Search NASA⌕ Search

SEARCH · Search NASA

Results for “moisture content”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Kinetic study of hydrogen transport in graphite under molten fluoride salt environment

Here, in this work, a kinetic model, which describes the reactions occurring during the hydrogen charging process on a graphite surface, was optimized on Electrochemical Impedance Spectroscopic (EIS) to study the entry of hydrogen into graphite in high temperature molten FLiNaK salt. The results show that the rate constants of k 1 increases with decreasing applied potential (becoming more negative), and k 2 and k 3 are independent of the applied potential. At the same charging potential, all the three rate constants are independent of the water concentration in the FLiNaK salt. The surface coverage of absorbed hydrogen increases with decreasing the charging potential and increasing the moisture content in the salt. The adsorption efficiency of hydrogen increases with increasingly charging potential and decreases with increasing moisture content of the FLiNaK salt. These results demonstrate that EIS is a promising technique for measuring the kinetic parameters for hydrogen transport in graphite under molten fluoride salt environment.

EIS↗
DOE OSTI2019

Measured moisture performance of sealed and insulated attics with permeable insulation in california homes

This study performed detailed thermal and moisture measurements in two homes in Fresno and Clovis, California with sealed attics insulated with glass fiber insulation to determine moisture performance in inland California climates. Data were recorded once every minute for more than a year in each home to allow detailed observation of time-varying moisture and thermal conditions. Moisture measurements were taken at multiple locations in each attic and included wood moisture, surface condensation and surface relative humidity. The results showed that there are strong solar-driven diurnal cycles in attic wood and air moisture content, as well as longer-term seasonal and annual variations. Mold growth was obdserved on the North roof deck in one of the two homes even in this sunny dry climate with attics built in compliance with California building codes that specifically address sealed and insulated attics with vapor-permeable insulation. We investigated moisture stratification in the attic and found that, although there is stratification during sunny daytime hours, this was not when wood moisture content, surface humidity or surface condensation are high. Therefore, other moisture transport mechanisms are acting to increase moisture levels near the roof peak. Finally, our measurements also showed that the attic with the highest measured moisture levels did not have any mold growth, while mold was visually observed in the attic whose measurements indicted little or no concern, indicating that the state-of-the-art in moisture measurement and mold growth prediction in building assemblies may be insufficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Measured Moisture Performance of Sealed and Insulated Attics with Permeable Insulation In California Homes

This study performed detailed thermal and moisture measurements in two homes in Fresno and Clovis, California with sealed attics insulated with glass fiber insulation to determine moisture performance in inland California climates. Data were recorded once every minute for more than a year in each home to allow detailed observation of time-varying moisture and thermal conditions. Moisture measurements were taken at multiple locations in each attic and included wood moisture, surface condensation and surface relative humidity. The results showed that there are strong solar-driven diurnal cycles in attic wood and air moisture content, as well as longer-term seasonal and annual variations. Mold growth was obdserved on the North roof deck in one of the two homes even in this sunny dry climate with attics built in compliance with California building codes that specifically address sealed and insulated attics with vapor-permeable insulation. We investigated moisture stratification in the attic and found that, although there is stratification during sunny daytime hours, this was not when wood moisture content, surface humidity or surface condensation are high. Therefore, other moisture transport mechanisms are acting to increase moisture levels near the roof peak. Finally, our measurements also showed that the attic with the highest measured moisture levels did not have any mold growth, while mold was visually observed in the attic whose measurements indicted little or no concern, indicating that the state-of-the-art in moisture measurement and mold growth prediction in building assemblies may be insufficient.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2023

Response of Extreme Rainfall to Atmospheric Warming and Wetting: Implications for Hydrologic Designs Under a Changing Climate

Understanding the processes of rainfall extremes and their response to anthropogenic climate change is pivotal for improved adaptation of unprecedented flood hazards around the world. Here we take the record-breaking 20 July 2021 storm over central China as an example. We investigate the response of this particular storm to atmospheric warming (i.e., increase in air temperature) and wetting (i.e., increase in atmospheric moisture content) based on a series of convection-permitting model simulations. Our results show non-monotonic changes of the space-time rainfall variability to either increased temperature or atmospheric moisture content. The most extreme rain rate is produced when relative humidity is increased by 20~40 % or temperature is increased by less than 2°C. The non-monotonic rainfall response is more clearly revealed at fine spatial (100-1000 km 2 ) and temporal scales (less than 6 hours) rather than over the entire domain (~10 4 km 2 ) and aggregated over the storm duration (around two days). This is mainly attributable to the distinct feedbacks from atmospheric dynamics (i.e., moisture convergence and interaction with regional topography) rather than regulated by thermodynamic changes alone. Furthermore, atmospheric warming poses notable changes in the vertical structure of storm cells, contributing to reduced areal reduction factors at small spatial scales and short durations, while atmospheric wetting additionally modifies storm evolution properties. Our modeling analyses challenge the existing practices for hydrologic designs under a changing climate, highlighting particular vulnerability for cities or small basins to short-duration rainfall extremes and the resultant flash flood hazards.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Process intensification approach to enhancing heat and mass transfer: Radio frequency (RF) assisted drying of paper and board

Conventional multi-cylinder drying of paper and board typically relies on both conductive drying from steam-heated cylinders and convective drying, where heated air flows over the paper web surface. Conduction primarily contributes to heat transfer, while convection is the main driver of mass transfer. However, conventional drying systems are heavily dependent on steam, usually powered by fossil fuels, and are often energy-inefficient with high levels of waste. Additionally, these surface-driven processes result in a lower percentage of energy absorption compared to the energy supplied, leading to significant energy losses. To improve this long-standing process, an experimental system was developed to investigate a process intensification approach involving the integration of Radio Frequency (RF) heating, a volumetric electromagnetic technology, alongside traditional conduction and convection drying methods. This study also emphasizes the use of sensors to continuously monitor key parameters such as moisture content, supply system temperatures, sample temperatures, air flows, and drying rates in real-time. The effect of RF as an auxiliary energy source in localized environments at varying moisture levels was explored to optimize industrial drying systems, quantify potential improvements, and provide insights for future studies. Experimental results from trials combining RF with convection and with the base case alternating conduction-convection drying processes are presented. It is shown that RF is a viable process intensification approach for paper drying improving the drying rate and energy intensity at higher moisture contents. These findings offer valuable insights for process intensification and contribute to the process development, modeling, and simulation of advanced paper drying techniques.

42 ENGINEERING↗
DOE OSTI2021

Data from: Quantifying and correcting for pre-assay CO2 loss in short-term carbon mineralization assays

The active fraction of soil organic carbon is an important component of soil health and often is quickly assessed as the pulse of CO2 released by re-wetting dried soils in short-term (24–72 h) assays. However, soils can lose carbon (C) as they dry and, if soil samples vary in moisture content at sampling, differential C loss during the pre-assay dry-down period may complicate the assay's interpretations. We examined the impact of pre-assay CO2 loss in a long-cultivated agricultural soil at initial moisture contents of 30 %, 50 %, and 70 % water-filled pore space (WFPS). We found that 50 % and 70 % WFPS treatments lost more C during drying than did those in the 30 % WFPS treatment and that dry-down losses led to a 26 %–32 % underestimate of their CO2 pulses. We developed a soil-specific correction factor to account for these initial soil moisture effects. Future C mineralization studies may benefit from similar corrections.

Belanger, Matthew↗
DOE OSTI2021

Quantifying and correcting for pre-assay CO 2 loss in short-term carbon mineralization assays

The active fraction of soil organic carbon is an important component of soil health and often is quickly assessed as the pulse of CO 2 released by re-wetting dried soils in short-term (24–72 h) assays. However, soils can lose carbon (C) as they dry and, if soil samples vary in moisture content at sampling, differential C loss during the pre-assay dry-down period may complicate the assay's interpretations. We examined the impact of pre-assay CO 2 loss in a long-cultivated agricultural soil at initial moisture contents of 30 %, 50 %, and 70 % water-filled pore space (WFPS). We found that 50 % and 70 % WFPS treatments lost more C during drying than did those in the 30 % WFPS treatment and that dry-down losses led to a 26 %–32 % underestimate of their CO 2 pulses. We developed a soil-specific correction factor to account for these initial soil moisture effects. Future C mineralization studies may benefit from similar corrections.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Capturing soil moisture and salinity changes in flooded coastal forests using electrical resistivity and induced polarization

Geophysical methods provide high-resolution spatial measurements of physical quantities sensitive to changes in soil moisture and salinity and can be used to monitor soil hydrological responses to flooding. However, extracting quantitative hydrological information from geophysical data remains challenging. In this study, we extended existing petrophysical models to estimate soil moisture and salinity from electrical measurements to address this challenge. We manipulated two hydrologically isolated 2000 m 2 experimental plots by simultaneously inundating them with 265 m 3 of either freshwater or estuarine water. Repeated electrical resistivity and induced polarization measurements were used to image the water and solute infiltration along two transects that are 100 and 42 m in length. Petrophysical models derived from laboratory multi-salinity electrical measurements were used to estimate changes in soil moisture and fluid salinity from field measurements of real and imaginary conductivity during the ecosystem-scale flooding experiment. The real conductivity increased by ∼100% in the freshwater plot and ∼570% in the saltwater plot. The change in imaginary conductivity in the freshwater plot was <1 mS/m, whereas that of the estuarine water plot was ∼5 mS/m. Real conductivity shows dependence on soil moisture content with a coefficient of determination (R 2 ) > 0.7, while the imaginary conductivity shows a dependence on soil salinity with R 2 > 0.6. The results validate the use of electrical resistivity for estimating changes in soil moisture content in response to flooding. Combining electrical resistivity imaging with induced polarization measurements provides the possibility to account for changes in pore fluid conductivity.

Adebayo, Moses B. [Univ. of Toledo, OH (United Sta↗
DOE OSTI2024

High-speed X-ray imaging of droplet-powder interaction in binder jet additive manufacturing

Binder jetting (BJ) is an additive manufacturing process that uses a powder feedstock in a layer wise process to print parts by selectively depositing a liquid binder into the powder bed using inkjet technology. This study presents findings from high-speed synchrotron imaging of binder droplet-interaction during the BJ printing process. A custom laboratory-scale BJ test platform was used for testing which enabled control of relevant process parameters including powder material, print geometry, spacing between droplets, powder bed density, and powder moisture content. Powder ejection was observed above the powder bed surface and powder relocation due to droplet impact was observed below the powder bed surface. Powder relocation was observed to be sensitive to powder material, powder bed density, powder bed moisture, droplet spacing, and print geometry. Increasing powder bed density was found to increase particle ejection velocity but reduce the total number of particles ejected. Process parameters that increase binder / moisture content in the powder bed were found to reduce powder ejection. The number of ejected powder particles was reduced for lower droplet spacings. Both powder ejection and powder relocation below the powder bed were reduced by treating the surface of the powder bed with a water/triethylene glycol (TEG) mixture before printing. In conclusion, results from this study help to build understanding of the physical mechanisms in the BJ printing process that may contribute to formation of defects observed in final parts.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Biohydrogen Generation from Un-Pretreated Spent Coffee Grounds with Clostridium Thermocellum

Coffee is among the world's most widely consumed beverages, generating 18 million wet tonnes of waste spent coffee grounds annually. Disposal of SCGs is complicated by their high moisture content, their recalcitrant chemical composition, and the presence of caffeine and other bioactive compounds. Dark fermentation is a promising technology for conversion of waste cellulosic biomass into renewable hydrogen, carbon dioxide, and volatile fatty acids. Typical SCGs have high moisture content, are pre-milled to fine particle sizes, and contain 8%-19% cellulose and up to 40% hemicellulose, making them an attractive feedstock for dark fermentation. In this study, we investigate biohydrogen production from unpretreated SCGs using Clostridium thermocellum strain KJC19-9, a cellulolytic bacterium engineered to co-utilize xylose, specifically examining the inhibitory effects of residual caffeine and high solids loadings on microbial growth and hydrogen production efficiency. While SCGs were initially resistant to both cell growth and biohydrogen production, a strategy to co-ferment with low concentrations of cellobiose dramatically enhanced process performance, reducing lag phase duration and enabling cellulosome production for efficient cellulose hydrolysis. This co-substrate approach generated up to 944 mL hydrogen per L reaction from 50 g/L of spent coffee grounds over 120 h (1.34 mol H2/mol carbohydrate), validating SCGs as a promising dark fermentation feedstock and underscoring the value of mixed substrate approaches in consolidated bioprocessing.

08 HYDROGEN↗
DOE OSTI2022

Substantial differences in soil viral community composition within and among four Northern California habitats

Abstract Viruses contribute to food web dynamics and nutrient cycles in diverse ecosystems, yet the biogeographical patterns that underlie these viral dynamics are poorly understood, particularly in soil. Here, we identified trends in soil viral community composition in relation to habitat, moisture content, and physical distance. We generated 30 soil viromes from four distinct habitats (wetlands, grasslands, woodlands, and chaparral) by selectively capturing virus-sized particles prior to DNA extraction, and we recovered 3432 unique viral ‘species’ (dsDNA vOTUs). Viral communities differed significantly by soil moisture content, with viral richness generally higher in wet compared to dry soil habitats. However, vOTUs were rarely shared between viromes, including replicates <10 m apart, suggesting that soil viruses may not disperse well and that future soil viral community sampling strategies may need to account for extreme community differences over small spatial scales. Of the 19% of vOTUs detected in more than one virome, 93% were from the same habitat and site, suggesting greater viral community similarity in closer proximity and under similar environmental conditions. Within-habitat differences indicate that extensive sampling would be required for rigorous cross-habitat comparisons, and results highlight emerging paradigms of high viral activity in wet soils and soil viral community spatial heterogeneity.

Durham, Devyn M.↗
DOE OSTI2019

Flow Characterization of Compressed Woody Biomass

Global interest for using terrestrial biomass as an energy source has been increasing recently due to potentially significant socio-economic and environmental benefits relative to fossil energy. Thermochemical biomass processes converting biomass to fuels are relatively well developed, e.g. for direct combustion, gasification, and pyrolysis. However, critical problems often arise when attempting to feed biomass into commercial-scale reactors continuously and without interruption. Biomass particles, whether derived from woody or agricultural feedstock, vary greatly in size, shape, density, and moisture content. High cohesiveness, low bulk density, and poor material flow characteristics often prevent continuous feeding due to bridging, rat-hole formation, blockage, and seal failures. Among all different types of feeders utilized to feed biomass into reactors, screw feeding has received significant attention in recent years. Screw feeders are fuel-specific and require careful design to be reliable, efficient, and economical, especially for reactors operating at elevated pressures. In order to mimic the flow properties of compressed biomass inside a compression-screw feeder, rheological properties of three types of compressed lignocellulosic biomass were investigated using a co-rotating twin screw microcompounder. Experiments were conducted to find the impact of moisture content, particle size and type, and screw speed on rheological properties of forest residual particles as well as sawdust. Increasing moisture from 10 to 50% reduced the apparent viscosity of the compressed biomass. Also, higher screw speeds (10 to 90 rpm) led to a lower relative viscosity. At elevated screw speeds, significant temperature differences were measured between the initial and final states, which should be accounted for in equipment design and operation.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2021

Geochemistry of East River, Colorado floodplain sediments from Meander Z and Meander Y collected in 2017.

This dataset includes sediment geochemical characterization data from floodplain sediments collected as a part of the Watershed Function Scientific Focus Area (SFA) located in the Upper Colorado River Basin. The data were collected in order to investigate the role of biogeochemical cycling and other river corridor processes on riverine export of solutes. Sediment cores were collected from Meander Z (MZA, MZB) and Meander Y (MYP) just upstream of the confluence with Brush Creek in September 2017 to depths of approximately 40-95 cm in 15-20 cm intervals. Analyses include moisture content, particle size analysis, total inorganic and total organic carbon, and extractions by 1 M KCl (for adsorbed NH4), anoxic HCl (for Fe(II) content), ammonium oxalate (for amorphous Fe-oxide content), and dithionite (for crystalline Fe-oxide content). Sample locations are included in both a kmz file, which can be opened in Google Earth, and a csv file, and methods are included as a text document. All characterization data is summarized in a Microsoft Excel file, and is also included as individual .csv files for each extraction (ammonium oxalate, anoxic HCl, dithionite, and KCl) and for bulk sediment data (moisture content, particle size analysis, TIC, and TOC).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Soil Characterizations of Five Urban Sites in Knoxville, Tennessee. 2024-2025

This dataset includes soil characterizations from five urban parks in Knoxville, Tennessee, USA: Cumberland Estates Park (CEP), Socially Equal Energy Efficient Development (SEED), West View Park (WVP), Victor Ashe Park (VAP), and West Hills Park (WHP). The dataset consists of seven CSV files reporting the data from the measurements of gravimetric moisture content, pH, total carbon and nitrogen, soil texture, dissolved organic carbon and nitrogen, and microbial biomass carbon and nitrogen derived from these soil cores. During five separate sampling events conducted in 2024 and 2025, five soil cores were collected at each site within 3 meters of the remote soil monitoring equipment. In 2025, an additional three soil cores were collected adjacent to the monitoring equipment at each site to assess soil bulk density. This dataset is part of a larger study investigating the effects of soil moisture and plant evapotranspiration on ambient temperature and relative humidity across multiple urban parks in Knoxville, Tennessee.

Mayes, Melanie A [ORNL] (ORCID:0000000163689210)↗
DOE OSTI2020

Vertical Transport of Water/Contaminant Due to Intermittent Water Influx on the Ground Surface of Vadose Zone - 20088

For movement of moisture and transport of contaminants in the vertical direction, two equations, the Richards equation and the advection-dispersion equation, are solved in a vadose zone for prescribed water and contaminant influx conditions at the ground surface. Two different boundary conditions are considered, one with a single peak of sinusoidal variation and four peaks of finite duration, each of which is sinusoidal in shape. The moisture migration is solved and then the contaminant transport, which is coupled to moisture movement, is solved. In the case of a single influx on the ground surface, at first the hydraulic head and moisture content show a peak. Then above the peak and below the ground surface, the peaks tend to die out, showing a tendency to return to the initial state. The vertical profile of concentration also shows a single peak, which soon becomes stagnant because downward water migration is faster than concentration profile movement. In the case of four intermittent array of peaks, the hydraulic head and moisture content profiles tend to merge and combine together. The concentration profiles show appearance of four peaks clearly. However, although the peak value of concentration remains quite constant, the values may vary with the sorption coefficient because of repeated influx of water and contaminant through the top boundary, the ground surface. The penetration depth decreases with an increasing sorption coefficient. (authors)

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Data and scripts associated with the manuscript "Estimating soil moisture and salinity response to simulated coastal flooding using time-lapse electrical resistivity and induced polarization monitoring”

This package contains geophysics datasets generated during the simulated ecosystem-flooding experiment – TEMPEST (Terrestrial Ecosystem Manipulation to Probe the Effects of Storm Treatment). These geophysics data consist of Electrical Resistivity Imaging (ERI) and Induced Polarization (IP) datasets collected to estimate the soil moisture and salinity response to the simulated coastal flooding experiment. In addition to using geophysics datasets to estimate soil moisture and salinity response, petrophysical relationship between the measured resistivity and moisture content and salinity using the multisalinity. This package consists of two folders: “MultiSalinity Experiment” folder and “TEMPEST Experiment and petrophysical conversion” folders. The “MultiSalinity Experiment” folder contains the datasets generated from the multisalinity experiment used to develop the petrophysical reslationship. The “TEMPEST Experiment and petrophysical conversion” folder contains ERI, IP, Ground Penetrating Radar (GPR) and Electromagnetic Induction (EMI) datasets collected during the TEMPEST experiment. This study shows the ability to used geophysical datasets in estimating moisture content and salinity at scale will be useful in calibrating Earth System Models.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Physical Properties of Moist, Fermented Corn Grain after Processing by Grinding or Milling

A novel biomass production system, integrating the co-harvesting and co-storage of moist corn grain and stover, promises a reduction in delivered feedstock costs. In this innovative method, the dry grain traditionally utilized for feed or biofuel production will now be processed at a considerably greater moisture content. The adoption of this approach may necessitate a substantial redesign of existing material handling infrastructure to effectively accommodate the handling and storage of moist grain after processing by milling or grinding. A comprehensive study was conducted to quantify the physical properties of this grain after processing with a knife processor or a hammermill. The geometric mean particle size, bulk and tapped density, sliding angle, material coefficient of friction, and discharged angle of repose were quantified. Five grain treatments, either fermented or unfermented, and having different moisture contents, were used. After processing, the moist, fermented ground grain exhibited a significantly smaller particle size compared to the dry grain. Additionally, both moist processed grains resulted in a decreased bulk density and increased material sliding angle, friction coefficient, and angle of repose. The examined metrics collectively suggest that handling, mixing, and storing moist ground grain will pose significant challenges compared to conventional dry ground grain. This increased difficulty may lead to substantially higher costs, a crucial factor that must be carefully considered when evaluating the overall economics of implementing this new biomass production system using combined harvesting and storage of corn grain and stover.

Blazer, Keagan J.↗
DOE OSTI2020

Relative Roles of Low‐Level Wind Speed and Moisture in the Diurnal Cycle of Rainfall Over a Tropical Island Under Monsoonal Flows

Abstract Using satellite observations and reanalysis data, this study investigates the relative roles of low‐level wind speed and moisture content in the rainfall diurnal cycle over a tropical island influenced by monsoonal winds. Results show that the spatiotemporal characteristics of rainfall over the island are evidently influenced by the two factors. Specifically, the spatial distribution of rainfall is primarily determined by the low‐level wind speeds, while the rainfall diurnal cycle is influenced by both factors. Weaker low‐level wind speed leads to stronger and wider inland convergence and afternoon precipitation, which are mainly produced by the inland penetrating sea breeze fronts. Nighttime rainfall over the island is closely related to the inertial oscillation. Stronger nocturnal rainfall can be found with higher low‐level moisture content and stronger monsoonal winds. The multiscale interactions between the large‐scale circulation, land–sea breezes, and inertial oscillation play essential roles in modulating the rainfall over this tropical island.

Zhu, Lei↗