Search NASA⌕ Search

SEARCH · Search NASA

Results for “measurement error model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Developing a Radar Signal Simulator for the Community Radiative Transfer Model

Active radar instruments provide vertically resolved clouds and precipitation measurements that cannot be provided by the passive instruments. These active measurements are not conventionally assimilated into the data assimilation systems because of the lack of fast forward radiative transfer models and also difficulties in the error modelling of the measurements. This paper describes the development, evaluation, and sensitivity analysis for a forward radar model implemented in the Community Radiative Transfer Model (CRTM). The scattering properties required by the forward model are provided by the hydrometeor lookup tables that were generated using the discrete dipole approximation. The model is able to calculate both the reflectivity and the attenuated reflectivity for any given radar instrument at any given zenith angles as long as CRTM instrument specific coefficients are available. The evaluation using CloudSat measurements shows a very good agreement between the simulations and measurements as long as the input profiles of hydrometeors are consistent with the measured reflectivity profiles. Major sources contributing to the differences between the measured and simulated reflectivities are input hydrometeor profiles, scattering lookup tables, lack of melting layer in the forward model, CRTM scattering solvers, and attenuation calculations. In addition to the forward model, both Tangent Linear and Adjoint of the model are also implemented and tested within CRTM. These components may be required by some data assimilation systems for the assimilation of radar measurements.

radar↗
NASA NTRS2008

Identifying Bearing Rotordynamic Coefficients using an Extended Kalman Filter

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor-dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter s performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor-bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.

Miller, Bard A.↗
NASA NTRS2008

Identifying Bearing Rotordynamic Coefficients using an Extended Kalman Filter

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor-dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter s performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor-bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.

Miller, Brad A.↗
NASA NTRS2008

Identifying Bearing Rotodynamic Coefficients Using an Extended Kalman Filter

An Extended Kalman Filter is developed to estimate the linearized direct and indirect stiffness and damping force coefficients for bearings in rotor dynamic applications from noisy measurements of the shaft displacement in response to imbalance and impact excitation. The bearing properties are modeled as stochastic random variables using a Gauss-Markov model. Noise terms are introduced into the system model to account for all of the estimation error, including modeling errors and uncertainties and the propagation of measurement errors into the parameter estimates. The system model contains two user-defined parameters that can be tuned to improve the filter's performance; these parameters correspond to the covariance of the system and measurement noise variables. The filter is also strongly influenced by the initial values of the states and the error covariance matrix. The filter is demonstrated using numerically simulated data for a rotor bearing system with two identical bearings, which reduces the number of unknown linear dynamic coefficients to eight. The filter estimates for the direct damping coefficients and all four stiffness coefficients correlated well with actual values, whereas the estimates for the cross-coupled damping coefficients were the least accurate.

Miller, Brad A.↗
NASA NTRS2022

Robust Controller Synthesis for Vision-based Spacecraft Guidance and Control

This work develops a method for Robust Controller for Vision-based Spacecraft (RCVS) guidance and control, integral to the robust autonomy framework for multi-spacecraft for- mation control and reconfiguration applications. The method is built around the use of a photo-realistic simulator, where a camera is deployed on a tracking spacecraft (ego) in order to observe an uncontrolled spacecraft (target) in a Low Earth Orbit (LEO). In this direction, the proposed approach performs the relative state (attitude and position) estimation of the target spacecraft using Convolutional Neural Network (CNN). The state estimation error is then modeled and the corresponding error-bounds are obtained around a nominal trajectory of the ego and target spacecraft. Next, this work proposes a linear matrix inequalities (LMIs) based approach to controller synthesis, guaranteed to be robust against both model uncertainties and measurement errors, resulting from vision-based estimation. This controller is comprised of two distinct components, one synthesized based on the nominal trajectory, while the “robust” component corrects for deviations from the nominal trajectory. Finally, a tracking scenario that directly utilize the image data for spacecraft guidance and control, is presented to showcase the performance of the proposed robust autonomy framework.

Rahmani, Amir↗
NASA NTRS2001

Sensitivity of the Tropical Atmospheric Energy Balance to ENSO-Related SST Changes: Comparison of Climate Model Simulations to Observed Responses

This paper focuses on how fresh water and radiative fluxes over the tropical oceans change during ENSO warm and cold events and how these changes affect the tropical energy balance. At present, ENSO remains the most prominent known mode of natural variability at interannual time scales. While this natural perturbation to climate is quite distinct from possible anthropogenic changes in climate, adjustments in the tropical water and energy budgets during ENSO may give insight into feedback processes involving water vapor and cloud feedbacks. Although great advances have been made in understanding this phenomenon and realizing prediction skill over the past decade, our ability to document the coupled water and energy changes observationally and to represent them in climate models seems far from settled (Soden, 2000 J Climate). In a companion paper we have presented observational analyses, based principally on space-based measurements which document systematic changes in rainfall, evaporation, and surface and top-of-atmosphere (TOA) radiative fluxes. Here we analyze several contemporary climate models run with observed SSTs over recent decades and compare SST-induced changes in radiation, precipitation, evaporation, and energy transport to observational results. Among these are the NASA / NCAR Finite Volume Model, the NCAR Community Climate Model, the NCEP Global Spectral Model, and the NASA NSIPP Model. Key disagreements between model and observational results noted in the recent literature are shown to be due predominantly to observational shortcomings. A reexamination of the Langley 8-Year Surface Radiation Budget data reveals errors in the SST surface longwave emission due to biased SSTs. Subsequent correction allows use of this data set along with ERBE TOA fluxes to infer net atmospheric radiative heating. Further analysis of recent rainfall algorithms provides new estimates for precipitation variability in line with interannual evaporation changes inferred from the da Silva, Young, Levitus COADS analysis. The overall results from our analysis suggest an increase (decrease) of the hydrologic cycle during ENSO warm (cold) events at the rate of about 5 W/sq m per K of SST change. Model results agree reasonably well with this estimate of sensitivity. This rate is slightly less than that which would be expected for constant relative humidity over the tropical oceans. There remain, however, significant quantitative uncertainties in cloud forcing changes in the models as compared to observations. These differences are examined in relationship to model convection and cloud parameterizations Analysis of the possible sampling and measurement errors compared to systematic model errors is also presented.

Robertson, Franklin R.↗
NASA NTRS1975

The background for Skylab experiment T-002, manual navigation sightings

The background of the NASA-DOD manual navigation experiment (T002) on Skylab A is reviewed with emphasis on NASA's development of an error model for sextant measurements in midcourse navigation and on USAF's development of a low earth orbit manual navigation scheme. Instruments briefly described are a space sextant and space stadimeter, both of which are used by USAF in orbit navigation, the sextant by NASA in midcourse sightings. The rationale, data requirements, and data reduction procedures are discussed in terms of the goals of the agencies.

Randle, R. J.↗
NASA NTRS1978

Very Long Baseline Interferometry Applied to Polar Motion, Relativity and Geodesy

The causes and effects of diurnal polar motion are described. An algorithm is developed for modeling the effects on very long baseline interferometry observables. Five years of radio-frequency very long baseline interferometry data from stations in Massachusetts, California, and Sweden are analyzed for diurnal polar motion. It is found that the effect is larger than predicted by McClure. Corrections to the standard nutation series caused by the deformability of the earth have a significant effect on the estimated diurnal polar motion scaling factor and the post-fit residual scatter. Simulations of high precision very long baseline interferometry experiments taking into account both measurement uncertainty and modeled errors are described.

Ma, C.↗
NASA NTRS1980

Windfield retrieval from Doppler lidar observations

An approach to the retrieval of a vector wind field from Doppler lidar observations is developed in general terms. The field of radial velocity measurements from each look angle is modeled by a smooth surface, the parameters of the model being determined from the data by least squares techniques. The vector wind field and higher-order fields are obtained from the two modeled surfaces. Estimated measurement errors are taken into account, and error estimates are available for all output data sets.

Lee, R. W.↗
NASA NTRS1980

Windfield retrieval from Doppler lidar observations

An approach to the retrieval of a vector wind field from Doppler lidar observations is developed in general terms. The field of radial velocity measurements from each look angle is modeled by a smooth surface, the parameters of the model being determined from the data by least squares techniques. The vector wind field and higher order fields are obtained from the two modeled surfaces. Estimated measurement errors are taken into account, and error estimates are available for all output data sets.

Lee, R. W.↗
NASA NTRS1981

Three-axis attitude determination from vector observations

Two computationally efficient algorithms are presented for determining three-axis attitude from two or more vector observations. The first of these, the TRIAD algorithm, provides a deterministic (i.e., nonoptimal) solution for the attitude based on two vector observations. The second, the QUEST algorithm, is an optimal algorithm which determines the attitude that achieves the best weighted overlap of an arbitrary number of reference and observation vectors. Analytical expressions are given for the covariance matrices for the two algorithms using a fairly realistic model for the measurement errors. The mathematical relationship of the two algorithms and their relative merits are discussed and numerical examples are given. The advantage of computing the covariance matrix in the body frame rather than in the inertial frame (e.g., in terms of Euler angles) is emphasized. These results are valuable when a single-frame attitude must be computed frequently. They will also be useful to the mission analyst or spacecraft engineer for the evaluation of launch-window constraints or of attitude accuracies for different attitude sensor configurations.

Shuster, M. D.↗
NASA NTRS1983

CAD of control systems: Application of nonlinear programming to a linear quadratic formulation

The familiar suboptimal regulator design approach is recast as a constrained optimization problem and incorporated in a Computer Aided Design (CAD) package where both design objective and constraints are quadratic cost functions. This formulation permits the separate consideration of, for example, model following errors, sensitivity measures and control energy as objectives to be minimized or limits to be observed. Efficient techniques for computing the interrelated cost functions and their gradients are utilized in conjunction with a nonlinear programming algorithm. The effectiveness of the approach and the degree of insight into the problem which it affords is illustrated in a helicopter regulation design example.

Fleming, P.↗
NASA NTRS1983

A parameterization for downward longwave radiation from satellite meteorological data

An accurate and efficient parameterization is developed which computes clear-atmosphere downward longwave flux in terms of the water vapor burden and water-vapor-weighted average temperature of the surface-700 mb region. The parameterization is based on detailed radiative transfer calculations performed for a wide meteorological data base, consisting of 180 atmospheric models generated from climatological data and 106 radiosonde-measured models. The standard error of the computed fluxes was found to be about 4 percent of the mean value. It is also pointed out that strong heating or cooling of the surface, as shown by many TOVS data sets, caused larger errors in the computed fluxes.

Gupta, S. K.↗
NASA NTRS1988

Doppler and range determination for deep space vehicles using active optical transponders

This paper describes and analyzes two types of laser system employing active transponders that could accurately determine Doppler and range to deep space vehicles from earth-orbiting satellites. The first is a noncoherent optical system in which the Doppler effect on an intensity-modulating subcarrier is measured. The second is a coherent optical system in which the Doppler effect of the optical carrier itself is measured. Doppler and range measurement errors are mathematically modeled and, for three example systems, numerically evaluated.

Kinman, Peter W.↗
NASA NTRS1989

Extended Kalman filter for attitude estimation of the earth radiation budget satellite

The design and testing of an Extended Kalman Filter (EKF) for ground attitude determination, misalignment estimation and sensor calibration of the Earth Radiation Budget Satellite (ERBS) are described. Attitude is represented by the quaternion of rotation and the attitude estimation error is defined as an additive error. Quaternion normalization is used for increasing the convergence rate and for minimizing the need for filter tuning. The development of the filter dynamic model, the gyro error model and the measurement models of the Sun sensors, the IR horizon scanner and the magnetometers which are used to generate vector measurements are also presented. The filter is applied to real data transmitted by ERBS sensors. Results are presented and analyzed and the EKF advantages as well as sensitivities are discussed. On the whole the filter meets the expected synergism, accuracy and robustness.

Deutschmann, Julie↗
NASA NTRS1990

Extended Kalman Filter for attitude estimation of the Earth Radiation Budget Satellite

The design and testing of an Extended Kalman Filter (EKF) for ground attitude determination, misalignment estimation and sensor calibration of the Earth Radiation Budget Satellite (ERBS) are described. Attitude is represented by the quaternion of rotation and the attitude estimation error is defined as an additive error. Quaternion normalization is used for increasing the convergence rate and for minimizing the need for filter tuning. The development of the filter dynamic model, the gyro error model and the measurement models of the sun sensors, the IR horizon scanner and the magnetometers which are used to generate vector measurements are also presented. The filter is applied to real data transmitted by ERBS sensors. Results are presented and analyzed and the EKF advantages as well as sensitivities are discussed. On the whole the filter meets the expected synergism, accuracy and robustness.

Deutschmann, Julie↗
NASA NTRS2000

Autonomous Navigation Improvements for High-Earth Orbiters Using GPS

The Goddard Space Flight Center is currently developing autonomous navigation systems for satellites in high-Earth orbits where acquisition of the GPS signals is severely limited This paper discusses autonomous navigation improvements for high-Earth orbiters and assesses projected navigation performance for these satellites using Global Positioning System (GPS) Standard Positioning Service (SPS) measurements. Navigation performance is evaluated as a function of signal acquisition threshold, measurement errors, and dynamic modeling errors using realistic GPS signal strength and user antenna models. These analyses indicate that an autonomous navigation position accuracy of better than 30 meters root-mean-square (RMS) can be achieved for high-Earth orbiting satellites using a GPS receiver with a very stable oscillator. This accuracy improves to better than 15 meters RMS if the GPS receiver's signal acquisition threshold can be reduced by 5 dB-Hertz to track weaker signals.

Long, Anne↗