Search NASA⌕ Search

SEARCH · Search NASA

Results for “low-thrust orbit transfer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

High and low thrust mission analysis for a Mars exploration program

The purpose of the study is to identify limits, trends, and sensitivities of Mars Transportation System performance over several Mars mission opportunities. Two Mars Transfer Vehicle (MTV) configurations utilizing different propulsion systems (Chemical/Aerobrake and NEP - Nuclear Electric Propulsion) are outlined. The trades involved in comparing two MTS candidate designs are assessed. Mission analysis for mission opportunities beginning in around 2010 and continuing past 2030 is performed, and a Mars mission model is covered, along with orbit selection and NEP and Chemical/Aerobrake performance. The results of several sensitivity studies are given in order to allow for contingency planning in design and performance. It is concluded that the low-thrust system perform best, its vehicle mass is lower and its trip times are more stable.

Shepard, Kyle M.↗
NASA NTRS1984

Evaluation of propellant tank insulation concepts for low-thrust chemical propulsion systems

An analytical evaluation of cryogenic propellant tank insulations for liquid oxygen/liquid hydrogen low-thrust 2224N (500 lbf) propulsion systems (LTPS) was conducted. The insulation studied consisted of combinations of N2-purged foam and multilayer insulation (MLI) as well as He-purged MLI-only. Heat leak and payload performance predictions were made for three Shuttle-launched LTPS designed for Shuttle bay packaged payload densities of 56 kg/cu m, 40 kg/cu m and 24 kg/cu m. Foam/MLI insulations were found to increase LTPS payload delivery capability when compared with He-purged MLI-only. An additional benefit of foam/MLI was reduced operational complexity because Orbiter cargo bay N2 purge gas could be used for MLI purging. Maximum payload mass benefit occurred when an enhanced convection, rather than natural convection, heat transfer was specified for the insulation purge enclosure. The enhanced convection environment allowed minimum insulation thickness to be used for the foam/MLI interface temperature selected to correspond to the moisture dew point in the N2 purge gas. Experimental verification of foam/MLI benefits was recommended. A conservative program cost estimate for testing a MLI-foam insulated tank was 2.1 million dollars. It was noted this cost could be reduced significantly without increasing program risk.

Kramer, T.↗
NASA NTRS1984

Evaluation of propellent tank insulation concepts for low-thrust chemical propulsion systems: Executive summary

Cryogenic propellant tank insulations or liquid oxygen/liquid hydrogen low-thrust 2224N (500 lbf) propulsion systems (LTPS) were assessed. The insulation studied consisted of combinations of N2-purged foam and multilayer insulation (MLI) as well as He-purged MLI-only. Heat leak and payload performance predictions were made for three shuttle-launched LTPS designed for shuttle bay packaged payload densities of 56 kg cu/m (3.5 lbm/cu ft), 40 kg/cu m (2.5 lbm/cu ft) and 24 kg/cu m (1.5 lbm/cu ft). Foam/MLI insulations were found to increase LTPS payload delivery capability when compared with He-purged MLI-only. An additional benefit of foam/MLI was reduced operational complexity because orbiter cargo bay N2 purge gas could be used for MLI purging. Maximum payload mass benefit occurred when an enhanced convection, rather than natural convection, heat transfer was specified for the insulation purge enclosure. The enhanced convection environment allowed minimum insulation thickness to be used for the foam/MLI interface temperature selected to correspond to the moisture dew point in the N2 purge gas. Experimental verification of foam/MLI benefits was recommended. A conservative program cost estimate for testing a MLI-foam insulated tank was 2.1 million dollars. This cost could be reduced significantly without increasing program risk.

Kramer, T.↗
NASA NTRS1974

A users manual for a computer program which calculates time optical geocentric transfers using solar or nuclear electric and high thrust propulsion

This manual is a guide for using a computer program which calculates time optimal trajectories for high-and low-thrust geocentric transfers. Either SEP or NEP may be assumed and a one or two impulse, fixed total delta V, initial high thrust phase may be included. Also a single impulse of specified delta V may be included after the low thrust state. The low thrust phase utilizes equinoctial orbital elements to avoid the classical singularities and Kryloff-Boguliuboff averaging to help insure more rapid computation time. The program is written in FORTRAN 4 in double precision for use on an IBM 360 computer. The manual includes a description of the problem treated, input/output information, examples of runs, and source code listings.

Sackett, L. L.↗
NASA NTRS1980

Low-thrust vehicles concept studies

Low thrust chemical (hydrogen-oxygen) propulsion systems configured specifically for low acceleration orbit transfer of large space systems were studied in order to provide the required additional data to better compare new, low thrust chemical propulsion systems with other propulsion approaches such as advanced electric systems. Study results indicate that it is cost-effective and least risk to combine the low thrust OTV and stowed spacecraft in a single 65 K shuttle. Mission analysis indicates that there are 25 such missions, starting in 1987. Multiple shuttles (LSS in one, OTV in another) result in a 20% increase in LSS (SBR) diameter over single shuttle launches. Synthesis and optimization of the LSS characteristics and OTV capability resulted in determination of the optimum thrust-to-weight and thrust level. For the space based radar with radial truss arms (center thrust application), the optimum thrust-to-weight (maximum) is 0.1, giving a thrust of 2000 lb. For the annular truss (edge-on thrust application) the structure is not as sensitive, and thrust of 1000 lb appears optimum. For the geoplatform, optimum T/W is .15 (3000 lb thrust). The effects of LSS structure material, weight distribution, and unit area density were evaluated, as were the OTV engine thrust transient and number of burns.

Ketchum, W. J.↗
NASA NTRS1980

Low-thrust chemical rocket engine study

Parametric data and preliminary designs on liquid rocket engines for low thrust cargo orbit-transfer-vehicles are described and those items where technology is required to enhance the designs are identified. The results of film cooling studies to establish the upper chamber pressure limit are given. The study showed that regen cooling with RP-1 was not feasible over the entire thrust and chamber pressure ranges. The thermal data showed that the RP-1 bulk temperature exceeded the study coking temperature limit of 1010 R. Based upon the results presented, O2/H2 and O2/CH4 regen engine systems and O2/H2 film cooled engines were selected for further study in the system analysis. Six engine design concepts are examined.

Mellish, J. A.↗
NASA NTRS1981

Low-thrust chemical rocket engine study

An analytical study evaluating thrust chamber cooling engine cycles and preliminary engine design for low thrust chemical rocket engines for orbit transfer vehicles is described. Oxygen/hydrogen, oxygen/methane, and oxygen/RP-1 engines with thrust levels from 444.8 N to 13345 N, and chamber pressures from 13.8 N/sq cm to 689.5 N/sq cm were evaluated. The physical and thermodynamic properties of the propellant theoretical performance data, and transport properties are documented. The thrust chamber cooling limits for regenerative/radiation and film/radiation cooling are defined and parametric heat transfer data presented. A conceptual evaluation of a number of engine cycles was performed and a 2224.1 N oxygen/hydrogen engine cycle configuration and a 2224.1 N oxygen/methane configuration chosen for preliminary engine design. Updated parametric engine data, engine design drawings, and an assessment of technology required are presented.

Shoji, J. M.↗
NASA NTRS1981

Low-thrust chemical propulsion system pump technology

Candidate pump and driver systems for low thrust cargo orbit transfer vehicle engines which deliver large space structures to geosynchronous equatorial orbit and beyond are evaluated. The pumps operate to 68 atmospheres (1000 psi) discharge pressure and flowrates suited to cryogenic engines using either LOX/methane or LOX/hydrogen propellants in thrust ranges from 445 to 8900 N (100 to 2000 lb F). Analysis of the various pumps and drivers indicate that the low specific speed requirement will make high fluid efficiencies difficult to achieve. As such, multiple stages are required. In addition, all pumps require inducer stages. The most attractive main pumps are the multistage centrifugal pumps.

Sabiers, R. L.↗
NASA NTRS1985

Laser propulsion for the orbital transfer mission

America's space activities in the 1990s and beyond will partly consist of missions involving the transportation of cargo from low earth orbit (LEO) to higher orbits or to an escape trajectory. Such missions are to be performed with the aid of an orbit transfer vehicle (OTV). The operation of the OTV can be based on different propulsion concepts. A chemical OTV is characterized by a high thrust and low specific impulse. The result is a short trip time at the cost of large quantities of propellant. On the other hand, low-thrust systems such as electric propulsion units, consume very little propellant, but would have a long trip time. The present paper is concerned with a compromise between these two extremes. The employed propulsion system utilizes laser thermal propulsion, in which a ground or space-based laser is used to beam energy to a thruster on the OTV. The laser light is absorbed by a propellant. The resulting heating of the propellant causes an expansion of the propellant through a nozzle to produce thrust. Details regarding this propulsion concept are discussed, taking into account operational questions and missions.

Frisbee, R. H.↗
NASA NTRS1988

Automated low-thrust guidance for the orbital maneuvering vehicle

This paper describes the highly autonomous OMV Guidance Navigation and Control system. Emphasis is placed on a key feature of the design, the low thrust guidance algorithm. The two guidance modes, orbit change guidance and rendezvous guidance, are discussed in detail. It is shown how OMV will automatically transfer from its initial orbit to an arbitrary target orbit and reach a specified rendezvous position relative to the target vehicle.

Rose, Richard E.↗
NASA NTRS2006

Jupiter icy moons orbiteer mission design overview

An overview of the design of a mission to three large moons of Jupiter is presented. the Jupiter Icy Moons Orbiter (JIMO) mission uses ion thrusters powered by a nuclear reactor to transfer from Earth to Jupiter and enter a low-altitude science orbit around each of the moons.

mission design↗
NASA NTRS2006

Jupiter Icy Moons Orbiter Mission design overview

An overview of the design of a possible mission to three large moons of Jupiter (Callisto, Ganymede, and Europa) is presented. The potential Jupiter Icy Moons Orbiter (JIMO) mission uses ion thrusters powered by a nuclear reactor to transfer from Earth to Jupiter and enter a low-altitude science orbit around each of the moons. The combination of very limited control authority and significant multibody dynamics resulted in some aspects of the trajectory design being different than for any previous mission. The results of several key trades, innovative trajectory types and design processes, and remaining issues are presented.

mission design↗
NASA NTRS2005

Evolutionary Computing for Low-thrust Navigation

The development of new mission concepts requires efficient methodologies to analyze, design and simulate the concepts before implementation. New mission concepts are increasingly considering the use of ion thrusters for fuel-efficient navigation in deep space. This paper presents parallel, evolutionary computing methods to design trajectories of spacecraft propelled by ion thrusters and to assess the trade-off between delivered payload mass and required flight time. The developed methods utilize a distributed computing environment in order to speed up computation, and use evolutionary algorithms to find globally Pareto-optimal solutions. The methods are coupled with two main traditional trajectory design approaches, which are called direct and indirect. In the direct approach, thrust control is discretized in either arc time or arc length, and the resulting discrete thrust vectors are optimized. In the indirect approach, a thrust control problem is transformed into a costate control problem, and the initial values of the costate vector are optimized. The developed methods are applied to two problems: 1) an orbit transfer around the Earth and 2) a transfer between two distance retrograde orbits around Europa, the closest to Jupiter of the icy Galilean moons. The optimal solutions found with the present methods are comparable to other state-of-the-art trajectory optimizers and to analytical approximations for optimal transfers, while the required computational time is several orders of magnitude shorter than other optimizers thanks to an intelligent design of control vector discretization, advanced algorithmic parameterization, and parallel computing.

optimization↗