Search NASA⌕ Search

SEARCH · Search NASA

Results for “lignin structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Effect of Dilute Acetic Acid Hydrolysis on Xylooligosaccharide Production and the Inhibitory Effect of Cellulolytic Enzyme Lignin from Poplar

Acetic acid (AC) hydrolysis has been reported to prepare xylooligosaccharides (XOS) from poplar. However, the influence of AC hydrolysis on the lignin structure changes is not clear, which is important for the following enzymatic hydrolysis of poplar. Herein, AC was used to produce XOS, and cellulase adsorption on cellulolytic enzyme lignin (CEL) from AC-hydrolyzed poplar and its inhibitory effect on two commercial cellulase preparations were investigated. AC hydrolysis gave a XOS yield of 39.8% from poplar. After AC hydrolysis at 170 °C, the hydrophobicity and ζ-potential of CEL decreased to 2.3 L/g and 14.8 mV, respectively. The adsorption strength of CTec2 on CEL samples did not increase by AC hydrolysis, and the inhibitory effect of CEL on Celluclast 1.5L and β-glucosidase was observed, but not on CTec2. CEL samples improved the lytic polysaccharide monooxygenase (LPMO) activity of the enzymatic hydrolysis by CTec2. After CEL samples were added in enzymatic hydrolysis, the free filter paper activity of Celluclast 1.5L and β-G retained in the enzymatic hydrolysate decreased from 60.5 to 29.3–42.9%. The addition of CEL samples in enzymatic hydrolysis could not decrease the free filter paper activity of CTec2 retained in the enzymatic hydrolysate. In the enzymatic hydrolysis with CEL samples, higher glucose yields were obtained by CTec2 than those by Celluclast 1.5L and β-glucosidase. This work will help to understand the structure and inhibitory effects of AC-CELs and guide the development of AC hydrolysis for the production of XOS and monosaccharides from poplar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Controllable depolymerization of lignin using carbocatalyst graphene oxide under mild conditions

Many efforts have been devoted to depolymerizing lignin to high-value aromatic monomers. However, a controllable and complete lignin inter-unit bond cleavage remains difficult because of the randomness in lignin structure and low selectivity in catalysis. Herein, we demonstrate that a sole carbocatalyst graphene oxide (GO) can selectively oxidize aryl- and alkyl-hydroxyl groups of lignin without the presence of any additional oxidizers, leading to lignin degradation under mild conditions. The results from lignin dimers, lignin oligomers, and organosolv lignin indicate that the depolymerization is catalyzed via an oxidative mechanism through an enol ether intermediate, a stable intermediate that has been chemically isolated here. Quantum chemistry calculations at the density functional theory level indicate that the phenolic –OH group in lignin facilitates the formation of radical cations and thus prohibits ring opening reactions, leading to the complete conversion of lignin dimers to guaiacol through the enol ether intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Control of Carbon Allocation in Phenylpropanoid Metabolism

Understanding the molecular mechanisms by which carbon flux is partitioned in plants, and how flux through the phenylpropanoid pathway in particular is regulated and allocated to different branches of the pathway is essential for the eventual rational manipulation of phenylpropanoid flux for bioenergy applications. The phenylpropanoid pathway is responsible for the biosynthesis of a diverse array of metabolites essential for structural integrity, water transport, UV protection, and defense against herbivores and pathogens. The products of the phenylpropanoid pathway, all of which are derived from phenylalanine, range from complex, insoluble polymers such as lignin and suberin, to soluble flavonoids and hydroxycinnamate esters, to volatile compounds used to attract pollinators. By far the most abundant of these is the complex heteropolymer lignin, which accounts for a significant portion of the dry weight of not only woody plants, but also of crop residues. Decreasing or altering lignin structure to provide increased cell wall digestibility could greatly increase the cost effectiveness of converting cell wall polysaccharides to ethanol or second-generation biofuels. On the other hand, it is also possible that plants engineered to accumulate higher levels of lignin could provide improved feedstock for direct combustion and electricity generation as part of a diverse bioenergy portfolio. Consistent with the enormous commitment of energy and carbon it requires, the synthesis of lignin is under tight regulatory control. In order to influence transcription, gene-specific activators and repressors must interact with basal transcription factors and the rest of the core transcriptional machinery. In eukaryotes, this interaction is bridged by the large, multi-subunit complex known as Mediator. Despite the clear importance of Mediator throughout the eukaryotes, the complex has only recently been studied in plants. We have shown that a pair of Mediator subunits, MED5a and MED5b are required for normal regulation of phenylpropanoid pathway product accumulation. Plants lacking these proteins show increased accumulation of phenylpropanoids in multiple tissues indicating that normally they directly or indirectly repress expression of phenylpropanoid pathway genes. Furthermore, we have recently shown that MED5 plays a role in dwarfing in some low lignin plants and feedback between and within metabolic pathways of secondary metabolism in Arabidopsis. Taken together with the established roles of Mediator in transcriptional regulation, and of MED5a and MED5b in the repression of phenylpropanoid metabolism, these observations suggest that MED5a and MED5b are key components of an active, transcriptional process by which phenylpropanoid homeostasis is maintained in wild-type plants. Our research focused on expanding our understanding of the role of Mediator, as well as elucidating the mechanisms by which these proteins influence phenylpropanoid biosynthesis and how metabolite accumulation within the pathway and between metabolic pathways is essential for feedback regulatory control. This research will inform future bioengineering efforts aimed at altering carbon allocation and cell wall engineering by contributing to our understanding of the role of Mediator in regulating lignin biosynthesis, a pathway of plant metabolism that is important on a global scale.

09 BIOMASS FUELS↗
DOE OSTI2024

Nonthermal hydrogen plasma-enabled ambient, fast lignin hydrogenolysis to valuable chemicals and bio-oils

The reduction of fossil fuel resources and the ongoing surge in global energy demand have captured the interest of researchers worldwide, prompting a focus on developing renewable energy sources. For this reason, biomass conversion has emerged as a crucial pathway for renewable fuel production. Lignin, constituting 10–35% of woody biomass, represents a significant and largely untapped sustainable feedstock. Despite the potential of lignin, a substantial portion of this lignocellulosic residue remains unused, with approximately 60% considered waste. This study addresses the challenge of underutilized lignin by introducing an innovative approach to its hydrogenolysis. Despite their potential, existing hydrogenolysis methods face obstacles such as complexity, high cost, and the need for high temperatures or pressures. Herein we report a noncatalytic nonthermal hydrogen plasma method for lignin hydrogenolysis, conducted under ambient temperature and pressure conditions. Our method proves to be highly effective in breaking lignin bonds, achieving complete conversion, and generating valuable gaseous and bio-oil products including methane and aromatic dimers and monomers obtained from guaiacyl and syringyl units within the lignin structure. Our results showed an increase in gaseous products, especially methane, and aromatic monomer yields, as well as a reduction in total bio-oil and biochar yields and lignin functional groups by increasing reaction time, input power, and H2 partial pressure. This research confirms the considerable promise of utilizing noncatalytic nonthermal hydrogen plasma-assisted hydrogenolysis as an effective technique for producing gaseous and liquid fuels from lignin.

Pishva, Parsa↗
DOE OSTI2024

Use of Renewable Alcohols in Autocatalytic Production of Aspen Organosolv Lignins

This study aimed to investigate the intrinsic efficiency of renewable alcohols, applied under autocatalytic conditions, for removing lignin from aspen and hot-water-extracted aspen while substantially preserving the lignin structure so as to facilitate various valorization strategies. Ethylene glycol (EG), propylene glycol (PG), 1,4-butanediol (BDO), ethanol (EtOH), and tetrahydrofurfuryl alcohol (THFA) were evaluated based on their lignin solubilization ability, expressed as the relative energy difference (RED) following the principles of the Hansen solubility theory. The findings indicate that alcohols with a higher lignin solubilization potential lead to increased delignification, almost 90%, and produce a lignin with a higher content of β-O-4 bonds, up to 68% of those found in aspen milled wood lignin, thereby indicating their potential for valorization through depolymerization. However, these alcohols also produce lignin with a higher content of β-β and β-5 bonds, resulting in a higher molecular weight and polydispersity, due to readily occurring homolytic reactions. Hot-water extraction (HWE) conducted prior to alcohol treatment reduced the delignification efficiency and resulted in a lignin with a lower β-O-4 bond content. The lignins produced in these experiments exhibited a superior UV-A absorption capacity compared with synthetic benzophenone, as well as a greater radical quenching ability than synthetic butylated hydroxytoluene, indicating their potential for use in the protection of polymers against degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Preface to Special Issue of ChemSusChem on Lignin Valorization: From Theory to Practice

In this Editorial, Guest Editors Run-Cang Sun, Joseph S. M. Samec, and Arthur J. Ragauskas introduce the Special Issue of ChemSusChem on Lignin Valorization: From Theory to Practice. Here, the significance of and enormous challenges for the utilization of lignin are reviewed, and the contents of the Special Issue with highly interesting contributions from scientists around the world are outlined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Natural deep eutectic solvent mediated extrusion for continuous high-solid pretreatment of lignocellulosic biomass

Several deep eutectic solvents (DESs) have been demonstrated to be highly effective for lignocellulosic biomass pretreatment, combining the advantages of simple synthesis, relatively low chemical cost and better biocompatibility. However, low biomass loading that is usually involved with DES pretreatment hinders its practical use. Here, a twin-screw extruder was used for pretreating biomass sorghum bagasse at solid loadings up to 50%, mediated by a neutral-pH DES, choline chloride : glycerol (ChCl : Gly). This continuous extrusion process led to high glucose and xylose yields of >85% from enzymatic saccharification of the pretreated sorghum. A combination of microscopic, spectroscopic, and X-ray diffraction analyses demonstrate a high degree of defibration and disruption of the biomass cell wall structures; however, little or no change in chemical compositions. Further results from gel permeation chromatographic (GPC) and nuclear magnetic resonance (NMR) spectroscopic analyses indicate that ChCl : Gly-mediated extrusion preserved the basic lignin structural characteristics with no significant differences between extruded biomass at a solid loading of 30% and 50%. This study demonstrates the potential of DES-mediated extrusion as a highly effective continuous high-solid biomass pretreatment technology for industrially relevant applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Assessing the availability of two bamboo species for fermentable sugars by alkaline hydrogen peroxide pretreatment

We report this study comprehensively investigated two bamboo species (i.e. Neosinocalamus affinis and Phyllostachys edulis) in terms of their cell wall ultrastructure, chemical compositions, enzymatic saccharification, and lignin structure before and after alkaline hydrogen peroxide pretreatment (AHP). During AHP, Neosinocalamus affinis (NAB) had higher delignification than Phyllostachys edulis (PEB), and thus showed better enzymatic digestibility (93.05% vs 53.57% for glucan). The fundamental chemical behavior of the bamboo lignins was analyzed by fluorescence microscope (FM), confocal Raman microscope (CRM), molecular weight analysis, and 2D HSQC-NMR. Results indicated that the PEB has thicker cell wall and more concentrated lignin in its compound middle lamella and cell corner middle lamella than NAB. Moreover, PEB lignin contains more G units (S/G of 0.95), in evident contrast to that of NAB lignin (S/G of 1.30), which favor the formation of C–C linkages, thus impeding its degradation during the AHP.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Expression of a bacterial 3-dehydroshikimate dehydratase (QsuB) reduces lignin and improves biomass saccharification efficiency in switchgrass (Panicum virgatum L.)

Abstract Background Lignin deposited in plant cell walls negatively affects biomass conversion into advanced bioproducts. There is therefore a strong interest in developing bioenergy crops with reduced lignin content or altered lignin structures. Another desired trait for bioenergy crops is the ability to accumulate novel bioproducts, which would enhance the development of economically sustainable biorefineries. As previously demonstrated in the model plant Arabidopsis, expression of a 3-dehydroshikimate dehydratase in plants offers the potential for decreasing lignin content and overproducing a value-added metabolic coproduct (i.e., protocatechuate) suitable for biological upgrading. Results The 3-dehydroshikimate dehydratase QsuB from Corynebacterium glutamicum was expressed in the bioenergy crop switchgrass ( Panicum virgatum L.) using the stem-specific promoter of an O-methyltransferase gene ( pShOMT ) from sugarcane. The activity of pShOMT was validated in switchgrass after observation in-situ of beta-glucuronidase (GUS) activity in stem nodes of plants carrying a pShOMT::GUS fusion construct. Under controlled growth conditions, engineered switchgrass lines containing a pShOMT::QsuB construct showed reductions of lignin content, improvements of biomass saccharification efficiency, and accumulated higher amount of protocatechuate compared to control plants. Attempts to generate transgenic switchgrass lines carrying the QsuB gene under the control of the constitutive promoter pZmUbi-1 were unsuccessful, suggesting possible toxicity issues associated with ectopic QsuB expression during the plant regeneration process. Conclusion This study validates the transfer of the QsuB engineering approach from a model plant to switchgrass. We have demonstrated altered expression of two important traits: lignin content and accumulation of a co-product. We found that the choice of promoter to drive QsuB expression should be carefully considered when deploying this strategy to other bioenergy crops. Field-testing of engineered QsuB switchgrass are in progress to assess the performance of the introduced traits and agronomic performances of the transgenic plants.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

A tailored fast thioacidolysis method incorporating multi-reaction monitoring mode of GC-MS for higher sensitivity on lignin monomer quantification

Abstract Thioacidolysis is widely used for lignin structural characterization by cleaving β-aryl ethers to release syringyl (S), guaiacyl (G), and p -hydroxyphenyl (H) monomers followed by GC analysis. However, the traditional thioacidolysis method requires tedious extraction steps with chlorinated solvent underlying harmful to health, limiting its efficiency and application. Herein, an improved thioacidolysis method with high sensitivity for the quantitation of lignin-derived monomers was developed. The improved protocol used a quick, streamlined procedure to recover the monomeric products using ethyl acetate as extracting solvent and MS detector in multi-reaction monitoring mode to enhance its ability to detect extremely low concentration (0.1 ppb with signal-to-noise higher than 2) of monomeric products. Additionally, a fast GC program was established to speed up the GC quantitation. Several representative lignocellulose samples, including gymnosperm, angiosperm, and poaceae, were used to test this tailored method. The results demonstrated that the ratios of lignin monomer compositions determined by this method were consistent with that of traditional procedure despite the slightly higher monomer yields measured. More importantly, this method uses non-chlorinated solvent for microscale extraction and requires no evaporation step for workup, which is a green and efficient way for the quantification of lignin monomer compositions.

Forestry↗
DOE OSTI2020

Monolignol Benzoates Incorporate into the Lignin of Transgenic Populus trichocarpa Depleted in C3H and C4H

Lignin, an abundant renewable aromatic biopolymer, is an essential macromolecule in terrestrial vascular plants. Genetic modifications affecting monolignol biosynthesis, which produces lignin monomers, alter the metabolic flux through the pathway and are becoming increasingly explored for improving the lignin and biomass quality and for producing high-value commodity chemical feedstocks. Benzoate (BA) conjugates are important metabolites in plants that have not been adequately characterized as components of the lignin structure. In addition to finding trace levels of BA conjugates in wild-type (WT) Populus trichocarpa, these become significantly augmented in strategic triple transgenics. Genes for three key cytochrome P450 enzymes, two 4-hydroxylases (PtrC4H1 and PtrC4H2), and one 3-hydroxylase (PtrC3H3), were downregulated to produce the transgenic plants in which monolignol benzoate (ML-BA) conjugates were incorporated into their lignin at a level some 16-fold higher than in WT. The co-downregulation of PtrC4H1/PtrC4H2/PtrC3H3 genes may cause a rerouting or modification of the pathway due to the interaction of the benzoate biosynthetic pathway with the conventional pathway for monolignol biosynthesis. The total lignin content in the transgenics was decreased by 50%, and the lignin H-unit level was elevated some 70-fold. The wood from the transgenic trees showed reduced recalcitrance toward enzymatic saccharification, which has value for the conversion of plant biomass to bioenergy.

2D NMR↗
DOE OSTI2024

Lignin Deoxygenation for the Production of Sustainable Aviation Fuel Blendstocks

Lignin is an abundant source of renewable aromatics that has long been targeted for valorization. Traditionally, the inherent heterogeneity and reactivity of lignin has relegated it to direct combustion, but its higher energy density compared with polysaccharides makes it an ideal candidate for biofuel production. This Review critically assesses lignin's potential as a substrate for sustainable aviation fuel blendstocks. Lignin can generate the necessary cyclic compounds for a fully renewable, sustainable aviation fuel when integrated with current paraffinic blends and can meet the current demand 2.5 times over. Using an energy-centric analysis, we show that lignin conversion technologies have the near-term potential to match the enthalpic yields of existing commercial sustainable aviation fuel production processes. Key factors influencing the viability of technologies for converting lignin to sustainable aviation fuel include lignin structure, delignification extent, depolymerization performance, and the development of stable and tunable deoxygenation catalysts.

09 BIOMASS FUELS↗
DOE OSTI2025

Genetically engineered poplar wood effectively enhances the efficiency of deep eutectic solvent-mediated one-pot processing

Although lignocellulosic biomass is a renewable resource with the potential to replace fossil-derived fuels and chemicals, its recalcitrance, largely due to lignin, limits its utilization. Recent advancements in genetic engineering have produced transgenic trees with reduced lignin content and/or modified lignin structure without compromising growth traits. Here, three engineered poplar varieties are evaluated as feedstocks using a biocompatible one-pot deep eutectic solvent-mediated process that integrates biomass fractionation and enzymatic saccharification within a single reactor, eliminating water washing and reconditioning. All transgenic poplars exhibit higher fermentable sugar yields than wild-type (WT) trees. Notably, QsuB poplar, incorporating 3,4-dihydroxybenzoate in lignin, achieves the highest glucose conversion yield of 91.3% (vs. 73.0% from WT). AT5 and MdCHS3 poplars, incorporating ferulate esters and naringenin, also demonstrate improved glucose yields (86.7 and 84.7%, respectively), confirming reduced biomass recalcitrance. Additionally, residual lignins are valorized via hydrogenolysis into phenolic compounds, with comparable alkylphenol production across all lines. These findings demonstrate that the transgenic poplar lines not only serve as superior feedstocks for sugar conversion but also provide a rich resource for phenolic compound production, enhancing the operational and economic viability of integrated biorefinery processes.

biomasses↗
DOE OSTI2020

Effect of Using Regenerated Combined FAU and MOR Zeolites as Catalysts during the Pyrolysis of Kraft Lignin

The SiO 2 /Al 2 O 3 mole ratio, pore size, and acid sites are the key parameters of zeolite’s activity in lignin pyrolysis. In this study, the comparison of individual Y and M zeolites, the combined ‘Y + M’ sample after regeneration, and their effect on lignin pyrolysis were studied in five cycles (regeneration and reuse). The results were explained using Brunauer, Emmet, and Teller (BET), micropore surface area (MSA), and total acid sites (TAS) analyses. In comparison with the individual Y or M zeolite sample, the consistent higher catalytic activities of the combined ‘Y + M’ sample in repeated cycles were observed. Pyrolysis heavy oils were characterized by nuclear magnetic resonance (NMR) spectroscopy and gel permeation chromatography (GPC). The NMR analyses revealed that with increased zeolite regeneration cycles, p-hydroxy phenyl and methoxyl groups increased. Decreases in guaiacyl phenolic hydroxyl were less for the combined ‘Y + M’ sample than the individual Y and M zeolites. Lower weight average (M w ) of heavy oil for the combined ‘Y + M’ sample indicated the enhanced cleavage of lignin structures in pyrolysis. These results support the higher catalytic activity of regenerated zeolites for the combined ‘Y + M’ sample compared with individual Y and M zeolites due to the improved MSA and TAS.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Advances in ionic liquid recycling for lignocellulosic biomass pretreatment

Ionic liquids (ILs) are promising solvents for the pretreatment of lignocellulosic biomass due to their ability to disrupt cellulose, hemicellulose, and lignin structures. However, large-scale implementation requires the development of efficient recovery and recycling methods. This review provides a comprehensive analysis of the recyclability potential of ILs used in biomass pretreatment, emphasizing their mechanisms, recent innovations, and ongoing challenges. We begin by discussing the structural diversity and tunability of ILs, which underlie their effectiveness in biomass deconstruction. The distinct roles of IL anions and cations in dissolving specific biomass components are systematically presented and compared. Advances in IL recycling techniques, including antisolvent precipitation methods, membrane separation, and distillation, are critically examined, with attention to how mechanistic insights can inform the design of more efficient and selective recovery strategies. Despite progress, significant challenges remain to scaling up IL-based biomass processing, including high cost, environmental concerns, and impact of biomass-derived impurities (e.g., lignin residues, sugars, proteins) on IL purity and functionality after reuse. We also review the applicability of different ILs based on life cycle assessments and techno-economic analyses. Lastly, we identify critical research gaps and propose future directions, including the design and development of next-generation ILs with improved recyclability, reduced toxicity, and enhanced economic viability for industrial-scale applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Influence of chain length in protic ionic liquids on physicochemical and structural features of lignins from sugarcane bagasse

We report the mechanisms behind lignin dissolution with protic ionic liquids (PILs) and their influence over lignin properties remain not fully explored. In this work, physicochemical and structural features of lignins extracted from sugarcane bagasse after pretreatment with a series of PILs (length of the cation chain combined with different anions) were assessed using analytical techniques. It was found that the lignin extracted with shorter chain length cations PILs showed the highest β-O-4 content. Opposite, the increase of the PILs cation chain length resulted in enhanced depolymerization. All lignins presented high polydispersity (>3.7), while the weight average molecular ranged from 1921 to 13,539 g/mol. The recovered [Eti][Mal] lignin presented the higher β-O-4 content and was possibly the most preserved lignin obtained. Opposite, lignin isolated from [Hex][Ac] and [Hex][For] treatments had less β-O-4 linkages attributed to the depolymerization of lignin via rupture of ether linkages generating intermediates that further repolymerized and/or depolymerized. These results suggest that the ionicity of the PIL is a crucial factor for lignin dissolution. Furthermore, these results illustrate that the proposed pretreatment using different PILs is useful to obtain high-quality lignins with distinct features and opens a new perspective for materials to match various applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhancing the multi-functional properties of renewable lignin carbon fibers via defining the structure–property relationship using different biomass feedstocks

Lignin has been explored extensively as a renewable precursor for carbon materials, considering its abundance as a major component of plant cell walls and its sustainability as a byproduct of both lignocellulosic biorefinery and the paper-making industry. Despite the extensive efforts to define the process–property relationship, it remains largely unknown how lignin biosynthesis and its chemistry would impact the resultant carbon fiber properties, for both mechanical and electroconductive performances. Such inadequate understanding fundamentally limits feedstock design and selection to improve carbon fiber properties toward broader commercial applications. Using lignin from a broad range of biomass feedstocks for carbon fiber manufacturing, we have fundamentally explored the structure–function relationship between lignin chemistry and carbon fiber performance. Specifically, lignin extracted from hardwood (sugar maple), softwood (loblolly pine and red cedar), and herbaceous plants (corn stover and switchgrass) was used for carbon fiber manufacturing, considering the very different lignin structures from these feedstocks. Linear regression models were established to define the relationship between carbon fiber mechanical properties and lignin structural characteristics. The results highlighted that the content of β-O-4 linkages correlates significantly with the tensile strength and elastic modulus of lignin carbon fibers, indicating that more linear β-O-4 linkages would promote the carbon fiber mechanical performance. Moreover, electroconductive properties are essential for broader energy device application of lignin-based carbon fibers, yet the mechanisms controlling their electroconductivity are largely unknown. Furthermore, we hereby demonstrated that a higher β-O-4 content also promotes the electroconductivity of lignin carbon fibers. Microstructure analysis further revealed that the crystallite size and content of the pre-graphitic turbostratic carbon structure in lignin-based carbon fibers were enhanced as the β-O-4 linkages increased. The content of β-O-4 linkages has shown a strong correlation with the crystallite content in a linear regression model. This study thus revealed the underlying mechanisms regarding how the lignin structure in planta defines the resultant carbon fiber properties. Moreover, the study also highlighted the correlation between the mechanical and electroconductive properties of lignin-based carbon fibers, both of which were defined by the lignin structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Polyurethanes Based on Unmodified and Refined Technical Lignins: Correlation between Molecular Structure and Material Properties

The structural complexity and robust intermolecular interactions have challenged the incorporation of technical lignin into value-added polymeric materials for decades. To study the correlation between lignin molecular structure and material properties of lignin-based polyurethanes, we applied co-solvent enhanced lignocellulosic fractionation pretreatment followed by sequential precipitation to produce three distinct lignin preparations with narrowly distributed (molecular weight dispersity <2) and comparatively low molecular weight (<1500 g/mol) from poplar biomass. Structural characterization indicated that these lignin preparations differed in average molecular chain length and stiffness as well as hydroxyl group distribution. Secondary hydroxyl group providers such as aliphatic diols and polyethers were incorporated as building blocks into the lignin-based polyurethanes to provide additional hydrogen capacity to improve the dispersion of lignin in the polyurethane network. The selected aliphatic diols and polyethers interacted with lignin molecules at different levels of strength depending on their molecular structure, and their impacts were ultimately reflected in the mechanical and thermal properties of the resulting lignin-based polyurethanes. The copolymerization of technical lignin with tailored structure and secondary hydroxyl providers could provide new strategies in formulating lignin-based/containing polyurethanes for various functional applications.

36 MATERIALS SCIENCE↗