SEARCH · Search NASA

Results for “manufacturing rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Increasing CO 2 Capture Rate in Liquid-Solvent Direct-Air Carbon Capture via Additive Manufacturing

Carbon capture is essential to meeting climate change mitigation goals. One approach currently being commercialized utilizes liquid-based solvents to capture CO 2 directly from the atmosphere but is limited by slow absorption of CO 2 into the liquid. Improved air/solvent liquid mixing increases CO 2 absorption rate, and this increased CO 2 absorption efficiency allows for smaller carbon capture systems with lower capital costs and better economic viability. In this project, we study the use of passive micromixers fabricated by metal additive manufacturing. The micromixer’s small-scale surface geometric features perturb and mix the liquid film to enhance mass transfer and CO 2 absorption. In this project, we evaluated this hypothesis through computational and experimental studies. Computational investigations focused on developing capabilities to simulate thin film (~ 100μm) fluid flow on rough surfaces. Such thin films are in a surface-tension dominated regime and simulations in this regime are prone to instabilities. Improvements to the Nalu code completed in this project resulted in a 10x timestep stability improvement for these problems.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Tracking Flows of End-of-Life Battery Materials and Manufacturing Scrap

This paper defines terms such as “recycling rate” that enable the characterization of flows of battery materials and expands the terminology to accommodate the description of complex product recycling. It also estimates the maximum percentage of U.S. demand for critical elements that could be satisfied by recycling as demand continues to grow, and it defines and estimates the recycling rate for lithium-ion batteries. Finally, it clarifies the role of manufacturing scrap as the domestic U.S. supply chain is built up. It concludes that recycling will be important in the long term, but growth still requires that new material be extracted to supply additional material.

25 ENERGY STORAGE↗

DOE OSTI2022

Modeling of non-equilibrium partitioning in direct metal deposited copper–iron concentrated alloys

The direct metal deposition (DMD) additive manufacturing process produces high cooling rates within a small melt pool and can lead to high amounts of solute trapping. These high cooling rates limit diffusion and lead to the formation of non-equilibrium phases. In this work, we utilize a numerical model to calculate the degree of solute trapping, defined as non-equilibrium partitioning. A theoretical case with overall composition fixed to 50Cu-50Fe at.%. was performed to observe the influence of increasing solidification rates. We then simulate DMD of equimolar Cu-Fe powder printed on mild steel substrate and the calculated non-equilibrium phase compositions were consistent with experimental observations reported earlier on this alloy composition. For a single deposited track, cooling rates are high enough to yield significant solute trapping. Here, the degree of solute trapping is highest near the free surface and has a gradient that correlates with the cooling rate gradient.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Additive manufacturing of carbon fiber-reinforced thermoset composites via in-situ thermal curing

Fiber-reinforced polymer composites are lightweight structural materials widely used in the transportation and energy industries. Current approaches for the manufacture of composites require expensive tooling and long, energy-intensive processing, resulting in a high cost of manufacturing, limited design complexity, and low fabrication rates. Here, we report rapid, scalable, and energy-efficient additive manufacturing of fiber-reinforced thermoset composites, while eliminating the need for tooling or molds. Use of a thermoresponsive thermoset resin as the matrix of composites and localized, remote heating of carbon fiber reinforcements via photothermal conversion enables rapid, in-situ curing of composites without further post-processing. Rapid curing and phase transformation of the matrix thermoset, from a liquid or viscous resin to a rigid polymer, immediately upon deposition by a robotic platform, allows for the high-fidelity, freeform manufacturing of discontinuous and continuous fiber-reinforced composites without using sacrificial support materials. This method is applicable to a variety of industries and will enable rapid and scalable manufacture of composite parts and tooling as well as on-demand repair of composite structures.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Materials Scorecards, Phase 2: Advanced Materials and Manufacturing Technology

This report presents updated material score cards with detailed justification of the proposed rating provided and quantifies the readiness of the advanced manufacturing of materials for nuclear applications. Based on an expanded literature review of available data, the scores in this report (Phase 2) have either been modified or remained constant as compared with Phase 1 scoring. The rating justification are provided for each scoring criteria whereas the maturity quantification of additively manufactured alloys and the knowledge gaps are discussed with reference traceability. This report focuses on the detailed justification and traceability for the adoption of additively manufactured 316SS, SS304, Alloy 800H, Graphite C/C, Alloy N, Silicon Carbide, HT9, Alloy 617, and Alloy 718. Significant variability in data and knowledge gaps exist among the identified materials. The scorecards are therefore based on published literature data, industry response to a survey, stakeholder input collected at workshops, and expert opinion. The interpretation and assessment were somewhat challenged as experimental process parameters and methodology varied and best judgment was exercised for score quantification. This assessment reflects the overall level of technical maturity for AM materials and their deployment in Gen-VI nuclear systems. These Phase 2 scorecards are likely to be revised based on additional input from stakeholders and as new research results become available.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Directed energy deposition additive manufacturing of functionally graded Al-W composites

Directed energy deposition using laser heat sources (DED-L) is a metal additive manufacturing method that can be used to fabricate functionally graded materials by feeding multiple powder streams directly into a laser-generated melt pool. Additionally, the composition can be spatially varied by independent control of the materials feed rates. DED-L additive manufacturing is used in this work to create continuously graded Al/W composites that span 0–55 vol% W in Al over length scales from 0.6 to 1.2 mm with individual layers on the order of 0.1 mm and powder particle sizes on the order of 10 µm. The obtained composition and thickness ranges are comparable to those typically achieved using conventional powder metallurgy approaches and enables fabrication of composites to be used as a high impedance graded density impactor (GDI) in dynamic ramp compression experiments to study matter under extreme conditions. DED-L additive manufacturing of a GDI presents an opportunity to reduce GDI fabrication time to less than a day compared to many weeks by conventional methods. It is also possible to scale the deposition by DED-L to essentially unlimited dimensions in the lateral directions, whereas conventional methods become limited.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Enable superior performance of ultra-high loading electrodes through the cost-efficient solvent-free electrode manufacturing technology

This research explores an innovative solvent-free method for fabricating ultra-high loading NMC811 and graphite electrodes (~6mAh∙cm -2 ), showcasing remarkable electrochemical performance enhancements compared to the electrodes prepared by the conventional slurry-casting method. Here, the optimized microstructure with dry-printed (DP) electrodes enhanced electrolyte penetration and minimized lithium-ion diffusion tortuosity resulting in improved rate performance at high current rates. Additionally, this innovative electrode manufacturing approach enables more uniform CEI and SEI formation and growth, which effectively doubles the cycle life of single-layer pouch cells with DP electrodes. Beyond the performance enhancements, this method also offers a notable 29.2 % overall cost advantages, potentially revolutionizing future battery manufacturing. The findings presented in this work underscore the potential of solvent-free manufacturing technology as a high-loading capable and cost-efficient path for advanced battery production.

25 ENERGY STORAGE↗

DOE OSTI2023

Safety Related Concerns with Installation and Use of Switch-Rated Plug/Receptacle Combinations in Lieu of Metal-Enclosed Disconnect Switches

The manufacturers of Nationally Recognized Testing Laboratory (NRTL) listed, switch-rated, plug and receptacle combinations tout their convenience, reliability, efficiency, and compliance with both the National Fire Protection Association (NFPA) 70®, National Electric Code (NEC), and National Fire Protection Association 70E®, The Standard for Electrical Safety in the Workplace, as advantages to using these products in lieu of traditional metal-enclosed disconnect switches. The purpose of this paper is to raise awareness of several unintended consequences that can result when replacement involves high energy cord and plug connected equipment. This paper describes several possible issues in complying with the NFPA 70 Articles 110 and 400 and NFPA 70E Articles 110 and 130 that should be considered when using load rated plug/receptacle combinations. This paper is intended to address high energy circuits typically associated with 480 volt pin and sleeve type connections in applications where incident energy levels may exceed 1.2 calories/centimeter² (cal/cm²).

99 GENERAL AND MISCELLANEOUS↗

DOE OSTI2021

Structure-Property Relationships of Additively Manufactured Ni-Nb Alloys [Slides]

In this work, scratch and nanoindentation testing was used to determine hardness, fracture toughness, strain rate sensitivity, and activation volumes on additively manufactured graded and uniform Ni-Nb bulk specimens. Characterization showed the presence of a two phase system consisting of Ni 3 Nb and Ni 6 Nb 7 intermetallics. Intermetallics were multimodal in nature, having grain and cell sizes spanning from a few nanometers to 10s of micrometers. The unique microstructure resulted in impressively high hardness, up to 20 GPa in the case of the compositionally graded sample. AM methods with surface deformation techniques are a useful way to rapidly probe material properties and alloy composition space.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Structure-Property Relationships of Additively Manufactured Ni-Nb Alloys [Slides]

36 MATERIALS SCIENCE↗

DOE OSTI2025

DEVELOPMENT OF INEXPENSIVE HIGH TEMPERATURE NITI-BASED SHAPE MEMORY ALLOYS FOR POWDER BED ADDITIVE MANUFACTURING

NiTi and NiTi-based Shape Memory Alloys (SMA) exhibit a reversible solid-state phase transformation from martensite to austenite driven by thermal energy. High temperature (Mf>100°C) SMAs are martensite at room temperature and can be fabricated into solid-state actuators that return to a pre-programmed shape against a designed load after heating to transformation threshold. Reactive as-fabricated additively manufactured parts (4-D printing) is the current state of the art in manufacturing of SMAs but requires compositions compliant to rapid solidification. Existing actuator designs are developed from commercially available, highly investigated material compositions. However, existing high temperature high performance (high actuation strain, low thermal hysteresis) shape memory alloys contain significant (>10% at.) portions of high-cost Platinum Group Metals (PGMs). It is of significant scientific interest to investigate material compositions that are peer performing or superior to PGMs whose constituent elements represent a significant cost savings. Shape memory alloy properties vary significantly with small (0.1% at.) compositional changes making robust investigative sample sets very large. Computational material design can be deployed to shrink the compositional space of possible alloy combinations and reduce the experimental load in material discovery. Investigating shape memory effect (SME) and validating process additive process parameters for a single novel composition is cost intensive in both time and consumed materials. Additionally, sub-optimal processing, oxygen, or solidification rate sensitivity could render additively manufacturing specimens without micro, macro cracks, or significant chemical variance impossible. Unfortunately, such failure susceptibility cannot be simulated. Therefore, a research pathway to validate novel shape memory alloy compositions for powder bed fusion additive manufacturing without the need for powdered feedstock is also proposed. This research investigates novel high temperature shape memory alloys for actuators without platinum group alloying elements to discover one that could be commercially viable as an additive manufacturing feedstock.

Sundermann, Tayler↗

DOE OSTI2024

C2C Expert Match Technical Assistance: City of Reading, Pennsylvania [Slides]

The City of Reading, located in southeastern Pennsylvania, is the main city in the Greater Reading Area and the county seat of Berks County, with a population of approximately 95,112 as of 2020. Historically a disinvested manufacturing community, it has a poverty rate of around 40%, a housing stock averaging 90 years old, and an owner-occupied housing rate below 40%. In 2019, Reading adopted a resolution to achieve 100% renewable energy by 2050. The city aims to transition residential, small commercial, and small manufacturing sectors to renewable energy for electricity and heating, bypassing natural gas. This C2C Expert Match aimed to improve the energy efficiency and comfort of older rowhomes in Reading, which often rely on home heating oil and lack cooling systems. A representative energy model of a typical rowhome was developed to evaluate retrofit strategies focused on reducing overheating risk, as well as the potential impacts of heat pump installation. Additionally, resources such as case studies and best practices on energy efficiency, thermal resilience, and electrification retrofits were gathered to support the implementation of effective measures in the community.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2020

Microstructure and properties of a high temperature Al–Ce–Mn alloy produced by additive manufacturing

An Al–10Ce-8Mn (wt%) alloy was designed and fabricated by laser powder bed fusion additive manufacturing (AM). The rapid cooling rates of the AM process produced a refined microstructure with a large fraction of reinforcing intermetallic phases. The tensile properties of the alloy were characterized in the as-fabricated state and following thermal exposure. The properties of the as-fabricated microstructure showed exceptional high-temperature performance and strength retention at elevated temperatures up to 400 °C relative to benchmark wrought Al and AM Al alloy properties. Characterization of the microstructure and thermodynamic modeling of the ternary Al–Ce–Mn system rationalized the solidification and solid-state phase transformations. Finally, analysis of the relevant strengthening mechanisms for both the as-fabricated and thermally exposed conditions was performed.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Primary solidification of ternary compounds in Al-rich Al–Ce–Mn alloys

Primary solidification of ternary compounds Al 20 Mn 2 Ce and Al 10 Mn 2 Ce were analyzed through the coupling of the thermodynamic modeling and classic nucleation theory. Thermodynamic models of Al 20 Mn 2 Ce and Al 10 Mn 2 Ce were developed using the CALPHAD approach based on first-principles calculated enthalpy of formation and experimental data obtained from this work and the literature. The analysis suggested that despite the larger thermodynamic driving force for nucleation of Al 10 Mn 2 Ce, nucleation is preferred for the Al 20 Mn 2 Ce phase in the highly undercooled liquid due to its smaller interfacial energy. Therefore, manufacturing methods with rapid cooling rates will favor primary solidification of Al 20 Mn 2 Ce for Al-rich Al–Ce–Mn alloys.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Antimicrobial properties of nanostructured surfaces – demonstrating the need for a standard testing methodology

Bioinspired nanostructured materials that exhibit antimicrobial properties are being synthesized and tested at increasing rates for use in healthcare, manufacturing processes, and diagnostics. Although progress has been made in improving and understanding their bactericidal activity, arguably, the biggest problem currently in the field is the lack of a standard testing methodology that allows for optimal characterization and better comparison of emerging nanostructures. In this work, we examine two forms of nanostructured silicon that vary in their ability to kill certain bacterial species due to different physical mechanisms and derive guidelines for the comparative testing. We perform a comprehensive evaluation of methodologies used extensively in the field (e.g., colony counting and live dead analysis) and the novel application of high-throughput flow cytometry. The data reveal how the techniques are complementary but not always directly equivalent or correlative. Therefore, comparison of results obtained using different methodologies on different materials can be grossly misleading. We report significant variations in bactericidal efficiencies depending on experimental environments (medium type, etc.) and methodologies employed. In addition, we demonstrate how cytometry is yet another powerful complementary tool that can aid the mechanistic understanding of antimicrobial activities of rough surfaces. Besides standardization for comparison, ultimately, evaluation methods need to consider anticipated applications. Then and only then can the true potential (or limitation) of a novel material be determined for its suitability for advancement in a particular field of use.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2022

Screen-Printed Contacts for Crystalline Silicon Solar Cells: An Overview

Over the years, the photovoltaic market, worldwide, has been witnessing a double-digit growth rate. The silicon solar cell manufacturing technology has evolved to utilize raw materials optimally to address this growth. One of the ways in which manufacturers are addressing the challenge is by increasing the cell size and making thinner wafers. With this change in parameters, understanding the metal contact formation in solar cells becomes paramount to improve their efficiency. Screen printing is a widely used method to form metal contacts on solar cells and is ideally suited for large-volume manufacturing. This paper presents a review of the (a) role of screen printing in various solar cell architectures and (b) existing models for current conduction and contact formation mechanisms. An alternate approach to current conduction and contact formation mechanism in silicon solar cells is proposed.

contacts↗

DOE OSTI2023

"Safety First: Though on the Other Hand, Time is Critical”

This talk describes the deployment of research-quality software and hardware for open-road driving experiments by fleets of vehicles. Technological advancements in single-vehicle autonomy have expanded beyond the academic community, and are driven largely by industry stakeholders and manufacturers. However, as the penetration rate of cars with advanced driver assistance features increases, the impact on emergent behavior in traffic is still unknown. Compelling reasons to experiment within open-road conditions must be considered alongside the technical and human factor safety issues in deploying experimental controllers. This is even more challenging when it is necessary to deploy experimental fleets at scale. The talk will describe approaches for co-design of a research testbed for societal-scale systems. Discussion is devoted to the research-quality data gathering and control layers and their technical implementation, the different interfaces for experts in other fields to use these testbeds for research without violating safety requirements, and process and management considerations when deploying the platforms at scale when considering training time and operation complexity of human operators.

Sprinkle, Jonathan↗

DOE OSTI2024

An in situ imaging investigation of the effect of gas flow rates on directed energy deposition

Gas flow rates in Directed Energy Deposition (DED) Additive Manufacturing (AM) can significantly affect the quality of built parts by altering melt pool geometry. Using a DED process replicator and in situ synchrotron radiography, together with analogous experiments in an industrial DED machine, we investigate the impact of carrier gas and shield gas flow rates on build quality. The results reveal that there is a critical shield gas flow rate above which melt pools are flattened, tracks widen, and thus layer thickness decreases. The reduction in layer thickness is most prominent in conditions with low carrier gas flow rate, as the highly turbulent shield gas flow may divert slow moving powder particles away from the melt pool, decreasing capture efficiency. Very high flow rates increase internal porosity, as fast-moving particles impacting the melt pool surface can entrain chamber gas behind them. High gas flow rates also cool the melt pool, creating shallower melt pools with increased thermal gradients near the solidification front, increasing pore entrapment in the solidified track.

Additive manufacturing↗