Search NASA⌕ Search

SEARCH · Search NASA

Results for “multiple components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Liquid drop technique for generation of organic glass and metal shells

It was found that liquid drop techniques are very useful in several diverse areas. For producing very uniform metallic, organic, inorganic and, on particular, glassy shells, the liquid jet method is the most reproducible and exceptionally useful of all the techniques studied. The technique of capillary wave synchronization of the break-up of single and multiple component jets was utilized to produce uniform sized liquid drops and solid particles, and hollow liquid and solid shells. The technique was also used to encapsulate a number of liquids in impermeable spherical shells. Highly uniform glass shells were made by generating uniform drops of glass forming materials in an aqueous solution, subsequently evaporating the water, and then fusing and blowing the remaining solids in a high temperature vertical tube furnace. Experimental results are presented and the critical problems in further research in this field are discussed.

Hendricks, C. D.↗

Design and verification of a multiple fault tolerant control system for STS applications using computer simulation

General Dynamics/Convair is under NASA contract to integrate the Centaur upper stage into the space transportation system for future planetary missions. This requires that control of all safety critical functions be two-failure tolerant. The control system developed consists of five asynchronous computers, each contributing at their outputs to a 3-out-of-5 voting plane. Subsystem control is based on an end function redundancy management scheme. Analysis of multiple component failures and worst-case time-phase asynchrony among the computers is performed by a real-time computer simulation. The simulation emulates the hardware and subsystem interfaces, wire by wire, providing assessibility to any component for the insertion of preprogrammed failures. Observability is provided via a graphics system and diagnostic software. The simulation provides an engineering tool where the integrity of control system hardware and imbedded software can be demonstrated.

Szatkowski, G. P.↗

Real-time computer simulation/emulation for verification of multi-fault-tolerant control of Centaur-in-Shuttle

NASA has contracted with General Dynamics to design and develop an advanced Centaur liquid upper stage for support of the Galileo and Solar Polar interplanetary missions in 1985-86. The control of the Centaur while it resides in the Shuttle cargo bay must meet the STS safety requirements to be dual failure tolerant in all mission critical functions. The demonstration of the integrity of this control system in the event of multiple component failures and worst-case time-phase asynchroniety among the system's computers is performed by a real-time computer simulation. The simulation emulates the control hardware, subsystem interfaces, and imbedded software processes, wire-by-wire, to provide accessibility for fault insertion. Observability is provided via graphics and diagnostic software. Verification is the product of Monte Carlo simulation analysis.

Szatkowski, G. P.↗

Metallic and metalloceramic coating by thermal decomposition

Metallic and metalloceramic coatings were prepared by thermal decomposition of a number of inorganic and metallo-organic compounds. The compounds were applied by spraying and by immersion, especially on ceramic fibers and fiber forms, which are easily coated by this procedure. Penetration of low-density ceramics is examined, and procedures are described that were used for converting the deposited materials to metals, oxides, or metal oxide films. Multiple-component films were also prepared. Photomicrographs illustrate the structure of these films.

Hendricks, R. C.↗

Effects of NO3(-) and NH4(+) and urea on each other's uptake and incorporation

The purpose was to determine the optimal use by wheat plants of the N sources expected from processing biological waste products, NO3(-),NO2(-)NH4(+), and urea. The approach was to determine the uptake and metabolic products of each N source (from single and multiple component solutions), inhibitory effects of each, feedback inhibition, and overall in vivo regulation of the rates of assimilation of each by wheat plants. Previously, researchers determined the interactions of NO3(-),NO2(-),NH4(+) on each other's uptake and incorporation. The assimilation and some of its effects on NO3(-) and NH4(+) assimilation which have been completed to data are discussed.

Huffaker, R. C.↗

A deep H-alpha image of faint Balmer-line filaments in the northeast Cygnus Loop supernova remnant

A deep H-alpha image of a field outside the optically bright northeast limb of the Cygnus Loop supernova remnant is presented. Two filaments which are just visible on the red POSS print form part of two long and unbroken lines of filaments which generally bound a region of diffuse emission and fainter filaments. However, the diffuse emission extends out to a newly detected line of extremely faint filaments 3 arcmin to the northeast. The brightest filaments are resolved into multiple components with widths less than 2 arcsec. Comparison with the POSS print leads to a rough estimate of the proper motion of 6 arcsec per century, although temporal variations in the relative brightnesses of the components of a filament could confuse attempts to more accurately measure the true proper motion. The morphology of the emission strongly suggests that it arises in a single large sheet. No direct evidence is found favoring the existence of the dense cloud cores which have been hypothesized as a way of evaporatively enhancing the X-ray emissivity and producing forbidden line emission in the filaments.

Hester, J. J.↗

High spectral resolution Fabry-Perot interferometer measurements of Comet Halley at H-alpha and 6300 A

A 40.6-cm Newtonian telescope was interfaced to the Fabry-Perot interferometer at the Arecibo Observatory to make high-spectral-resolution measurements of Comet Halley emissions at 6562.72 A (H-alpha) and 6300.3 A (O I). The atomic hydrogen outflow velocity was found to be approximately 7.9 + or - 1.0 km/s. In general, the H-alpha spectra are highly structured, and indicative of a multiple component atomic hydrogen velocity distribution. For O (1D), implied production rates of 6.44 + or - 3.0 x 10 to the 28th/s and 5.66 + or - 2.7 x 10 to the 28th/s were found on March 15 and 17, respectively.

Kerr, R. B.↗

Thermal Response Of Composite Insulation

Engineering model gives useful predictions. Pair of reports presents theoretical and experimental analyses of thermal responses of multiple-component, lightweight, porous, ceramic insulators. Particular materials examined destined for use in Space Shuttle thermal protection system, test methods and heat-transfer theory useful to chemical, metallurgical, and ceramic engineers needing to calculate transient thermal responses of refractory composites.

Stewart, David A.↗

Pb, Sr, and Nd isotopes in basalts and sulfides from the Juan de Fuca Ridge

Isotopic Pb, Sr, and Nd data were collected by the Alvin submersible from seven basalt glasses in the southern Juan de Fuca Ridge (JFR), giving similar ratios for Pb-206/Pb-204 of about 18.45, for Pb-207/Pb-204 of about 15.47, for Pb-208/Pb-204 of about 37.81, for Sr-87/Sr-86 of about 0.70249, and for Nd-143/Nd-144 of about 0.51315. Data suggest that the basalts are all cogenetic, and that four of the samples are also comagmatic. It is concluded that isotopic data for the JFR and seamount basalts provide additional support for the mantle blob cluster model (Allegre et al., 1984), suggesting the involvement of multiple components in the genesis of ridge basalts, and including an unusual end-member that has nonradiogenic Sr and variable Pb-206/Pb-204 isotopic compositions.

Hegner, E.↗

The velocity structure and turbulence at the center of the Orion Nebula

Using the Coude Feed System of the Kitt Peak National Observatory at its highest possible dispersion and a CCD detector with wide dynamic range it was possible to examine in detail the radial and turbulent velocities of the Orion Nebula at the seeing limit. For the first time, multiple components of the spectral lines were resolved and the Gaussian profiles fit to them. Using four different observing runs, two circular areas 2 minutes in diameter were observed, the first centered on the theta sup 1 Orionis and the second centered on theta sup 2 Orionis. The velocity resolution of 1 km/s combined with the angular resolution of 2 seconds allowed observation in detail at line splitting as well as the location and measurement of high internal motions, about -50 km/s with respect to the bulk of ionized matter. Because over 900 different positions were measured, modern statistical techniques were used for the analysis of turbulence, so that the dispersion relation and the structure function could be calculated and compared with predictions of the Kolmogorov theory. The random motions showed correlation with spatial separation, as expected for turbulence; but comparison with predictions of the classical theory for nebular turbulence showed poor agreement. If Kolmogorov theory applies, then the energy must be input at many scales.

Castaneda, Hector O.↗

The evolution of low ionization QSO absorption systems

A CCD spectroscopic survey of Mg II and Mg I absorption lines in a C IV selected sample of 35 metal systems, observed toward 12 QSOs between z = 1.1 and z = 2.1, is reported. Six Mg I and 10 Mg II absorption lines are detected in 33 C IV clouds, and some peculiarities are noted. The complex or asymmetric line profiles reveal that multiple components are present and that variations in the C IV/Mg II and Mg II/Mg I ratio may occur often from one component to another with a velocity separation less than the velocity resolution of about 100 km/s. Comparison with the Mg II absorption-line statistics at z-bar = 0.5 implies that, at z-bar = 1.6, there are more strong absorbers per unit z with W(2796) greater than 0.6 A and fewer weak absorbers. The evolutionary parameter gamma appears to depend on W(min): its value drops as W(min) is reduced and is negative at W(min) = 0.15 A. This suggests a different redshift evolution for the population of weak and strong Mg II absorbers.

Caulet, Adeline↗

Monitoring and control of spacecraft systems using procedural reasoning

Research concerned with automating the monitoring and control of spacecraft systems is discussed. In particular, the application of SRI's Procedural Reasoning System (PRS) to the handling of malfunctions in the Reaction Control System (RCS) of NASA's Space Shuttle is examined. Unlike traditional monitoring and control systems, PRS is able to reason about and perform complex tasks in a very flexible and robust manner, somewhat in the manner of a human assistant. Using various RCS malfunctions as examples (including sensor faults, leaking components, multiple alarms, and regulator and jet failures), it is shown how PRS manages to combine both goal-directed reasoning and the ability to react rapidly to unanticipated changes in its environment. In conclusion, some important issues in the design of PRS are reviewed and future enhancements are indicated.

Georgeff, Michael P.↗

Real-time reasoning - The monitoring and control of spacecraft systems

Research concerned with automating the monitoring and control of spacecraft systems is discussed. In particular, the application the Procedural Reasoning System (PRS) to the handling of malfunctions in the Reaction Control System (RCS) of NASAs space shuttle is studied. Unlike traditional monitoring and control systems, PRS is able to reason about and perform complex tasks in a very flexible and robust manner, somewhat in the manner of a human assistant. Using various RCS malfunctions as examples (including sensor faults, leaking components, multiple alarms, and regulator and jet failures), it is shown how PRS manages to combine both goal-directed reasoning and the ability to react rapidly to unanticipated changes in its environment. Some important issues in the design of PRS are reviewed, and future enhancements are indicated.

Georgeff, Michael P.↗

Numerical propulsion system simulation

The cost of implementing new technology in aerospace propulsion systems is becoming prohibitively expensive. One of the major contributors to the high cost is the need to perform many large scale system tests. Extensive testing is used to capture the complex interactions among the multiple disciplines and the multiple components inherent in complex systems. The objective of the Numerical Propulsion System Simulation (NPSS) is to provide insight into these complex interactions through computational simulations. This will allow for comprehensive evaluation of new concepts early in the design phase before a commitment to hardware is made. It will also allow for rapid assessment of field-related problems, particularly in cases where operational problems were encountered during conditions that would be difficult to simulate experimentally. The tremendous progress taking place in computational engineering and the rapid increase in computing power expected through parallel processing make this concept feasible within the near future. However it is critical that the framework for such simulations be put in place now to serve as a focal point for the continued developments in computational engineering and computing hardware and software. The NPSS concept which is described below will provide that framework.

R.W. Claus↗

Optical alignments of the Cosmic Background Explorer (COBE) observatory

The angular alignments and stabilities of multiple components in a single coordinate system were determined using various alignment tooling techniques. These techniques use autocollimation measurements with a first order theodolite and transformation of coordinates to determine the relative alignment between various components with respect to a common set of COBE spacecraft coordinate axes. Optical-mechanical alignment techniques were also used to integrate the flight COBE observatory attitude control system module that consists of gyros, reaction wheels, and a momentum wheel. Particular attention is given to the techniques for alignments and stabilities of the earth scanners, sun sensors, far IR absolute spectrophotometer, Diffuse Infrared Background Experiment, and differential microwave radiometer antenna horn boresights.

Sampler, Henry P.↗

A hybrid structured-unstructured grid method for unsteady turbomachinery flow computations

A hybrid grid technique for the solution of 2D, unsteady flows is developed. This technique is capable of handling complex, multiple component geometries in relative motion, such as those encountered in turbomachinery. The numerical approach utilizes a mixed structured-unstructured zonal grid topology along with modeling equations and solution methods that are most appropriate in the individual domains, therefore combining the advantages of both structured and unstructured grid techniques.

Mathur, Sanjay R.↗

X-ray FE line studies

We present the first broadband, moderate-resolution X-ray spectral observations of the Seyfert galaxies NGC 4151 and NGC 1068. The Seyfert 1 galaxy NGC 4151 is shown to have a complex X-ray spectrum with multiple components and a strong, intrinsically narrow Fe K emission line. The characteristics of the scattering medium of the Seyfert 2 galaxy NGC 1068 are determined using the very strong Fe line emission and the lack of features due to oxygen in the X-ray spectrum. The soft X-ray flux from Mrk 3 and Mrk 348 are consistent with that expected from electron scattered X-rays from an obscured Seyfert 1 nucleus. A survey of the X-ray properties of Seyfert 2 galaxies indicates that a substantial fraction may have column densities of about 10 exp 23, suggesting that NGC 1068 has an unusually thick obscuring torus.

Marshall, F. E.↗

Discovery of new objects in the Orion nebula on HST images - Shocks, compact sources, and protoplanetary disks

We have reduced and analyzed a set of narrow-band HST images of a portion of M42 south of the Trapezium. Many new emission-line sources were found, some quite long but so narrow that they are not seen on ground-based images. These include thin shells which are high-ionization shocks. The structure around Orion HH 3 is resolved into multiple components. Slit spectroscopy data establish the high expansion velocities of all these regions. The other objects seen are compact sources. Although some had been detected in VLA surveys and several had been seen from the ground optically, the new images show previously undetected structure and clearly establish that most are protoplanetary disks, which are neutral disks surrounding low-mass pre-main-sequence stars and are ionized from the outside by Theta sup 1 C and Theta sup 2 A Ori.

O'Dell, C. R.↗