Search NASA⌕ Search

SEARCH · Search NASA

Results for “material interface reconstruction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Unveiling the Interfacial Reconstruction Mechanism Enabling Stable Growth of the Delafossite PdCoO 2 on Al 2 O 3 and LaAlO 3

Delafossites, composed of noble metal (A + ) and strongly correlated sublayers (BO 2 – ), form natural superlattices with highly anisotropic properties. These properties hold significant promise for various applications, but their exploitation hinges on the successful growth of high-quality thin films on suitable substrates. Unfortunately, the unique lattice geometry of delafossites presents a significant challenge to thin-film fabrication. Different delafossites grow differently, even when deposited on the same substrate, ranging from successful epitaxy to complete growth suppression. These variations often lack a clear correlation to obvious causes like lattice mismatch. Unidentified stabilization mechanisms appear to enable growth in certain cases, allowing these materials to form stable thin films or act as buffer layers for subsequent delafossite growth. This study employs advanced scanning transmission electron microscopy techniques to investigate the nucleation mechanism underlying the stable growth of PdCoO 2 films on Al 2 O 3 and LaAlO 3 substrates grown via molecular-beam epitaxy. Our findings reveal the presence of a secondary phase within the substrate surface that stabilizes the films. This mechanism deviates from the conventional understanding of strain relief mechanisms at oxide heterostructure interfaces and differs significantly from those observed for Cu-based delafossites.

36 MATERIALS SCIENCE↗

Fluoro‐Ethylene‐Carbonate Plays a Double‐Edged Role on the Stability of Si Anode‐Based Rechargeable Batteries During Cycling and Calendar Aging

Abstract The energy storage density of Li‐ion batteries can be improved by replacing graphite anodes with high‐capacity Si‐based materials, though instabilities have limited their implementation. Performance degradation mechanisms that occur in Si anodes can be divided into cycling stability (capacity retention after repeated battery cycles) and calendar aging (shelf life). While cycling instabilities and improvement strategies have been researched intensively, there is little known about the underlying mechanisms that cause calendar aging. In this work, multiple electron microscope techniques are used to explore the mechanism that governs calendar aging from the sub‐nanometer‐to‐electrode scale. Plasma focused ion beam tomography is used to create 3D reconstructions of calendar aged electrodes and revealed the growth of a LiF‐rich layer at the interface between the copper current collector and the silicon material, which can lead to delamination and increased interfacial impendence. The LiF layer appeared to derive from the fluoro‐ethylene‐carbonate electrolyte additive, which is commonly used to improve cycling stability in Si‐based systems. The results reveal that additives necessary to improve cycling stability can cause performance degradation over the long‐term during calendar aging. The results show that high performing, stable systems require careful design to simultaneously mitigate both cycling and calendar aging instabilities.

25 ENERGY STORAGE↗

The Design of Mechanically Compatible Fasteners for Human Mandible Reconstruction

Mechanically compatible fasteners for use with thin or weakened bone sections in the human mandible are being developed to help reduce large strain discontinuities across the bone/implant interface. Materials being considered for these fasteners are a polyetherertherketone (PEEK) resin with continuous quartz or carbon fiber for the screw. The screws were designed to have a shear strength equivalent to that of compact/trabecular bone and to be used with a conventional nut, nut plate, or an expandable shank/blind nut made of a ceramic filled polymer. Physical and finite element models of the mandible were developed in order to help select the best material fastener design. The models replicate the softer inner core of trabecular bone and the hard outer shell of compact bone. The inner core of the physical model consisted of an expanding foam and the hard outer shell consisted of ceramic particles in an epoxy matrix. This model has some of the cutting and drilling attributes of bone and may be appropriate as an educational tool for surgeons and medical students. The finite element model was exercised to establish boundary conditions consistent with the stress profiles associated with mandible bite forces and muscle loads. Work is continuing to compare stress/strain profiles of a reconstructed mandible with the results from the finite element model. When optimized, these design and fastening techniques may be applicable, not only to other skeletal structures, but to any composite structure.

Roberts, Jack C.↗

Coupled numerical approach combining finite volume and lattice Boltzmann methods for multi-scale multi-physicochemical processes

A coupled (hybrid) simulation strategy spatially combining the finite volume method (FVM) and the lattice Boltzmann method (LBM), called CFVLBM, is developed to simulate coupled multi-scale multi-physicochemical processes. In the CFVLBM, computational domain of multi-scale problems is divided into two sub-domains, i.e., an open, free fluid region and a region filled with porous materials. The FVM and LBM are used for these two regions, respectively, with information exchanged at the interface between the two sub-domains. A general reconstruction operator (RO) is proposed to derive the distribution functions in the LBM from the corresponding macro scalar, the governing equation of which obeys the convection–diffusion equation. The CFVLBM and the RO are validated in several typical physicochemical problems and then are applied to simulate complex multi-scale coupled fluid flow, heat transfer, mass transport, and chemical reaction in a wall-coated micro reactor. The maximum ratio of the grid size between the FVM and LBM regions is explored and discussed. -- Highlights: •A coupled simulation strategy for simulating multi-scale phenomena is developed. •Finite volume method and lattice Boltzmann method are coupled. •A reconstruction operator is derived to transfer information at the sub-domains interface. •Coupled multi-scale multiple physicochemical processes in micro reactor are simulated. •Techniques to save computational resources and improve the efficiency are discussed.

97 MATHEMATICS AND COMPUTING↗

Evaluation of RMI Ejecta Sourcing from Reconstructed Interfaces in 2D FLAG Flyer-Plate Simulations

This study investigates the performance of RMI ejecta sourcing from a reconstructed interface in two-dimensional FLAG ejecta flyer-plate simulations. Enabling the RMI ejecta model to operate on reconstructed interfaces has been a longstanding challenge in FLAG, limiting its applicability to experiments in which interface reconstruction is not required. Addressing this limitation is therefore an important step toward expanding the model’s predictive capability. The first phase of this effort focused on identifying a flyer-plate/target configuration that produces large ejecta clouds from two distinct shocks using the standard RMI ejecta model. A series of simulations examined the effects of flyer composition, layer thickness, and mesh resolution on shock structure and ejecta formation. VISAR traces were used to evaluate shock timing and identify configurations that produced a clear double-shock response. A copper middle-layer flyer with a doubled tin layer yielded the most favorable shock characteristics and was selected as the baseline configuration. After confirming this configuration performed as expected when running a reference FLAG version, it became the basis for three simulations: (1) a standard two-dimensional ejecta flyer-plate calculation using a reference FLAG version, (2) the same calculation with the reconstructed interface option enabled, and (3) a calculation employing ALE strategies to force the ejecta model to operate on the reconstructed interface. While the baseline simulation produced the expected ejecta response, the reconstructed interface approach did not result in measurable ejecta, indicating that this capability remains under development. These results highlight both the progress made and the remaining challenges in extending the RMI ejecta model to reconstructed interfaces.

36 MATERIALS SCIENCE↗

Localization of a Portion of an Endorectal Balloon for Prostate Image-Guided Radiation Therapy Using Cone-Beam Tomosynthesis: A Feasibility Study

Purpose: To assess the feasibility of using cone-beam tomosynthesis (CBTS) to localize the air-tissue interface for the application of prostate image-guided radiation therapy using an endorectal balloon for immobilization and localization. Methods and Materials: A Feldkamp-David-Kress-based CBTS reconstruction was applied to selected sets of cone-beam computed tomography (CBCT) projection data to simulate volumetric imaging achievable from tomosynthesis for a limited range of scan angles. Projection data were calculated from planning CT images of 10 prostate cancer patients treated with an endorectal balloon, as were experimental CBCT projections for a pelvic phantom in two patients. More than 50 points at the air-tissue interface were objectively identified by an intensity-based interface-finding algorithm. Using three-dimensional point sets extracted from CBTS images compared with points extracted from corresponding CBCT images, the relative shift resulting from a reduced scan angle was determined. Because the CBCT and CBTS images were generated from the same projection data set, shift identified was presumed to be due to distortions introduced by the tomosynthesis technique. Results: Scans of {>=}60 Degree-Sign were shown to be able to localize an air-tissue interface near the isocenter with accuracy on the order of a millimeter. The accuracy was quantified in terms of the mean discrepancy as a function of reconstruction angle. Conclusion: This work provides an understanding of the effect of scan angle used in localization of a portion of an endorectal balloon by means of CBTS. CBTS with relatively small scan angles is capable of accurately localizing an extended interface near the isocenter and may provide clinically relevant measurements to guide IGRT treatments while reducing imaging radiation to the patient.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Observing crystal nucleation in four dimensions using atomic electron tomography

Nucleation plays a critical role in many physical and biological phenomena that range from crystallization, melting and evaporation to the formation of clouds and the initiation of neurodegenerative diseases. However, nucleation is a challenging process to study in experiments, especially in the early stage when several atoms or molecules start to form a new phase from a parent phase. A number of experimental and computational methods have been used to investigate nucleation processes, but experimental determination of the three-dimensional atomic structure and the dynamics of early stage nuclei has been unachievable. Here we use atomic electron tomography to study early stage nucleation in four dimensions (4D: that is, including time) at atomic resolution. Using FePt nanoparticles as a model system, we find that early stage nuclei are irregularly shaped, each has a core of one to a few atoms with the maximum order parameter, and the order parameter gradient points from the core to the boundary of the nucleus. We capture the structure and dynamics of the same nuclei undergoing growth, fluctuation, dissolution, merging and/or division, which are regulated by the order parameter distribution and its gradient. These experimental observations are corroborated by molecular dynamics simulations of heterogeneous and homogeneous nucleation in liquid–solid phase transitions of Pt. Our experimental and molecular dynamics results differ from classical nucleation theory, indicating that a theory beyond this is needed to describe early stage nucleation at the atomic scale. Looking forward, we anticipate that the reported approach will open the door to the study of many fundamental problems in materials science, nanoscience, condensed matter physics and chemistry, such as phase transition, atomic diffusion, grain boundary dynamics, interface motion, defect dynamics and surface reconstruction with 4D atomic resolution.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

GENFIRE: A generalized Fourier iterative reconstruction algorithm for high-resolution 3D imaging

Tomography has made a radical impact on diverse fields ranging from the study of 3D atomic arrangements in matter to the study of human health in medicine. Despite its very diverse applications, the core of tomography remains the same, that is, a mathematical method must be implemented to reconstruct the 3D structure of an object from a number of 2D projections. Here, we present the mathematical implementation of a tomographic algorithm, termed GENeralized Fourier Iterative REconstruction (GENFIRE), for high-resolution 3D reconstruction from a limited number of 2D projections. GENFIRE first assembles a 3D Fourier grid with oversampling and then iterates between real and reciprocal space to search for a global solution that is concurrently consistent with the measured data and general physical constraints. The algorithm requires minimal human intervention and also incorporates angular refinement to reduce the tilt angle error. We demonstrate that GENFIRE can produce superior results relative to several other popular tomographic reconstruction techniques through numerical simulations and by experimentally reconstructing the 3D structure of a porous material and a frozen-hydrated marine cyanobacterium. As a result, equipped with a graphical user interface, GENFIRE is freely available from our website and is expected to find broad applications across different disciplines.

36 MATERIALS SCIENCE↗

Harnessing the surface structure to enable high-performance cathode materials for lithium-ion batteries

The ever-increasing demand for high-performance batteries have been driving the fundamental understanding of the crystal/surface structural and electrochemical properties of intercalation cathode materials, among which the olivine-type, spinel and layered lithium transition metal oxide materials have received particular attention in the past decade due to their successful commercialization. While the most current studies focus on the macroscopic and bulk crystal structure of these materials, our previous work suggests that, as a confined region where charge transfer takes place, the interfacial structures of cathode materials largely dictate their electrochemical performances due to the structural symmetry breaking from 3D (bulk) to 2D (surface), which leads to reconstructions under the different chemical/electrochemical conditions. By summarizing works in this subject and offering our perspectives, this tutorial review will reveal for the first time the correlation between surface structure and interface reconstruction at atomic/molecular scales and their direct impact on corresponding electrochemical performances. More importantly, by extending the knowledge obtained from these three well-studied system, we believe that the same principles established could universally apply to other cathode materials that have been the frontiers of new battery chemistries.

25 ENERGY STORAGE↗

Four-dimensional microstructurally small fatigue crack growth in cyclically loaded nickel superalloy specimen

Here, we nondestructively image a low-solvus high refractory (LSHR) nickel base specimen microstructure during cyclic loading to characterize crack propagation during the microstructurally small crack (MSC) growth regime. Micro-computed tomography (uCT) is used to characterize the material density and identify crack interfaces, while high-energy diffraction microscopy (HEDM) provides snapshots of the microstructural orientation field changes. From these measurements, data are computationally reconstructed and coregistered to describe the specimen’s configuration before load, before crack nucleation, and throughout the crack propagation/loading process. An MSC forms at a FIB-cut notch, which was previously placed to concentrate stress at the center of the specimen gauge, and propagates along a facet parallel to the local {1 1 1} crystallographic plane. Analysis of available crystallographic slip directions and measured point-to-point disorientation axes indicate probable single and coplanar slip activity along FCC octahedral planes within this region. Similar analyses of other crack propagation facets reveal generally slower growth along directions favoring zig-zag cross and codirectional cross slip, which are often disfavored at room temperature.

36 MATERIALS SCIENCE↗

A Many-Body Perturbation Theory Approach to Energy Band Alignment at the Crystalline Tetracene–Silicon Interface

Hybrid inorganic–organic semiconductor (HIOS) interfaces are of interest for new photovoltaic devices operating above the Shockley–Queisser limit. Predicting energy band alignment at the interfaces is crucial for their design, but represents a challenging problem due to the large scales of the system, the energy precision required and a wide range of physical phenomena that occur at the interface. To tackle this problem, many-body perturbation theory in the non-self-consistent GW approximation, orbital relaxation corrections for organic semiconductors, and line-up potential method for inorganic semiconductors which allows for tractable and accurate computing of energy band alignment in crystalline van-der-Waals hybrid inorganic–organic semiconductor interfaces are used. In this work, crystalline tetracene physisorbed on the clean hydrogen-passivated 1 × 2 reconstructed (100) silicon surface is studied. Using this computational approach, it is found that the energy band alignment is determined by an interplay of the mutual dynamic dielectric screening of two materials and the formation of a dipole layer due to a weak hybridization of atomic/molecular orbitals at the interface. The significant role of the exchange-correlation effects in predicting band offsets for the hybrid inorganic–organic semiconductor interfaces is also emphasized.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Level Set Evaporation Model for Heterogeneous Atom Probe Tip

With the development of local electrode atom probe tomography (LEAP), the materials systems feasible for atomic structure determination has expanded from predominantly metals to include heterogeneous materials with complex structure and compositions. This makes the 3D atomic structure determination possible for most energy materials in battery, fuel cell, semiconductor, and nuclear applications. Atom probe tomography (APT) has been utilized to study multiphase materials with segregation and interface problems. The unique and quantitative information retrieved from APT can provide a foundation for the study of kinetic pathways, nanoscale composition mapping, multilayer interfacial segregation, dislocations and grain boundaries. However, a new challenge surfaces when the materials systems expand into heterogeneous materials: the traditional structure reconstruction introduces false magnification and large artifacts due to the underlying assumption of uniform and isotropic evaporation.

Atom probe, heterogeneous structure, evporation mo↗

Non-Diffusive Volume Advection with A High Order Interface Reconstruction Method

We show that non-diffusive volume advection in two-dimensions is achieved with several benchmark problems using a newly developed high-order volume of fluids (VOF) interface reconstruction method. (1) A new VOF interface reconstruction method using circular/corner facets (linear facets are a degenerate case of arcs). We create a circular interface facet in each mixed zone by matching neighbor volume with a hybrid Newton’s-bisection method and the local solution is final. In the general case, the new VOF interface reconstruction has 3rd order accuracy and can be easily made seamless. The new method addresses intrinsic issues with Young’s method such as gaps between interface facets in the case of a curved interface, and inability to define curvature nor identify corners. (2) A non-diffusive volume advection scheme. In an ALE advection step, a well-defined interface can be carried over through a Lagrange step and used to compute volume distribution into a relaxed mesh. Then, an interface reconstruction step is performed to redefine the interface in the relaxed mesh. We must point out that the interface carried over is also a solution of interface reconstruction because all the volume fractions in the relaxed mesh are naturally matched. We provide an interface tracking method compatible with our reconstruction scheme, where it is granted to use the prior info as an initial guess to capture sub-mesh resolution features. As a result, we are able to treat multiple facets inside a single mixed cell and obtain highly accurate, non-diffusive solution for advection problems with rather coarse meshes. We show our solutions for two-dimensional incompressible flows with two materials with a) the X + O diagonal translation; b) the Zalesak rotational test; and c) the single vortex spiral test.

97 MATHEMATICS AND COMPUTING↗

Epitaxial growth of CoxMnySiz (111) thin films in the compositional range around the Heusler alloy Co2MnSi

Epitaxial growth and structural properties of Co{sub x}Mn{sub y}Si{sub z} thin films on Ge (111) substrates, including the Heusler alloy Co{sub 2}MnSi (111), have been studied using combinatorial molecular beam epitaxy (MBE) techniques. In situ reflection high energy electron diffraction and ex situ x-ray diffraction experiments show that high quality coherent MBE growth with fcc (111) stacking can be achieved over a relatively large composition space that includes Co{sub 2}MnSi. The highest structural and chemical ordering is observed near the composition of Co{sub 0.63}Mn{sub 0.14}Si{sub 0.23} rather than that at the Heusler stoichiometry of Co{sub 2}MnSi. The in-plane crystallographic axis of the fcc film exhibits a 60{sup o} rotation with respect to that of the Ge substrate. The rotation appears to be originated at the film-substrate interface, as a result of the symmetry and stacking of the Ge (111) surface reconstruction.

36 MATERIALS SCIENCE↗

Sequential multidimensional heteroepitaxy of chalcogen-sharing 3D ZnSe and 2D MoSe 2 with quasi van der Waals interface engineering

Two-dimensional (2D) materials are emerging as a promising platform for epitaxial growth, largely free from the constraints of lattice constant and thermal expansion coefficient mismatches. Among them, transition metal dichalcogenides (TMDs), known for their superior electrical properties, are ideal for ultrathin semiconductor applications. Their unique epitaxial characteristics enable seamless integration with 3D materials, facilitating the development of gate stacks and heterojunction devices. In this regard, developing a process for growing high-quality 3D epitaxial materials before and after the growth of 2D TMDs and understanding the 2D/3D interface are crucial. This study demonstrates the sequential growth of fully epitaxial ZnSe/MoSe 2 /ZnSe heterostructures using metal-organic chemical vapor deposition. ZnSe and MoSe 2 , sharing chalcogen elements, enable large-area quasi van der Waals epitaxy with sharp interfaces without intermediate phase. Multiscale analysis involving transmission electron microscopy and density functional theory calculation reveals lattice commensurability, van der Waals gaps, termination, and interfacial reconstruction. Understanding these interactions is crucial for advancing multidimensional integration of 2D and 3D materials.

36 MATERIALS SCIENCE↗

Machine learning for detection of 3D features using sparse x-ray tomographic reconstruction

In many inertial confinement fusion (ICF) experiments, the neutron yield and other parameters cannot be completely accounted for with one and two dimensional models. This discrepancy suggests that there are three dimensional effects that may be significant. Sources of these effects include defects in the shells and defects in shell interfaces, the fill tube of the capsule, and the joint feature in double shell targets. Due to their ability to penetrate materials, x rays are used to capture the internal structure of objects. Methods such as computational tomography use x-ray radiographs from hundreds of projections, in order to reconstruct a three dimensional model of the object. In experimental environments, such as the National Ignition Facility and Omega-60, the availability of these views is scarce, and in many cases only consists of a single line of sight. Mathematical reconstruction of a 3D object from sparse views is an ill-posed inverse problem. These types of problems are typically solved by utilizing prior information. Neural networks have been used for the task of 3D reconstruction as they are capable of encoding and leveraging this prior information. We utilize half a dozen, different convolutional neural networks to produce different 3D representations of ICF implosions from the experimental data. Deep supervision is utilized to train a neural network to produce high-resolution reconstructions. These representations are used to track 3D features of the capsules, such as the ablator, inner shell, and the joint between shell hemispheres. Machine learning, supplemented by different priors, is a promising method for 3D reconstructions in ICF and x-ray radiography, in general.

Wolfe, Bradley T. (ORCID:0000000268301614)↗

Metallic surface states in elemental electrides

Recent high-pressure studies have uncovered an alternative class of materials, insulating electride phases created by compression of simple metals. These exotic insulating phases develop an unusual electronic structure: the valence electrons move away from the nuclei and condense at interstitial sites, thereby acquiring the role of atomic anions or even molecules. In this work, we show that they are also topological phases as they exhibit a wide diversity of metallic surface states (SSs) that are controlled by the bulk electronic structure. The electronic reconstruction occurs that involves charge transfer between the surfaces of opposite polarity making both of them metallic, resembling the appearance of the two-dimensional gas at the renowned SrTiO 3 /LaAlO 3 interface. Remarkably, these materials thus embody seemingly disparate physical concepts—chemical electron localization, topological control of bulk-surface conductivity, and the two-dimensional electron gas. Such metallic SSs could be probed by direct electrical resistance or by standard photoemission measurements on recovery to ambient conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhanced interfacial ferromagnetism and exchange bias in (111)-oriented LaNiO 3 / CaMnO 3 superlattices

Emergent properties of complex oxide interfaces are based on interface reconstruction that is driven by mismatch of electronic bands, valence states, interaction lengths, and even crystal symmetry of the interface. In particular, emergent ferromagnetism at the interface of two materials that do not exhibit ferro- or ferrimagnetism in the bulk has been stabilized as a result of competing exchange interactions. When LaNiO 3 and CaMnO 3 , which are a paramagnetic metal and antiferromagnetic insulator in the bulk, respectively, are brought together, ferromagnetism emerges at the interface. Here we show that in (111)-oriented LaNiO 3 / CaMnO 3 (LNO/CMO) superlattices, Ni 2+ -Mn 4+ superexchange interactions due to polar mismatch at the LNO/CMO interfaces are responsible for the emergent ferromagnetism. Compared to (001)-oriented LNO/CMO superlattices, (111)-oriented LNO/CMO superlattices exhibit enhanced interfacial ferromagnetism with a T C > 200 K, greater than the bulk antiferromagnetic transition temperature of CaMnO 3 and a saturated magnetic moment enhanced by up to a factor of 3. Furthermore, we observe exchange bias in (111)-oriented superlattices. The strong exchange interactions along the (111) interface, manifest in the enhanced T c and exchange bias, make this class of CMO-based materials with (111)-oriented interfaces good candidates for low-dimensional spin-polarized materials in spintronic applications.

36 MATERIALS SCIENCE↗