SEARCH · Search NASA

Results for “low and peak flows”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS1972

Performance of a bicone inlet designed for Mach 2.5 with internal distributed compression and 40 percent internal contraction

The inlet was designed to have the minimum internal contraction consistent with high total-pressure recovery and low cowl drag. Without a bypass system, the peak pressure recoveries increased from 0.890 to 0.936 when the supercritical bleed mass flow ratio was varied from 0.035 to 0.060. With an operating bypass system and installed centerbody vortex generators, a slight increase in peak pressure recovery was obtained. The values of steady-state distortion and dynamic distortion were below 0.10 and 0.02, respectively, near critical operation. Simulation of a turbofan engine with concentric pipes showed no effect on compressor face flow profiles with varying bypass flow ratio.

Wasserbauer, J. F.↗

NASA NTRSDate not supplied

Numerical Analysis of Cavitation-Induced Two-Phase Fluid Transients in Cryogenic Feedlines Using Finite Volume Procedure

This article presents a numerical investigation of the cavitation induced fluid transient in cryogenic feedline due to sudden closure of the valve A one dimensional numerical model based on finite volume procedure consisting of nodes and branches using Generalized Fluid System Simulation Program ( has been employed for the prediction of pressure variations The unsteady friction formulation accurately determines wall shear stress, and a homogeneous mixture model is used for two phase flow modeling Numerical results obtained with the present formulation are compared with experimental results and Method of Characteristic ( based results It is observed that low residual in flow variable calculation improves the solution providing numerically stable results GFSSP is able to reproduce the fluid transient peak due to vapor collapse Subsequently, it can retain the shape of pressure wave for two phase fluid transients, but it is dampening faster compared to experiments Further investigation is required with set of experiments to validate the present numerical approach for different experimental data.

Fluid Transient↗

NASA NTRS1974

Performance of a 1.15-pressure-ratio axial-flow fan stage with a blade tip solidity of 0.5

The overall and blade-element performance of a low-solidity, low-pressure-ratio, low-tip-speed fan stage is presented over the stable operating range at rotative speeds from 90 to 120 percent of design speed. At design speed a stage peak efficiency of 0.836 was obtained at a weight flow of 30.27 kilograms per second and a pressure ratio of 1.111. The pressure ratio was less than design pressure ratio, and the design energy input into the rotor was not achieved. A mismatch of the rotor and stator blade elements resulted due to the lower than design pressure ratio of the rotor.

Osborn, W. M.↗

DOE OSTI2022

Developing reactors for electrifying bio-methanation: a perspective from bio-electrochemistry

The integration of microbial synthesis with renewable electricity is an emerging route for both CO 2 utilization and seasonal energy storage in the form of stored bio-electrofuels. The major benefits of electrifying bioreactors include: using highly selective bio-catalysts for CO 2 conversion under mild reaction conditions; decoupling the production of more facile electrochemical intermediates, such as hydrogen, at the electrode from the production of bio-catalyzed multi-electron and/or carbon products, such as methane or acetate; using microbes as robust and self-regenerating catalysts enabling higher efficiency and durability in CO 2 conversion systems compared to inorganic catalysis. In this Perspective, we propose research aimed at developing electro-bioreactor components that will increase the productivity of the reactor while maintaining high energy efficiency and biocompatible reaction conditions to fully realize the benefits of electrified bioreactors. Furthermore, these developments include: flow reactors with tailored 3D electrodes to optimally use the reactor volume, electrocatalysts designed for peak performance in neutral pH electrolytes, high conductivity microbial media, and new membrane separator materials with high ion conductivity and low gas permeability. Production of methane via a hybrid electrical-biological approach is taken as a case study to motivate these developments. Finally, an iterative design–manufacture–test cycle, enabled by additive manufacturing and 3D printing technologies, is proposed to rapidly prototype components prior to large-scale manufacturing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

NASA NTRS1981

ISEE 1 observations of thermal plasma in the vicinity of the plasmasphere during periods of quieting magnetic activity

An investigation of thermal plasma behavior in the vicinity of the plasmasphere during periods of quieting magnetic activity was conducted by combining thermal ion observations made with the plasma composition experiment on ISEE 1 with plasma density profiles obtained from plasma frequency measurements made with the same satellite's plasma wave experiment. During periods in which the magnetic activity quiets, the two regions characterized by H(+):He(+):O(+) (isotropic) and H(+):O(+):He(+) (field-aligned) ion species distributions (in order of dominance) are separated by a new region in which low-energy H(+) and He(+) are found flowing along the magnetic field lines. At other times, following quieting magnetic activity, distributions having peak fluxes at 90 deg pitch angle are observed in this region.

Horwitz, J. L.↗

DOE OSTI2021

Quantification of Deformation-Induced Concentration Fluctuations in Polymeric Liquids by Small-Angle Neutron Scattering

This study demonstrates how the large concentration fluctuations of polymeric liquids under deformation and flow can be quantitatively studied by applying the spherical harmonic expansion technique to small-angle neutron scattering. Using a series of binary polymer blends, it is shown that the emergence of the so-called butterfly patterns is caused by the change of sign in the leading anisotropic component of the small-angle spectrum, when the scattering is dominated by intermolecular correlation associated with flow-induced demixing. The increasing spatial fluctuations of concentration are evidenced by the enhancement of the isotropic component of the scattering spectrum in the zero-angle limit and peak shift of the leading anisotropic coefficients toward low Q. Additionally, the spherical harmonic expansion framework permits real-space analysis of anisotropic scattering length density correlation in a convenient form. The methodology described in this work provides a concrete venue for quantitative studies of phase behavior of fluids under deformation and flow via small-angle scattering techniques, where mainly qualitative approaches were previously employed.

Chemical structure↗

NASA NTRS1993

Boundary-layer transition extent measurements on a cone and flat plate at Mach 3.5

Wide excursions of the boundary-layer transition region are expected to occur on the X-30 National Aerospace Plane (NASP) due to the high Mach number, high temperature, and low density environment experienced during flight. Undesirable features of the transition region, such as the peak heat transfer rate, make it important to understand transition region physics. The current study investigates transition extent in 2D and axisymmetric bounday-layer flows. Surface-pitot and recovery temperature data obtained on a cone and flat plate at Mach 3.5 in the Supersonic Low-Disturbance Pilot Tunnel at NASA Langley are presented. Results show the effects of the unit Reynolds number, freestream disturbances, and nose/leading-edge bluntness on the extent of transition.

Chen, Fang-Jenq↗

NASA NTRS1975

Utilization of LANDSAT monitoring capabilities for snowcover depletion analysis

LANDSAT images for three snowmelt seasons were utilized to map and analyze snowcover depletion on a small river basin in southeastern Wyoming. Results indicate that snowcover-runoff curves established from repetitive LANDSAT coverage may be used in conjunction with streamflow data to provide low-cost seasonal runoff forecasts having a high degree of accuracy. Additionally, detectable variations within a snowpack might provide temporal estimates of peak flows.

Thompson, A. G.↗

DOE OSTI2021

Modelling Nuclear Thermal Propulsion Reactor Startup Transients

The National Aeronautics and Space Administration (NASA) has set the goal of a manned mission to Mars by the year 2030 [1] and charged the national academy of sci- ences "to identify primary technical and programmatic chal- lenges, merits, and risks for maturing space nuclear propulsion technologies of interest to a future human Mars exploration mission" [2]. One relevant technology, nuclear thermal propul- sion (NTP), has notable advantages over traditional chemical rockets; most important among them is the ability to produce larger specific impulse on the order of 900s. The reduction of mission time is crucial for a manned mission to Mars to reduce the risk for the crew. Due to its higher specific impulse, NTP satisfies this need and is pursued as one technology to get humans to Mars [3, 4]. The construction of an NTP sys- tem has to negotiate several challenges laid out in Ref. [2]; one of these challenges is the need to startup the NTP sys- tem from essentially cold conditions to full power within one minute. This paper focuses on studying the neutronics and thermal-hydraulics behavior of a simplified NTP model dur- ing prescribed reactivity insertions and mass flow rate (MFR) ramps. It is the goal of this paper to investigate startup, peak material temperatures, and average specific impulse for a low enriched Uranium (LEU), ceramic and metal material (CER- MET) NTP system when varying reactivity insertion and MFR ramps.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2022

Advantages of a variable‐resolution global climate model in reproducing the seasonal evolution of East Asian summer monsoon

Abstract The East Asian summer monsoon (EASM) is unique among monsoon systems that it features meridional evolution of the summer monsoon. In this study, we evaluate the performances of a Variable‐Resolution Community Earth System Model (VR‐CESM) regionally refined over eastern China (14 km) in reproducing the seasonal evolution of EASM precipitation over China. Compared with reference datasets, VR‐CESM shows better performance than the corresponding globally uniform coarse‐resolution model CESM (quasi‐uniform 1°), especially over western China where complex local topography exists. The northward monsoon migration is closely related to low‐level southerly flows and vertical moisture advection, which are more reasonably simulated in VR‐CESM. The four critical timings of the EASM (monsoon onset, withdrawal, peak, and duration) are also better captured in VR‐CESM than in CESM. The corresponding spatial Pearson correlation coefficients of the four critical timings with respect to reference datasets are about 0.1 higher in VR‐CESM than those in CESM. Both models are most accurate in simulating monsoon onset and least accurate at simulating the monsoon peak. The overestimated zonal thermal contrast in CESM is responsible for the earlier monsoon onset and excessive precipitation in September over the Yangtze River valley. Finer resolution in VR‐CESM, especially over the Tibetan Plateau (TP), appears to be a main factor in simulating better zonal thermal contrast and seasonal evolution of the EASM.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1994

Shock interactions with magnetized interstellar clouds. 1: Steady shocks hitting nonradiative clouds

We study the interaction of a steady, planar shock with a nonradiative, spherical, interstellar cloud threaded by a uniform magnetic field. For strong shocks, the sonic Mach number scales out, so two parameters determine the evolution: the ratio of cloud to intercloud density, and the Alfven Mach number. We focus on the case with initial field parallel to the shock velocity, though we also present one model with field perpendicular to the velocity. Even with 100 zones per cloud radius, we find that the magnetic field structure converges only at early times. However, we can draw three conclusions from our work. First, our results suggest that the inclusion of a field in equipartition with the preshock medium can prevent the complete destruction of the cloud found in the field-free case recently considered by Klein, McKee, & Colella. Second, the interaction of the shock with the cloud can amplify the magnetic field in some regions up to equipartition with the post-shock thermal pressure. In the parallel-field case, the shock preferentially amplifies the parallel component of the field, creating a 'flux rope,' a linear structure of concentrated magnetic field. The flux rope dominates the volume of amplified field, so that laminar, rather than turbulent, amplification is dominant in this case. Third, the presence of the cloud enhances the production of X-ray and synchrotron emission. The X-ray emission peaks early, during the initial passage of the shock over the cloud, while the synchrotron emission peaks later, when the flow sweeps magnetic field onto the axis between the cloud and the main shock.

Low, Mordecai-Mark Mac↗

NASA NTRS1999

The value of assessing pulmonary venous flow velocity for predicting severity of mitral regurgitation: A quantitative assessment integrating left ventricular function

Although alteration in pulmonary venous flow has been reported to relate to mitral regurgitant severity, it is also known to vary with left ventricular (LV) systolic and diastolic dysfunction. There are few data relating pulmonary venous flow to quantitative indexes of mitral regurgitation (MR). The object of this study was to assess quantitatively the accuracy of pulmonary venous flow for predicting MR severity by using transesophageal echocardiographic measurement in patients with variable LV dysfunction. This study consisted of 73 patients undergoing heart surgery with mild to severe MR. Regurgitant orifice area (ROA), regurgitant stroke volume (RSV), and regurgitant fraction (RF) were obtained by quantitative transesophageal echocardiography and proximal isovelocity surface area. Both left and right upper pulmonary venous flow velocities were recorded and their patterns classified by the ratio of systolic to diastolic velocity: normal (>/=1), blunted (<1), and systolic reversal (<0). Twenty-three percent of patients had discordant patterns between the left and right veins. When the most abnormal patterns either in the left or right vein were used for analysis, the ratio of peak systolic to diastolic flow velocity was negatively correlated with ROA (r = -0.74, P <.001), RSV (r = -0.70, P <.001), and RF (r = -0.66, P <.001) calculated by the Doppler thermodilution method; values were r = -0.70, r = -0.67, and r = -0.57, respectively (all P <.001), for indexes calculated by the proximal isovelocity surface area method. The sensitivity, specificity, and predictive values of the reversed pulmonary venous flow pattern for detecting a large ROA (>0.3 cm(2)) were 69%, 98%, and 97%, respectively. The sensitivity, specificity, and predictive values of the normal pulmonary venous flow pattern for detecting a small ROA (<0.3 cm(2)) were 60%, 96%, and 94%, respectively. However, the blunted pattern had low sensitivity (22%), specificity (61%), and predictive values (30%) for detecting ROA of greater than 0.3 cm(2) with significant overlap with the reversed and normal patterns. Among patients with the blunted pattern, the correlation between the systolic to diastolic velocity ratio was worse in those with LV dysfunction (ejection fraction <50%, r = 0.23, P >.05) than in those with normal LV function (r = -0.57, P <.05). Stepwise linear regression analysis showed that the peak systolic to diastolic velocity ratio was independently correlated with RF (P <.001) and effective stroke volume (P <.01), with a multiple correlation coefficient of 0.71 (P <.001). In conclusion, reversed pulmonary venous flow in systole is a highly specific and reliable marker of moderately severe or severe MR with an ROA greater than 0.3 cm(2), whereas the normal pattern accurately predicts mild to moderate MR. Blunted pulmonary venous flow can be seen in all grades of MR with low predictive value for severity of MR, especially in the presence of LV dysfunction. The blunted pulmonary venous flow pattern must therefore be interpreted cautiously in clinical practice as a marker for severity of MR.

Non-NASA Center↗

DOE OSTI2020

Play Fairway Analysis: Structurally Controlled Geothermal Systems in the Eastern Great Basin Extensional Regime, Utah

A research team with membership from the University of Utah/Energy & Geoscience Institute, the University of Utah/Dept. of Geology & Geophysics, and the Utah Geological Survey, undertook a play fairway analysis (PFA) for geothermal resources in the Eastern Great Basin (EGB) extensional tectonic regime of western Utah. This is a high-priority region for geothermal exploration because active Basin and Range (B&R) extension with volcanism having a N-S strike is superimposed upon pre-existing E-W belts of plutonic rocks and large-scale structural lineaments. Cumulative heat flow along the N-S strike of the state totals approximately 5 GWt above background stable interior. Three electricity producing power plants currently exist with substantial potential for increase. Succinctly, our PFA approach aims to resolve potential sources of heat and permeability in the region, which are the two principal criteria for establishing a geothermal resource. An initial Phase 1 was carried out using only existing geoscientific data in the area. Criteria selected for focusing heat potential include direct heat flow measurements in boreholes, magnetotelluric (MT) low resistivity anomalies, fluid/gas geochemistry, and proximity to recent volcanic eruptions. Permeability is established through geological structures (fault density, critically stressed areas, seismicity, gravity), and MT low resistivity anomalies. In Phase II of this PFA project, additional geological, geophysical and geochemical data were acquired and analysis carried out primarily over promising composite common risk (CCR) areas initially identified in Phase I in order to focus prospectivity and prepare for drilling recommendations. These prospects are near the Twin Peaks rhyolite field, high heat flow areas north of the producing Cove Fort system, and geophysical structure beneath the Crater Knoll area off the northeast flank of the Mineral Mountains. Additional data included MT site fill-in, structural mapping and analysis using high-resolution imagery, gravity and on-ground mapping, Nodal 3C passive seismic collection, and passive 3He surveying. Heat source and permeability potential are again expressed in terms of their individual common risk segment (CRS) maps, with a color scheme using green for most favorable (low risk) and red for least favorable (high risk). Diverse data types are united through the technique of probability kriging, which establishes prospectivity thresholds for each data type and then computes probability of exceeding that threshold over the PFA area. Modified CRS and CCRS maps are compared to those of Phase I to highlight tighter prospectivity focus. In doing so, the prospectivity threshold for heat was increased significantly to narrow the targeting. In the final Phase III of this project where a recommended deep thermal gradient hole was sited, additional geophysical, geochemical and geological field collection and analysis was carried out to refine drill hole targeting. This includes prospect-scale MT, gravity, structure, passive seismic deployment (Cove Fort area), and detailed 3He isotope profiling. It was the recommendation of the DOE Technical Monitoring Team (TMT) that one or more holes be sited in the north-ern Cove Fort area where legacy TG gradient holes showed high cumulative heat flow. These were to be of moderate depth, 2000-3000 feet, to reach the geothermal fluid table expected to start in excess of 1000 feet depth. The drilling organization stipulated by the DOE/GTO was that of the USGS Research Drilling Program (RDP) centered in Las Vegas, NV. A detailed well plan, appended to this report, was developed principally by Dr. Ben Barker consulting to University of Utah, Dr. Steve Pye on the DOE TMT, Mr. Steven Crawford of the USGS-RDP, and the project PI Phil Wannamaker. However, temperature and possible H 2 S at the systems lead to cancellation of the drilling last-minute as this appeared outside the experience base of the USGS-RDP. We hope to have the opportunity to revisit the test drilling and expand the Play Fairway Analysis of this region at some point in the future.

15 GEOTHERMAL ENERGY↗

DOE OSTI2020

Automotive fuel cell stack and system efficiency and fuel consumption based on vehicle testing on a chassis dynamometer at minus 18 °C to positive 35 °C temperatures

In this work we present an in-depth laboratory technology assessment of a 2016 Toyota Mirai Fuel Cell (FC) vehicle based on chassis dynamometer testing. The 114.6 kW FC stack has a high dynamic response, which makes this powertrain a FC-dominant hybrid electric vehicle. The measured peak efficiency is 66.0% FC stack and 63.7% FC system with an idle hydrogen flow rate of 4.39 g/hr. The high FC system efficiencies at low loads match typical vehicle power spectrums, resulting in a high average vehicle efficiency of 62% compared to 45% and 23% for a hybrid electric vehicle and a conventional vehicle, respectively. An energy breakdown accounts for the FC stack losses, FC system losses, air compressor loads, and heater loads for different drive cycles and different thermal conditions. The cold-start North American city drive cycle (UDDS) energy consumption values are, respectively, 758, 581, 226, and 321 Wh/km at ambient conditions of -18 degrees C, -7 degrees C, -25 degrees C and 35 degrees C with 850 W/m 2 of solar loading. The FC system shutdown and startup processes at temperatures below the freezing point contribute to the increased hydrogen consumption. Additionally, the raw test data files are available for download, thus providing the research community with a public reference data on a modern production automotive FC system.

08 HYDROGEN↗

NASA NTRS2012

Jet Noise Reduction Potential from Emerging Variable Cycle Technologies

Acoustic and flow-field experiments were conducted on exhaust concepts for the next generation supersonic, commercial aircraft. The concepts were developed by Lockheed Martin (LM), Rolls-Royce Liberty Works (RRLW), and General Electric Global Research (GEGR) as part of an N+2 (next generation forward) aircraft system study initiated by the Supersonics Project in NASA s Fundamental Aeronautics Program. The experiments were conducted in the Aero-Acoustic Propulsion Laboratory at the NASA Glenn Research Center. The exhaust concepts utilized ejectors, inverted velocity profiles, and fluidic shields. One of the ejector concepts was found to produce stagnant flow within the ejector and the other ejector concept produced discrete-frequency tones that degraded the acoustic performance of the model. The concept incorporating an inverted velocity profile and fluid shield produced overall-sound-pressure-level reductions of 6 dB relative to a single stream nozzle at the peak jet noise angle for some nozzle pressure ratios. Flow separations in the nozzle degraded the acoustic performance of the inverted velocity profile model at low nozzle pressure ratios.

Henderson, Brenda↗

NASA NTRS2012

Jet Noise Reduction Potential From Emerging Variable Cycle Technologies

Source record↗

NASA NTRS1991

Magnetic field studies of the solar wind interaction with Venus from the Galileo flyby

During the February 10, 1990 flyby of Venus, the Galileo spacecraft skimmed the downnstream flank of the planetary bow shock. This provided an opportunity to examine both the global and the local structure of the shock in an interval during which conditions in the solar wind plasma were quite steady. The data show that the cross section of the shock in planes transverse to the flow is smaller in directions aligned with the projection of the interplanetary magnetic field than in directions not so aligned. Ultralow-frequency waves were present in the unshocked solar wind, and their amplitude peaked when the spacecraft was downstream of the foreshock. At large distances down the tail, the Mach number of the flow normal to the shock is low, thus providing the opportunity to study repeated crossings of the collisionless shock in an interesting parameter regime. Some of the shock crossings reveal structure that comes close to the theoretically predicted form of intermediate shocks, whose existence in collisionless plasmas has not been confirmed.

Kivelson, M. G.↗

DOE OSTI2022

East Asian Rainbands and Associated Circulation over the Tibetan Plateau Region

Abstract Rainbands that migrate northward from spring to summer are persistent features of the East Asian summer monsoon. This study employs a machine learning algorithm to identify individual East Asian rainbands from May to August in the 6-hourly ERA-Interim reanalysis product and captures rainband events during these months for the period 1979–2018. The median duration of rainband events at any location in East Asia is 12 h, and the centroids of these rainbands move northward continuously from approximately 28°N in late May to approximately 33°N in July, instead of making jumps between quasi-stationary periods. Whereas the length and overall area of the rainbands grow monotonically from May to June, the intensity of the rainfall within the rainband dips slightly in early June before it peaks in late June. We find that extratropical northerly winds on all pressure levels over East China are the most important anomalous flow accompanying the rainband events. The anomalous northerlies augment climatological background northerlies in bringing low moist static energy air and thus generate the front associated with the rainband. Persistent lower-tropospheric southerly winds bring in moisture that feeds the rainband and are enhanced a few days prior to rainband events, but they are not directly tied to the actual rainband formation. The background northerlies could originate as part of the Rossby waves resulting from the jet stream interaction with the Tibetan Plateau. The ageostrophic circulation in the jet entrance region peaks in May and weakens in June and July and does not prove to be critical to the formation of the rainbands.

54 ENVIRONMENTAL SCIENCES↗