Search NASA⌕ Search

SEARCH · Search NASA

Results for “no cobalt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

LiNi x Fe y Al z O 2 , a new cobalt-free layered cathode material for advanced Li-ion batteries

Recently, rapid fluctuations in cobalt prices have created a worsening supply chain constraint that has become a serious cause of concern amidst global battery manufacturers. To address this challenge, we report herein a new class of cobalt-free, nickel-rich layered cathode material termed the NFA class with general formula LiNi x Fe y Al z O 2 (x + y + z = 1). Using co-precipitation reaction in a continuous stirred tank reactor, we synthesized NFA(OH) 2 precursors with the constituent Ni, Fe and Al elements successfully incorporated. The obtained LiNFAO 2 cathode was characterized using X-Ray diffraction, Mössbauer spectroscopy and scanning electron microscopy. Electrochemical behavior was assessed using cyclic voltammetry, galvanostatic charge/discharge, electrochemical impedance spectroscopy and galvanostatic intermittent titration technique at various states of lithiation/delithiation. Electrochemical performance evaluations revealed that our cobalt-free material delivers high capacity of 190 mAh/g at 0.1C. Rate and cycling performance evaluations also indicated good rate capability and cycling stability with 88% capacity retention after 100 cycles at C/3. Using NFA cathodes, we also fabricated a 0.5Ah (C/3) cobalt-free Li-ion battery which demonstrated reasonable cycling stability with ~72% capacity retained after 200 cycles. Overall, our work demonstrates the immense potential of the cobalt-free NFA class cathodes as viable candidates towards development of next generation cost effective lithium ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

Selective Ligand Modification of Cobalt Porphyrins for Carbon Dioxide Electrolysis: Generation of a Renewable H2/CO Feedstock for Downstream Catalytic Hydrogenation

Catalytic hydrogenation is an attractive approach to produce green fuels and chemicals. The building blocks for these processes may be effectively produced from renewable power via direct electrochemical reduction of carbon dioxide in an aqueous media. For the first time, the impact of increasing the local proton concentration of cobalt porphyrin was examined by synthesizing new cobalt porphyrins 2, Co(o-OCH3)TPP and cobalt porphyrin 3, Co(o-OH)TPP. Cobalt porphyrins coated on carbon paper converted carbon dioxide and water into a mixture of hydrogen and carbon monoxide in an aqueous electrolyte at near neutral pH. Increasing the local proton availability of the commercial cobalt porphyrin 1, accelerates hydrogen generation under heterogeneous conditions across the range of potentials tested (-0.85 to -1.5 V vs. Ag/AgCl) and demonstrates high Faradaic efficiencies (ca. 90%) at low over-potentials (ca. 540 mV). The culmination of this work can help identify key parameters that facilitate generation of sustainable reagents for catalytic hydrogenation under practical and scalable conditions.

BIOMASS FUELS,INORGANIC, ORGANIC, PHYSICAL, AND AN↗
DOE OSTI2023

Sterically attenuated electronic communication in cobalt complexes of meridional isoquinoline-derived ligands for applications in electrocatalysis

The ability to synthetically tune the ligand frameworks of redox-active molecules is of critical importance to the economy of solar fuels because manipulating their redox properties can afford control over the operating potentials of sustained electrocatalytic or photoelectrocatalytic processes. The electronic and steric properties of 2,2′:6′,2″-terpyridine (Terpy) ligand frameworks can be tuned by functional group substitution on ligand backbones, and these correlate strongly to their Hammett parameters. The synthesis of a new series of tridentate meridional ligands of 2,4,6-trisubstituted pyridines that engineers the ability to finely tune the redox potentials of cobalt complexes to more positive potentials than that of their Terpy analogs is achieved by aryl-functionalizing at the four-position and by including isoquinoline at the two- and six-positions of pyridine (Aryl-DiQ). Their cobalt complex syntheses, their electronic properties, and their catalytic activity for carbon dioxide (CO2) reduction are reported and compared to their Terpy analogs. The cobalt derivatives generally experience a positive shift in their redox features relative to the Terpy-based analogs, covering a complementary potential range. Although those evaluated fail to produce any quantifiable products for the reduction of CO2 and suffer from long-term instability, these results suggest possible alternate strategies for stabilizing these compounds during catalysis. We speculate that lower equilibrium association constants to the cobalt center are intrinsic to these ligands, which originate from a steric interaction between protons on the pyridine and isoquinoline moieties. Nevertheless, the new Aryl-DiQ ligand framework has been engineered to selectively tune homoleptic cobalt complexes’ redox potentials.

Chemistry↗
DOE OSTI2023

Surface Science Studies of Selective Fischer-Tropsch Chemistry on Cobalt Carbide Surfaces

Advances in catalysis science are critical to the progress of the United States. Catalysis is employed, in one way or another, in the production of almost every chemical and product manufactured. The catalysis research that we undertook here, regarding the role of specific facets of cobalt carbide in the Fischer-Tropsch production of low molecular weight olefins (FTO), is motivated by the work of many previous investigators. In particular two research groups from China had discovered FTO catalysts that work very selectively for low molecular weight olefins coupled with low production of methane. These are potentially very important findings that could find significant industrial utility if improvements can be discovered. With the research undertaken here we chose to focus on one of these studies and especially the Co 2 C surfaces that they implicate as being responsible for this exciting FTO catalysis with low production of methane. In this study, Zhong and co-workers investigated cobalt-manganese oxide catalysts for the Fischer-Tropsch to Olefins process. After reaching steady-state their catalyst showed a good selectivity to light olefins and low selectivity to methane with a carbon monoxide conversion of 31.8% at one atmosphere (with a H 2 /CO ratio of two and a temperature of 250°C). Lower H 2 /CO ratios and lower pressures increased the olefin production. Their catalyst characterization studies indicated that cobalt carbide quadrangular nanoprisms with preferentially exposed (101) and (020) facets were important in favoring lower olefin production and inhibiting methane formation. The authors stated that these cobalt carbide nanoprisms are a promising new catalyst system for directly converting synthesis gas to lower olefins. Motivated by the studies of Zhong and co-workers, our goal with the research here was to contribute to a better understanding of catalysis science through the study of surface chemical reactions related to the Fischer-Tropsch to Olefins reaction on specific facets of planar model cobalt carbide catalysts in ultrahigh vacuum.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

High-Performance Low-Cobalt Cathode Materials for Li-ion Batteries

The layer-structured Li[Ni x Co y Mn 1-x-y ]O 2 (NCM) cathode materials have been the best choice for increasing electric vehicle driving distance per charge. The high Ni layered oxide represents successfully commercialized NCM cathodes (such as NCM622 and NCA) in lithium-ion batteries (LIBs) for EV applications due to their high energy density and acceptable cycling stability. However, the price of cobalt, the key element within LIBs for stability, has nearly tripled over the past few years due to increased demand from the cell phone industry. As mentioned in the DOE Funding Opportunity Announcement, the current materials shortage will also cause speculation for a future global shortage. Therefore, to meet the requirement and sustainability of the next-generation long-range and low-cost EVs, developing cathode materials with low-Co content to achieve higher energy density and lower cost is both essential and urgent. The overarching objective of this work is to develop stabilized NCM cathode materials with low Co content (namely LiNi x Co y Mn 1-x-y O 2 , y ≤ 0.04) to meet DOE’s goal of reducing Co loading below 50 mg Wh -1 while maintaining energy density greater than 600 Wh kg -1 based on cathode material. Via various dopings and coatings scalable methods, we explored and enhanced the cycling performance of low-cobalt cathodes. The final obtained NCM cathodes paired with graphite anode aim to deliver batteries with a high initial specific energy density of over 240 Wh kg -1 and a low capacity fading rate of less than 20% in 1000 cycles under a C/3 discharge rate. To accomplish this goal, a multidisciplinary team with several co-investigators has been formed from three organizations: The Pennsylvania State University (PSU), Oak Ridge National Laboratory (ORNL), and Pacific Northwest National Laboratory (PNNL). The PI and co-investigators are Dr. Donghai Wang (PI) from PSU with expertise in the synthesis of nanostructured materials and manipulation of interfacial properties of electrochemically active materials, Dr. Jagjit Nanda, with substantial knowledge of and expertise in state-of-the-art cathodes from ORNL, Dr. Chao-Yang Wang with significant experience in advanced cell design and fabrication and cell diagnostics from PSU, and Dr. Chongmin Wang with world-wide known expertise of advance atomic scale characterization of electrode materials from PNNL. Furthermore, this project will leverage and synergistically work with the current DOE-funded programs on battery materials at PSU and ORNL and electrode materials characterization at PNNL. During this funded period, we have accomplished milestones stated as follows: • Scale up production of LiFePO 4 (LFP) coated NCM811 with a production of 300g/batch. Fifteen (≥2 Ah) pouch cells with LFP-coated NCM811 cathode are delivered. Self-evaluated pouch cells in PSU show superior over 80% capacity retention performance even after 1500 cycles at C/3 rate. • Various cations (Al, Ti, Zr, and Mo) substitute cobalt in low-cobalt partially and Co-free cathodes. Their effects on crystal structure and electrochemical behavior are explored. • Phosphate compounds as coating materials represent promising surface protection precursors for low-cobalt cathode materials. Therefore, several metal phosphates were selected for improving the NMC cycling performance and are regarded as effective approaches for a scalable and practical surface protection method. • Production of NCM92, where Nickel content is 92% among transition metals, is scaled up from synthesis to coating and heat treatment procedures. Fifteen 2.7Ah pouch cells with Ti-doped NCM92 cathodes and industrial graphite anode are delivered to Idaho National Lab for testing.

25 ENERGY STORAGE↗
DOE OSTI2025

Cold Spray Cobalt Magnetostrictive Electromagnetic Acoustic Transducers for High Temperature Structure Monitoring

The Department of Energy’s Advanced Sensors and Instrumentation program seeks to develop and qualify advanced sensors for the nuclear industry. Reliable high temperature and high radiation sensors for detection and characterization of structural flaws in pipes, vessels, and structurally critical components is a weakness for both conventional light water reactors with coolant T-hot approaching 350oC, and for advanced reactors with T-hot temperatures in excess of 500 to 800oC. Magnetostrictive Electromagnetic Acoustic Transducers using a cold spray cobalt coating have been proposed as a sensor design that can withstand these kinds of temperatures and radiation levels to serve as online sensors to detect flaws before cracks, pits, or erosion/corrosion flaws progress to through-wall failures. This report tests cold spray cobalt as part of a magnetostrictive EMAT for high temperature service. Cobalt is known to have strong magnetostrictive properties however the effect of cold spray application is not well studied. This program was surprised to discover that cold sprayed cobalt exhibited little or no magnetostrictive behavior until it was thermally annealed. Following annealing to 650oC however, cold spray cobalt did exhibit a magnetostrictive response. Work to date prior to this milestone report publication showed that magnetostrictive EMAT was successfully tested to 400oC with an alnico permanent magnet. The program plans to extend testing with an electromagnet to higher temperatures. This follow-on work will be reported under subsequent publications or as a revision to this report.

Glass, Samuel W.↗
DOE OSTI2022

Methods of producing cobalt nanoparticles and hollow gold nanospheres and kits for practicing same

Provided are methods of producing cobalt nanoparticles (Co NPs). The methods include combining a cobalt salt, a capping agent, and a reducing agent, under Co NP synthesis conditions including a temperature selected to produce cobalt nanoparticles of a pre-selected diameter, where the temperature and pre-selected diameter are inversely related. In certain aspects, the methods further include producing hollow gold nano spheres (HGNs) using the cobalt nanoparticles as scaffolds. Also provided are cobalt nanoparticles and hollow gold nano spheres (HGNs) produced according to the present methods. Kits that find use in practicing the methods of the present disclosure are also provided.

Pu, Ying-Chih↗
DOE OSTI2023

Stabilizing the Interphase in Cobalt–Free, Ultrahigh–Nickel Cathodes for Lithium–Ion Batteries

High-nickel layered oxide cathodes, such as LiNi 1-x-y Mn x Co y O 2 (NMC) and LiNi 1-x-y Co x Al y O 2 (NCA), are at the forefront for implementation in high-energy-density lithium-ion batteries. The presence of cobalt in both cathode chemistries, however, largely deters their application due to fiscal and humanitarian issues affiliated with cobalt sourcing. Increasing the Ni content drives down the Co content, but introduces additional structural and electrochemical problems attributed to high-Ni cathodes. Herein a dually modified cobalt-free ultrahigh-nickel cathode 0.02B-LiNi 0.99 Mg 0.01 O 2 (NBM) is presented with 1 mol% Mg and 2 mol% B that exhibits a high initial 1C discharge capacity of 210 mA h g –1 with a 20% capacity retention improvement over 500 cycles when benchmarked against LiNiO 2 (LNO) in pouch full cell configurations with graphite anode. Postmortem analyses reveal the enhanced performance stems from reduced active lithium inventory loss and localized surface reactivity in the NBM cathode. Here, the stabilized cathode-electrolyte interphase subsequently reduces transition-metal dissolution and ensuing chemical crossover to the graphite anode, which prevents further catalyzed parasitic reactions that harmfully passivate the anode surface. Altogether, this study aims to highlight the importance of electrode characterization and analysis from an interphasial viewpoint and to push the ongoing research to stabilize cobalt-free ultrahigh-Ni cathodes for industrial feasibility.

25 ENERGY STORAGE↗
DOE OSTI2023

A High Energy–Density, Cobalt–Free, Low–Nickel LiNi 0.7 Mn 0.25 Al 0.05 O 2 Cathode with a High–Voltage Electrolyte for Lithium–Metal Batteries

Cobalt-free cathode materials have garnered increased attention for applications in next-generation batteries for electric vehicles, as cobalt is considered to have at a high supply chain risk. Here, the use of a localized saturated electrolyte (LSE) to enable stable cycling of a cobalt-free, low-nickel layered-oxide cathode LiNi 0.7 Mn 0.25 Al 0.05 O 2 (NMA-70) to higher voltages (4.6 V) in a lithium-metal battery is demonstrated. Compared to the baseline LP57 electrolyte, the LSE extends the cycle life from ≈100 cycles to ≈400 cycles before reaching 80% capacity retention. Visual indicators of cell degradation, such as product deposition, are observed on electrodes cycled in LP57. It is shown that cycling NMA-70 in LSE reduces the overall active material loss and overpotential growth during extended cycling. This is attributed to the formation of a beneficial fluorinated interphase layer, a lower degree of rock-salt phase formation, and a reduction in the gas evolution from the cathode surface. The decrease in gas evolution from the cathode cycled in LSE reflects a lower degree of electrolyte reactivity and an overall improvement in the safety characteristics of the cell. Furthermore, this study highlights the importance of a stable electrolyte to enable the high-voltage cycling of alternative, lower nickel, and cobalt-free cathodes.

25 ENERGY STORAGE↗
DOE OSTI2022

Heteroleptic Square Planar Cobalt(I/II) Complexes

Reduction of the cobalt(II) chloride complex, Ph 2 B( t BuIm) 2 Co(THF)Cl (1) in the presence of t BuN≡C affords the diamagnetic, square planar cobalt(I) complex Ph 2 B( t BuIm) 2 Co(C≡N t Bu) 2 (2). This is a rare example of a 16-electron cobalt(I) complex that is structurally related to square planar noble metal complexes. Accordingly, the electronic structure of 2, as calculated by DFT, reveals that the HOMO is largely d z 2 in character. Complex 2 is readily oxidized to its cobalt(II) congener [Ph 2 B( t BuIm) 2 Co(C=N t Bu) 2 ]BPh 4 (3-BPh 4 ), whose EPR spectral parameters are characteristic of low-spin d 7 with an unpaired electron in an orbital of d z 2 parentage. Further, this is also consistent with the results of DFT calculations. Despite its 16-electron configuration and the d z 2 parentage of the HOMO, the only tractable reactions of 2 involve one electron oxidation to afford 3.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Synthesis and characterization of the dinuclear cobalt(III) complex: [(C 2 F 5 ) 3 Co(μ-F)] 2 2–

Here, reaction of the versatile tris(perfluoroethyl) cobalt(III) precursor [fac-(MeCN) 3 Co(C 2 F 5 ) 3 ] with [NMe 4 ]F and [PPh 4 ]Cl in THF formed the unexpected cobalt(III) bridging fluoride dimer ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– . The new fluoro-organometallic cobalt(III) complex was characterized by NMR and UV-vis spectroscopies, X-ray crystallography, cyclic voltammetry, and by computational methods. In the strongly coordinating solvent MeCN, ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– exhibits dynamic processes on the NMR timescale which are consistent with solvent coordination. However, in the weakly coordinating solvent CH 2 Cl 2 , a more static structure is observed suggesting that the dimer retains its structure in solution state. An electrochemical analysis of ([(C 2 F 5 ) 3 Co(μ-F)] 2 2– was performed, and the data are compared to previously reported cobalt(III) perfluoroethyl complexes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

An overview of cobalt-free, nickel-containing cathodes for Li-ion batteries

The need for high-energy, low-cost batteries is projected to grow dramatically in the next decade due to electrification of the transportation market. Such demands are straining Li-ion supply chains for critical materials including lithium, nickel, and cobalt. Price instability, environment toxicity, and limits in the absolute supply lead to great concern for the continued use of cobalt. Similar to cobalt, the required grade of nickel for batteries, known as Class 1 nickel, has also been declining due to geological scarcity and low incentive prices. Herein, this review summarizes alternative cathode chemistries with no cobalt and reduced nickel content for high-energy Li-ion batteries targeting sustainable growth in the electric vehicle market. Further, the primary challenges associated with each material system are generally classified as being related to four common categories: (1) ion instability during charging, (2) poor electronic conductivity, (3) poor ionic conductivity, and (4) poor thermal stability.

25 ENERGY STORAGE↗
DOE OSTI2020

Global Electrification of Vehicles and Intertwined Material Supply Chains of Cobalt, Copper and Nickel

Electric vehicles (EVs) will be an important part of a low-carbon economy. Future EV adoption depends on overcoming multiple barriers, including charging infrastructure, sufficient electricity generation, and the availability of battery raw materials at acceptable costs, including cobalt, copper and nickel – which typically are co-produced. Various EV projections have been made, along with associated requirements for battery raw materials (demand). There have been separate assessments of the availability of raw materials (supply). However, integrated assessments of supply and demand and their interaction over time are lacking to support decision-making. Using a dynamic market model that reflects the co-produced nature of cobalt, copper and nickel production as well as recycling, we estimate global output of these three metals under different EV growth scenarios from 2020 to 2040. In this work, results suggest that starting in 2025, replacement demand for battery raw materials becomes important. Thus, estimates for future material demand that consider only demands from new EVs are incomplete and misleading. EV deployment and associated increased demand for raw materials will have a greater impact on prices for cobalt than nickel and, in turn, for nickel than copper. High EV deployment scenarios will be difficult to achieve without larger supplies of copper, nickel and cobalt than forthcoming under the conditions modeled here, which anticipates a six-year time lag between a demand increase and the expansion of metal-production capacity. Shortening battery lifetimes and improving collection and recycling rates increase secondary supply, but the extent to which these factors support additional EV deployment is mixed.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Visible-Light-Enhanced Cobalt-Catalyzed Hydrogenation: Switchable Catalysis Enabled by Divergence between Thermal and Photochemical Pathways

The catalytic hydrogenation activity of the readily-prepared, coordinatively saturated cobalt(I) precatalyst, (R,R)-( iPr DuPhos)Co(CO) 2 H ((R,R)- iPr DuPhos = (+)-1,2-bis[(2R,5R)-2,5-diisopropylphospholano]benzene) is described. While efficient turnover was observed with a range of alkenes upon heating to 100 ºC, the catalytic performance of the cobalt catalyst was markedly enhanced upon irradiation with blue light at 35 °C. Here, this improved reactivity enabled hydrogenation of terminal, di- and trisubstituted alkenes, alkynes, and carbonyl compounds. A combination of deuterium labeling studies, hydrogenation of alkenes containing radical clocks and experiments probing relative rates support a hydrogen atom transfer pathway under thermal conditions that is enabled by a relatively weak cobalt–hydrogen bond of 56 kcal/mol. In contrast, data for the photocatalytic reactions support light-induced dissociation of a carbonyl ligand followed by a coordination-insertion sequence where the product is released by combination of a cobalt alkyl intermediate with the starting hy-dride, (R,R)-( iPr DuPhos)Co(CO) 2 H. These results demonstrate the versatility with catalysis with Earth-abundant metals as pathways involving open- versus closed-shell intermediates can be switched by the energy source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Understanding the Origin of Negative Temperature Dependence and Activity of N-Coordinated Cobalt Sites During Ethylene Dimerization

The on-demand production of short-chain linear alpha olefins (LAOs; C4-C8) via C2H4 dimerization and oligomerization is industrially attractive, prompting extensive research on designing active, selective, and stable catalysts for industrial use. Cobalt supported on ammoniated carbon (Co(NH3)x/C) catalysts have shown remarkable activity and selectivity in this process. However, critical aspects such as the active phase, active site structure, the role of the catalyst support, cobalt loading effects, and the inverse correlation of the reaction rate with temperature remain inadequately understood. This study systematically explores these factors using a combination of steady-state differential catalytic tests, in situ molecular characterization including diffuse reflectance UV-Vis (DR-UV-Vis), Infrared, and Raman spectroscopies, and ex situ X-ray diffraction (XRD) and high annular aberration-corrected dark field transmission electron microscopy (HAADF-STEM). Various supports (SiO2, Al2O3, NH4-ZSM-5, g-C3N4, and C) and cobalt loadings (1.0-3.0 Co nm-2) were studied to determine the optimal catalyst composition and identify the active phase and sites. Carbon-supported catalysts uniquely produce C4-8 LAOs during C2H4 dimerization, with site-time-yield remaining constant (~10-3 s-1) for 1.0-4.0 Co nm-2 at prolonged reaction times (24-48?h time-on-stream). At higher loadings of 6.0 Co nm-2, the formation of crystalline CoO and Co3O4 phases reduces catalytic activity and LAO selectivity. Our findings show that active catalysts lack crystalline cobalt oxides and instead feature dispersed Co2+ sites, tetra-coordinated to a mix of N/NH3 and O/H2O ligands, which catalyze C2H4 dimerization via the Cossee-Arlman mechanism, exhibiting 1st order dependence on C2H4 concentration. The observed inverse rate-temperature correlation is attributed to compensation effects (i.e., presence of Cremer-Constable relationship) linked to changes in adsorption enthalpic and entropic factors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electronic Structure of Molecular Cobalt Catalysts for H 2 Production Revealed by Multifrequency EPR

Improving the design of hydrogen evolution reaction (HER) catalysts requires a detailed understanding of the catalyst's structure and environment. Here wwe have used multifrequency electron paramagnetic resonance (EPR) spectroscopy (X-band, Q-band, and D-band) in combination with density functional theory (DFT) modeling to elucidate the electronic structure of three Co(II) molecular catalysts for H 2 evolution to determine correlations of electronic structure parameters with catalytic activity and stability. The Co(II) coordination complexes investigated here are representative of two types of H 2 -evolving molecular catalysts: cobaloximes, formed from cobalt coordination to two glyoxime ligands, and cobalt poly(pyridyl) complexes, which commonly have either four or five pyridyl ligands coordinating a single Co(II) ion. These Co(II) complexes were studied in a variety of solvents with a range of polarities and stoichiometric amounts of potential ligands to the cobalt ion to assess the strength and nature of ligand- cobalt interactions. Using magnetic resonance parameters obtained by EPR spectroscopy as reference data, we reconstructed the electronic structure of the Co(II) complexes with the help of DFT modeling. For all three catalysts, we uncovered a linear correlation between the Co(II) A z value and the g x value that is dependent on the strength of the axial ligands. The correlations that we have established between the electronic structure and metal coordination environment provide insight into the structural and electronic factors underpinning the observed trends in HER catalysis activity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Decoupling the catalytic and degradation mechanisms of cobalt active sites during acidic water oxidation

Advancement of iridium-free catalysts for the low-pH oxygen evolution reaction (OER) is required to enable multi-gigawatt-scale proton-exchange water electrolysis. Cobalt-based materials might address this requirement, but little is known about the mechanism of operation of these OER catalysts at low pH. Here we investigate the nature and evolution of the active cobalt sites along with charge- and mass-transfer processes that support their catalytic function within a cobalt–iron–lead oxide material using in situ spectroscopic, gravimetric and electrochemical techniques. We demonstrate that corrosion of the cobalt sites and their reformation through electrooxidation of dissolved Co 2+ do not affect the catalytic mechanism and are decoupled from the OER. The OER-coupled charge transfer is supported by Co (3+δ)+ -oxo-species, which are structurally different from those reported for alkaline/near-neutral conditions and are formed on a relatively slow timescale of minutes. These mechanistic insights might assist in developing genuinely practical catalysts for this vital technology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Impact of Pendant Amine Basicity on Electrochemically-Promoted Cobalt Hydride Formation: Kinetic and Mechanistic Analysis

Here, we report the role of pendant amine basicity on the proton-coupled electron transfer (PCET) reactivity for the conversion of [Co III Cp(P Ph 2 N R 2 )(CH 3 CN)] 2+ complexes to [HCo III Cp(P Ph 2 N R 2 )] + , which is a key transformation involved in catalytic CO 2 conversion to formate and in H 2 evolution. Three complexes were studied, where the amine substituent (R) varies from benzyl, methoxyphenyl, or phenyl. In previous work on the benzyl system, we showed that the amine on the P Ph 2 N Bn 2 ligand serves as a kinetically accessible protonation site and enables three participating hydride formation mechanisms. In this work, a combination of electrochemical measurements and theoretical calculations were used to show that the electronic donation at the pendant amine influences the accessible PCET mechanism and proton transfer kinetics related to cobalt hydride formation under analogous reaction conditions. Notably, the amine with the most electron-donating substituent correlates to the lowest barrier for amine protonation, and specific cobalt hydride formation mechanisms can be shut off for the amine with the least electron-donating substituent. The mechanistic and kinetic changes upon modulation of the amine substituent have great implications for overall catalytic efficiency and selectivity, especially to generate the cobalt hydride intermediate involved in selective CO 2 reduction to formate. This work shows how to exploit kinetic basicity using ligand-cooperative design to facilitate PCET reactions involved in energy related transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗