Search NASA⌕ Search

SEARCH · Search NASA

Results for “model satellites”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Atmosphere-biosphere exchange flux of carbon dioxide in a tallgrass prairie modeled with satellite spectral data

The estimation of the rate of net CO2 uptake of vegetated land surfaces is essential for studies of global carbon cycle. The present paper demonstrates the use of spectral reflectance data from satellite remote sensing to model net CO2 flux (NCF) of a tallgrass canopy at the Konza prairie, Kansas. A bidirectional reflectance canopy model was used to estimate seasonal changes in canopy leaf area index (LAI) from surface reflectances remotely sensed by SPOT 1 and Landsat 5 satellites. The radiation model was also coupled with leaf conductance-photosynthesis models to scale up stomatal conductance and NCF from individual leaves to canopy level according to radiation distribution inside the canopy. The satellite-data-driven model was able to closely simulate the seasonal change in LAI as well as the short-term variation of canopy LAI caused by the dry period during late July and early August in the area. Modeled canopy stomatal conductance (g(sub c)) and NCF agree with measurements within 0.16 cm/s and 0.28 mg m(exp -2)/s, respectively, during the growth season from late May to late August. In October both measured and modeled NCF turned to small negative values as canopy photosynthesis diminished and predicted LAI approached zero. In addition to data scatter, some of the differences between modeled and measured g(sub c) and NCF may be attributed to uncertainties in seasonal changes of plant physiological status that were not detected by satellite data; some of the differences were caused by inadequate description of the dependence of nighttime CO2 flux of soil respiration on near-surface turbulent mixing.

Gao, W.↗
NASA NTRS2016

The Asian Tropopause Aerosol Layer: Balloon-Borne Measurements, Satellite Observations and Modeling Approaches

Satellite observations and numerical modeling studies have demonstrated that the Asian Summer Monsoon (ASM) can provide a conduit for gas-phase pollutants in south Asia to reach the lower stratosphere. Now, observations from the CALIPSO satellite have revealed the Asian Tropopause Aerosol Layer (ATAL), a summertime accumulation of aerosols associated with ASM anticyclone, in the upper troposphere and lower stratosphere (UTLS). The ATAL has potential implications for regional cloud properties, climate, and chemical processes in the UTLS. Here, we show in situ measurements from balloon-borne instrumentation, aircraft and satellite observations, combined with trajectory and chemical transport model (CTM) simulations to explore the origin, composition, physical and optical properties of aerosols in the ATAL. In particular, we show balloon-based observations from our BATAL-2015 field campaign to India and Saudi Arabia in summer 2015, including in situ backscatter measurements from COBALD instruments, and some of the first observations of size and volatility of aerosols in the ATAL layer using optical particle counters (OPCs). Back trajectory calculations initialized from CALIPSO observations point to deep convection over North India as a principal source of ATAL aerosols. Available aircraft observations suggest significant sulfur and carbonaceous contributions to the ATAL, which is supported by simulations using the GEOS-Chem CTM. Source elimination studies conducted with the GEOS-Chem indicate that 80-90% of ATAL aerosols originate from south Asian sources, in contrast with some earlier studies.

Fairlie, T. D.↗
NASA NTRS1982

Structure and thermal evolution of the Galilean satellites

Models of the structure and thermal evolution of the Galilean satellites based on the simplest assumptions are described, the most important complications that are likely to exist are identified, and their consequences are explored. Io's internal energy source is modeled based on dissipation of tidal heating due to gravitational interaction with Jupiter and Europa. A proposed contribution due to electrical heating is discussed. Three arguments bearing on Io's dissipation rate are addressed and models for the satellite's interior are discussed. Callisto and Ganymede are treated together in an attempt to model the reasons for their different appearance. It is concluded that the persistence of Ganymede's surface features is due to a prolonged thermal evolution relative to Callisto, probably caused by a higher radioactive content. Theoretical arguments concerning Europa's thermal evolution are more briefly presented.

Cassen, P. M.↗
NASA NTRS1985

A comparative study of spherical and flat-Earth geopotential modeling at satellite elevations

Flat-Earth modeling is a desirable alternative to the complex spherical-Earth modeling process. These methods were compared using 2 1/2 dimensional flat-earth and spherical modeling to compute gravity and scalar magnetic anomalies along profiles perpendicular to the strike of variably dimensioned rectangular prisms at altitudes of 150, 300, and 450 km. Comparison was achieved with percent error computations (spherical-flat/spherical) at critical anomaly points. At the peak gravity anomaly value, errors are less than + or - 5% for all prisms. At 1/2 and 1/10 of the peak, errors are generally less than 10% and 40% respectively, increasing to these values with longer and wider prisms at higher altitudes. For magnetics, the errors at critical anomaly points are less than -10% for all prisms, attaining these magnitudes with longer and wider prisms at higher altitudes. In general, in both gravity and magnetic modeling, errors increase greatly for prisms wider than 500 km, although gravity modeling is more sensitive than magnetic modeling to spherical-Earth effects. Preliminary modeling of both satellite gravity and magnetic anomalies using flat-Earth assumptions is justified considering the errors caused by uncertainties in isolating anomalies.

Parrott, M. H.↗
NASA NTRS1992

Full Service ISDN Satellite (FSIS) network model for advanced ISDN satellite design and experiments

The Full Service Integrated Services Digital Network (FSIS) network model for advanced satellite designs describes a model suitable for discrete event simulations. A top down model design uses the Advanced Communications Technology Satellite (ACTS) as its basis. The ACTS and the Interim Service ISDN Satellite (ISIS) perform ISDN protocol analyses and switching decisions in the terrestrial domain, whereas FSIS makes all its analyses and decisions on-board the ISDN satellite.

Pepin, Gerard R.↗
NASA NTRS1988

Model-based satellite acquisition and tracking

A model-based optical processor is introduced for the acquisition and tracking of a satellite in close proximity to an imaging sensor of a space robot. The type of satellite is known in advance, and a model of the satellite (which exists from its design) is used in this task. The model base is used to generate multiple smart filters of the various parts of the satellite, which are used in a symbolic multi-filter optical correlator. The output from the correlator is then treated as a symbolic description of the object, which is operated upon by an optical inference processor to determine the position and orientation of the satellite and to track it as a function of time. The knowledge and model base also serves to generate the rules used by the inference machine. The inference machine allows for feedback to optical correlators or feature extractors to locate the individual parts of the satellite and their orientations.

Casasent, David↗
NASA NTRSDate not supplied

NASA Giovanni: Analyze, Compare, and Visualize 2000+ Earth Satellite and Model Variables Without Downloading Data and Software

Over vast oceans and remote continents, observations are often scarce and discontinuous. Satellite and model data play a critical role in research and applications. However, finding and accessing satellite and model data can be a daunting task for many, especially those outside the community. The NASA Goddard Earth Sciences (GES) Data and Information Services Center (DISC), one of 12 NASA Science Mission Directorate Data Centers, provides Earth science data, information, and services to everyone such as researchers, application users, educators, and students. GES DISC archives and supports datasets applicable to several NASA Earth Science Focus Areas including Atmospheric Composition, Water & Energy Cycles, Carbon Cycle & Ecosystem, and Climate Variability. To facilitate data discovery, evaluation, and exploration, GES DISC has developed the Geospatial Interactive Online Visualization ANd aNalysis Infrastructure (Giovanni), an online tool to analyze and visualize NASA remote sensing and model data without downloading data and software. As of this writing, over 2000 Earth satellite and model variables are available in Giovanni, including several wellknown NASA satellite missions (e.g., TRMM, GPM) and projects (e.g., MERRA-2, GPCP). Giovanni provides twenty-two plots that can be used to analyze, compare, and explore Earth data across different disciplines. Results can be shared with colleagues and downloaded for further analysis. Over the years, Giovanni has helped publish over 3000 referral papers. In this presentation, we will showcase key variables and plot types in Giovanni with examples. In particular, we will present several popular precipitation products from GPM and CPCP for evaluation and comparison.

data analysis↗
NASA NTRS1975

Satellite thermal modeling using the illuminographic camera

The application is discussed of illuminographic camera techniques to the measurement of radiative form factors for satellite modeling applications. The equation for the illuminographic mirror is derived, and the advantages of the method are discussed. Proximity error for the illuminographic mirror is defined, and estimates of this error as a function of the scale factor of the model are given, together with a method for halving this error. Designs for illuminographic mirrors are presented: the first provides a further threefold reduction in proximity error; the second permits the estimation of thermal radiation transfer coefficients to interior regions of otherwise inaccessible volumes. Finally, reflex Polaroid camera techniques appropriate to the relatively small size of the illuminographic mirror are described.

Wiesner, S. J.↗
NASA NTRS2012

Design and Fabrication of DebriSat - A Representative LEO Satellite for Improvements to Standard Satellite Breakup Models

This paper discusses the design and fabrication of DebriSat, a 50 kg satellite developed to be representative of a modern low Earth orbit satellite in terms of its components, materials used, and fabrication procedures. DebriSat will be the target of a future hypervelocity impact experiment to determine the physical characteristics of debris generated after an on-orbit collision of a modern LEO satellite. The major ground-based satellite impact experiment used by DoD and NASA in their development of satellite breakup models was SOCIT, conducted in 1992. The target used for that experiment was a Navy transit satellite (~40 cm, 35 kg) fabricated in the 1960's. Modern satellites are very different in materials and construction techniques than those built 40 years ago. Therefore, there is a need to conduct a similar experiment using a modern target satellite to improve the fidelity of the satellite breakup models. To ensure that DebriSat is truly representative of typical LEO missions, a comprehensive study of historical LEO satellite designs and missions within the past 15 years for satellites ranging from 1 kg to 5000 kg was conducted. This study identified modern trends in hardware, material, and construction practices utilized in recent LEO missions. Although DebriSat is an engineering model, specific attention is placed on the quality, type, and quantity of the materials used in its fabrication to ensure the integrity of the outcome. With the exception of software, all other aspects of the satellite s design, fabrication, and assembly integration and testing will be as rigorous as that of an actual flight vehicle. For example, to simulate survivability of launch loads, DebriSat will be subjected to a vibration test. As well, the satellite will undergo thermal vacuum tests to verify that the components and overall systems meet typical environmental standards. Proper assembly and integration techniques will involve comprehensive joint analysis, including the precise torqueing of fasteners and thread locking. Finally, the implementation of process documentation and verification procedures is discussed to provide a comprehensive overview of the design and fabrication of this representative LEO satellite.

Clark, S.↗
NASA NTRS2003

Asian Outflow and Trans-Pacific Transport of Carbon Monoxide and Ozone Pollution: An Integrated Satellite, Aircraft, and Model Perspective

Satellite observations of carbon monoxide (CO) from the Measurements of Pollution in the Troposphere (MOPITT) instrument are combined with measurements from the Transport and Chemical Evolution Over the Pacific (TRACE-P) aircraft mission over the northwest Pacific and with a global three-dimensional chemical transport model (GEOS-CHEM) to quantify Asian pollution outflow and its trans-Pacific transport during spring 2001. Global CO column distributions in MOPITT and GEOS-CHEM are highly correlated (R(exp 2) = 0.87), with no significant model bias. The largest regional bias is over Southeast Asia, where the model is 18% too high. A 60% decrease of regional biomass burning emissions in the model (to 39 Tg/yr) would correct the discrepancy; this result is consistent with TRACE-P observations. MOPITT and TRACE-P also give consistent constraints on the Chinese source of CO from fuel combustion (181 Tg CO/yr). Four major events of trans-Pacific transport of Asian pollution in spring 2001 were seen by MOPITT, in situ platforms, and GEOS-CHEM. One of them was sampled by TRACE-P (26-27 February) as a succession of pollution layers over the northeast Pacific. These layers all originated from one single event of Asian outflow that split into northern and southern plumes over the central Pacific. The northern plume (sampled at 6-8 km off California) had no ozone enhancement. The southern subsiding plume (sampled at 2-4 km west of Hawaii) contained a 8 - 17 ppbv ozone enhancement, driven by decomposition of peroxyacetylnitrate (PAN) to nitrogen oxides (NOx). This result suggests that PAN decomposition in trans-Pacific pollution plumes subsiding over the United States could lead to significant enhancements of surface ozone.

Heald, Colette L.↗
NASA NTRS2020

NASA Global Satellite and Model Data Products and Services for Tropical Meteorology and Climatology

Satellite remote sensing and model data play an important role in research and applications of tropical meteorology and climatology over vast, data sparse oceans and remote continents. Since the first weather satellite was launched by NASA in 1960, a large collection of NASA's Earth science data is freely available to the research and application communities around the world, significantly improving our overall understanding of the Earth system and environment. Established in the mid-80s, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), located in Maryland, USA, is a data archive center for multidisciplinary, satellite and model assimilation data products. As one of the 12 NASA data centers in Earth Sciences, GES DISC hosts several important NASA satellite missions for tropical meteorology and climatology such as the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) mission and the Modern-Era Retrospective analysis for Research and Applications (MERRA). Over the years, GES DISC has developed data services to facilitate data discovery, access, distribution, analysis and visualization, including Giovanni, an online analysis and visualization tool without the need to download data and software. Despite many efforts for improving data access, still quite a number of challenges remain, such as finding datasets and services for a specific research topic or project, especially for inexperienced users or users outside the remote sensing community. In this article, we list and describe major NASA satellite remote sensing and model datasets and services for tropical meteorology and climatology along with examples of using the data and services, in hope that may help users better utilize the information in their research and applications.

tropical meteorology and climatology, data, servic↗
NASA NTRS2019

Characterizing Spatio-Temporal Ozone Gradients Along Coastal Boundaries: Sondes and Mobile Measurements from OWLETS-2

One of the major difficulties for the modeling and satellite communities is the validation of O3 levels in sharp coastal transition regions within metropolitan areas. Land-water gradients of ozone as well as its precursors can be significant due to differences in emissions, land use, surface deposition, boundary layer height, and mesoscale wind patterns. The Ozone Water-Land Environmental Transition Study (OWLETS-2) was a follow-on field campaign spearheaded by NASA GSFC and LaRC's Tropospheric Ozone Lidar Network (TOLnet) conducted in the summer of 2018 within the Upper Chesapeake region to better characterize spatial and vertical distribution of various pollutants across the coastal boundary. Supporting this campaign, 40 ozonesondes were simultaneously launched directly in the marine environment on Hart Miller Island (HMI) and on two land sites: both the University of Maryland, Baltimore County (UMBC) and Howard University-Beltsville (HUBV). In addition, Personal Ozone Monitors (POMs) - small sensors - were deployed in a variety of environments - car, boat, and drone, to name a few - to quantify ozone across fine spatial and temporal thresholds. The purpose of these measurements is multifaceted: to provide both ozone pollution information to coastal metropolitan communities and validation to satellite, modeling, and forecasting communities, especially in current and future satellite endeavors such as TROPOMI and TEMPO.

coastal pollution↗
NASA NTRS1999

Variability of Upper-Tropospheric Precipitable from Satellite and Model Reanalysis Datasets

Numerous datasets have been used to quantify water vapor and its variability in the upper-troposphere from satellite and model reanalysis data. These investigations have shown some usefulness in monitoring seasonal and inter-annual variations in moisture either globally, with polar orbiting satellite data or global model output analysis, or regionally, with the higher spatial and temporal resolution geostationary measurements. The datasets are not without limitations, however, due to coverage or limited temporal sampling, and may also contain bias in their representation of moisture processes. The research presented in this conference paper inter-compares the NVAP, NCEP/NCAR and DAO reanalysis models, and GOES satellite measurements of upper-tropospheric,precipitable water for the period from 1988-1994. This period captures several dramatic swings in climate events associated with ENSO events. The data are evaluated for temporal and spatial continuity, inter-compared to assess reliability and potential bias, and analyzed in light of expected trends due to changes in precipitation and synoptic-scale weather features. This work is the follow-on to previous research which evaluated total precipitable water over the same period. The relationship between total and upper-level precipitable water in the datasets will be discussed as well.

Jedlovec, Gary J.↗
NASA NTRS1980

Analytical modeling of satellites in geosynchronous environment

Experiences with surface charging of geosynchronous satellites are reviewed and mechanisms leading to discharges on satellite surfaces are considered. It was found that the large differential voltages between the surface and the substrate required to produce massive laboratory discharges do not occur on satellites in space. Analytical modeling predictions supported by dielectric charging data from P78-2, SCATHA (Spacecraft Charging at High Altitudes) flight results are discussed. Ungrounded insulator areas, buried charge layers (due to mid-energy range particles), and positive differential voltages (where structure voltages are less negative than surrounding dielectric surface voltages) are considered as possible mechanisms producing satellite charge up.

Stevens, N. J.↗
NASA NTRS1989

Development of a funding, cost, and spending model for satellite projects

The need for a predictive budget/funging model is obvious. The current models used by the Resource Analysis Office (RAO) are used to predict the total costs of satellite projects. An effort to extend the modeling capabilities from total budget analysis to total budget and budget outlays over time analysis was conducted. A statistical based and data driven methodology was used to derive and develop the model. Th budget data for the last 18 GSFC-sponsored satellite projects were analyzed and used to build a funding model which would describe the historical spending patterns. This raw data consisted of dollars spent in that specific year and their 1989 dollar equivalent. This data was converted to the standard format used by the RAO group and placed in a database. A simple statistical analysis was performed to calculate the gross statistics associated with project length and project cost ant the conditional statistics on project length and project cost. The modeling approach used is derived form the theory of embedded statistics which states that properly analyzed data will produce the underlying generating function. The process of funding large scale projects over extended periods of time is described by Life Cycle Cost Models (LCCM). The data was analyzed to find a model in the generic form of a LCCM. The model developed is based on a Weibull function whose parameters are found by both nonlinear optimization and nonlinear regression. In order to use this model it is necessary to transform the problem from a dollar/time space to a percentage of total budget/time space. This transformation is equivalent to moving to a probability space. By using the basic rules of probability, the validity of both the optimization and the regression steps are insured. This statistically significant model is then integrated and inverted. The resulting output represents a project schedule which relates the amount of money spent to the percentage of project completion.

Johnson, Jesse P.↗
NASA NTRS2011

Maritime Aerosol Network as a Component of AERONET - First Results and Comparison with Global Aerosol Models and Satellite Retrievals

The Maritime Aerosol Network (MAN) has been collecting data over the oceans since November 2006. Over 80 cruises were completed through early 2010 with deployments continuing. Measurement areas included various parts of the Atlantic Ocean, the Northern and Southern Pacific Ocean, the South Indian Ocean, the Southern Ocean, the Arctic Ocean and inland seas. MAN deploys Microtops handheld sunphotometers and utilizes a calibration procedure and data processing traceable to AERONET. Data collection included areas that previously had no aerosol optical depth (AOD) coverage at all, particularly vast areas of the Southern Ocean. The MAN data archive provides a valuable resource for aerosol studies in maritime environments. In the current paper we present results of AOD measurements over the oceans, and make a comparison with satellite AOD retrievals and model simulations.

Smirnov, A.↗