Search NASA⌕ Search

SEARCH · Search NASA

Results for “microwave conductivity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

A multi-frequency measurement of thermal microwave emission from soils: The effects of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July - September of 1981. Three bare fields with different surface roughnesses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depths of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz.

Wang, J. R.↗
NASA NTRS1982

A multi-frequency measurement of thermal microwave emission from soils - The effect of soil texture and surface roughness

An experiment on remote sensing of soil moisture content was conducted over bare fields with microwave radiometers at the frequencies of 1.4 GHz, 5 GHz, and 10.7 GHz during July September of 1981. Three bare fields with different surface roughneses and soil textures were prepared for the experiment. Ground truth acquisition of soil temperatures and moisture contents for 5 layers down to the depth of 15 cm was made concurrently with radiometric measurements. The experimental results show that the effect of surface roughness is to increase the soils' brightness temperature and to reduce the slope of regression between brightness temperature and moisture content. The slopes of regression for soils with different textures are found to be comparable, and the effect of soil texture is reflected in the difference of regression line intercepts at brightness temperature axis. The result is consistent with laboratory measurement of soils' dielectric permittivity. Measurements on wet smooth bare fields give lower brightness temperatures at 5 GHz than at 1.4 GHz. Previously announced in STAR as N82-24550

Wang, J. R.↗
NASA NTRS1980

Airborne microwave radiometer remote sensing of lake ice

The NASA Langley C-Band Stepped Frequency Microwave Radiometer was used to conduct airborne remote sensing measurements of the Great Lakes ice cover during the winters of 1978 and 1979. In order to evaluate the use of microwave radiometry for remote sensing of fresh water ice, an initial experiment was conducted in February 1978. After the results were analyzed an algorithm was developed, and a more comprehensive mission was completed in March 1979, which related the thermal emission from lake ice to meaningful geophysical quantities. A clear discrimination of pressure ridges and rubble from base ice was observed, and evidence was found which showed gradual changes in the thickness of the base itself. Results indicate that passive microwave sensors can provide a measure of lake ice within uncertainties presented by the attenuation coefficient, and the changes in surface reflectivity imposed by surface roughness.

Swift, C. T.↗
NASA NTRS1977

Microwave radiometry for soil moisture sensing

Investigations have been conducted with truck-mounted radiometers to study the variation of microwave emissivity from a soil. It was found that the longer wavelength radiometers, (21 cm), are preferable for the remote sensing of soil moisture. Aircraft observations indicated a nonlinear dependence of microwave brightness temperature on soil moisture. The dielectric constants of soils are considered along with the radiative transfer in soils, and soil water characteristics. A description is presented of test flights conducted with a NASA aircraft, taking into account soil moisture measurements and instrumentation. The obtained results show that the surface emissivity of a soil is determined by the dielectric properties of the surface soil layer a few tenths of a wavelength thick while the thermal sampling depths are much greater. The capability of the 21-cm radiometer to sense soil-moisture variations through a moderate vegetation canopy, and the promising Skylab results encourage consideration of a radiometer operating at this wavelength for routine soil moisture observations.

Schmugge, T.↗
NASA NTRS1990

Propagation of high-power microwave pulses in air breakdown environment

A chamber experiment is conducted to study the propagation of high-power microwave pulses through the air. Two mechanisms responsible for two different degrees of tail erosion have been identified experimentally. The optimum pulse amplitude for maximum energy transfer through the air has also been determined.

Kuo, S. P.↗
NASA NTRS1991

Measurement of cavity perturbation to determine the microwave absorption of a sphere in a single mode resonator

Experiments have been conducted on materials in a single mode microwave resonator to test predictions of a new theory of microwave absorption by a lossy dielectric sphere. An analysis of cavity perturbation for verifying the new absorption model revealed a limitation of a standard form of cavity perturbation theory and led to a modification which generalized its application. The cavity perturbations of a nylon sphere were used to calculate the complex permittivity using the standard perturbation theory and the modified form. These permittivity values were compared to that determined from cavity perturbation using a thin nylon rod where the standard and modified forms agree. The results show that the modification is necessary to correctly apply perturbation theory to spherical samples. A second experiment confirmed the theoretical prediction that under certain sample conditions the power absorbed by a sphere in a resonant cavity can be maximum at a location in the cavity where the empty cavity electric field intensity is a minimum.

Watkins, J. L.↗
NASA NTRSDate not supplied

Amplifier Output Power, Gain, Efficiency, and Bandwidth: A Comparative Study of GaN HEMT MMIC Multi-Stage Power Amplifiers versus Distributed Power Amplifiers

In this paper we present first, the results of a study conducted to investigate the microwave performance of a wideband (25-31 GHz) GaN MMIC distributed high power amplifier (HPA). Second, we compare and contrast the above performance with that of an alternate architecture that relies on two HPAs to provide contiguous 25-31 GHz coverage. The two HPAs operate across 25-28 GHz and 27-31 GHz, respectively, and can be switched in and out depending on the need at any given time. The parameters investigated includes the output power, gain, power added efficiency, bandwidth, RMS error vector magnitude for offset-QPSK, 8PSK, 16APSK, and 32 APSK waveforms, 3rd-order intermodulation distortion products, noise figure, and single sideband phase noise.

MMIC↗
NASA NTRS1981

Observations of solar filaments at 8, 15, 22 and 43 GHz

Radio depressions frequently appear broader than their associated H-alpha filaments and often persist after a filament disappears. The reported study is concerned with the relative contributions of filament and the filament channel to the depth of radio depressions. Although the contribution cannot readily be determined in an individual case, the apportionment can be assessed statistically by extensive multi-frequency observations of many filaments and channels using the same telescope over a period of days. In principle it is possible to determine the evolution, geometry, and physical properties of filaments and filament channels with a widely based set of radio observations. It is found that all but a few percent of the microwave depressions lie on magnetic neutral lines or their natural extensions. The only possible exceptions are coronal holes on the disk, which are small or non-existent during the period of the conducted observations. The diversity of microwave filaments is striking. Even quiescent filaments show considerable variation.

Schmahl, E. J.↗
NASA NTRS1992

Multifrequency passive microwave observations of soil moisture in an arid rangeland environment

A cooperative experiment was conducted by teams from the U.S. and U.S.S.R. to evaluate passive microwave instruments and algorithms used to estimate surface soil moisture. Experiments were conducted as part of an interdisciplinary experiment in an arid rangeland watershed located in the southwest United States. Soviet microwave radiometers operating at wavelengths of 2.25, 21 and 27 cm were flown on a U.S. aircraft. Radio frequency interference limited usable data to the 2.25 and 21 cm systems. Data have been calibrated and compared to ground observations of soil moisture. These analyses showed that the 21 cm system could produce reliable and useful soil moisture information and that the 2.25 cm system was of no value for soil moisture estimation in this experiment.

Jackson, T. J.↗
NASA NTRS2000

High-Temperature Superconductive Cabling Investigated for Space Solar Power Satellites

NASA has been directed by Congress to take a fresh look at the Space Solar Power (SSP) concept that was studied by the Department of Energy and NASA about 20 years ago. To summarize, the concept involves (1) collecting solar energy and converting it to electrical energy via photovoltaic arrays on satellites in Earth orbit, (2) conducting the electricity to the microwave transmitting portion of the satellite, and (3) transmitting the power via microwave transmitters (or possibly via lasers) to ground power station antennas located on the surface of the Earth. One Sun Tower SSP satellite concept is illustrated here. This figure shows many photovoltaic arrays attached to a "backbone" that conducts electricity down to a wireless transmitter, which is pointed toward the Earth. Other variations on this concept use multiple backbones to reduce the overall length of the satellite structure. In addition, non-Sun-Tower concepts are being considered. The objective of the work reported here was to determine the benefits to the SSP concept of using high-temperature superconductors (HTS) to conduct the electricity from the photovoltaic arrays to the wireless power transmitters. Possible benefits are, for example, reduced mass, improved efficiency, and improved reliability. Dr. James Powell of Plus Ultra Technologies, Inc., of Stony Brook, New York, is conducting the study, and it is being managed by the NASA Glenn Research Center at Lewis Field via a task-order contract through Scientific Applications International Corp. (SAIC).

Tew, Roy C.↗
NASA NTRS1974

Dual frequency microwave radiometer measurements of soil moisture for bare and vegetated rough surfaces

Controlled ground-based passive microwave radiometric measurements on soil moisture were conducted to determine the effects of terrain surface roughness and vegetation on microwave emission. Theoretical predictions were compared with the experimental results and with some recent airborne radiometric measurements. The relationship of soil moisture to the permittivity for the soil was obtained in the laboratory. A dual frequency radiometer, 1.41356 GHz and 10.69 GHz, took measurements at angles between 0 and 50 degrees from an altitude of about fifty feet. Distinct surface roughnesses were studied. With the roughness undisturbed, oats were later planted and vegetated and bare field measurements were compared. The 1.4 GHz radiometer was less affected than the 10.6 GHz radiometer, which under vegetated conditions was incapable of detecting soil moisture. The bare surface theoretical model was inadequate, although the vegetation model appeared to be valid. Moisture parameters to correlate apparent temperature with soil moisture were compared.

Lee, S. L.↗
NASA NTRS1991

Simulation of intense microwave pulse propagation in air breakdown environment

An experiment is conducted to examine the tail erosion phenomenon which occurs to an intense microwave pulse propagating in air breakdown environment. In the experiment, a 1 MW microwave pulse (1.1 microsec) is transmitted through a large plexiglas chamber filled with dry air at about 1-2 torr pressure. Two different degrees of tail erosion caused by two different mechanisms are identified. This experimental effort leads to the understanding of the fundamental behavior of tail erosion and provides a data base for validating the theoretical model. A theoretical model based on two coupled partial differential equations is established to describe the propagation on an intense microwave pulse in air breakdown environment. One is derived from the Poynting theorem, and the other one is the rate equation of electron density. A semi-empirical formula of the ionization frequency is adopted for this model. A transformation of these two equations to local time frame of reference is introduced so that they can be solved numerically with considerably reduced computation time. This model is tested by using it to perform the computer simulation of the experiment. The numerical results are shown to agree well with the experimental results.

Kuo, S. P.↗
NASA NTRS1994

Coaxial microwave electrothermal thruster performance in hydrogen

The microwave electro thermal thruster (MET) is an electric propulsion concept that offers the promise of high performance combined with a long lifetime. A unique feature of this electric propulsion concept is its ability to create a microwave plasma discharge separated or floating away from any electrodes or enclosing walls. This allows propellant temperatures that are higher than those in resistojets and reduces electrode and wall erosion. It has been demonstrated that microwave energy is coupled into discharges very efficiently at high input power levels. As a result of these advantages, the MET concept has been identified as a future high power electric propulsion possibility. Recently, two additional improvements have been made to the coaxial MET. The first was concerned with improving the microwave matching. Previous experiments were conducted with 10-30 percent reflected power when incident power was in excess of 600 W(exp 6). Power was reflected back to the generator because the impedance of the MET did not match the 50 ohm impedance of the microwave circuit. To solve this problem, a double stub tuning system has been inserted between the MET and the microwave power supply. The addition of the double stub tuners reduces the reflected power below 1 percent. The other improvement has prepared the coaxial MET for hydrogen experiments. To operate with hydrogen, the vacuum window which separates the coaxial line from the discharge chamber has been changed from teflon to boron nitride. All the microwave energy delivered to the plasma discharge passes through this vacuum window. This material change had caused problems in the past because of the increased microwave reflection coefficients associated with the electrical properties of boron nitride. However, by making the boron nitride window electrically one-half of a wavelength long, power reflection in the window has been eliminated. This technical note summarizes the experimental performance of the improved coaxial MET when operating in nitrogen, helium, and hydrogen gases.

Richardson, W.↗
NASA NTRS1986

Flying complex approach paths using the microwave landing system

A piloted simulation study was conducted to examine the requirements for using electromechanical flight instrumentation to provide guidance for manually controlled flight along complex, curved approach paths within the microwave landing system signal coverage. The data from these tests indicated that flight director guidance is required for the manually controlled flight of a jet transport airplane on complex, curved approach paths. Each of the three guidance algorithms tested could be used to fly the paths. However, pilot comments indicated that the use of guidance based on capturing the next straight path segment may not be acceptable since full-scale lateral deflections normally resulted during turns. Pilot comments indicated that all the approach paths tested could be used in normal airline operations. Approach paths with both multiple, sequential turns and short final path segments were demonstrated.

Knox, Charles E.↗
NASA NTRS1990

Observation of frequency up-conversion in the propagation of a high-power microwave pulse in a self-generated plasma

A chamber experiment is conducted to study the propagation of a high-power microwave pulse. The results show that the pulse is experiencing frequency up-shift while ionizing the background air if the initial carrier frequency of the pulse is higher than the electron plasma frequency at the incident boundary. Such a frequency autoconversion process may lead to reflectionless propagation of a high-power microwave pulse through the atmosphere.

Kuo, S. P.↗
NASA NTRS1998

An Evanescent Microwave Probe for Super-Resolution Nondestructive Imaging of Metals, Semiconductors, Dielectrics, Composites and Biological Specimens

Using evanescent microwaves with decay lengths determined by a combination of microwave wavelength (lambda) and waveguide termination geometry, we have imaged and mapped material non-uniformities and defects with a resolving capability of lambda/3800=79 microns at 1 GHz. In our method a microstrip quarter wavelength resonator was used to generate evanescent microwaves. We imaged materials with a wide range of conductivities. Carbon composites, dielectrics (Duroid, polymers), semiconductors (3C-SiC, polysilicon, natural diamond), metals (tungsten alloys, copper, zinc, steel), high-temperature superconductors, and botanical samples were scanned for defects, residual stresses, integrity of brazed junctions, subsurface features, areas of different film thickness and moisture content. The evanescent microwave probe is a versatile tool and it can be used to perform very fast, large scale mapping of a wide range of materials. This method of characterization compares favorably with ultrasound testing, which has a resolution of about 0.1 mm and suffers from high absorption in composite materials and poor transmission across boundaries. Eddy current methods which can have a resolution on the order of 50 microns are restricted to evaluating conducting materials. Evanescent microwave imaging, with careful choice of operating frequency and probe geometry, can have a resolution of up to 1 micron. In this method we can scan hot and moving objects, sample preparation is not required, testing is non-destructive, non-invasive and non-contact, and can be done in air, in liquid or in vacuum.

Pathak, P. S.↗