SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The Jet Propulsion Laboratory's (JPL) Advanced Multi-Mission Operations System (AMMOS) system processes data received from deep-space spacecraft, where error rates are high, bit rates are low, and every bit is precious. Frame synchronization and data extraction as performed by AMMOS enhanced data acquisition and reliability for maximum data return and validity.
This paper talks about developing multi-mission architecture for astronomical observatory scheduling.
Scalable Integrated Multi-Mission Support System (SIMSS) Simulator Release 2.0 software is designed to perform a variety of test activities related to spacecraft simulations and ground segment checks. This innovation uses the existing SIMSS framework, which interfaces with the GMSEC (Goddard Mission Services Evolution Center) Application Programming Interface (API) Version 3.0 message middleware, and allows SIMSS to accept GMSEC standard messages via the GMSEC message bus service. SIMSS is a distributed, component-based, plug-and-play client-server system that is useful for performing real-time monitoring and communications testing. SIMSS runs on one or more workstations, and is designed to be user-configurable, or to use predefined configurations for routine operations. SIMSS consists of more than 100 modules that can be configured to create, receive, process, and/or transmit data. The SIMSS/GMSEC innovation is intended to provide missions with a low-cost solution for implementing their ground systems, as well as to significantly reduce a mission s integration time and risk.
Multi-mission Earth Entry Vehicle (MMEEV) is designed to deliver small payloads from space to Earth's surface by flying an uncontrolled ballistic entry, which ends with ground impact. The included range of entry velocities is from 10 to 16 km/s. The range of ballistic coefficients is from 41.94 to 128.74 kg/m2, which insures a low subsonic terminal velocity on the order of 50 m/sec. The range of entry flight path angles, considered in this analysis is from -5 to -25 degrees. The assessment and parametric characterization of aeroheating and aerodynamic performance of the capsule during entry is the subject of this paper.
In this paper, we describe the development roadmap and discuss the various challenges of an evolvable and extensible multi-mission telecom planning and analysis framework. Our long-term goal is to develop a set of powerful flexible telecommunications analysis tools that can be easily adapted to different missions while maintain the common Deep Space Communication requirements. The ability of re-using the DSN ground models and the common software utilities in our adaptations has contributed significantly to our development efforts measured in terms of consistency, accuracy, and minimal effort redundancy, which can translate into shorter development time and major cost savings for the individual missions. In our roadmap, we will address the design principles, technical achievements and the associated challenges for following telecom analysis tools (i) Telecom Forecaster Predictor - TFP (ii) Unified Telecom Predictor - UTP (iii) Generalized Telecom Predictor - GTP (iv) Generic TFP (v) Web-based TFP (vi) Application Program Interface - API (vii) Mars Relay Network Planning Tool - MRNPT.
The Multi-Mission System Architecture Platform (MSAP) project aims to develop a system of hardware and software that will provide the core functionality necessary in many JPL missions and can be tailored to accommodate mission-specific requirements. The MSAP flight hardware is being developed in the Verilog hardware description language, allowing developers to simulate their design before releasing it to a field programmable gate array (FPGA). FPGAs can be updated in a matter of minutes, drastically reducing the time and expense required to produce traditional application-specific integrated circuits. Bench test equipment connected to the FPGAs can then probe and run Tcl scripts on the hardware. The Verilog and Tcl code can be reused or modified with each design. These steps are effective in confirming that the design operates according specifications.
The concept of using a solar-electric upper stage for multi-mission application is practical, economical, and versatile approach to space expMission capabilities include a Mercury orbiter, asteroid and comet rendezvous, a solar probe, and extra-ecliptic probe, and outer planet flybys and orbiters. The 17.5-kw vehicle has an injected mass of 1500 to 2500 kg and carries up to 500 kg of attached or separable payload packages. Mission characteristics, performance tradeoffs and a concepegn configuration are presented, and program plans, cost estimates and advanced technology requirements are identified.
The Multi-Mission System Architecture Platform (MSAP) represents an effort to bolster efficiency in the spacecraft design process. By incorporating essential spacecraft functionality into a modular, expandable system, the MSAP provides a foundation on which future spacecraft missions can be developed. Once completed, the MSAP will provide support for missions with varying objectives, while maintaining a level of standardization that will minimize redesign of general system components. One subsystem of the MSAP, the Remote Engineering Unit (REU), functions by gathering engineering telemetry from strategic points on the spacecraft and providing these measurements to the spacecraft's Command and Data Handling (C&DH) subsystem. Before the MSAP Project reaches completion, all hardware, including the REU, must be verified. However, the speed and complexity of the REU circuitry rules out the possibility of physical prototyping. Instead, the MSAP hardware is designed and verified using the Verilog Hardware Definition Language (HDL). An increasingly popular means of digital design, HDL programming provides a level of abstraction, which allows the designer to focus on functionality while logic synthesis tools take care of gate-level design and optimization. As verification of the REU proceeds, errors are quickly remedied, preventing costly changes during hardware validation. After undergoing the careful, iterative processes of verification and validation, the REU and MSAP will prove their readiness for use in a multitude of spacecraft missions.
The mission of the Center for Space Integrated Microsystem (CSIM) at the Jet Propulsion Laboratory is to develop advanced avionics systems for future deep space missions. The Advanced Micro Spacecraft (AMS) task is building a multi-mission testbed facility to enable the infusion of CSIM technologies into future missions. The testbed facility will also perform experimentation for advanced avionics technologies and architectures to meet challenging power, performance, mass, volume, reliability, and fault tolerance of future missions. The testbed facility has two levels of testbeds: (1) a Proof-of-Concept (POC) Testbed and (2) an Engineering Model Testbed. The methodology of the testbed development and the process of technology infusion are presented in a separate paper in this conference. This paper focuses only on the design, implementation, and application of the POC testbed. Additional information is contained in the original extended abstract.
The addition of the Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) to the Mars Science Laboratory (MSL) Rover requires an advanced thermal control system that is able to both recover and reject the waste heat from the MMRTG as needed in order to maintain the onboard electronics at benign temperatures despite the extreme and widely varying environmental conditions experienced both on the way to Mars and on the Martian surface. Based on the previously successful Mars landed mission thermal control schemes, a mechanically pumped fluid loop (MPFL) architecture was selected as the most robust and efficient means for meeting the MSL thermal requirements. The MSL heat recovery and rejection system (HRS) is comprised of two Freon (CFC-11) MPFLs that interact closely with one another to provide comprehensive thermal management throughout all mission phases. The first loop, called the Rover HRS (RHRS), consists of a set of pumps, thermal control valves, and heat exchangers (HXs) that enables the transport of heat from the MMRTG to the rover electronics during cold conditions or from the electronics straight to the environment for immediate heat rejection during warm conditions. The second loop, called the Cruise HRS (CHRS), is thermally coupled to the RHRS during the cruise to Mars, and provides a means for dissipating the waste heat more directly from the MMRTG as well as from both the cruise stage and rover avionics by promoting circulation to the cruise stage radiators. A multifunctional structure was developed that is capable of both collecting waste heat from the MMRTG and rejecting the waste heat to the surrounding environment. It consists of a pair of honeycomb core sandwich panels with HRS tubes bonded to both sides. Two similar HX assemblies were designed to surround the MMRTG on the aft end of the rover. Heat acquisition is accomplished on the interior (MMRTG facing) surface of each HX while heat rejection is accomplished on the exterior surface of each HX. Since these two surfaces need to be at very different temperatures in order for the fluid loops to perform efficiently, they need to be thermally isolated from one another. The HXs were therefore designed for high in-plane thermal conductivity and extremely low through-thickness thermal conductivity by using aluminum facesheets and aerogel as insulation inside a composite honeycomb core. Complex assemblies of hand-welded and uniquely bent aluminum tubes are bonded onto each side of the HX panels, and are specifically designed to be easily mated and demated to the rest of the RHRS in order to ease the integration effort.
This paper details an architectural description of the Mission Data Processing and Control System (MPCS), an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is developed based on a set of small reusable components, implemented in Java, each designed with a specific function and well-defined interfaces. An industry standard messaging bus is used to transfer information among system components. Components generate standard messages which are used to capture system information, as well as triggers to support the event-driven architecture of the system. Event-driven systems are highly desirable for processing high-rate telemetry (science and engineering) data, and for supporting automation for many mission operations processes.
This report describes an integrated system for Multi-mission System Analysis for Planetary Entry (M-SAPE). The system in its current form is capable of performing system analysis and design for an Earth entry vehicle suitable for sample return missions. The system includes geometry, mass sizing, impact analysis, structural analysis, flight mechanics, TPS, and a web portal for user access. The report includes details of M-SAPE modules and provides sample results. Current M-SAPE vehicle design concept is based on Mars sample return (MSR) Earth entry vehicle design, which is driven by minimizing risk associated with sample containment (no parachute and passive aerodynamic stability). By M-SAPE exploiting a common design concept, any sample return mission, particularly MSR, will benefit from significant risk and development cost reductions. The design provides a platform by which technologies and design elements can be evaluated rapidly prior to any costly investment commitment.
In depth studies conducted over the past two years have established a modular nuclear stage concept which offers multi-mission capability with a maximum of hardware commonality, i.e., a concept which minimizes total hardware development effort and investment in facilities while providing a logical development evolution from ground test systems to flight test and from initial to more ambitious space applications. Recent results oriented toward the definition and application of such a vehicle concept for the manned Mars landing mission are presented. The basic modular concept employing NERVA nuclear rocket engines is reviewed and the mission peculiar factors affecting the module sizes and number of modules required are discussed. Specific results presented are restricted primarily to the 1982 Mars landing mission via the opposition class mission mode since this is the earliest anticipated date for such a mission. The realistic effects of orbital launch windows are considered and brief discussions of orbital assembly and packaging options with a modular approach are given. Typical ground launch and orbital assembly operations are defined assuming an uprated Saturn V class launch vehicle and the connecting mode of orbital assembly, in which all modules are orbited fully loaded with propellant. The effect of a significant increase in nuclear engine specific impulse is discussed.
This viewgraph presentation reviews the architectural description of the Mission Data Processing and Control System (MPCS). MPCS is an event-driven, multi-mission ground data processing components providing uplink, downlink, and data management capabilities which will support the Mars Science Laboratory (MSL) project as its first target mission. MPCS is designed with these factors (1) Enabling plug and play architecture (2) MPCS has strong inheritance from GDS components that have been developed for other Flight Projects (MER, MRO, DAWN, MSAP), and are currently being used in operations and ATLO, and (3) MPCS components are Java-based, platform independent, and are designed to consume and produce XML-formatted data
The goal of NASAs Radioisotope Power Systems (RPS) Program is to make RPS ready and available to support the exploration of the solar system in environments where the use of conventional solar or chemical power generation is impractical or impossible to meet the needs of the missions. To meet this goal, the RPS Program, working closely with the Department of Energy, performs mission and system studies (such as the recently released Nuclear Power Assessment Study), evaluates the readiness of promising technologies to infuse in future generators, assesses the sustainment of key RPS capabilities and knowledge, forecasts and tracks the Programs budgetary needs, and disseminates current information about RPS to the community of potential users. This presentation focuses on the needs of the mission community and provides users a better understanding of how to integrate the MMRTG (Multi-Mission Radioisotope Thermoelectric Generator).
Explore the source record for details and available documents.
Study of the multimission capability of a solar electric propulsion spacecraft. The study includes such factors as spacecraft constraints, payload variations with launch opportunity, propellant on-loading and off-loading requirements, and limitations in thrusting time, throttling range and steering. The study determined that a single spacecraft design, with P sub zero = 12 kW and I sub s = 3000 sec launched by a Titan IIIC or Titan IIID/Centaur can be used to conduct at least five diverse missions: Eros rendezvous, 1 AU out-of-ecliptic, Mercury orbiter, Jupiter flyby/probe, and Jupiter orbiter. Flight time and injection velocity vary as needed to achieve the desired payload capability. The mission analysis approach and results are presented.
The Mars Science Laboratory (MSL) Curiosity rover has been operating on Mars using the F1 Multi-Mission Radioisotope Thermoelectric Generator (MMRTG) for over one and one-half Mars years (over three Earth years). During this extended period, Curiosity has provided a wealth of information about operating with a MMRTG in the Mars surface environment. This paper discusses MMRTG performance over the life of the mission as affected not only by expected radioisotope degradation, but also by the thermal environment, including seasonal, wind, and time-of-sol effects. Additionally, issues related to MMRTG internal shorts will be discussed including detection, impacts on operations, and clearing the shorts.