Search NASA⌕ Search

SEARCH · Search NASA

Results for “microelectronic structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

SnSe 1-x S x Alloys: Anisotropic Van der Waals Semiconductors with Tunable Bandgaps

Alloying is one of the main tools of bandgap engineering, allowing the tuning of crystal structure, lattice parameters, and electronic structure of 3D and 2D/layered semiconductors. Among the latter, it can play a key role in tailoring the properties of tin monochalcogenides, a class of van der Waals semiconductors of interest for optoelectronics, thermoelectrics, ferroelectrics, and valleytronics. Here, the study investigates the synthesis and properties of large flakes of the anion substitution alloys SnSe 1-x S x . Alloy flakes across a wide range of compositions are obtained systematically by repeated growth from the same mixed (SnS, SnSe) powder precursor. Combined experiment and theory show full miscibility for all compositions, along with tunable lattice constants, bandgaps, and vibrational modes. Atomic resolution imaging demonstrates the accumulation of S and Se in alternating layers in the SnSe 1-x S x unit cell, attributed to growth kinetics. Polarized Raman spectroscopy confirms anisotropic vibrational modes; the calculated and measured band structure shows systematic changes in the band edge energies and anisotropic electronic structure due to the anisotropic in-plane lattice of the monochalcogenides. Cathodoluminescence, finally, indicates that a unique configuration of two non-degenerate, direct valleys along orthogonal k-space directions persists all the way from SnS to SnSe, making SnSe 1-x S x alloys interesting for valleytronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Chiral Spin Textures in Amorphous Iron–Germanium Thick Films

Topological solitary fields, such as magnetic and polar skyrmions, are envisioned to revolutionize microelectronics. These configurations have been stabilized in solid-state materials with a global inversion symmetry breaking, which translates in magnetic materials into a vector spin exchange known as the Dzyaloshinskii-Moriya interaction (DMI), as well as spin chirality selection and isotropic solitons. This work reports experimental evidence of 3D chiral spin textures, such as helical spins and skyrmions with different chirality and topological charge, stabilized in amorphous Fe-Ge thick films. Overall, these results demonstrate that structurally and chemically disordered materials with a random DMI can resemble inversion symmetry broken systems with similar magnetic properties, moments, and states. Disordered systems are distinguished from systems with global inversion symmetry breaking by their degenerate spin chirality that allows for forming isotropic and anisotropic topological spin textures at remanence, while offering greater flexibility in materials synthesis, voltage, and strain manipulation.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Ferroelectric phase transition in group-IV monochalcogenides from an equivariant machine learned force field

Group-IV monochalcogenides are a class of layered ferroelectric semiconductors that have demonstrated spontaneous intrinsic polarization above room temperature. Here, in this study, we use the multi-atomic cluster expansion (MACE) machine learning architecture to train and test a force field capable of modeling the structural properties and second-order ferroelectric-to-paraelectric phase transition in a Group-IV monochalcogenide, GeSe. The model captures the double-well potential energy surface associated with the onset of macroscopic polarization in bulk GeSe within 12.5 meV/atom, as well as near-equilibrium properties like the phonon dispersion. The development of this quantitatively accurate force field enables long-time molecular dynamics simulations, which predict the critical temperature of the ferroelectric-to-paraelectric phase transition in bulk GeSe to be T c = 600 K. This study demonstrates the capabilities of equivariant force-fields to accurately describe phenomena associated with structural symmetry breaking.

ferroelectricity↗
DOE OSTI2025

In Situ Atomic Tracking on the Interfacial Etching and Reconfiguration of Cu-ReSe 2 Contact during Thermal Annealing

The Schottky barrier height can be greatly affected by the metal diffusion, reaction, and covalent bonding formation at the contact. Exploring novel methods and revealing the fundamental mechanisms for contact engineering are of vital importance for microelectronic devices. Here, in this study, the annealing induced interfacial reactions at Cu-ReSe 2 contact are dynamically revealed from the atomic scale. Accompanied by the diffusion of Se to Cu, ReSe 2 is gradually decomposed to a thin Re interlayer through a “chain-by-chain” manner. Theoretical calculations show that the Cu atoms can facilitate the chemical bond breaking of ReSe 2 , significantly lowering the Se diffusion energy barrier toward Cu. The formed Re/ReSe 2 heterostructure presents a metal-like band structure, which underscores the critical role of Cu in altering the interfacial chemistry and promoting carrier transport across the interface. Our results can provide vital insights into the contact properties of ReSe 2 and provide a possible method for fabricating high-performance ReSe 2 -based devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Two-Dimensional Silk Crystal Films as Matrix Layer for High-Performance Microelectronics

This study explores a bio-inspired approach for memristive devices by combining Keggin-type polyoxometalates (POMs)-[SiW 12 O 40 ] 4 (POM-T) and [PW 12 O 40 ] 3 (POM-P), with silk fibroin (SF) to create 2D SF–POM layers on highly ordered pyrolytic graphite (HOPG) as resistive switching layers for memristors. We propose that the ordered SF layer template 0D POMs facilitate the formation of conductive filaments, thereby enhancing the variability of the manufactured memristors. AFM analysis revealed that both SF and SF–POM layers shared similar morphologies, while SF–POM–T formed larger aggregates, likely due to the stronger acidity of POM-T, which probably caused SF to aggregate and alter its secondary structure. Scanning Kelvin probe microscopy (SKPM) revealed that POMs reduced the contact potential difference of HOPG, resulting in lower work functions. Compared to an SF device, the SF–POM–P device showed improved memristive behavior, with a larger current gap and good repeatability over multiple sweeps; whereas the SF–POM–T device did not exhibit memristor activity, likely due to acidity-induced disruption of the SF template’s order and CF formation. More importantly, SF–POM–P devices also demonstrated programmable memristive states. Finally, combining simulation-driven memristor modeling, we showcase a co-design workflow for advancing bioinspired memristors through new materials design, synthesis, and device modeling and development.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Candidate ferroelectrics via ab initio high-throughput screening of polar materials

Ferroelectrics are a class of polar and switchable functional materials with diverse applications, from microelectronics to energy conversion. Computational searches for new ferroelectric materials have been constrained by accurate prediction of the polarization and switchability with electric field, properties that, in principle, require a comparison with a nonpolar phase whose atomic-scale unit cell is continuously deformable from the polar ground state. For most polar materials, such a higher-symmetry nonpolar phase does not exist or is unknown. Here, we introduce a general high-throughput workflow that screens polar materials as potential ferroelectrics. We demonstrate our workflow on 1978 polar structures in the Materials Project database, for which we automatically generate a nonpolar reference structure using pseudosymmetries, and then compute the polarization difference and energy barrier between polar and nonpolar phases, comparing the predicted values to known ferroelectrics. Focusing on a subset of 182 potential ferroelectrics, we implement a systematic ranking strategy that prioritizes candidates with large polarization and small polar-nonpolar energy differences. To assess stability and synthesizability, we combine information including the computed formation energy above the convex hull, the Inorganic Crystal Structure Database id number, a previously reported machine learning-based synthesizability score, and ab initio phonon band structures. To distinguish between previously reported ferroelectrics, materials known for alternative applications, and lesser-known materials, we combine this ranking with a survey of the existing literature on these candidates through Google Scholar and Scopus databases, revealing ~130 promising materials uninvestigated as ferroelectric. Our workflow and large-scale high-throughput screening lays the groundwork for the discovery of novel ferroelectrics, revealing numerous candidates materials for future experimental and theoretical endeavors.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Phase Diagrams and Piezoelectric Properties of Wurtzite Al1-x-yScxGdyN Heterostructural Alloys

Ternary nitride alloys based on wurtzite AlN are a promising platform to realize functional materials, particularly ferroelectrics and optical emitters, that can smoothly integrate with conventional microelectronics. Here, a strategic design is presented to enable multifunctional materials by substituting multiple elements into AlN to create quaternary nitride alloys. By combining computational predictions and combinatorial thin film synthesis, the phase diagram of these quaternary Al-Sc-Gd-N alloys (or pseudo-ternary heterostructural AlN-ScN-GdN alloys) is successfully predicted as a function of effective temperature, and we experimentally grow Al1-x-xScxGdyN thin films for the first time. It is revealed that Al1-x-xScxGdyN crystallizes in a wurtzite-derived structure for X + y <~ 0.35, consistent with the calculated phase diagram. The computational investigation explores whether co-substitution induces cooperative effects on these alloys' piezoelectric and ferroelectric properties, finding that it is beneficial for reducing the polarization switching barrier. We calculate that Al1-x-xScxGdyN thin films should display ferroelectric switching. This is supported by our experimental measurements of a high optical bandgap, enhanced piezoelectric coefficient, and a change in the calculated polarization switching mechanism, and we achieve preliminary ferroelectric switching that experimentally realizes the prediction. Overall, our work sets the foundation toward quaternary wurtzite-nitride-based multifunctional materials, including piezoelectrics, ferroelectrics, and possibly even multiferroics.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Group IV topological quantum alloy and the role of short-range order: the case of Ge-rich Ge 1– x Pb x

Despite the explosion of interest in topological materials over the last decades, their applications remain limited due to challenges in growth and incorporation with today’s microelectronics. As a potential bridge to close this gap, we investigate the group-IV alloy Ge 1–x Pb x , in the Ge-rich condition using density functional theory and show that relatively low concentrations of Pb (~9.4%) can lead to a topological phase transition. Furthermore, the calculation of the Z 2 invariant for both the random alloy and the alloy with short-range order (SRO) indicate that the topological phase of the material can be directly modified by the degree of SRO. These findings are understood in terms of local structural relaxation, which decreases the bandgap in the random alloy. However, in the SRO case, the mutual avoidance of Pb leads to minimal structural relaxation, alleviating strain. Our findings not only highlight the emerging importance of SRO in alloy properties but also indicate the possibility of constructing topological interfaces between materials of identical composition (and nominally identical structure). Moreover, they uncover a viable avenue toward the monolithic integration of quantum materials with today’s semiconductor industry.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Aerosol-Jet Printed Transferable Millimeter-Wave Circuits

Printed millimeter wave (mmW) electronics have been of high interest in the field of communications for some time now due to the potential ability to fabricate mmW systems that utilize 3-Dimension Heterogeneous Integration (3DHI) to improve performance beyond traditional systems. Here, in this paper, a method for fabricating transferable mmW structures via aerosol-jet printing (AJP) is presented. A PDMS stamp assisted liftoff procedure is developed to separate the printed part from a rigid printing support surface and apply it to an adhesive target surface. Several microstrip (MS) line structures are demonstrated to characterize the effect of stamp transfer on the RF performance of the printed circuits. The effects of printed vias on RF probe pads and shifts in the resonant frequencies of a Beatty standard line after transfer are considered and characterized using S-parameter measurements.

42 ENGINEERING↗
DOE OSTI2022

Reconfigurable Intelligent Surfaces Empowered THz Communication in LEO Satellite Networks

Massive swarms of low Earth orbit (LEO) satellites are poising to serve for high-speed and low-latency ubiquitous connectivity with almost global coverage. Broadband inter-satellite communication is one of the key elements of satellite communication systems that orchestrate massive satellite swarms in cooperation. Thanks to technological advancements in microelectronics and micro-systems, the terahertz (THz) band has emerged as a strong candidate for inter-satellite links (ISLs) due to its promise of wideband communication. Especially, multi-antenna systems can improve the system performance along with the wideband supported by the THz band. However, multi-antenna systems should be reconsidered due to their size, weight, and price/power (SWaP) constraints. On the other hand, as a state-of-art multi-antenna technology, reconfigurable intelligent surface (RIS) is able to relax SWaP constraints because of its passive component-based structures. However, as similar reflection characteristic throughout wideband is difficult to meet, it is possible to observe beam misalignment. In this work, we first provide an assessment of the use of the THz band for ISLs and quantify the impact of misalignment fading on error performance. Then, in order to compensate for the high path loss associated with high carrier frequencies, and to further improve the signal-to-noise ratio (SNR), we propose the use of RISs mounted on neighboring satellites to enable signal propagation. Based on a mathematical analysis of the problem, we present the error rate expressions for RIS-assisted ISLs with misalignment fading. Also, numerical results show that RIS can leverage the error rate performance and achievable capacity of THz ISLs.

reconfigurable intelligent surfaces (RISs)↗
DOE OSTI2021

A New Route to Quantum-Scale Structures through a Novel Enhanced Germanium Diffusion Mechanism

This project sought to develop a fundamental understanding of the mechanisms underlying a newly observed enhanced germanium (Ge) diffusion process in silicon germanium (SiGe) semiconductor nanostructures during thermal oxidation. Using a combination of oxidationdiffusion experiments, high resolution imaging, and theoretical modeling, a model for the enhanced Ge diffusion mechanism was proposed. Additionally, a nanofabrication approach utilizing this enhanced Ge diffusion mechanism was shown to be applicable to arbitrary 3D shapes, leading to the fabrication of stacked silicon quantum dots embedded in SiGe nanopillars. A new wet etch-based method for preparing 3D nanostructures for highresolution imaging free of obscuring material or damage was also developed. These results enable a new method for the controlled and scalable fabrication of on-chip silicon nanostructures with sub-10 nm dimensions needed for next generation microelectronics, including low energy electronics, quantum computing, sensors, and integrated photonics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Development of data‐driven exponential integrators with application to modeling of delay photocurrents

Abstract Radiation‐induced photocurrent effects represent a threat to microelectronic components operating in space, manmade and terrestrial radiation environments. Analysis of these threats by circuit simulations requires accurate and computationally efficient compact models. Most existing compact models are based on closed form analytic solutions of the governing equations and require empirical assumptions and idealizations that can limit their validity. In this paper we formulate an alternative numerical, data‐driven approach that learns a compact model from data representative of the type of measurements one can obtain in an experimental facility. To develop the model we start from a generic discrete‐time dynamical system and then use physics knowledge to refine its structure. Numerical studies demonstrate the potential of the model and establish some empirical guidelines for its training.

Bochev, Pavel↗
DOE OSTI2020

Phase-Exchange-Driven Wake-Up and Fatigue in Ferroelectric Hafnium Zirconium Oxide Films

Ferroelectric hafnium zirconium oxide holds great promise for a broad spectrum of complementary metal–oxide–semiconductor (CMOS) compatible and scaled microelectronic applications, including memory, low-voltage transistors, and infrared sensors, among others. An outstanding challenge hindering the implementation of this material is polarization instability during field cycling. Herein, the nanoscale phenomena contributing to both polarization fatigue and wake-up are reported. Using synchrotron X-ray diffraction, the conversion of non-polar tetragonal and polar orthorhombic phases to a non-polar monoclinic phase while field cycling devices comprising noble metal contacts is observed. This phase exchange accompanies a diminishing ferroelectric remanent polarization and provides device-scale crystallographic evidence of phase exchange leading to ferroelectric fatigue in these structures. A reduction in the full width at half-maximum of the superimposed tetragonal (101) and orthorhombic (111) diffraction reflections is observed to accompany wake-up in structures comprising tantalum nitride and tungsten electrodes. Combined with polarization and relative permittivity measurements, the observed peak narrowing and a shift in position to lower angles is attributed, in part, to a phase exchange of the non-polar tetragonal to the polar orthorhombic phase during wake-up. These results provide insight into the role of electrodes in the performance of hafnium oxide-based ferroelectrics and mechanisms driving wake-up and fatigue, and demonstrate a non-destructive means to characterize the phase changes accompanying polarization instabilities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

High entropy ceramics for applications in extreme environments

Abstract Compositionally complex materials have demonstrated extraordinary promise for structural robustness in extreme environments. Of these, the most commonly thought of are high entropy alloys, where chemical complexity grants uncommon combinations of hardness, ductility, and thermal resilience. In contrast to these metal–metal bonded systems, the addition of ionic and covalent bonding has led to the discovery of high entropy ceramics (HECs). These materials also possess outstanding structural, thermal, and chemical robustness but with a far greater variety of functional properties which enable access to continuously controllable magnetic, electronic, and optical phenomena. In this experimentally focused perspective, we outline the potential for HECs in functional applications under extreme environments, where intrinsic stability may provide a new path toward inherently hardened device design. Current works on high entropy carbides, actinide bearing ceramics, and high entropy oxides are reviewed in the areas of radiation, high temperature, and corrosion tolerance where the role of local disorder is shown to create pathways toward self-healing and structural robustness. In this context, new strategies for creating future electronic, magnetic, and optical devices to be operated in harsh environments are outlined.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Dynamic asymmetric strain imprinted into substrates by an oxide thin film

In film-substrate systems, the substrate role is often considered to be limited to providing static mechanical constraints. Dynamic film-substrate interactions when a structural change in the film modifies the substrate are generally disregarded. Here, using combined x-ray and electron microscopies, we observed that an electrically induced filament in a vanadium dioxide film created strong asymmetric strain in an underlying sapphire substrate. This asymmetric substrate strain fed back into the film and defined the filament expansion direction, revealing the importance of film-substrate dynamic interactions in determining film functionality. Furthermore, the strain imprint propagated at least tens of micrometers deep into the substrate, exceeding the film thickness by more than 200-fold, potentially enabling substrate functionalization as an active mechanical coupling media in three-dimensional integrated microelectronic architectures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Probing electronic and dielectric properties of ultrathin Ga 2 O 3 /Al 2 O 3 atomic layer stacks made with in vacuo atomic layer deposition

Ultrathin (1–4 nm) films of wide-bandgap semiconductors are important to many applications in microelectronics, and the film properties can be sensitively affected by defects especially at the substrate/film interface. Motivated by this, an in vacuo atomic layer deposition (ALD) was developed for the synthesis of ultrathin films of Ga 2 O 3 /Al 2 O 3 atomic layer stacks (ALSs) on Al electrodes. It is found that the Ga 2 O 3 /Al 2 O 3 ALS can form an interface with the Al electrode with negligible interfacial defects under the optimal ALD condition whether the starting atomic layer is Ga 2 O 3 or Al 2 O 3 . Such an interface is the key to achieving an optimal and tunable electronic structure and dielectric properties in Ga 2 O 3 /Al 2 O 3 ALS ultrathin films. In situ scanning tunneling spectroscopy confirms that the electronic structure of Ga 2 O 3 /Al 2 O 3 ALS can have tunable bandgaps (E g ) between ~2.0 eV for 100% Ga 2 O 3 and ~3.4 eV for 100% Al 2 O 3 . With variable ratios of Ga:Al, the measured E g exhibits significant non-linearity, agreeing with the density functional theory simulation, and tunable carrier concentration. Furthermore, the dielectric constant of ultrathin Ga 2 O 3 /Al 2 O 3 ALS capacitors is tunable through the variation in the ratio of the constituent Ga 2 O 3 and Al 2 O 3 atomic layer numbers from 9.83 for 100% Ga 2 O 3 to 8.28 for 100% Al 2 O 3 . The high ε leads to excellent effective oxide thickness ~1.7–2.1 nm for the ultrathin Ga 2 O 3 /Al 2 O 3 ALS, which is comparable to that of high-K dielectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Adhesively Bonded Copper and Polyimide for Flexible Printed Circuit Boards: A Data-Driven Degradation Study Under Accelerated Aging

The long-term durability of polyimide laminated adhesive based flexible printed circuit boards (PCBs) is critical to the microelectronics industry. The interface of the adhesive layer binding the polyimide and copper layers is particularly vulnerable since decreased bonding strength can lead to deadhesion, performance loss, and premature device failure. Here, in this study, adhesive-bonded polyimide and copper samples are subjected to 1000 h of damp heat exposure (85 °C/85%RH) to evaluate the impact of moisture and copper inclusion on the adhesive bonding performance. Significant copper diffusion through the adhesive layer is observed, which, combined with moisture uptake, is found to substantially weaken interfacial adhesion in copper-containing samples, thereby reducing device lifetime. Observed surface and bulk material changes are correlated to adhesion strength using the network structural equation modeling (netSEM) approach, resulting in a robust predictive model of performance degradation based on measurable materials properties.

Chemistry↗
DOE OSTI2024

Direct Synthesis of Layer-Tunable and Transfer-Free Graphene on Device-Compatible Substrates Using Ion Implantation Toward Versatile Applications

Direct synthesis of layer-tunable and transfer-free graphene on technologically important substrates is highly valued for various electronics and device applications. State of the art in the field is currently a two-step process: a high-quality graphene layer synthesis on metal substrate through chemical vapor deposition (CVD) followed by delicate layer transfer onto device-relevant substrates. Here, we report a novel synthesis approach combining ion implantation for a precise graphene layer control and dual-metal smart Janus substrate for a diffusion-limiting graphene formation to directly synthesize large area, high quality, and layer-tunable graphene films on arbitrary substrates without the post-synthesis layer transfer process. Carbon (C) ion implantation was performed on Cu–Ni film deposited on a variety of device-relevant substrates. A well-controlled number of layers of graphene, primarily monolayer and bilayer, is precisely controlled by the equivalent fluence of the implanted C-atoms (1 monolayer ~4 × 10 15 C-atoms/cm 2 ). Upon thermal annealing to promote Cu-Ni alloying, the pre-implanted C-atoms in the Ni layer are pushed toward the Ni/substrate interface by the top Cu layer due to the poor C-solubility in Cu. As a result, the expelled C-atoms precipitate into a graphene structure at the interface facilitated by the Cu-like alloy catalysis. After removing the alloyed Cu-like surface layer, the layer-tunable graphene on the desired substrate is directly realized. The layer-selectivity, high quality, and uniformity of the graphene films are not only confirmed with detailed characterizations using a suite of surface analysis techniques but more importantly are successfully demonstrated by the excellent properties and performance of several devices directly fabricated from these graphene films. Molecular dynamics (MD) simulations using the reactive force field (ReaxFF) were performed to elucidate the graphene formation mechanisms in this novel synthesis approach. With the wide use of ion implantation technology in the microelectronics industry, this novel graphene synthesis approach with precise layer-tunability and transfer-free processing has the promise to advance efficient graphene-device manufacturing and expedite their versatile applications in many fields.

36 MATERIALS SCIENCE↗