Search NASA⌕ Search

SEARCH · Search NASA

Results for “monomer separations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Impact of Confinement and Zwitterionic Ligand Chemistry on Ion–Ion Selectivity of Functionalized Nanopores

Membranes incorporating zwitterionic chemistries have recently emerged as promising candidates for facilitating challenging ion–ion separations. Transport of ions in such membranes predominantly occurs in hydrated nanopores lined with zwitterionic monomers. Here, to shed light on the physics of ion–ion selectivity underlying such materials, we conducted molecular dynamics simulations of sodium halide transport in model nanopores grafted with sulfobetaine methacrylate molecules. Our results reveal that in both functionalized and unfunctionalized nanopores smaller ions prefer to reside near the pore center, while the larger ions tend to reside near the pore walls. An enhancement in the selective transport of larger anions is observed within the unfunctionalized nanopores relative to that in salt-in-water solutions. Upon functionalization of the nanopores with zwitterions (ZIs), the disparities in the anionic distribution profiles within the pores coupled with differences in the anion-ZI interactions result in a slowdown of larger anions relative to smaller anions. Increasing the ZI grafting density exacerbates these effects, further promoting the selective transport of smaller anions. Our results suggest that selectivity toward large anions can be realized by using nanoporous membranes with ZI content that is high enough to facilitate ion/water partitioning into the pores while preserving the characteristic tendency of the unfunctionalized pores to facilitate faster transport of the larger anions. On the other hand, selectivity toward smaller anions can be achieved by targeting ZI content within the pores that is high enough to significantly slow down the transport of large anions but not high enough to hinder the partitioning of ions/water molecules into the pore due to steric effects.

anions↗

Chemical Diversity of Oligomers in Biomass Fast Pyrolysis Oils, Part 2: Heavy Lignin-Derived Molecules and Highly Dehydrated Sugars from Dichloromethane-Insoluble Pyrolytic Lignin

Here, this paper, the second in a series, investigates the water-insoluble, dichloromethane (DCM)-insoluble residue of BTG pyrolysis oil, also known in the literature as high-molecular-weight pyrolytic lignin (HMW-PL). HMW-PL accounts for 9.2 wt % of the original bio-oil, which is known to increase upon aging and contribute to coke formation during bio-oil upgrading. Understanding its composition is crucial for managing pyrolysis oil during the processing. The HMW-PL was fractionated using a silica gel column with solvents of increasing polarity: ethyl acetate (EA), acetone (AC), isopropanol (ISO), and methanol (MeOH), yielding 49.2, 19.9, 8.2, and 8.1 wt %, respectively. Each subfraction was characterized by UV-fluorescence, FTIR, HSQC NMR, and (−)APCI-FT-Orbitrap MS. Analysis revealed that the EA subfraction primarily contained aromatic dimers (C 19 –C 20 ) and trimers (C 17 –C 13 ), while the MeOH subfraction was rich in oxygenated aliphatic monomers (C 8 –C 16 ) likely derived from sugar dehydration products. The resulting fractions were further separated via preparatory HPLC. Fifty-five candidate molecular structures were proposed based on the Orbitrap MS data, supported by UV-fluorescence, FTIR, and NMR results. This fractionation strategy defined four distinct subfractions, enabling the proposal of surrogate molecular structures and advancing the molecular-level understanding of the HMW-PL fraction in the pyrolysis bio-oil.

High-Molecular-Weight PL↗

Mixed polyester recycling can enable a circular plastic economy with environmental benefits

The mixed and varied nature of fossil-based and bio-based plastic waste requires complex and costly separations to enable compatibility with recycling technologies. A circular plastic economy based on mixed polyesters through cleaving ester bonds to produce monomers, while re-utilizing bio-based monomers to produce high-quality sustainable plastics, charts an exciting solution. However, the feasibility of such a circular economy solution remains underexplored. Here, in this study, we conducted a techno-economic analysis and life-cycle assessment of three polyester depolymerization recycling processes-methanolysis, glycolysis, and acid hydrolysis-for a mixed feedstock (polyethylene terephthalate [PET], polylactic acid [PLA], and polybutylene adipate terephthalate [PBAT]). Methanolysis outperforms glycolysis and hydrolysis economically and environmentally due to more efficient downstream separations, generating products with a 31% decrease in selling price and 21%-46% reduction in acidification, carcinogenic toxicity, fossil-fuel depletion, global warming potential, particulate formation, and smog formation compared to conventional polyester manufacturing. This study highlights the viability of a circular plastic economy for mixed polyesters via a single chemical recycling process.

09 BIOMASS FUELS↗

Indirect additive manufacturing process

A method for indirect additive manufacturing of an object, the method comprising: (i) separately feeding a powder from which said object is to be manufactured and either a difunctional curable monomer according to Formula (I) or an adhesive polymer binder into an additive manufacturing device; (ii) dispensing selectively positioned droplets of said difunctional curable monomer or adhesive polymer binder, from a printhead of said additive manufacturing device, into a bed of said powder to bind particles of said powder with said difunctional curable monomer or adhesive polymer binder to produce a curable preform having a shape of the object to be manufactured; and, in the case of the difunctional curable monomer, (iii) curing said curable preform to form a crosslinked object.

Saito, Tomonori↗

Defect engineering of porous aromatic frameworks via end capping improves dioxane removal from water

Amorphous porous organic polymers show promise for energy-efficient adsorptive separations, but it is difficult to understand or improve their performance through intentional structural modification. Herein, we report the synthesis of porous aromatic frameworks (PAFs) with pore structures tailored by the incorporation of a monofunctionalized end-capping monomer that disrupts framework topology. Combining experimental characterization with molecular simulations, we show that this defect engineering strategy yields less densely crosslinked networks, which leads to pore collapse and the presence of unique adsorption sites. These defect-engineered PAFs exhibit enhanced removal of 1,4-dioxane, an important environmental pollutant, from water. Increasing the concentration of end-capping monomers produces PAFs with narrower pore size distributions and improved 1,4-dioxane uptake. These results illustrate that defect engineering can effectively modulate polymer connectivity and porosity for applications in selective adsorptive separations. In conclusion, this technique avoids post-synthetic treatments and presents another approach to tailor amorphous polymeric adsorbents.

36 MATERIALS SCIENCE↗

Templated synthesis enhances the cobalt adsorption capacity of a porous organic polymer

Divalent transition metals such as Co(II) are important targets for removal from water sources, due to their potential toxicity as well as their high value. In this study, we found that a series of porous organic polymers based on amide-linked tetraphenylmethane units are effective Co(II) ion adsorbents in aqueous solution. To increase the density of Co(II) binding sites, we then developed a templated synthesis in which the branched, rigid monomers are pre-assembled around Co(II) ions prior to polymerization. Furthermore, after polymer formation, the Co(II) template ions are removed to yield a material rich in Co(II) binding sites. Ion adsorption isotherms show that the Co(II)-templated material has an ion adsorption capacity significantly greater than those of the non-templated materials, highlighting the utility of a templated synthetic route. SEM and TEM images show the morphology of the templated polymer to be dramatically different from the non-templated polymers and to be similar in size and shape to the Co(II)–monomer precursors, emphasizing the role of the template ions in directing the formation of the resulting polymer. This guest-templated approach requires no functionalization of the generic monomer and represents a promising synthetic route to high-capacity ion adsorbents for water purification and aqueous separations.

36 MATERIALS SCIENCE↗

A multi-step nucleation process determines the kinetics of prion-like domain phase separation

Compartmentalization by liquid-liquid phase separation (LLPS) has emerged as a ubiquitous mechanism underlying the organization of biomolecules in space and time. Here, we combine rapid-mixing time-resolved small-angle X-ray scattering (SAXS) approaches to characterize the assembly kinetics of a prototypical prion-like domain with equilibrium techniques that characterize its phase boundaries and the size distribution of clusters prior to phase separation. We find two kinetic regimes on the micro- to millisecond timescale that are distinguished by the size distribution of clusters. At the nanoscale, small complexes are formed with low affinity. After initial unfavorable complex assembly, additional monomers are added with higher affinity. At the mesoscale, assembly resembles classical homogeneous nucleation. Careful multi-pronged characterization is required for the understanding of condensate assembly mechanisms and will promote understanding of how the kinetics of biological phase separation is encoded in biomolecules.

59 BASIC BIOLOGICAL SCIENCES↗

Hydrolysis of Polyamide 6 to ε‐Caprolactam over Titanium Dioxide

Polyamides (PAs) are an important component of discarded textiles and food packaging. Chemical recycling can recover PA monomers, enabling repolymerization to produce virgin-grade PA. However, contemporary PA chemical recycling methods employ homogeneous catalysts that are hard to separate. Anatase TiO 2 is reported as a catalyst for PA6 hydrolysis at 270 °C for 0.5 h, achieving a maximum ε-caprolactam (CL) yield of 81% (limited by thermodynamic equilibrium). The CL yield decreases upon catalyst reuse, due to loss of catalyst surface area induced by significant changes in catalyst crystallinity and texture. Pretreating the catalyst hydrothermally stabilizes it against morphological changes, yielding repeatable CL yields. Altogether, this study discloses a heterogeneous catalyst capable of producing repeatable equilibrium CL yields via PA6 hydrolysis under industrially relevant reaction temperatures and times (<3 h, 250–330 °C).

depolymerization↗

BETO 2021 Peer Review - Separations in Support of Arresting Anaerobic Digestion

In support of the Bioenergy Technologies Office in converting waste feedstocks to fuels and chemicals, this project develops and demonstrates an advanced system for the production of platform carboxylic acids by Arresting Anaerobic Digestion (AAD) of wet waste feedstocks. The project addresses three technology barriers in developing the bioeconomy; (1) Feedstock availability and cost (2) Selective separation of organic acid species, and (3) First-of-a-kind technology development. This project has developed an advanced AAD system with separations that can operate in high solids environments (> 10 wt.%) and is net positive in energy consumption compared to the energy content of the carboxylic acids. Operating an in situ product recovery (ISPR) system in high solids is required for fermentation produced intermediates beyond ethanol that have volatilities less than water (e.g. carboxylic acids). Carboxylic acids form a versatile platform for the production of renewable diesel fuel, aviation fuel, monomers, and chemicals. A high solids ISPR system expands the feedstocks for AAD, which have been restricted to thin stillage, to solid food waste. Additionally, current AAD technology employs separations that consume >200x the energy content of the produced acids. This project has developed and demonstrated the first AAD technology with ISPR that is net negative in energy value and operates in solids contents >10 wt.% to produce a mixed carboxylic acid product that is carbon negative.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Oxidative Catalytic Fractionation of Lignocellulosic Biomass under Non-alkaline Conditions

Biomass pretreatment methods are commonly used to isolate carbohydrates from biomass, but they often lead to modification, degradation, and/or low yields of lignin. Catalytic fractionation approaches provide a possible solution to these challenges by separating the polymeric sugar and lignin fractions in the presence of a catalyst that promotes cleavage of the lignin into aromatic monomers. In this work, we demonstrate an oxidative fractionation method conducted in the presence of a heterogeneous non-precious-metal Co-N-C catalyst and O 2 in acetone as the solvent. The process affords a 15 wt% yield of phenolic products bearing aldehydes (vanillin, syringaldehyde) and carboxylic acids (p-hydroxybenzoic acid, vanillic acid, syringic acid), complementing the alkylated phenols obtained from existing reductive catalytic fractionation methods. The oxygenated aromatics derived from this process have appealing features for use in polymer synthesis and/or biological funneling to value-added products, and the non-alkaline conditions associated with this process support preservation of the cellulose, which remains insoluble at reaction conditions and is recovered as a solid.

09 BIOMASS FUELS↗

Synthesis of Ionic Ultramicroporous Polymers for Selective Separation of Acetylene from Ethylene

The design of highly stable and efficient porous materials is essential for developing breakthrough hydrocarbon separation methods based on physisorption to replace currently used energy-intensive distillation/absorption technologies. Efforts to develop advanced porous materials such as zeolites, coordination frameworks, and organic polymers have met with limited success. Here, a new class of ionic ultramicroporous polymers (IUPs) with high-density inorganic anions and narrowly distributed ultramicroporosity is reported, which are synthesized by a facile free-radical polymerization using branched and amphiphilic ionic compounds as reactive monomers. A covalent and ionic dual-crosslinking strategy is proposed to manipulate the pore structure of amorphous polymers at the ultramicroporous scale. The IUPs exhibit exceptional selectivity (286.1–474.4) for separating acetylene from ethylene along with high thermal and water stability, collaboratively demonstrated by gas adsorption isotherms and experimental breakthrough curves. Modeling studies unveil the specific binding sites for acetylene capture as well as the interconnected ultramicroporosity for size sieving. Finally, the porosity-engineering protocol used in this work can also be extended to the design of other ultramicroporous materials for the challenging separation of other key gas constituents.

36 MATERIALS SCIENCE↗

Production of Renewable Solvents and Monomers from Lignocellulosic Feedstocks

Lignocellulosic biomass is pretreated and broken down into cellulosic sugars. The cellulosic sugars are converted to mevalonolactone (MVL) using Visolis’ proprietary microbes. The MVL containing broth is separated from the cells, deashed-decolorized, concentrated and fed into a catalytic reactor to develop anhydro mevalonolactone (aMVL), and 3-methyl pentanediol (3MPD). The products were separated by distillation into high purity compounds as solvent or polymer applications.

3-methyl pentanediol, polymer, solvent↗

Microphase Separation in Polyelectrolyte Blends: Weak Segregation Theory and Relation to Nuclear "Pasta".

We develop the weak segregation theory of micro phase separation in stoichiometric blends of oppositely and weakly charged polyelectrolytes, which would be immiscible in the absence of charged units. Short-range repulsions between polycation and polyanion monomers induce the formation of oppositely charged domains, the size of which is controlled by their excess Coulomb energy. The diagram of blend morphologies is constructed in the framework of Leibler's mean-field approach and to account for fluctuations within the Brazovskii-Fredrickson-Helfand approximation. Phase behavior of the polyelectrolyte blends is fully analogous to that of neutral diblock copolymers. The mean-field analysis predicts that the order-disorder transition (ODT) is second order for the symmetric blend. In asymmetric mixtures, an increasing incompatibility between polyelectrolytes triggers the usual cascade of first-order phase transitions, dis -> bcc -> hex -> lam. Fluctuations alter the phase diagram topology and allow the direct transitions from the disordered state (dis) to hex and lam microphases; for the symmetric blend, ODT becomes weakly first order. We also discuss that both microphase separation in polyelectrolyte blends and the formation of nuclear "pasta" phases within neutron stars are governed by similar physical principles, despite the 6 orders of magnitude difference in the periods of these structures.

Rumyantsev, Artem M.↗

Gamma-Ray-Induced Formation of Uranyl Peroxide Cage Clusters

Aqueous solutions of lithium uranyl triperoxide, Li 4 [UO 2 (O 2 ) 3 ] (LiUT), were irradiated with gamma rays at room temperature and found to form the uranyl peroxide cage cluster, Li 24 [(UO 2 )(O 2 )(OH)] 24 (Li–U 24 ). Raman spectroscopy and 18 O labeling were used to identify the Raman-active vibrations of LiUT. With these assignments, the concentration of LiUT was tracked as a function of radiation dose. A discrepancy between monomer removal and cluster formation suggests that the reaction proceeds by the assembly of an intermediate. Non-negative matrix factorization was used to separate Raman spectra into components and resulted in the identification of a unique intermediate species. Much of the conversion appears to be driven by water radiolysis products, particularly the hydroxyl radical. Furthermore, this differs from the 18 O-labeled copper-catalyzed formation of U 24 , which progresses at a steady rate with no observation of intermediates. Li–U 24 in solution decomposes at high radiation doses resulting in a solid insoluble product similar to Na-compreignacite, Na 2 (UO 2 ) 6 O 4 (OH) 6 ·7H 2 O, which contains uranyl oxyhydroxy sheets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Salt Transport in Crosslinked Hydrogel Membranes Containing Zwitterionic Sulfobetaine Methacrylate and Hydrophobic Phenyl Acrylate

Produced water is a by-product of industrial operations, such as hydraulic fracturing for increased oil recovery, that causes environmental issues since it includes different metal ions (e.g., Li+, K+, Ni2+, Mg2+, etc.) that need to be extracted or collected before disposal. To remove these substances using either selective transport behavior or absorption-swing processes employing membrane-bound ligands, membrane separation procedures are promising unit operations. This study investigates the transport of a series of salts in crosslinked polymer membranes synthesized using a hydrophobic monomer (phenyl acrylate, PA), a zwitterionic hydrophilic monomer (sulfobetaine methacrylate, SBMA), and a crosslinker (methylenebisacrylamide, MBAA). Membranes are characterized according to their thermomechanical properties, where an increased SBMA content leads to decreased water uptake due to structural differences within the films and to more ionic interactions between the ammonium and sulfonate moieties, resulting in a decreased water volume fraction, and Young’s modulus increases with increasing MBAA or PA content. Permeabilities, solubilities, and diffusivities of membranes to LiCl, NaCl, KCl, CaCl2, MgCl2, and NiCl2 are determined by diffusion cell experiments, sorption-desorption experiments, and the solution-diffusion relationship, respectively. Permeability to these metal ions generally decreases with an increasing SBMA content or MBAA content due to the corresponding decreasing water volume fraction, and the permeabilities are in the order of K+ > Na+ > Li+ > Ni2+ > Ca2+ > Mg2+ presumably due to the differences in the hydration diameter.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Modulating metal-centered dimerization of a lanthanide chaperone protein for separation of light lanthanides

Elucidating details of biology’s selective uptake and trafficking of rare earth elements, particularly the lanthanides, has the potential to inspire sustainable biomolecular separations of these essential metals for myriad modern technologies. Here, we biochemically and structurally characterize Methylobacterium (Methylorubrum) extorquens LanD, a periplasmic protein from a bacterial gene cluster for lanthanide uptake. This protein provides only four ligands at its surface-exposed lanthanide-binding site, allowing for metal-centered protein dimerization that favors the largest lanthanide, La III . However, the monomer prefers Nd III and Sm III , which are disfavored lanthanides for cellular utilization. Structure-guided mutagenesis of a metal-ligand and an outer-sphere residue weakens metal binding to the LanD monomer and enhances dimerization for Pr III and Nd III by 100-fold. Selective dimerization enriches high-value Pr III and Nd III relative to low-value La III and Ce III in an all-aqueous process, achieving higher separation factors than lanmodulins and comparable or better separation factors than common industrial extractants. Finally, we show that LanD interacts with lanmodulin (LanM), a previously characterized periplasmic protein that shares LanD’s preference for Nd III and Sm III . Our results suggest that LanD’s unusual metal-binding site transfers less-desirable lanthanides to LanM to siphon them away from the pathway for cytosolic import. The properties of LanD show how relatively weak chelators can achieve high selectivity, and they form the basis for the design of protein dimers for separation of adjacent lanthanide pairs and other metal ions.

lanthanide biochemistry↗

Tuning Photoexcited Charge Transfer in Imine-Linked Two-Dimensional Covalent Organic Frameworks

The generation of a long-lived charge-separated state in versatile π-conjugated two-dimensional covalent organic frameworks (2D COFs), a process essential to extending their great potentials in advanced semiconducting applications, is yet fully elucidated. Herein, we report a systematic investigation of the photophysical properties of three highly crystalline imine-linked 2D COFs using steady-state and transient absorption spectroscopy accompanied by time-dependent density functional theory (TDDFT) calculations. The different electron affinity between 5,5',5''-(1,3,5-benzenetriyl)-tris(2-pyridinecarboxaldehyde) (BTPA) and three tunable electron-donating/accepting triamine monomers dominated the formation of the excited state, charge transfer direction and lifetime. A prominent charge transfer from electron-rich 4,4',4''-triaminotriphenylamine (TAPA) to BTPA in COFTAPA-BTPA led to the long-lived charge-separated state, which was attributed to a greater degree of delocalization compared to the two other COFs. Furthermore, these results provide fundamental insight into the importance of structure-property correlation for designing advanced photoactive 2D COF materials with the efficient charge transfer and long-lived charge-separated state.

14 SOLAR ENERGY↗

Improved Syntheses of 4'-Vinylbenzo-3 n -Crown- n Ethers ( n = 5–7)

We report a convenient, high-yielding, and scalable synthetic approach to the construction of crown ether monomers has been developed. Using this method, a wide-ranging class of polymerizable crown ethers can be efficiently obtained. The identity of the crown ethers was further established using single-crystal X-ray diffraction studies. Two of the vinylbenzocrown ethers crystallize with water, affording infinite supramolecular assemblies containing hydrogen-bonded water molecules. The crown ethers described in this manuscript will be used as host molecules in separation science.

36 MATERIALS SCIENCE↗