Search NASA⌕ Search

SEARCH · Search NASA

Results for “legged”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Dependence of divertor turbulence on plasma density and current in TCV

To reliably predict the distribution of heat and particle fluxes at the target plates of tokamaks, a comprehensive understanding of turbulence throughout the entire Scrape-Off-Layer (SOL) is imperative. This study examines divertor turbulence systematically across a broad parameter range on the TCV tokamak, including variations in magnetic field direction, plasma current I p ∈ [140,320] kA, edge safety factor q 95 ∈ [2.6,4.7] and Greenwald fraction f G ∈ [0.18,0.6]. The TCV X-point Gas Puff Imaging (GPI) system is used to measure 2D filament properties in the inner and outer divertor region. The fluctuation levels in the divertor are found to strongly increase with density (to 80% over most of the SOL) while remaining insensitive to I p . The previously identified divertor-localized filaments (DLF), located on the bad curvature side of the outer divertor leg, are found to be a common feature on TCV, while no filaments are observed in the PFR. DLFs are present over most of the parameter space and in both field directions. However, they are absent, or appear only closer to the target, for sufficiently large Λ div ≳ 10 or q 95 ≳ 3.7. Across both I p and f G scans, some clear trends with Λ div are found for divertor filament sizes and velocities, and with target fall-off lengths of density and heat flux profiles at the outer target. This study provides important experimental insights to turbulent transport in the divertor also for comparison with self-consistent, turbulence simulations and extrapolation to future reactor conditions.

cross-field transport↗
DOE OSTI2026

Power and particle exhaust in the ST-E1 fusion power plant

Power exhaust challenges and potential solutions for a 5 m major radius, low-aspect ratio burning tokamak have been explored. 1D edge plasma models have been used to screen for access to detachment using short and long outer divertor legs in double and single null configurations, using Ar as the primary impurity and assuming tungsten plasma-facing components (PFCs). These show that detachment access can be accessed for all but the most conservative assumptions on scrape-off layer (SOL) width and power, but that trade-offs will be required between magnet engineering and the size of the acceptable window of as-yet uncertain plasma parameters. SOLPS-ITER was used to further model selected plasma scenarios, confirming that Ar seeding can be used to achieve dissipative divertor scenarios with peak deposited heat fluxes below 15 MWm -2 . Initial scoping of first wall loads and positioning of limiters has been carried out, showing the feasibility of protecting the breeding blanket wall during steady state without impeding tritium breeding. Initial PFC technology selection is also presented, identifying this as a critical area where further work is needed to find an attractive solution for helium-cooled PFCs that can handle high heat fluxes without excessive power requirements. Key questions and trade-offs for concept development have been identified, including: how to achieve high radiation for reduction of SOL power without core performance degradation; whether power exhaust can be well-controlled in a double null plasma; mechanical design and materials challenges of high-heat flux PFCs; and control of material erosion, redeposition and tritium retention.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Accelerating LHC event generation with simplified pilot runs and fast PDFs

High-precision calculations are an indispensable ingredient for the success of the LHC physics programme, yet their poor computing efficiency has been a growing cause for concern, threatening to become a paralysing bottleneck in the coming years. We present solutions to eliminate the apprehension by focussing on two major components of generalpurpose Monte Carlo event generators: the evaluation of parton distribution functions, and the generation of perturbative matrix elements. We show that for the cost-driving event samples employed by the ATLAS experiment to model omnipresent, irreducible Standard Model backgrounds, such as weak boson or top-quark pair production in association with jets, these computational components dominate the overall run time by up to 80 %. We demonstrate that a reduction of the computing footprint of LHAPDF and SHERPA by factors of around 40 can be achieved for multi-leg NLO event generation.

Bothmann, Enrico [Gottingen U.]↗
DOE OSTI2025

Beyond fragmented dopant dynamics in quantum spin lattices: Robust localization and non-Gaussian diffusion

The motion of dopants in magnetic spin lattices has received tremendous attention for at least four decades due to its connection to high-temperature superconductivity. Despite these efforts, we lack a complete understanding of their behavior, especially out of the equilibrium and at nonzero temperatures. In this paper, we take a significant step towards a much deeper understanding based on state-of-the-art matrix-product-state calculations. In particular, we investigate the nonequilibrium dynamics of a dopant in two-leg 𝑡−𝐽 ladders with antiferromagnetic XXZ spin interactions. In the Ising limit, we find that the dopant is localized for all investigated nonzero temperatures due to an emergent disordered potential, with a localization length controlled by the underlying correlation length of the spin lattice, which increases exponentially with decreasing temperature. The dopant, hereby, only delocalizes asymptotically in the zero temperature limit. This greatly generalizes the localization effect discovered recently in Hilbert space fragmented models [Phys. Rev. Res. 6, 023325 (2024), SciPost Phys. Core 7, 054 (2024)]. In the presence of spin-exchange processes at rate 𝛼, the dopant diffuses with a diffusion coefficient, 𝐷 ℎ , depending nonmonotonically on 𝛼. It initially increases linearly as 𝐷 ℎ ∝ 𝛼 for 𝛼 ≪ 1 before dropping off as 𝛼 −1 for 𝛼 > 1. Moreover, we show that the underlying spin dynamics at infinite temperature behaves qualitatively the same, albeit with important quantitative differences. We substantiate these findings by showing that the dynamics features self-similar scaling behavior, which strongly deviates from the Gaussian behavior of regular diffusion, especially for weak spin exchange. Finally, we show that the diffusion coefficient 𝐷 ℎ follows an Arrhenius relation at high temperatures, whereby it is exponentially suppressed upon cooling.

Anomalous diffusion↗
DOE OSTI2026

Dynamical correlations and nonequilibrium sum rules in photodoped Hubbard ladders

Using matrix product state techniques we study the nonequilibrium dynamical response of the half-filled Hubbard ladder when subject to an optical pump. Optical pumping offers a way of producing and manipulating new strongly correlated phenomena by suppressing existing magnetic correlations. The ladder allows the effects of pump directionality to be investigated, and compared to a single chain it has strong spin-charge coupling and a fully gapped excitation spectrum, promising different nonequilibrium physics. We compute time-dependent correlations, including the nonequilibrium dynamical structure factors for spin and charge. By deriving a combined spin-charge sum rule that applies both in and out-of-equilibrium, we show that spectral weight is pumped directly from the antiferromagnetic spin response into a low energy 𝜔 ∼ 0 charge response below the Mott gap. The transfer of weight is pump direction dependent: pumping directed along the legs disrupts magnetic correlations more than pumping in the rung-direction, even if the post-pump energy density is similar. The charge correlation length is dramatically enhanced by the pump, whilst the spin correlations are most strongly suppressed at nearest- and next-nearest-neighbor spacings. After the pump the system is in a nonthermal correlated metallic state, with gapless charge excitations and approximately equal spin and charge correlation lengths, emphasizing the importance of treating these degrees of freedom on an equal footing in nonequilibrium systems.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Block-Type Antiferromagnetism in Single Chain Quasi-One-Dimensional K 3 ⁢Fe 2 ⁢Se 4

One-dimensional (1D) structures provide a unique platform to study the correlated quantum interactions and phase transitions such as unconventional magnetism and superconducting states. Here, we report that iron chalcogenide K 3 ⁢Fe 2 ⁢Se 4 exhibits an unusual block-type canted antiferromagnetic (AFM) order with a clear single chain quasi-1D structure, which is structurally different from the two-leg ladder BaFe 2 ⁢Se 3 , through both experimental measurements and density matrix renormalization group (DMRG) calculations. The narrow bandgap semiconductor K 3 ⁢Fe 2 ⁢Se 4 has a quasi-1D edge-shared FeSe4 tetrahedra chain structure and orders antiferromagnetically below 110 K. The magnetic moments couple antiferromagnetically along the quasi-1D chain direction of the 𝑏 axis and form an up-down-down-up (↑−↓−↓−↑)–like spin structure with a commensurate propagation vector 𝒌=⁢(0,0,0), where block-type spin ↑−↑ or ↓−↓ coupling are between the longer Fe-Fe bonds of the quasi-1D chain. DMRG results show that block antiferromagnetic state is stable in K 3 ⁢Fe 2 ⁢Se 4 and reveal that the block-ordered arrangement of Fe 2.5+ ions spins arise from the competition between ferromagnetic and AFM interaction in the presence of strong electronic correlation. Our research results not only report the discovery of a clear block-type canted antiferromagnetic structure in a real quasi-1D chain material but also provide a theoretical approach to understand the block-type antiferromagnetism in quasi-1D iron chalcogenides.

antiferromagnetism↗
DOE OSTI2024

Luther-Emery liquid and dominant singlet superconductivity in the hole-doped Haldane spin-1 chain

We investigate the pairing tendencies in the hole-doped Haldane spin-1 chain. To allow for doping, we extend the original spin chain Hamiltonian into a fermionic model involving a two-orbital Hubbard chain at intermediate or strong repulsive interaction strengths U and for degenerate orbitals. At half filling and large U, the ferromagnetic Hund's coupling, J H , generates effective spin-1 moments, with antiferromagnetic correlations between sites. Using large-scale density matrix renormalization group calculations, we accurately study the system's behavior under light hole-doping. For U = 1.6 in units of the noninteracting bandwidth and for J H /U ≳ 0.275, we find that singlet pairing dominates the long-distance physics, establishing this system as a promising platform for repulsively mediated superconductivity. We provide concrete examples of materials that could realize the physics described here. We also provide evidence that the system approaches a Luther-Emery liquid state at large system sizes, reminiscent of the behavior of doped one-orbital two-leg ladders at weak coupling, which also have superconducting tendencies. The numerically calculated central charge approaches one in the thermodynamic limit, indicating a single gapless mode as is expected for the Luther-Emery state. Exponents characterizing the power-law decays of singlet pair-pair and charge density-density correlations are determined, and found to approximately satisfy the Luther-Emery identity.

1-dimensional systems↗
DOE OSTI2024

Pairing tendencies in the doped Kitaev-Heisenberg model

Here, we study the impact of hole doping on the Kitaev-Heisenberg model on the honeycomb lattice. We investigate the pairing tendencies and correlation functions in the framework of a t - J - K model using density matrix renormalization group calculations on three-leg cylinders. In the case of the pure Kitaev model, which realizes a quantum spin-liquid phase at half-filling, we find that binding of two holes only occurs at low values of the hopping, where the holes are slow. We have theoretically verified that pair formation occurs in the limit of immobile holes, where the pure Kitaev model remains exactly solvable. When we instead fix the hopping at an intermediate, more realistic, value, and vary the Heisenberg and Kitaev interaction strengths, we find pairing tendencies only in the Néel phase. This is in contrast to prior mean-field calculations, highlighting the importance of accounting for the kinetic energy of dopants in generalized Kitaev models. Interestingly, we also find signatures of pair-density wave formation over the studied range of model parameters, namely, a periodic modulation of the charge density as well as the spin-spin and pair-pair correlations in real space. Moreover, we present a comparative study of the different correlations as a function of doping. We finally discuss the potential for experimentally observing the studied physics in quantum materials and heterostructures.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Superconductivity in the lightly doped Hubbard model on the cylindrical honeycomb lattice

Here, we have performed large-scale density-matrix renormalization group studies of the lightly doped Hubbard model on the honeycomb lattice on long three- and four-leg cylinders. We find that the ground state of the system upon lightly doping is consistent with that of a superconducting state with coexisting quasi-long-range superconducting and charge density wave orders. Both the superconducting and charge density wave correlations decay as a power law at long distances with corresponding exponents 𝐾 𝑠⁢𝑐 < 2 and 𝐾 𝑐 < 2. On the contrary, the spin-spin and single-particle correlations decay exponentially, although with relatively long correlation lengths.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

All-loop soft theorem for pions

In this paper we discuss a generalization of the Adler zero to loop integrands in the planar limit of the S U ( N ) nonlinear sigma model (NLSM). The Adler zero for integrands is violated starting at the two-loop order and is only recovered after integration. Here we propose a soft theorem satisfied by loop integrands with any number of loops and legs. This requires a generalization of NLSM integrands to an off shell framework with certain deformed kinematics. Defining an , we identify a simple nonvanishing soft behavior of integrands, which we call the . We find that the proposed soft theorem is satisfied by the “surface” integrand of Arkani-Hamed and Figueiredo [], which is obtained from the shifted Tr φ 3 surfacehedron integrand. Finally, we derive an on shell version of the algebraic soft theorem that takes an interesting form in terms of self-energy factors and lower-loop integrands in a mixed theory of pions and scalars. Published by the American Physical Society 2024

Astronomy & Astrophysics↗
DOE OSTI2024

Broadening of the Divertor Heat Flux Profile in High Confinement Tokamak Fusion Plasmas with Edge Pedestals Limited by Turbulence in DIII-D

Multimachine empirical scaling predicts an extremely narrow heat exhaust layer in future high magnetic field tokamaks, producing high power densities that require mitigation. Here, in the experiments presented, the width of this exhaust layer is nearly doubled using actuators to increase turbulent transport in the plasma edge. This is achieved in low collisionality, high confinement edge pedestals with their gradients limited by turbulent transport instead of large-scale, coherent instabilities. The exhaust heat flux profile width and divertor leg diffusive spreading both double as a high frequency band of turbulent fluctuations propagating in the electron diamagnetic direction doubles in amplitude. The results are quantitatively reproduced in electromagnetic XGC particle-in-cell simulations which show the heat flux carried by electrons emerges to broaden the heat flux profile, directly supported by Langmuir probe measurements.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Emergent interaction-induced topology in Bose-Hubbard ladders

We investigate the quantum many-body dynamics of bosonic atoms hopping in a two-leg ladder with strong on-site contact interactions. We observe that when the atoms are prepared in a staggered pattern with pairs of atoms on every other rung, singlon defects, i.e., rungs with only one atom, can localize due to an emergent topological model, even though the underlying model in the absence of interactions admits only topologically trivial states. This emergent topological localization results from the formation of a zero-energy edge mode in an effective lattice formed by two adjacent chains with alternating strong and weak hoping links (Su-Schrieffer-Heeger chains) and opposite staggering which interface at the defect position. Our findings open the opportunity to dynamically generate nontrivial topological behaviors without the need for complex Hamiltonian engineering. Published by the American Physical Society 2025

Wellnitz, David (ORCID:0000000349788938)↗
DOE OSTI2025

Energy-enhanced expansion of the standard model effective field theory

We formalize energy-scaling arguments in the standard model effective field theory (SMEFT) to estimate the effects of operators up to dimension ten. Our approach relies on weakly coupled UV completions with no presumed large hierarchies between the Wilson coefficients. We introduce a classification based on the number of external legs and an energy-counting parameter. We establish a dual expansion in 𝑣/Λ and 𝐸/Λ. Extending to four-, five-, and six-particle vertices, our framework highlights energy-enhanced operators that dominate high-energy processes at the High Luminosity-Large Hadron Collider. This organization streamlines experimental analyses to only include operators with energetic impact in their analyses and enhances the discoverability of new physics within the SMEFT framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

A Novel Low-Profile High-Efficiency Three-Phase Matrix Transformer

High step-down isolated DC-DC conversion from an 800 V DC bus to low-voltage, high-current outputs is required in automotive auxiliary converters and data center power supplies. In such applications, conventional transformer-based converters require large turns ratios, which increase winding resistance, leakage inductance, and magnetic height. This paper proposes a novel low-profile three-phase matrix transformer that realizes a large effective voltage ratio through flux division among multiple secondary legs, without increasing the physical turns count of each winding. As a result, the proposed structure reduces copper usage and transformer height while preserving the voltage conversion capability of a conventional three-phase transformer. Finite element analysis shows that the proposed design reduces magnetic height by 27%, ferrite volume by 34%, and copper volume by 28%. Circuit-level simulations of an 800 V/12 V,3 kW CLLLC dual-active-bridge converter further show that the lower winding resistance reduces total system loss by 91% and increases DC-DC efficiency from 82.6% to 97.6% at 3 kW output.

Inoue, Shuntaro [ORNL] (ORCID:0000000262637627)↗
DOE OSTI2026

A Low Loss, Fast Ramp HTS Solenoid Prototype for Compact Spherical Tokamaks

To explore AC loss characteristics of commercial Bi-2212 conductors made in the USA, a small ohmic heating (OH) prototype coil is being developed for compact tokamaks using high performance Bi-2212 wires newly manufactured by Bruker EST. Here, the goal is to build and test Bi-2212 prototype coils for fast ramp central solenoid (CS) operation of spherical tokamaks (ST). For a ST pilot plant, one of the key challenges is the tight space available for CS in a center column where in-board legs of the toroidal field (TF) and OH coils are assembled into a cryostat with a few millimeters clearance. A high current density Rutherford cable consisting of 17 legacy Bi-2212 wires, a contribution of the US Magnet Development Program (MDP), was fabricated at the Lawrence Berkeley National Laboratory (LBNL) for the development of fast ramp CS magnets in the ST Advanced Reactor (STAR) designed by PPPL. Characterization of the new and legacy HTS wires is presented, along with the coil design wound directly with new wire, and a Rutherford cable-wound solenoid using the legacy wire. A comparison of AC losses is made based on expected performance for a fast ramp ST operation. The HTS cable and cabled coil fabrication issues such as the heat treatment, coil mandrel design, assembly and 2212 quench characteristics are discussed, along with a test plan for CS design validation.

Zhai, Yuhu [Princeton Plasma Physics Laboratory (P↗
DOE OSTI2025

Machine learning-driven design and self-sensing capabilities of automotive bumper lattices for adaptive impact response

We present a novel approach to design an automotive bumper energy absorber using carbon fiber reinforced polymer composites, optimized to meet conflicting performance requirements for two distinct impact scenarios. The design must satisfy both a low-speed (2.5 mph) pendulum intrusion test, simulating vehicle-to-vehicle collisions, and a high-speed (25 mph) leg flexion test, replicating pedestrian impacts. These tests demand opposing deformation characteristics: high flexibility (deformation < 85 mm) for the former and high stiffness (deformation < 22 mm) for the latter. To address these contradictory requirements, we developed a machine learning (ML) framework for inverse optimization of lattice designs and material selection. Unlike traditional iterative design processes, our ML model directly outputs optimal design parameters and material choices based on target performance inputs. The energy absorber was fabricated using advanced additive manufacturing techniques, including extrusion deposition and digital light processing. The integration of carbon fibers provides multifunctionality to the bumper structure, enabling self-sensing capabilities through changes in electrical resistivity under compression. This electrical response demonstrates high repeatability under multiple cycles at 2% compression and exhibits distinct signatures during crack formation under high deformation. This research offers adaptive performance through innovative design methodologies and smart material integration. The approach has potential applications in various fields requiring adaptive energy absorption and real-time structural health monitoring.

Chawla, Komal [ORNL] (ORCID:0000000190327565)↗
DOE OSTI2025

Evaluating Entrainment–Mixing Characteristics through Direct Comparisons of Drop Size Distributions Using In Situ Observations from ACE-ENA

Abstract Constraining the impacts of entrainment and associated mixing (i.e., entrainment–mixing) on cloud properties continues to be difficult, partly due to observational uncertainties as well as a lacking consensus of which methodologies for diagnosing entrainment–mixing are most appropriate. This study introduces a novel method to evaluate the presence and degree of inhomogeneous and homogeneous mixing using ∼100 h of in situ observations from a research aircraft over the northeastern Atlantic. Specifically, drop size distributions are compared between regions containing negligible and significant entrainment for select flight legs, making a direct characterization of the degree of homogeneous and inhomogeneous mixing possible. A measure of drop concentration variance is used as a proxy variable to diagnose entrainment–mixing. Results correspond well with entrainment–mixing metrics, showing lower Damköhler numbers where drop size distributions shift toward smaller drop sizes (i.e., inhomogeneous mixing) and greater transition length scales where drop size distributions do not (i.e., homogeneous mixing). Inhomogeneous mixing occurs in most samples from Aerosol and Cloud Experiment in the Eastern North Atlantic (ACE-ENA) (regardless of homogeneous mixing frequencies increasing with increasing spatial resolution from ∼100 to ∼10 m) and is associated with decreased drop size relative dispersion and both greater aerosol and drop concentrations compared with homogeneous mixing. Precipitating clouds have a greater frequency of homogeneous mixing compared with nonprecipitating clouds. The proposed methodology is similarly applied to in situ observations of southeast Pacific stratocumulus, shallow convective clouds over central Oklahoma and low-level clouds over the Southern Ocean. All four locations are primarily dominated by inhomogeneous mixing with minimal variability among each region.

Clouds↗
DOE OSTI2024

Preliminary Workforce Development and Environmental and Co-use Management Plans for a Floating Offshore Wind Platform - CRADA 609 (Final Report)

Pacific Northwest National Laboratory (PNNL) provided technical assistance to Glosten, Inc. and its affiliate, PelaStar, LLC to advance the development of their floating offshore wind (FOSW) platform. PNNL provided guidance and assessment in two areas that are important to address in the development of FOSW platforms: (1) workforce development and (2) environmental impacts and ocean co-use considerations. This work was funded by the U.S. Department of Energy’s (DOE) Wind Energy Technologies Office (WETO) through Phase 2 of the FLoating Offshore Wind ReadINess (FLOWIN) Prize. It should be noted that the Plans presented in this report are specific to the PelaStar tension-leg platform (TLP) and may not be applicable to all FOSW platforms. Workforce development and environmental/co-use impacts are highly dependent on the geographical region in which activities take place. At the request of PelaStar, PNNL focused on two regions where development may take place: the Gulf of Maine and Northern California. PNNL generated a preliminary Workforce Development Plan for PelaStar, which includes estimated job numbers and skillsets required to establish a workforce to manufacture, install, and operate their platform as part of FOSW projects. The Plan offers methods to increase diversity, equity, and inclusion practices when developing a new workforce and includes colleges and training centers for potential recruitment. Both positive and negative impacts to communities are evaluated, with potential mitigation strategies for reducing negative impacts. The structure of Community Benefit Agreements and Project Labor Agreements are discussed, noting the limitations of the role of a platform manufacturer versus the offshore wind developer. PNNL also drafted a preliminary Environmental and Co-Use Management Plan that serves as a guide to preparing an environmental assessment related to the installation and operation of PelaStar’s unique TLP design, including its potential ecological, socioeconomic, and emissions impacts. The Plan summarizes information on relevant regulatory requirements, potential impact producing factors, monitoring and mitigation measures, and physical and biological resources in the Gulf of Maine and Northern California. One of the primary perceived benefits of the PelaStar TLP is its reduced footprint due to its tensioned tendons versus catenary or taut moorings, but more research must be done as there are no studies on PelaStar’s TLP system to-date. The section also highlights ocean co-use considerations for PelaStar’s TLP system, specifically for fisheries, including existing perspectives, methods, examples, and limitations. The PNNL team established through this preliminary work and review of available literature and resources that there is not yet much research or planning around FOSW. With FOSW being a new industry, many of the findings and planning are adapted from fixed bottom offshore wind, which itself is only just taking off in the United States. More research is needed to establish best practices for workforce development and to assess environmental and ocean co-use impacts and mitigation approaches.

17 WIND ENERGY↗