulting from Coulomb coupling at high plasma densities is manifested as a depression in the effective ionization potential of atoms and enhanced collision cross sections. These non-ideal effects are represented using the Ecker–Kröll model in the context of the PIC-MCC approach. We find that full ionization of the plasma is obtained on the picosecond timescale, starting from the skin layer and quickly expanding throughout the domain through an anomalous extension of the skin depth. More critically, we show that the inclusion of the non-ideal plasma effects results in more rapid ionization compared to an ideal plasma, especially at higher pressures. The ionization delay reduction is of the order of a fraction of a picosecond, corresponding to a 16% decrease at 100 bar. As the amplitude of the wave field is lowered, the ionization rate is lowered, making the plasma non-ideality effects more prominent.
Solmaz, Evrim (ORCID:0000000211830881)↗
Materials synthesis at terapascal static pressures
Theoretical modelling predicts very unusual structures and properties of materials at extreme pressure and temperature conditions. Hitherto, their synthesis and investigation above 200 gigapascals have been hindered both by the technical complexity of ultrahigh-pressure experiments and by the absence of relevant in situ methods of materials analysis. Here we report on a methodology developed to enable experiments at static compression in the terapascal regime with laser heating. We apply this method to realize pressures of about 600 and 900 gigapascals in a laser-heated double-stage diamond anvil cell, producing a rhenium–nitrogen alloy and achieving the synthesis of rhenium nitride Re 7 N 3 —which, as our theoretical analysis shows, is only stable under extreme compression. Full chemical and structural characterization of the materials, realized using synchrotron single-crystal X-ray diffraction on microcrystals in situ, demonstrates the capabilities of the methodology to extend high-pressure crystallography to the terapascal regime.
36 MATERIALS SCIENCE↗
Hydrogen solubility in FeSi alloy phases at high pressures and temperatures
Abstract Light elements alloying with metallic Fe can change the properties and therefore play a key role in the structure and dynamics of planetary cores. Hydrogen and silicon are possible light elements in the rocky planets’ cores. However, hydrogen storage in Fe-Si alloy systems remains unclear at high pressures and high temperatures because of experimental difficulties. Taking advantage of pulsed laser heating combined with high-energy synchrotron X-ray diffraction, we studied reactions between FeSi and H in laser-heated diamond-anvil cells (LHDACs) up to 61.9 GPa and 3500 K. We found that under H-saturated conditions the amount of H alloying with FeSi (0.3 and <0.1 wt% for the B20 and B2 structures, respectively) is much smaller than that in pure Fe metal (>1.8 wt%). Our experiments also suggest that H remains in the crystal structure of FeSi alloy when recovered to 1 bar. Further density functional theory (DFT) calculations indicate that the low-H solubility likely results from the highly distorted interstitial sites in the B20 and B2 structures, which are not favorable for H incorporation. The recovery of H in the B20 FeSi crystal structure at ambient conditions could open up possibilities to understand geochemical behaviors of H during core formation in future experiments. The low-H content in FeSi alloys suggests that if a planetary core is Si-rich, Si can limit the ingassing of H into the Fe-rich core.
Geochemistry & Geophysics↗
Intense cyclic heating effects on thermo-fracture and thermal shock of solid tungsten and open-cell tungsten foam
Here we investigate here the effects of transient (cyclic) arc-jet plasma and laser heating on fracture behavior of W-foam and solid tungsten. The two key parameters that control the foam thermomechanical response are its density and mean cell size expressed in Pores Per Inch (PPI). Tungsten foam samples were fabricated with Chemical Vapor Deposition (CVD) with variety of PPI and relative density. These were tested under two types of qualitatively different conditions: (1) high-enthalpy arc-jet, and (2) high-power cyclic laser heating. None of the foam samples showed macroscopic through-thickness cracks. However, distributed micro-cracks were observed on ligaments and their triple junctions. Under the same loading conditions, W-foam and solid tungsten showed similar crack network pattern and characteristic length-scale. However, Crack Opening Displacement (COD) was twice as large in solid W as compared to W-foam. Foam samples that have been previously exposed to a low-pressure helium plasma showed significant changes in their surface forming nano-texture fuzz which was removed by subsequent testing in the arc-jet. Extensive fracture and re-crystallization were observed in the thin solid W disk that was fully-constrained from expansion. Thicker and fully-constrained solid W disks did not display recrystallization, grain growth, and extensive cracking. However, thicker disks that were free to expand showed some recrystallization and extensive through-thickness cracks due to less effective cooling and thus higher temperatures. Laser beam testing showed no visible damage formation at 0.19 GW/m 2 and 0.38 GW/m 2 for both low-density (23%) and high-density (43%) foams at low pulses (100-1000). Micro-cracks were observed after 10,000 pulses at 0.19 GW/m 2 in both foams, and in low-density foam after 100,000 at 0.38 GW/m 2 . The nature of thermomechanical damage in W-foam exposed to extreme power (GW/m 2 ) short-duration laser pulses was found to be qualitatively similar to that of high power (MW/m 2 ) long-duration arc-jet.
36 MATERIALS SCIENCE↗
Radiofrequency-triggered surface-heated laser-induced graphene membranes for enhanced membrane distillation
A hydrophobic electroconductive LIG membrane with ∼143.7° water contact angle is prepared showing average surface temperature of ∼140 °C with 91 MHz radiofrequency heating. Vacuum membrane distillation shows ∼13.5 L m −2 h −1 flux.
Mahbub, Hasib [Department of Chemical Engineering,↗
A Bezier Curve Informed Melt Pool Geometry to Model Additive Manufacturing Microstructures Using SPPARKS
Additive manufacturing is a transformative technology with the potential to manufacture designs which traditional subtractive machining methods cannot. Additive manufacturing offers fast builds at near final desired geometry; however, material properties and variability from part to part remain a challenge for certification and qualification of metallic components. AM induced metallic microstructures are spatially heterogeneous and highly process dependent. Engineering properties such as strength and toughness are significantly affected by microstructure morphologies resulting from the manufacturing process Linking process parameters to microstructures and ultimately to the dynamic response of AM materials is critical to certifying and qualifying AM built parts and components and improving the performance of AM materials. The AM fabrication process is characterized by building parts layer by layer using a selective laser melt process guided by a computer. A laser selectively scans and melts metal according to a designated geometry. As the laser scans, metal melts, fuses, and solidifies forming the final geometry in a layerwise fashion. As the laser heat source moves away, the metal cools and solidifies forming metallic microstructures. This work describes a microstructure modeling application implemented in the SPPARKS kinetic Monte Carlo computational framework for simulating the resulting microstructures. The application uses Bzier curves and surfaces to model the melt pool surface and spatial temperature profile induced by moving the laser heat source; it simulates the melting and fusing of metal at the laser hot spot and microstructure formation and evolution when the laser moves away. The geometry of the melt pool is quite flexible and we explore effects of variances in model parameters on simulated microstructures.
36 MATERIALS SCIENCE↗