Search NASA⌕ Search

SEARCH · Search NASA

Results for “layered rocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

Long-wavelength Radar Studies of the Lunar Maria

Radar measurements at 70 cm and 7.5 m wavelengths provide insight into the structure and chemical properties of the upper 5-100 m of the lunar regolith and crust. Past work has identified a number of anomalous regions and changes in echo strength, some attributed to differences in titanium content. There has been little opportunity, however, to compare calibrated long-wavelength backscatter among different units or to theoretical model results. We combine recent high-resolution (3-5 km) 70-cm radar data for the nearside with earlier calibrated full-disk observations to provide a reasonable estimate of the true lunar backscatter coefficient. These data are tested against models for quasi-specular scattering from the surface, echoes from a buried substrate, and Mie scattering from surface and buried rocks. We find that 70 cm echoes likely arise from Mie scattering by distributed rocks within the soil, consistent with earlier hypotheses. Returns from a buried substrate would provide a plausible fit to the observations only if the regolith depth were ~3 m or less and varied little across the maria. Depolarized echoes are due to some combination of single and multiple scattering events, but it appears that single scattering alone could account for the observed echo power, based on comparisons with terrestrial rocky surfaces. Backscatter strength from the regolith is most strongly affected by the loss tangent, whose variation with mineral content is still poorly defined. We compared the backscatter values for the mare deposits to the oxide contents inferred from spectral ratio methods, and found that in general the unit boundaries evident in radar images closely follow those seen in color difference images. The 70-cm data are not well correlated with TiO2 values found using the Charette relationship nor with Fe abundances derived from Clementine observations. The lack of a relationship between radar echo and Fe content is reasonable given the distribution of iron among various mineral phases, but ilmenite content (FeTiO3) has typically been cited as the dominant cause of changes in loss tangent (and thus the radar absorption). The lack of correlation between the radar data and TiO2 estimates may arise from uncertainties in the Charette technique, subtle differences in the upper surface and bulk properties of the regolith, mineralogic effects on the radar not linked to titanium content, or to some combination of these factors. Dark crater haloes in the mare and highlands, and low radar returns from apparent cryptomare regions, are used to illustrate the role radar data can play in identifying changes in regolith composition; low-return haloes around craters such as Petavius may indicate 5-25% contamination of the highlands soil by excavated mare material or a layer of rock-poor ejecta at least several meters deep. The 7.5-m data were shown to correlate to a reasonable degree with estimates of Fe abundance, suggesting that this component of the mare basalts is primarily responsible for attenuation losses at very long wavelengths. The different sensitivities of the two radar wavelengths and multispectral data offers the potential for future deep mapping of the mare lava flows and regolith.

Lunar MariaRadarLunar Studies↗
NASA NTRS1995

Long-wavelength Radar Studies of the Lunar Maria

Radar measurements at 70 cm and 7.5 m wavelengths provide insight into the structure and chemical properties of the upper 5-100 m of the lunar regolith and crust. Past work has identified a number of anomalous regions and changes in echo strength, some attributed to differences in titanium content. There has been little opportunity, however, to compare calibrated long-wavelength backscatter among different units or to theoretical model results. We combine recent high-resolution (3-5 km) 70-cm radar data for the nearside with earlier calibrated full-disk observations to provide a reasonable estimate of the true lunar backscatter coefficient. These data are tested against models for quasi-specular scattering from the surface, echoes from a buried substrate, and Mie scattering from surface and buried rocks. We find that 70 cm echoes likely arise from Mie scattering by distributed rocks within the soil, consistent with earlier hypotheses. Returns from a buried substrate would provide a plausible fit to the observations only if the regolith depth were approx.3 m or less and varied little across the maria. Depolarized echoes are due to some combination of single and multiple scattering events, but it appears that single scattering alone could account for the observed echo power, based on comparisons with terrestrial rocky surfaces. Backscatter strength from the regolith is most strongly affected by the loss tangent, whose variation with mineral content is still poorly defined. We compared the backscatter values for the mare deposits to the oxide contents inferred from spectral ratio methods, and found that in general the unit boundaries evident in radar images closely follow those seen in color difference images. The 70-cm data are not well correlated with TiO2 values found using the Charette relationship nor with Fe abundances derived from Clementine observations. The lack of a relationship between radar echo and Fe content is reasonable given the distribution of iron among various mineral phases, but ilmenite content (FeTiO3) has typically been cited as the dominant cause of changes in loss tangent (and thus the radar absorption). The lack of correlation between the radar data and TiO2 estimates may arise from uncertainties in the Charette technique, subtle differences in the upper surface and bulk properties of the regolith, mineralogic effects on the radar not linked to titanium content, or to some combination of these factors. Dark crater haloes in the mare and highlands, and low radar returns from apparent cryptomare regions, are used to illustrate the role radar data can play in identifying changes in regolith composition; low-return haloes around craters such as Petavius may indicate 5-25% contamination of the highlands soil by excavated mare material or a layer of rock-poor ejecta at least several meters deep. The 7.5-m data were shown to correlate to a reasonable degree with estimates of Fe abundance, suggesting that this component of the mare basalts is primarily responsible for attenuation losses at very long wavelengths. The different sensitivities of the two radar wavelengths and multispectral data offers the potential for future deep mapping of the mare lava flows and regolith.

Lunar Studies↗
NASA NTRS1973

Distinguishing major lithologic types in rocks of precambrian age in central Wyoming using multilevel sensing, with a chapter on possible economic significance of iron formation discovered by use of aircraft images in the Granite Mountains of Wyoming

The author has identified the following significant results. Information obtained by remote sensing from three altitude levels: ERTS-1 (565 miles), U-2 (60,000 feet), and C-130 aircraft (15,000 feet) illustrates the possible application of multilevel sensing in mineral exploration. Distinction can be made between rocks of greenstone belts and rocks of granite-granite gneiss areas by using ERTS-1 imagery in portions of the Precambrian of central Wyoming. Study of low altitude color and color infrared photographs of the mafic terrain revealed the presence of metasedimentary rocks with distinct layers that were interpreted as amphibolite by photogeologic techniques. Some of the amphibolite layers were found to be iron formation when examined in the field. To our knowledge this occurrence of iron formation has not been previously reported in the literature.

Houston, R. S.↗
NASA NTRS1987

A chemical and petrological model of the lunar crust

Information is given on the composition and structure of the lunar crust. A lunar model is illustrated, indicating that it has essentially two layers, anorthositic mixed rocks overlaying a generally noritic crystalline basement. Implications relative to lunar evolution are discussed.

Spudis, Paul D.↗
NASA NTRS1991

Clays on Mars: Review of chemical and mineralogical evidence

Mafic igneous bedrock is inferred for Mars, based on spectrophotometric evidence for pyroxene (principally in optically dark areas of the globe) and the pyroxenite-peridotite petrology of shergottite nakhlite chassignite (SNC) meteorites. Visible and infrared spectra of reddish-brown surface fines (which dominate Martian bright areas) indicate ferric iron and compare favorably (though not uniquely) with spectra of palagonitic soils. Laboratory studies of SNC's and Viking Lander results support a model for Martian soil based on chemical weathering of mafic rocks to produce layer structured silicates (clay minerals), salts, and iron oxides.

Banin, Amos↗
NASA NTRS2005

Modern Radar Techniques for Geophysical Applications: Two Examples

The last decade of the evolution of radar was heavily influenced by the rapid increase in the information processing capabilities. Advances in solid state radio HF devices, digital technology, computing architectures and software offered the designers to develop very efficient radars. In designing modern radars the emphasis goes towards the simplification of the system hardware, reduction of overall power, which is compensated by coding and real time signal processing techniques. Radars are commonly employed in geophysical radio soundings like probing the ionosphere; stratosphere-mesosphere measurement, weather forecast, GPR and radio-glaciology etc. In the laboratorio di Geofisica Ambientale of the Istituto Nazionale di Geofisica e Vulcanologia (INGV), Rome, Italy, we developed two pulse compression radars. The first is a HF radar called AIS-INGV; Advanced Ionospheric Sounder designed both for the purpose of research and for routine service of the HF radio wave propagation forecast. The second is a VHF radar called GLACIORADAR, which will be substituting the high power envelope radar used by the Italian Glaciological group. This will be employed in studying the sub glacial structures of Antarctica, giving information about layering, the bed rock and sub glacial lakes if present. These are low power radars, which heavily rely on advanced hardware and powerful real time signal processing. Additional information is included in the original extended abstract.

Arokiasamy, B. J.↗
NASA NTRS2010

The Proposed Mars Astrobiology Explorer - Cacher [MAX-C] Rover: First Step in a Potential Sample Return Campaign

Sample return from Mars has been advocated by numerous scientific advisory panels for over 30 years, most prominently beginning with the National Research Council s [1] strategy for the exploration of the inner solar system, and most recently by the Mars Exploration Program Analysis Group (MEPAG s) Next Decade Science Analysis Group [2]. Analysis of samples here on Earth would have enormous advantages over in situ analyses in producing the data quality needed to address many of the complex scientific questions the community has posed about Mars. Instead of a small, predetermined set of analytical techniques, state of the art preparative and instrumental resources of the entire scientific community could be applied to the samples. The analytical emphasis could shift as the meaning of each result becomes better appreciated. These arguments apply both to igneous rocks and to layered sedimentary materials, either of which could contain water and other volatile constituents. In 2009 MEPAG formed the Mid-Range Rover Science Analysis Group (MRR-SAG) to formulate a mission concept that would address two general objectives: (1) conduct high-priority in situ science and (2) make concrete steps towards the potential return of samples to Earth. This analysis resulted in a mission concept named the Mars Astrobiology Explorer-Cacher (MAX-C), which was envisioned for launch in the 2018 opportunity. After extensive discussion, this group concluded that by far the most definitive contribution to sample return by this mission would be to collect and cache, in an accessible location, a suite of compelling samples that could potentially be recovered and returned by a subsequent mission. This would have the effect of separating two of the essential functions of MSR, the acquisition of the sample collection and its delivery to martian orbit, into two missions.

Allen, Carlton C.↗
NASA NTRS2016

Icebreaker-3 Drill Integration and Testing at Two Mars-Analog Sites

A decade of evolutionary development of integrated automated drilling and sample handling at analog sites and in test chambers has made it possible to go 1 meter through hard rocks and ice layers on Mars. The latest Icebreaker-3 drill has been field tested in 2014 at the Haughton Crater Marsanalog site in the Arctic and in 2015 with a Mars lander mockup in Rio Tinto, Spain, (with sample transfer arm and with a prototype life-detection instrument). Tests in Rio Tinto in 2015 successfully demonstrated that the drill sample (cuttings) was handed-off from the drill to the sample transfer arm and thence to the on-deck instrument inlet where it was taken in and analyzed ("dirt-to-data").

astrobiology↗
NASA NTRS1985

Three-layer Generic Ganymedes: Structure and Evolution

Accurate, three layered structural models were generated for Ganymede and Callisto. Three layered satellites consist of a rock core, a region of mixed rock and ice, and an outer shell of pure ice. This structure would result from either accretional melting of the outermost region of the satellite or differentiation subsequent to localized melting. A completely undifferentiated ice rock satellite possesses only the single, top boundary layer and, in this case, melting is also relatively difficult to initiate; this suggests that, if accretional melting results in a small degree of differentiation initially, subsequent melting may readily occur as the satellite warms due to radiogenic heating. Alternatively, if accretion is not accompanied by a small degree of differentiation, it may prove too difficult to initiate nonaccretional melting and the satellite might remain undifferentiated indefinitely.

Mueller, S. W.↗
NASA NTRSDate not supplied

A Komatiite Succession as an Analog for the Olivine Bearing Rocks at Jezero

The Mars 2020 rover landed at Jezero crater on February 18, 2021 [1]. Since then, the rover has traveled around the “Séítah” region [2] and has collected data from the Mastcam-Z, Supercam, PIXL and SHERLOC instruments that has led to insights into the formation of the olivine-clay-carbonate bearing rocks that were identified from orbit [3,4]. Here we discuss three questions: 1) What have we learned about the olivine-claycarbonate unit? 2) What terrestrial analogs exist for the unit? 3) Why do the rocks have a thinly layered morphology? We shall briefly mention instrumental measurements which provide important information regarding the olivine bearing rock at Seitah. Note: Extended abstract included on attachment.

A.J. Brown↗
NASA NTRS1983

Workshop on Pristine Highlands Rocks and the early History of the Moon

Oxide composition of the Moon, evidence for an initially totally molten Moon, geophysical contraints on lunar composition, random sampling of a layered intrusion, lunar highland rocks, early evolution of the Moon, mineralogy and petrology of the pristine rocks, relationship of the pristine nonmore rocks to the highlands soils and breccias, ferroan anorthositic norite, early lunar igneous history, compositional variation in ferroan anosthosites, a lunar magma ocean, deposits of lunar pristine rocks, lunar and planetary compositions and early fractionation in the solar nebula, Moon composition models, petrogenesis in a Moon with a chondritic refractory lithophile pattern, a terrestrial analog of lunar ilmenite bearing camulates, and the lunar magma ocean are summarized.

Longhi, J.↗
NASA NTRS2009

The Lunar Regolith

A thick layer of regolith, fragmental and unconsolidated rock material, covers the entire lunar surface. This layer is the result of the continuous impact of meteoroids large and small and the steady bombardment of charged particles from the sun and stars. The regolith is generally about 4-5 m thick in mare regions and 10-15 m in highland areas (McKay et al., 1991) and contains all sizes of material from large boulders to sub-micron dust particles. Below the regolith is a region of large blocks of material, large-scale ejecta and brecciated bedrock, often referred to as the "megaregolith". Lunar soil is a term often used interchangeably with regolith, however, soil is defined as the subcentimeter fraction of the regolith (in practice though, soil generally refers to the submillimeter fraction of the regolith). Lunar dust has been defined in many ways by different researchers, but generally refers to only the very finest fractions of the soil, less than approx.10 or 20 microns. Lunar soil can be a misleading term, as lunar "soil" bears little in common with terrestrial soils. Lunar soil contains no organic matter and is not formed through biologic or chemical means as terrestrial soils are, but strictly through mechanical comminution from meteoroids and interaction with the solar wind and other energetic particles. Lunar soils are also not exposed to the wind and water that shapes the Earth. As a consequence, in contrast to terrestrial soils, lunar soils are not sorted in any way, by size, shape, or chemistry. Finally, without wind and water to wear down the edges, lunar soil grains tend to be sharp with fresh fractured surfaces.

Noble, Sarah↗
NASA NTRS1988

The structure of the Martian cryolithosphere upper levels

Structural inhomogeneities of the Martian cryolithosphere upper levels were studied by the proposed crater method. On the basis of analysis of 127 photomaps of 1:2 million scale morphological and morphometrical parameters of all the fresh craters larger than 1 km in diameter with fluidized ejecta and without it were investigated. Using the parameters of the craters, the roof depths of ice-bearing rocks were estimated and the data on the ice relative constant in the excavated permafrost layer were obtained. These data were used for the construction of maps of the boundary depth between ice-free nearsurface layer and ice-bearing rocks. A series of maps of the relative ice content for individual permafrost horizons was constructed. It was deduced from the obtained maps that the zone of the dryest nearsurface rocks on Mars is in the latitude belt + or - 30 degrees where maximum floor depths of the ice-bearing rocks vary from 400 to more than 400 m. It was found that the thickness of ice-free rocks in the Southern Hemisphere is larger than in the Northern one. The tendency of similarity of latitudinal zonality observed both on the maps of the minimal and mean roof depths may be considered as an indicator of structural stability of upper horizons of the Martian cryolithosphere down to the depths of 300 to 400 m. The areas of minimal ice content in the nearsurface layers coincide with the zone of maximum thickness of ice-free rocks. The ice relative content in Martian rocks becomes systematically higher from 30 deg latitude to the polars. The same tendency is observed in depth. The data obtained may be useful for the selecting of landing sites for Mars samples return and other missions.

Kuzmin, R. O.↗
NASA NTRS1975

Comparative studies of lunar, Martian, and Mercurian craters and plains

The spatial distribution of lunar smooth plains is not consistent with experimental simulations of melt rock emplacement during cratering in layered materials. Nor is it consistent with the location of melt rocks (suevite) near the Ries basin. Lunar smooth plains surrounding Imbrium are most extensive in areas where pre-existing craters are most degraded. This observation suggests that plains form by impact of basin and local primary crater ejecta, together with deposition of debris excavated by the resultant secondary cratering events. Craters within the belt of smooth plains surrounding the Caloris basin on Mercury are most degraded nearest the basin; this suggests that Mercurian smooth plains must, at least in part, be emplaced in a manner similar to plains surrounding the Imbrium basin. Mercurian uplands have a primary crater population deficient in small crater diameters (less than approximately 30 km). Lunar uplands far from major basins also have a crater population deficient in small crater sizes. Martian cratered terrain exhibits a similar crater deficiency, which was previously interpreted as due to obliteration of small craters (less than approximately 30 km) by some surface process. A crater size distribution deficient in small sizes (less than approximately 30 km) on the Mercurian, lunar, and Martian uplands has implications for the origin of debris bombarding the inner solar system during the period recorded by these surfaces. It is proposed that during late heavy bombardment, the inner solar system was inundated with bodies that broke up under tidal fission as they approached the planets. Such a mechanism would lend to production of a crater population deficient in small crater sizes, and it would also explain the large degree of spatial clustering of primary craters on Mercury, the moon, and Mars.

Oberbeck, V. R.↗
NASA NTRS2014

Nanoscale Compositional Relations in Lunar Rock Patina: Deciphering Sources for Patina Components on an Apollo 17 Station 6 Boulder

Space weathering on the Moon and other airless bodies modifies the surfaces of regolith grains as well as the space-exposed surfaces of larger rocks and boulders. As space weathering witness plates, rocks and boulders are distinguished from regolith grains based on their ability to persist as physically intact substrates over longer time scales before being disaggregated by impact processes. Because lunar surfaces, including exposed rocks, quickly develop an optically thick layer of patina, it is important to understand the compositional relationship between patinas and their underlying rock substrates, particularly to support remote-sensing of rocky lunar terrains. Based on analytical TEM techniques, supported by focused ion beam (FIB) cross-sectioning, we have begun to systematize the multi-layer microstructural complexity of patinas on rock samples with a range of space exposure histories. Our on-going work has particularly focused on lunar rock 76015, both because it has a long (approx. 22 my) exposure history, and because its surface was exposed to patina development approximately 1 m off the regolith surface on a boulder in the Apollo 17 Station 6 boulder field. Potential sources for the 76015 patina therefore include impact-melted and vaporized material derived from the local rock substrate, as well as from the mix of large boulders and regolith in the Station 6 area. While similar, there are differences in the mineralogy and chemistry of the rocks and regolith at Station 6. We were interested to see if these, or other sources, could be distinguished in the average composition, as well as the compositional nanostratigraphy of the 76015 patina. To date we have acquired a total of 9 TEM FIB cross-sections from the 76015 patina, giving us reasonable confidence of being able to arrive at an integrated average for the patina major element composition based on analytical TEM methods.

Christoffersen, R.↗
NASA NTRS1989

Spectral mapping of Alaskan ophiolites using Landsat Thematic Mapper data

Ophiolites are sections of oceanic lithosphere that have been exposed by thrusting in mountain belts. Thematic Mapper three-band color composites have been used to differentiate the main rock types of the ophiolites of the western Brooks Range, Alaska, and to map mineralogic variations produced by processes that affect oceanic lithosphere, such as mantle partial melting, hydration of ultramafic rock, formation of cumulate layers, and hydrothermal alteration and metamorphism of basalt. Scaled composites of TM Bands 7, 3, 1 and 5, 4, 2, and 3, 2, 1, displayed in red, green, and blue are most useful for visually differentiating rocks of the ophiolites. Ternary diagrams of digital number values are used to evaluate color variations observed in the three-band composites. Geologic maps, interpreted from TM images and reconnaissance field studies, are presented for the Asik Mountain, Maiyumerak Mountains, Avan Hills, and Misheguk Mountain ophiolites. The mapping results are being used to guide additional studies of the tectonics of the Brooks Range ophiolites.

Harding, David J.↗
NASA NTRS1981

Solute partitioning under continuous cooling conditions as a cooling rate indicator

A model of solute partitioning in a finite body under conditions of continuous cooling is developed for the determination of cooling rates from concentration profile data, and applied to the partitioning of zirconium between ilmenite and ulvospinel in the Apollo 15 Elbow Crater rocks. Partitioning in a layered composite solid is described numerically in terms of concentration profiles and diffusion coefficients which are functions of time and temperature, respectively; a program based on the model can be used to calculate concentration profiles for various assumed cooling rates given the diffusion coefficients in the two phases and the equilibrium partitioning ratio over a range of temperatures. In the case of the Elbow Rock gabbros, the cooling rates are calculated from measured concentration ratios 10 microns from the interphase boundaries under the assumptions of uniform and equilibrium initial conditions at various starting temperatures. It is shown that the specimens could not have had uniform concentrations profiles at the previously suggested initial temperature of 1350 K. It is concluded that even under conditions where the initial temperature, grain sizes and solute diffusion coefficients are not well characterized, the model can be used to estimate the cooling rate of a grain assemblage to within an order of magnitude.

Onorato, P. I. K.↗