Analysis of mode locking and ultrashort laser pulses with a nonlinear refractive index.
Longitudinal modes locking and ultrashort light pulse generation in laser cavity resonator with nonlinear refractive index
Laussade, J.-P.↗
SEARCH · Search NASA
Results for “nonlinear resonance”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Optical Sidebands Multiplier
Optical sidebands have been generated with relative frequency tens to hundreds of GHz by using optical sidebands that are generated in a cascade process in high-quality optical resonators with Kerr nonlinearity, such as whispering gallery mode (WGM) resonators. For this purpose, the WGM resonator needs to be optically pumped at two frequencies matching its resonances. These two optical components can be one or several free spectral ranges (FSRs), equal to approximately 12 GHz, in this example, apart from each other, and can be easily derived from a monochromatic pump with an ordinary EOM (electro-optic modulation) operating at half the FSR frequency. With sufficient nonlinearity, an optical cascade process will convert the two pump frequencies into a comb-like structure extending many FSRs around the carrier frequency. This has a demonstratively efficient frequency conversion of this type with only a few milliwatt optical pump power. The concept of using Kerr nonlinearity in a resonator for non-degenerate wave mixing has been discussed before, but it was a common belief that this was a weak process requiring very high peak powers to be observable. It was not thought possible for this approach to compete with electro-optical modulators in CW applications, especially those at lower optical powers. By using the high-Q WGM resonators, the effective Kerr nonlinearity can be made so high that, using even weak seeding bands available from a conventional EOM, one can effectively multiply the optical sidebands, extending them into an otherwise inaccessible frequency range.
Strekalov, Dmitry V.↗
Control of Cavity Resonance Using Oscillatory Blowing
The near-zero net mass oscillatory blowing control of a subsonic cavity flow has been experimentally investigated. An actuator was designed and fabricated to provide both steady and oscillatory blowing over a range of blowing amplitudes and forcing frequencies. The blowing was applied just upstream of the cavity front Wall through interchangeable plate configurations These configurations enabled the effects of hole size, hole shape, and blowing angle to be examined. A significant finding is that in terms of the blowing amplitude, the near zero net mass oscillatory blowing is much more effective than steady blowing; momentum coefficients Lip two orders of magnitude smaller than those required for steady blowing are sufficient to accomplish the same control of cavity resonance. The detailed measurements obtained in the experiment include fluctuating pressure data within the cavity wall, and hot-wire measurements of the cavity shear layer. Spectral and wavelet analysis techniques are applied to understand the dynamics and mechanisms of the cavity flow with control. The oscillatory blowing, is effective in enhancing the mixing in the cavity shear layer and thus modifying the feedback loop associated with the cavity resonance. The nonlinear interactions in the cavity flow are no longer driven by the resonant cavity modes but by the forcing associated with the oscillatory blowing. The oscillatory blowing does not suppress the mode switching behavior of the cavity flow, but the amplitude modulation is reduced.
Scarfe, Alison Lamp↗
On the '3 kiloparsec arm' - Resonance excitation of linear and nonlinear waves by an oval distortion in the central region
The mechanism responsible for the massive rapidly expanding Galactic feature known as the 3-kpc arm (Rougoor and Oort, 1960) is investigated theoretically in the framework of a density-wave model of the Galaxy. The arm is attributed to outgoing waves excited at the outer Lindblad resonance (OLR) of a small rotating oval distortion near the Galactic center. Linear and nonlinear models are developed, and it is shown that a density crest at 3.5 kpc with expansion velocity 53 km/s can be generated by a distortion turning at 118 km/s kpc with a 10-percent perturbation of the main gravitational field at the OLR (located at 3 kpc). The wave character of the nonlinear solution is found to be the same as that of the linear solution and to give good agreement with the observations in terms of expansion velocity, size, shape, and mass; only the observed asymmetry of the arm is not reproduced.
Yuan, C.↗
Nonlinear pitch angle scattering of energetic electrons by coherent VLF waves in the magnetosphere
A study is made of nonlinear cyclotron resonance wave-particle interaction in the magnetosphere with attention to the pitch angle scattering of energetic electrons by coherent VLF whistler mode signals. A computer simulation of the full nonlinear equations of motions for energetic particles interacting with a longitudinal whistler mode wave in an inhomogeneous magnetosphere are used. The results are compared to those of a linear theory. Test electrons distributed in energy and pitch angle are used to simulate the full distribution of particles. The scattering of the test particles and their integration over energy and pitch angle yield the precipitated flux. The results suggest that coherent VLF waves significantly influence the dynamics and lifetimes of energetic electrons trapped in the magnetosphere and magnetic shells illuminated by the waves.
Inan, U. S.↗
Electrostatic instabilities of velocity-space-shell distributions in magnetized plasmas
Electron instabilities of magnetized spherical shell distributions in velocity space with a colder Maxwellian background are investigated analytically with simulations using electrostatic particle codes. The resonant and nonresonant instabilities observed in the particle simulations are in agreement with zeros of the dielectric function, as found from the resonant approximations for waves with an electric field component along the magnetic field or by computation with a root solver code in the case of perpendicular propagation. Saturation of the instabilities is by nonlinear cyclotron resonance with the cold background in the resonant case or by nonstochastic cyclotron harmonic damping by the cold background in the nonresonant case. Instabilities invariably lead to perpendicular acceleration and heating of the cold background to velocities sometimes exceeding the shell velocity.
Sentman, D. D.↗
Resonant decay of global MHD modes at 'thick' interfaces
A global surface mode can exist on a 'surface' which is not a true discontinuity, but without sufficient dissipation it is not a normal mode and it decays in time via resonance absorption. The decay rate can be calculated analytically when the 'surface' is thin. The goal of this paper is to numerically estimate the decay rate when the surface is not thin. A cold plasma in a uniform magnetic field is considered in which density varies linearly across the 'surface'. In this linearized calculation, the global surface mode is driven in steady state by an antenna located in one of the uniform regions external to the surface. The frequency is a free parameter, and resonance curves are computed numerically without approximations. The widths of the resonance curves are used to estimate the free decay times of undriven surface modes, via the uncertainty principle. When applied to the active solar corona, the decay rates are large enough to account for the coronal heating, but it should be kept in mind that the role of nonlinearity in resonance absorption is still undetermined.
Hollweg, Joseph V.↗
Compact Dielectric-Rod White-Light Delay Lines
Optical delay lines of a proposed type would be made from rods of such dielectric materials as calcium fluoride, fused silica, or sapphire. These would offer advantages over prior optical delay lines, as summarized below. Optical delay lines are key components of opto-electronic microwave oscillators, narrow-band opto-electronic microwave filters, evanescent-field optical biochemical detectors, and some Fourier-Transform spectrum analyzers. Heretofore, optical delay lines used in such applications have been of two types: resonators and coiled long optical fibers, both of which have disadvantages: Resonators are compact, but excitation must be provided by narrow-band lasers. Wide-band (including noisy) laser light cannot be coupled efficiently to narrow-band resonators. When light is coupled into a narrowband resonator from a source of reasonably high power, a significant amount of optical energy circulates within the resonator, causing nonlinear loss and significant noise. Typically, a coil-type optical delay line is made of fused-silica fiber, which exhibits fundamental loss. To overcome the limit imposed by the optical loss in fused silica, it would be necessary to use fibers having crystalline cores. Although space is saved by winding fibers into coils, fiber-coil delay lines are still inconveniently bulky. The proposed compact dielectric-rod delay lines would exploit the special class of non-diffracting light beams that are denoted Bessel beams because their amplitudes are proportional to Bessel functions of the radii from their central axes. High-order Bessel beams can have large values of angular momentum. They can be generated with the help of whispering-gallery-mode optical resonators, as described, for example, in "Simplified Generation of High-Angular-Momentum Light Beams" (NPO-42965) NASA Tech Briefs, Vol. 31, No. 3 (March 2007), page 8a. In a delay line according to the proposal, the dielectric rod would be dimensioned to function as a multimode waveguide. Suitably chosen high-angular-momentum modes in such a waveguide exhibit low group velocity (hence, long delay) and no resonance. Such a delay line could perform well at any wavelength or range of wavelengths within the transparency wavelength band of the dielectric material, and the maximum possible group delay achievable through suitable design would be limited only by the optical loss in the rod material.
Maleki, Lute↗
Phase Matching of Diverse Modes in a WGM Resonator
Phase matching of diverse electromagnetic modes (specifically, coexisting optical and microwave modes) in a whispering-gallery-mode (WGM) resonator has been predicted theoretically and verified experimentally. Such phase matching is necessary for storage of microwave/terahertz and optical electromagnetic energy in the same resonator, as needed for exploitation of nonlinear optical phenomena. WGM resonators are used in research on nonlinear optical phenomena at low optical intensities and as a basis for design and fabrication of novel optical devices. Examples of nonlinear optical phenomena recently demonstrated in WGM resonators include low-threshold Raman lasing, optomechanical oscillations, frequency doubling, and hyperparametric oscillations. The present findings regarding phase matching were made in research on low-threshold, strongly nondegenerate parametric oscillations in lithium niobate WGM resonators. The principle of operation of such an oscillator is rooted in two previously observed phenomena: (1) stimulated Raman scattering by polaritons in lithium niobate and (2) phase matching of nonlinear optical processes via geometrical confinement of light. The oscillator is partly similar to terahertz oscillators based on lithium niobate crystals, the key difference being that a novel geometrical configuration of this oscillator supports oscillation in the regime. The high resonance quality factors (Q values) typical of WGM resonators make it possible to achieve oscillation at a threshold signal level much lower than that in a non-WGM-resonator lithium niobate crystal.
Savchenkov, Anatoliy↗
Effect of grazing flow on the nonlinear acoustic behavior of helmholtz resonators
A semi empirical fluid mechanical model is derived of the acoustic behavior of thin walled single orifice Helmholtz resonators in a grazing flow environment. The model assumes that the flow field incident to a resonator orifice consists of a spherical sound particle velocity field superimposed upon a mean grazing flow. The incident and cavity sound fields are connected in terms of an orifice discharge coefficient whose values are determined experimentally using the two microphone method. With regard to its application to rocket motor interiors, the most important finding of this study is that the acoustic impedance of Helmholtz resonators is affected by grazing flow when the product of the amplitude of the sound pressure incident to the resonator orifice and the rocket motor interior mean grazing flow speed are less than 0.5. For values greater than 0.5, the acoustic impedance is independent of the grazing flow.
Hersh, A. S.↗
A simulation study of cold electron heating by loss cone instabilities
Results are presented of a computer simulation study of electron cyclotron harmonic waves; an electrostatic finite size particle simulation code is used. The initial electron velocity distribution function is modeled as a hot ring perpendicular to the ambient magnetic field and a cold Maxwellian component. Nonlinear cyclotron resonance is found to be the saturation mechanism of the unstable waves and the heating mechanism of the cold electrons. The results can be related to certain ionospheric phenomena.
Ashour-Abdalla, M.↗
Transient nonlinear pitch angle scattering of energetic electrons by coherent VLF wave packets in the magnetosphere
Adiabatic theory is used in studying the transient nonlinear pitch angle scattering experienced by energetic electrons under the influence of coherent VLF wave packets in the magnetosphere. Finite wave packets of both fixed and variable frequency are considered, as are wide ranges of L shell, wave amplitude, and wave frequency. The results indicate that large mean pitch angle changes can be induced in the portion of the energetic population that undergoes a nonlinear cyclotron resonance interaction with the wave packet.
Bell, T. F.↗
Simulation of space plasma phenomena
The importance of computer modeling in investigating physical phenomena is discussed, noting that modern computers can follow the time evolution of systems containing many millions of degrees of freedom, all of which are simultaneously interacting with each other. The two types of models used in simulating plasma, that is, particle and fluid, are described. Attention is given to particle models and some recent results obtained concerning the diffuse aurora. The simulations are shown to give clear evidence that a type of nonlinear cyclotron resonance process for the cold particles is responsible for the saturation observed in these calculations. It is also responsible for the cold electron heating and it is found that at saturation the rate of heating of the cold electrons essentially balances the rate at which energy is fed into unstable waves.
Dawson, J. M.↗
Waves and instabilities in a magnetized plasma
Work on computer simulation of waves and instabilities in magnetized plasmas is reviewed. Included are verification of linear theory. Particular emphasis is given to investigation of nonlinear processes involved in the saturation of instabilities and of wave damping; these include a nonlinear cyclotron resonance and particle trapping in intense waves.
Dawson, J. M.↗
Crossflow-vortex instability and transition on a 45 deg swept wing
A crossflow vortex experiment on a 45 deg swept wing is currently being conducted in the Arizona State University Unsteady Wind Tunnel. The experimental apparatus is designed to produce crossflow-dominated transition by simulating infinite swept wing flow using contoured end liners in a closed throat wind tunnel. Stationary fixed-wavelength crossflow vortices are observed at several chord Reynolds numbers. The vortex wavelength which is fixed for a given Reynolds number varies with Reynolds number approximately as predicted by linear stability theory, but with the predicted wavelengths about 30 percent larger than the observed wavelengths. Travelling waves are observed both in the frequency range predicted by linear stability theory and at higher frequencies. These higher frequency waves may be harmonics of the primary crossflow waves generated by a nonlinear parametric resonance phenomena.
Dagenhart, J. Ray↗
Modeling Nonlinear Acoustic Standing Waves in Resonators: Theory and Experiments
The overall goal of the cooperative research with NASA Glenn is to fundamentally understand, computationally model, and experimentally validate non-linear acoustic waves in enclosures with the ultimate goal of developing a non-contact acoustic seal. The longer term goal is to transition the Glenn acoustic seal innovation to a prototype sealing device. Lucas and coworkers are credited with pioneering work in Resonant Macrosonic Synthesis (RMS). Several Patents and publications have successfully illustrated the concept of Resonant Macrosonic Synthesis. To utilize this concept in practical application one needs to have an understanding of the details of the phenomenon and a predictive tool that can examine the waveforms produced within resonators of complex shapes. With appropriately shaped resonators one can produce un-shocked waveforms of high amplitude that would result in very high pressures in certain regions. Our goal is to control the waveforms and exploit the high pressures to produce an acoustic seal. Note that shock formation critically limits peak-to-peak pressure amplitudes and also causes excessive energy dissipation. Proper shaping of the resonator is thus critical to the use of this innovation.
Raman, Ganesh↗
High-Order Tunable Filters Based on a Chain of Coupled Crystalline Whispering Gallery-Mode Resonators
We demonstrate experimentally a tunable third-order optical filter fabricated from the three voltage-controlled lithium niobate whispering gallery-mode resonators. The filter operates at 1550 nm with 30-MHz bandwidth and can be electrooptically tuned by 12 GHz in the linear regime with approximately 80-MHz/V tuning rate. With this filter, we have demonstrated 6-dB fiber-to-fiber insertion loss and 30-ns tuning speed, limited by the resonator buildup time.
optical resonators↗
NASA Tech Briefs, September 2006
Topics covered include: Improving Thermomechanical Properties of SiC/SiC Composites; Aerogel/Particle Composites for Thermoelectric Devices; Patches for Repairing Ceramics and Ceramic- Matrix Composites; Lower-Conductivity Ceramic Materials for Thermal-Barrier Coatings; An Alternative for Emergency Preemption of Traffic Lights; Vehicle Transponder for Preemption of Traffic Lights; Automated Announcements of Approaching Emergency Vehicles; Intersection Monitor for Traffic-Light-Preemption System; Full-Duplex Digital Communication on a Single Laser Beam; Stabilizing Microwave Frequency of a Photonic Oscillator; Microwave Oscillators Based on Nonlinear WGM Resonators; Pointing Reference Scheme for Free-Space Optical Communications Systems; High-Level Performance Modeling of SAR Systems; Spectral Analysis Tool 6.2 for Windows; Multi-Platform Avionics Simulator; Silicon-Based Optical Modulator with Ferroelectric Layer; Multiplexing Transducers Based on Tunnel-Diode Oscillators; Scheduling with Automated Resolution of Conflicts; Symbolic Constraint Maintenance Grid; Discerning Trends in Performance Across Multiple Events; Magnetic Field Solver; Computing for Aiming a Spaceborne Bistatic- Radar Transmitter; 4-Vinyl-1,3-Dioxolane-2-One as an Additive for Li-Ion Cells; Probabilistic Prediction of Lifetimes of Ceramic Parts; STRANAL-PMC Version 2.0; Micromechanics and Piezo Enhancements of HyperSizer; Single-Phase Rare-Earth Oxide/Aluminum Oxide Glasses; Tilt/Tip/Piston Manipulator with Base-Mounted Actuators; Measurement of Model Noise in a Hard-Wall Wind Tunnel; Loci-STREAM Version 0.9; The Synergistic Engineering Environment; Reconfigurable Software for Controlling Formation Flying; More About the Tetrahedral Unstructured Software System; Computing Flows Using Chimera and Unstructured Grids; Avoiding Obstructions in Aiming a High-Gain Antenna; Analyzing Aeroelastic Stability of a Tilt-Rotor Aircraft; Tracking Positions and Attitudes of Mars Rovers; Stochastic Evolutionary Algorithms for Planning Robot Paths; Compressible Flow Toolbox; Rapid Aeroelastic Analysis of Blade Flutter in Turbomachines; General Flow-Solver Code for Turbomachinery Applications; Code for Multiblock CFD and Heat-Transfer Computations; Rotating-Pump Design Code; Covering a Crucible with Metal Containing Channels; Repairing Fractured Bones by Use of Bioabsorbable Composites; Kalman Filter for Calibrating a Telescope Focal Plane; Electronic Absolute Cartesian Autocollimator; Fiber-Optic Gratings for Lidar Measurements of Water Vapor; Simulating Responses of Gravitational-Wave Instrumentation; SOFTC: A Software Correlator for VLBI; Progress in Computational Simulation of Earthquakes; Database of Properties of Meteors; Computing Spacecraft Solar-Cell Damage by Charged Particles; Thermal Model of a Current-Carrying Wire in a Vacuum; Program for Analyzing Flows in a Complex Network; Program Predicts Performance of Optical Parametric Oscillators; Processing TES Level-1B Data; Automated Camera Calibration; Tracking the Martian CO2 Polar Ice Caps in Infrared Images; Processing TES Level-2 Data; SmaggIce Version 1.8; Solving the Swath Segment Selection Problem; The Spatial Standard Observer; Less-Complex Method of Classifying MPSK; Improvement in Recursive Hierarchical Segmentation of Data; Using Heaps in Recursive Hierarchical Segmentation of Data; Tool for Statistical Analysis and Display of Landing Sites; Automated Assignment of Proposals to Reviewers; Array-Pattern-Match Compiler for Opportunistic Data Analysis; Pre-Processor for Compression of Multispectral Image Data; Compressing Image Data While Limiting the Effects of Data Losses; Flight Operations Analysis Tool; Improvement in Visual Target Tracking for a Mobile Robot; Software for Simulating Air Traffic; Automated Vectorization of Decision-Based Algorithms; Grayscale Optical Correlator Workbench; "One-Stop Shopping" for Ocean Remote-Sensing and Model Data; State Analysis Database Tool; Generating CAHV and CAHVOmages with Shadows in ROAMS; Improving UDP/IP Transmission Without Increasing Congestion; FORTRAN Versions of Reformulated HFGMC Codes; Program for Editing Spacecraft Command Sequences; Flight-Tested Prototype of BEAM Software; Mission Scenario Development Workbench; Marsviewer; Tool for Analysis and Reduction of Scientific Data; ASPEN Version 3.0; Secure Display of Space-Exploration Images; Digital Front End for Wide-Band VLBI Science Receiver; Multifunctional Tanks for Spacecraft; Lightweight, Segmented, Mostly Silicon Telescope Mirror; Assistant for Analyzing Tropical-Rain-Mapping Radar Data; and Anion-Intercalating Cathodes for High-Energy- Density Cells.
Source record↗