Search NASA⌕ Search

SEARCH · Search NASA

Results for “metal sintering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Microstructurally-Inspired Strategies to Print Tantalum and Tantalum-Tungsten Alloys

The goal of this project is to investigate strategies to print tantalum and tantalum- tungsten alloys, which are notoriously difficult to print with consistent results because of the sensitivity of the properties to small concentrations of interstitial impurities (particularly oxygen) and microstructure, and hence to processing conditions. The ultimate tensile stress (UTS) for non-additively manufactured Ta as a function of temperature shows a stunning variation. In direct metal laser sintering (DMLS) Ta, a strong dependence of porosity, grain morphology and texture on processing conditions was found.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Heat Exchanger Intensification Through Powder Processing and Enhanced Design (HIPPED)

High intensity, supercritical CO 2 heat exchangers capable of operating at temperatures between 800 and 1100 ˚C and pressures greater than 80 bar are considered a critical component for high efficiency power generation and a range of next-generation industrial processes. A novel heat exchanger concept was proposed in this project. The proposed concept involved a plate-type architecture with three-dimensional fins, called twisted s-shaped fins, that capitalize on additive manufacturing. Four manufacturing processes were studied to realize the complex envisioned design: press and sinter of metallic powders, directed energy deposition, laser powder bed fusion, and a novel powder bed process involving a photoreactive polymer called SEAM (scalable expeditious additive manufacturing), that later was developed at MSU. The team was able to manufacture subscale heat exchangers using laser powder bed fusion (LPBF) and SEAM. The team settled on using SEAM as a final manufacturing approach due to its very low cost. The SEAM-manufactured heat exchanger, however, when tested under pressure, exhibited leaks and the process still requires further development beyond the timeline of the project. To support the heat exchanger design and testing, the team developed a new high temperature flow loop allowing testing under high temperature and pressure. Computational modeling of the heat exchanger was also performed for the twisted s-shaped fins and the computations were validated with experimental data. The new twisted fins resulted in enhanced heat transfer and reduced pressure drop. To further minimize pressure drop in the plate heat exchanger, the team also developed a simplified model for flow maldistribution in the manifolds, providing a new tool for designers that eliminates the need for complex CFD calculations. A technoeconomic analysis was also developed to contrast SEAM with LPBF, this tool indicated that SEAM is several times less costly and offer significant promises as a rapid low cost additive manufacturing process for metallic systems.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Effects of Surface Treatments on the Outgassing of 3D-Printed 316L Stainless Steel.

Fermi National Accelerator Laboratory (Fermilab) is a world leader in designing and operating particle accelerators for nuclear and particle physics research. These accelerators rely on electric fields to propel particle beams, which are then directed and focused using magnetic fields. To ensure these beams travel without interference, they must move through an ultra-high vacuum environment, typically around 10⁻⁹ torr. Maintaining such a vacuum requires materials with exceptionally low outgassing rates. 316L stainless steel is a common material choice for vacuum systems due to its low outgassing rates, excellent corrosion resistance, non-magnetic properties, and high mechanical strength. When manufactured using traditional methods like machining, extrusion, and casting, the vacuum properties of 316L stainless steel are well understood. However, the behavior of 316L stainless steel produced through additive manufacturing, such as Direct Metal Laser Sintering (DMLS), is not as well documented. This study aims to determine the outgassing rate of 316L stainless steel fabricated using DMLS. The investigation focuses on measuring the outgassing rates of 1.5 2 vacuum reducers and evaluating the effects of surface preparation techniques, such as mechanical polishing and electropolishing, on the outgassing performance. Understanding the outgassing performance of 3D-printed 316L stainless steel could enable Fermilab engineers to adopt this fabrication method for producing complex parts designed for ultra-high vacuum environments. These advancements have the potential to benefit projects, such as the Long-Baseline Neutrino Facility (LBNF) and the Proton Improvement Plan-II (PIP-II), by improving design flexibility and fostering innovation in accelerator development.

Cloud, Jaiden [Central State University]↗
DOE OSTI2020

Binderjet Additive Manufacturing for Complex Heat Exchanger Geometries

Concentrated Solar Power (CSP) systems play a role in the worlds development of renewable energy. Mirrors are used to concentrate sunlight that is converted into electricity or other forms of useful energy. CSP impact depends significantly on its overall economics. The U.S. Department of Energy’s (DOE’s) Solar Energy Technology Office (SETO) cost goals for 2030include $0.05/kWh levelized cost of electricity (LCOE) for a baseload plant [1]. The power cycle cost goal is $900/kWe [1]. The envisioned recompression supercritical carbondioxide (sCO2) power cycle includes four heat exchangers, which together are at least ¾ of the total power cycle cost. Meeting the cost target requires reducing the heat exchanger cost. The 260 bar and 588 °C heat exchanger requirements are challenging. Shell and tube heat exchangers can meet the requirements, but the size and cost are prohibitive. State-of-the-art diffusion bonded printed circuit heat exchanger designs are 3 m3 or larger and expensive to manufacture. Additive manufacturing enables novel heat exchanger geometries that can reduce heat exchanger size and mass [2]. Binderjet technology is an additive manufacturing modality. It selectively deposits binder material onto the powder bed to form a solid part one layer at a time. Once applied, the binder is cured, the remaining powder removed, and the part heat treated in steps to remove the binder, sinter the metal powder, and densify the part. The Binderjet printing process is more than 10x faster than the best-known metal additive modality, direct metal laser melting (DMLM), thus enabling 10x the part through-put rate [3]. The high throughput rate results in a low-cost manufacturing process capable of creating complex heat exchanger geometries. This paper introduces a complex heat exchanger geometry and methods of Binderjet processing to fabricate the geometry.

Barua, Ananda↗
DOE OSTI2022

Keyhole-mode Microscopy Dataset for Laser Powder-bed Fusion Modeling

Laser powder-bed fusion (LPBF) is an additive manufacturing (AM) technology that uses high-power sintering lasers to precisely construct metal designs. Material is accumulated by selectively sintering regions of a metal powder layer to a growing structure underneath forming a 3D geometry. Certain conditions make fusion in this process to operate in "keyhole-mode," characterized by targeted materials evaporating as plasma. While keyhole-mode operations can produce deeper molten pools than that observed in "conduction-mode", this mode of operation is often undesirable, as its molten regions can collapse on themselves, encapsulating metal vapors and forming cavities. The formation of such cavities negatively affects strength and consistency of the fused materials. To identify and avoid these detrimental effects of keyhole-mode operation, considerable data collection and analysis regarding this mode of operation is needed. Therefore, under the support of the "Open Data Initiative," Lawrence Livermore National Lab is releasing a dataset for analysis of this keyhole effect, and the conditions which transition operation from conduction-mode to keyhole-mode melting. This dataset consists of 600+ micrographs from laser powder-bed single track runs, with differing cross-section angles and input parameters, operating under both normal and keyhole mode operations. This journal documents the collection, organization, and usage of this dataset.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Dynamic Metal–Support Interaction Dictates Cu Nanoparticle Sintering on Al 2 O 3 Surfaces

Nanoparticle sintering remains a critical challenge in heterogeneous catalysis. In this work, we present a unified deep potential (DP) model based on the Perdew–Burke–Ernzerhof approximation of density functional theory for Cu nanoparticles on three Al 2 O 3 surfaces (γ-Al 2 O 3 (100), γ-Al 2 O 3 (110), and α-Al 2 O 3 (0001)). Using DP-accelerated simulations, we reveal that the nanoparticle size-mobility relationship strongly depends on the supporting surface. The diffusion of nanoparticles on the two γ-Al 2 O 3 surfaces is almost independent of the size of the nanoparticle, while the diffusion on α-Al 2 O 3 (0001) decreases rapidly with increasing size. Interestingly, nanoparticles with fewer than 55 atoms diffuse several times faster on α-Al 2 O 3 (0001) than on γ-Al 2 O 3 (100) at 800 K while expected to be more sluggish based on their larger binding energy at 0 K. The diffusion on α-Al 2 O 3 (0001) is facilitated by dynamic metal–support interaction (MSI), where Al atoms move out of the surface plane to optimize contact with the nanoparticle and relax back to the plane as the nanoparticle moves away. In contrast, the MSI on γ-Al 2 O 3 (100) and on γ-Al 2 O 3 (110) is dominated by more stable and directional Cu–O bonds, consistent with the limited diffusion observed on these surfaces. Our extended MD simulations provide insight into the sintering processes, showing that the dispersity of the nanoparticles strongly influences the coalescence driven by nanoparticle diffusion. We observed that the coalescence of Cu 13 nanoparticles on α-Al 2 O 3 (0001) can occur in a short time (10 ns) at 800 K even with an initial internanoparticle distance increased to 3 nm, while the coalescence on the two γ-Al 2 O 3 surfaces are inhibited significantly by increasing the initial internanoparticle distance. These findings demonstrate that the dynamics of the supporting surface is crucial to understanding the sintering mechanism and offer guidance for designing sinter-resistant catalysts by engineering the support morphology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Thermodynamics and kinetics of interconversion between platinum nanoparticles and cations in zeolites

In metal-containing zeolites, sintering and redispersion processes exercise control over the identity of metal site structures, but the thermodynamic and kinetic factors that influence these molecular-level processes are not completely understood. Furthermore, we assess the ability of first principles informed free energy models (for supported and unsupported nanoparticles) and kinetic models integrating Ostwald ripening with atom trapping to describe the interconversion between Pt cations and nanoparticles encapsulated in chabazite (CHA) zeolites. Density functional theory-derived thermodynamic phase diagrams show that the interconversion between cations, favored in oxidizing environments, and particles, favored in reducing environments, is fully reversible within a wide range of their respective conditions (temperatures and pressures) for CHA and several other zeolite topologies. Kinetic Monte Carlo simulations of Pt redispersion are consistent with experimentally observed redispersion kinetics of encapsulated Pt nanoparticles in CHA zeolites, and model results suggest the zeolite host imparts additional stability for Pt nanoparticles. We envision our thermodynamic and kinetic models for Pt-CHA are also capable of describing nanoparticle and cation interconversions for other zeolite frameworks under similar conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Self-regeneration of supported transition metals by a high entropy-driven principle

The sintering of Supported Transition Metal Catalysts (STMCs) is a core issue during high temperature catalysis. Perovskite oxides as host matrix for STMCs are proven to be sintering-resistance, leading to a family of self-regenerative materials. However, none other design principles for self-regenerative catalysts were put forward since 2002, which cannot satisfy diverse catalytic processes. Herein, inspired by the principle of high entropy-stabilized structure, a concept whether entropy driving force could promote the self-regeneration process is proposed. To verify it, a high entropy cubic Zr 0.5 (NiFeCuMnCo) 0.5 O x is constructed as a host model, and interestingly in situ reversible exsolution-dissolution of supported metallic species are observed in multi redox cycles. Notably, in situ exsolved transition metals from high entropy Zr 0.5 (NiFeCuMnCo) 0.5 O x support, whose entropic contribution (TΔS config = T$\star$12.7 J mol -1 K -1 ) is predominant in ΔG, affording ultrahigh thermal stability in long-term CO 2 hydrogenation (400 °C, >500 h). Current theory may inspire more STWCs with excellent sintering-resistance performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Synthesis, Characterization, and Testing of High-Lithium-Density Composite Breeders

Solid tritium breeder materials must first and foremost have sufficiently high concentrations of lithium to enable a plant-scale tritium breeding ratio greater than 1:1. However, in addition to lithium content, such breeder materials must also meet other performance metrics including high tritium release rates, thermal conductivities, and irradiation damage tolerance. Perhaps most importantly, tritium breeders must maintain their mechanical integrity during reactor operation so as to avoid degradation which can jeopardize the functionality of the tritium breeder blanket module, which in most designs takes the form of a pebble bed geometry. Unfortunately, the mechanical robustness of most lithium-bearing ceramics under investigation for fusion applications is often inversely related to the lithium atom density. For example, a material such as lithium oxide (Li2O), which has one of the highest lithium atom densities, has a much lower mechanical splitting strength than lithium metatitanate (Li2TiO3), though Li2TiO3 has less than half the lithium atom density of Li2O. This work seeks to provide an alternative to monolithic ceramic tritium breeders, in the form of metal-reinforced composite tritium breeders. Specifically, composite tritium breeders have been synthesized combining Li2O with various ferrous metal reinforcements via electric field assisted sintering (EFAS), also known as spark plasma sintering (SPS). As the metal reinforcement content is increased, metallic networks are observed, via electron microscopy and X-ray computed tomography, to form throughout the composite material. Through destructive mechanical testing, even dilute metal reinforcement loading enables drastic mechanical strength improvements over pure Li2O while higher loadings give rise to quasi-ductile behavior and higher ultimate strengths than Li2TiO3 – while still maintaining a higher density of lithium atoms than Li2TiO3 and many other breeder candidates. In addition to microstructural characterization and mechanical testing, thermal property measurements and hydrogen permeability testing are underway to further assess the suitability of such composites for fusion reactor applications.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Packaging of an 8-kV Silicon Carbide Diode Module with Double-Side Cooling and Sintered-Silver Joints

Packaging innovations are needed for medium-voltage wide bandgap power semiconductor modules to enable their adaptation in grid applications. A unique challenge for packaging medium-voltage power modules is managing the trade-off between insulation demand and heat dissipation. The focus of this work was on developing a packaging innovation that improves the module heat dissipation and offers more flexibility to its insulation design. Two strategies were explored for the packaging of an 8-kV SiC diode rectifier module:(1) double-side cooling and (2) sintered-silver bonding. Double-side cooling was realized by using short metal posts rather than long and thin wire bonds for device interconnection, forming a low-profile package with devices sandwiched between two insulated metal substrates. Sintered-silver bonding enabled the devices to function reliably at over 250 °C. Simulations of the packaged module showed a low interconnect inductance of 2.67 nH and a 50% less heat transfer coefficient required to cool the chips. Prototypes of the module were fabricated, and preliminary electrical testing results validated the package design.

27 ARPA - Advanced Research Projects Agency-Energy↗
DOE OSTI2023

Ceria Incorporation in Sinter-Resistant Platinum-Based Catalysts

Platinum group metals (PGM) are widely used for exhaust emission abatement. Sintering during the high-temperature emission control conditions decreases noble metal utilization efficiency. Efficient use of scarce noble metals requires sinter-resistant catalysts. Here we extend an approach to synthesize catalysts consisting of platinum nanoparticles encapsulated in a mixture of cerium and aluminum oxides (Pt@Al 2 O 3 -CeO 2 ). We tested the activity of this catalyst toward carbon monoxide, propene, and propane oxidation chosen as model oxidation reactions for emission control catalysts. Pt@Al 2 O 3 -CeO 2 catalysts demonstrated similar activity and stability upon aging as the comparison system without ceria, Pt@Al 2 O 3 , while maintaining small Pt nanoparticles and ceria crystallites. Additionally, we studied the influence of various thermal treatments on CO oxidation activity and determined that a steam treatment can activate low temperature CO oxidation activity of Pt@Al 2 O 3 -CeO 2 . STEM-EDS analysis revealed that thermal treatments led to the co-location of Pt and CeO 2 and temperature programmed-reduction analysis revealed that the steam treatment specifically enhanced CO oxidation activity through surface reduction of the CeO 2 . As a result, we demonstrate the versatility of this encapsulation approach to generate mixed metal-oxide supports with improved metal-support interactions without hindering nanoparticle stability.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Nitrogen-doped carbon for selective pseudo-metal-free hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran: Importance of trace iron impurity

Heteroatoms-doped carbon materials have recently emerged as effective catalysts for various chemical and electrochemical reactions. The free of metals especially noble metals reduces cost and eliminates issues like sintering or leaching of metals at elevated temperatures in solvents. In this work, selective hydrodeoxygenation (HDO) of 5-hydroxymethylfurfural (HMF) to 2,5-dimethylfuran (DMF) is for the first time achieved over simple nitrogen-doped carbon (N-C) catalysts. Further, at optimal reaction conditions, a 91% yield of DMF is obtained with excellent catalyst stability. Extensive characterization, including extended X-ray absorption fine-structure (EXAFS) and soft X-ray absorption spectroscopy (sXAS), model reactions, basic data science analysis, and DFT calculations suggest that ppm of Fe in particular FeN 3 sites formed in pyrolysis, rather than non-metallic elements, drive key steps such as H 2 activation and deoxygenation of –OH during HMF HDO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Methods of forming near-net shape structures from non-stoichiometric oxides

A method of forming a near-net shape structure comprises forming a structure comprising non-stoichiometric metal oxide comprising at least one metal and less than a stoichiometric amount of oxygen, and electrochemically reducing the non-stoichiometric metal oxide in an electrochemical cell to form a structure having a near-net shape and comprising the at least one metal having less than about 1,500 ppm oxygen. Related methods of forming a non-stoichiometric metal oxide by sintering, annealing, or additive manufacturing, and forming a near-net shape structure from the non-stoichiometric metal oxide, as well as related electrochemical cells are also disclosed.

Tripathy, Prabhat K.↗
DOE OSTI2023

Adsorbate-Induced Strong Metal–Support Interactions: Implications for Catalyst Design

Since the discovery of strong metal–support interactions (SMSIs) over supported metal catalysts in the 1970s, researchers have studied ways to harness this type of catalyst reconstruction to achieve enhanced stability of metal particles against sintering and to create catalytic sites with novel electronic and bonding properties. The motivation to elucidate performance–structure relationships in catalytic transformations has led researchers to take a closer look into catalytic surfaces under reaction conditions rather than a postreaction analysis. These investigations of operating catalysts have made it clear that SMSIs are more common than initially thought. Recent reports show how various adsorbed species, rather than traditional H 2 /O 2 treatment, can promote SMSI in various catalytic systems, a phenomenon named adsorbate-induced SMSI (A-SMSI). Researching the occurrence of A-SMSI has allowed fundamental understanding of catalyst stability, catalytic rates, and product selectivity. The present Perspective discusses the state-of-the-art regarding A-SMSI, the current challenges, and the opportunities ahead in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Metal (Cu,Al)/CNT Composite Wires for Energy Efficient Motors

This report summarizes the main results of research project on Metal/CNT nanocomposites conducted at University of Central Florida (UCF). It should be noted that the project was budgeted for three years, but the budget period 3 was unfortunately not funded and conducted in COVID19 pandemic years due to many reasons. The demonstration plan on the small motors was also removed according to the discussion with the DOE program manager. All research activities were focused on the (Cu,Al)/CNT material development and wire extrusion. Existing methods to fabricate Metal/CNTs were usually suffering from agglomeration of CNTs due to their density and stiffness differences. A new method is studied by the UCF research team, where CNTs are surface treated firstly, then coated with pure metals (i.e., Al, Cu, and Nickle). The metal encapsulation on CNT is expected to significantly improve the interfacial bonding between CNTs and the intimated metal matrices. The coated CNT powders were used to make sample materials through sintering, then a customized wire extrusion process was employed to fabricate wires. Measurement of material property improvements in mechanical strength, thermal conductivity, and electrical conductivity were conducted on both cylinder samples and extruded wires. In addition to the sintering process, casting on metal coated CNT powder was also investigated. The best results we achieved are summarized as follows. (1) The measured thermal conductivity of Al/CNT composite made with Ni-encapsulated CNTs and pure Al powders is about 85% better than that of pure aluminum fabricated. The measured electrical conductivity of fabricated Al/CNT is about 14-20% better than that of pure aluminum. (2) The measured electrical conductivity of Cu/CNT is about 14.5% better than that of pure copper fabricated. (3) The mechanical strengths of both Cu/CNT and Al/CNT (with about 1% wt. CNTs) are 70% better than pure metals although losing some material ductility. (4) Two-stage wire extrusion at high temperatures were designed and successfully conducted to fabricate wires of Metal/CNTs.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Size-Dependent Adsorption and Adhesion Energetics of Ag Nanoparticles on Graphene Films on Ni(111) by Calorimetry

Interest in the use of carbon supports for late transition metal nanoparticle catalysts has expanded rapidly due to the increasing importance of electrocatalysts for clean energy and environmental technologies and the use and storage of renewable electricity. Compared to oxide supports, almost nothing is known about the effect of metal nanoparticle size on the energies of the metal atoms within carbon-supported nanoparticles, yet these energies are crucial for understanding their surface reactivity and sintering kinetics. Here, the growth morphology and adsorption energetics of vapor-deposited Ag onto clean graphene/Ni(111) surfaces have been studied using a combination of single-crystal adsorption calorimetry (SCAC) and He + low-energy ion scattering (LEIS). The differential heat of Ag adsorption is 207 kJ/mol for making ~30 atom Ag particles on graphene terraces at 100 K and 16 kJ/mol higher for making ~9 atom Ag clusters at defect sites at the same temperature. The heat of adsorption increases rapidly with Ag coverage as 3D Ag nanoparticles nucleate and grow in size, asymptotically reaching within 5 kJ/mol of the bulk Ag sublimation enthalpy (285 kJ/mol) by 2 ML. The heats of adsorption and Ag nanoparticle densities from LEIS (~10 16 /m 2 ) were combined to provide the Ag/graphene adhesion energy (E adh = 1.8 J/m 2 in the large-particle limit) and the Ag chemical potential (μ) versus effective particle diameter (D). The Ag chemical potential was well-fitted by μ(D) = (3γ v /M – E adh )(1 + (1.5 nm)/D)(2V m /D), where γ v /M is the surface energy of bulk Ag and V m is its molar volume. The same equation is known to fit similar data for late transition metals on clean surfaces of metal oxide single crystals. The adhesion energy of Ag measured here on graphene falls within the wide range measured for Ag on those oxide surfaces and is almost as large as on the oxide that binds Ag particles most strongly, namely CeO 2 (111), which is well-known to be very effective at resisting catalyst deactivation by metal sintering. Furthermore, these results imply that carbon supports will be effective at resisting sintering and that Ag particles smaller than 6 nm on graphene will bind small adsorbed reaction intermediates more weakly than supports with weaker adhesion to Ag, like MgO(100).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Reduced-temperature sintering of spinel-type coatings and layers with metallic alloy powder precursors

A method of forming a spinel coating on a substrate is disclosed including the steps of coating at least a portion of the substrate with a precursor including an alloy powder, and sintering the precursor at a temperature of less than 1000 degrees Celsius to form the spinel coating. The alloy powder used for the precursor can include particles having a particle size of less than 10 micrometers. The method can be utilized to form spinel coatings as contact surfaces between electrodes and interconnects of solid oxide fuel cell (SOFC) stacks.

Zhu, Jiahong↗