Search NASA⌕ Search

SEARCH · Search NASA

Results for “numerical mixing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

CFD analysis of jet mixing in low NO(x) flametube combustors

The Rich-burn/Quick-mix/Lean-burn (RQL) combustor has been identified as a potential gas turbine combustor concept to reduce NO(x) emissions in High Speed Civil Transport (HSCT) aircraft. To demonstrate reduced NO(x) levels, cylindrical flametube versions of RQL combustors are being tested at NASA Lewis Research Center. A critical technology needed for the RQL combustor is a method of quickly mixing by-pass combustion air with rich-burn gases. Jet mixing in a cylindrical quick-mix section was numerically analyzed. The quick-mix configuration was five inches in diameter and employed twelve radial-inflow slots. The numerical analyses were performed with an advanced, validated 3D Computational Fluid Dynamics (CFD) code named REFLEQS. Parametric variation of jet-to-mainstream momentum flux ratio (J) and slot aspect ratio was investigated. Both non-reacting and reacting analyses were performed. Results showed mixing and NO(x) emissions to be highly sensitive to J and slot aspect ratio. Lowest NO(x) emissions occurred when the dilution jet penetrated to approximately mid-radius. The viability of using 3D CFD analyses for optimizing jet mixing was demonstrated.

Talpallikar, M. V.↗
NASA NTRS1991

CFD analysis of jet mixing in low NOx flametube combustors

The Rich-burn/Quick-mix/Lean-burn (RQL) combustor was identified as a potential gas turbine combustor concept to reduce NO(x) emissions in High Speed Civil Transport (HSCT) aircraft. To demonstrate reduced NO(x) levels, cylindrical flametube versions of RQL combustors are being tested at NASA Lewis Research Center. A critical technology needed for the RQL combustor is a method of quickly mixing by-pass combustion air with rich-burn gases. Jet mixing in a cylindrical quick-mix section was numerically analyzed. The quick-mix configuration was five inches in diameter and employed twelve radial-inflow slots. The numerical analyses were performed with an advanced, validated 3-D Computational Fluid Dynamics (CFD) code named REFLEQS. Parametric variation of jet-to-mainstream momentum flux ratio (J) and slot aspect ratio was investigated. Both non-reacting and reacting analyses were performed. Results showed mixing and NO(x) emissions to be highly sensitive to J and slot aspect ratio. Lowest NO(x) emissions occurred when the dilution jet penetrated to approximately mid-radius. The viability of using 3-D CFD analyses for optimizing jet mixing was demonstrated.

Talpallikar, M. V.↗
NASA NTRS1992

Coherent structures in a simulated turbulent mixing layer

A direct numerical simulation of a plane turbulent mixing layer has been performed. The simulation was initialized using two turbulent velocity fields obtained from direct numerical simulation of a turbulent boundary layer at momentum thickness Reynolds number 300 (Spalart, 1988). The mixing layer is allowed to evolve long enough for self-similar linear growth to occur, with the visual thickness Reynolds number reaching 14,000. The simulated flow is examined for evidence of the coherent structures expected in a mixing layer (rollers and rib vortices). Before the onset of self-similar growth, such structures are present with properties similar to the corresponding laminar or transitional structures. In the self-similar growth regime, however, only the rollers are present with no indication of rib vortices and no indication of conventional pairing. This results in a reduction of mixing and layer growth.

Moser, Robert D.↗
NASA NTRS1976

Dynamic analysis of a class of mixed lumped-distributed parameter systems via numerical techniques

The modeling via transfer matrices of mixed lumped-distributed parameter systems with feedback control is discussed and novel methods of obtaining information on the controlled system's dynamic response via numerical methods is presented. These methods utilize numerical searches in the complex plane for the roots of the transcendental characteristic equation to determine the closed loop system eigenvalues. The fast Fourier transform (FFT) algorithm is utilized but in the inverse fashion (from frequency domain to time domain). The information obtained is identical to that contained in a model in modal coordinates, and can be used to construct such a model. An interactive computer program to do the required calculation is described, as well as its application to a manipulator arm design problem.

Book, W. J.↗
NASA NTRS1985

Coherent structures in a turbulent mixing layer - A comparison between direct numerical simulations and experiments

An eduction scheme has been developed in an attempt to determine the characteristics of large-scale vortical structures in a turbulent mixing layer. This analysis scheme has been applied to a set of experimental data taken in a new, larger mixing layer facility designed to minimize boundary and resonance effects. A similar scheme has been developed to apply to the results of a direct numerical simulation of a temporally growing mixing layer. A comparison of the two approaches shows important similarities in the coherent structures. The numerical simulations indicate that low levels of coherent forcing can dramatically change the evolution of the mixing layer. In the absence of such forcing, the numerical simulations and experiments show a lack of regularity in the transverse position, spacing, amplitude, shape and spanwise coherence of the large-scale vortical structures.

Metcalfe, R. W.↗
NASA NTRS1994

Direct Simulation of a Self-Similar Turbulent Mixing Layer

Three direct numerical simulations of incompressible turbulent plane mixing layers have been performed. All the simulations were initialized with the same two velocity fields obtained from a direct numerical simulation of a turbulent boundary layer with a momentum thickness Reynolds number of 300 computed by Spalart (J. Fluid Mech. 187, 61, 1988). In addition to a baseline case with no additional disturbances, two simulations were begun with two-dimensional disturbances of varying strength in addition to the boundary layer turbulence. After a development stage, the baseline case and the case with weaker additional two-dimensional disturbances evolve self-similarly, reaching visual thickness Reynolds numbers of up to 20 000. This self-similar period is characterized by a lack of large-scale organized pairings, a lack of streamwise vortices in the 'braid' regions, and scalar mixing that is characterized by 'marching' Probability Density Functions (PDFs). The case begun with strong additional two-dimensional disturbances only becomes approximately self-similar, but exhibits sustained organized large-scale pairings, clearly defined braid regions with streamwise vortices that span them, and scalar PDFs that are 'nonmarching.' It is also characterized by much more intense vertical velocity fluctuations than the other two cases. The statistics and structures in several experiments involving turbulent mixing layers are in better agreement with those of the simulations that do not exhibit organized pairings.

Rogers, Michael M.↗
NASA NTRS1986

Direct numerical simulations of a temporally evolving mixing layer subject to forcing

The vortical evolution of mixing layers subject to various types of forcing is numerically simulated using pseudospectral methods. The effect of harmonic forcing and random noise in the initial conditions is examined with some results compared to experimental data. Spanwise forcing is found to enhance streamwise vorticity in a nonlinear process leading to a slow, secondary growth of the shear layer. The effect of forcing on a chemical reaction is favorably compared with experimental data at low Reynolds numbers. Combining harmonic and subharmonic forcing is shown to both augment and later destroy streamwise vorticity.

Claus, Russell W.↗
NASA NTRS1989

Direct numerical simulations of a temporally evolving mixing layer subject to forcing

The vortical evolution of mixing layers subject to various types of forcing is numerically simulated using pseudospectral methods. The effect of harmonic forcing and random noise in the initial conditions is examined with some results compared to experimental data. Spanwise forcing is found to enhance streamwise vorticity in a nonlinear process leading to a slow, secondary growth of the shear layer. The effect of forcing on a chemical reaction is favorably compared with experimental data at low Reynolds numbers. Combining harmonic and subharmonic forcing is shown to both augment and later destroy streamwise vorticity.

Claus, R. W.↗
NASA NTRS1989

Numerical studies of the effects of jet-induced mixing on liquid-vapor interface condensation

Numerical solutions of jet-induced mixing in a partially full cryogenic tank are presented. An axisymmetric laminar jet is discharged from the central part of the tank bottom toward the liquid-vapor interface. Liquid is withdrawn at the same volume flow rate from the outer part of the tank. The jet is at a temperature lower than the interface, which is maintained at a certain saturation temperature. The interface is assumed to be flat and shear-free and the condensation-induced velocity is assumed to be negligibly small compared with radial interface velocity. Finite-difference method is used to solve the nondimensional form of steady state continuity, momentum, and energy equations. Calculations are conducted for jet Reynolds numbers ranging from 150 to 600 and Prandtl numbers ranging from 0.85 to 2.65. The effects of above stated parameters on the condensation Nusselt and Stanton numbers which characterize the steady-state interface condensation process are investigated. Detailed analysis to gain a better understanding of the fundamentals of fluid mixing and interface condensation is performed.

Lin, Chin-Shun↗
NASA NTRS1989

Numerical studies of the effects of jet-induced mixing on liquid-vapor interface condensation

Numerical solutions of jet-induced mixing in a partially full cryogenic tank are presented. An axisymmetric laminar jet is discharged from the central part of the tank bottom toward the liquid-vapor interface. Liquid is withdrawn at the same volume flow rate from the outer part of the tank. The jet is at a temperature lower than the interface, which is maintained at a certain saturation temperature. The interface is assumed to be flat and shear-free and the condensation-induced velocity is assumed to be negligibly small compared with radial interface velocity. Finite-difference method is used to solve the nondimensional form of steady state continuity, momentum, and energy equations. Calculations are conducted for jet Reynolds numbers ranging from 150 to 600 and Prandtl numbers ranging from 0.85 to 2.65. The effects of above stated parameters on the condensation Nusselt and Stanton numbers which characterize the steady-state interface condensation process are investigated. Detailed analysis to gain a better understanding of the fundamentals of fluid mixing and interface condensation is performed.

Lin, Chin-Shun↗
NASA NTRS1991

Numerical prediction of wakes in cascades and compressor rotors including the effects of mixing. II - Rotor passage flow and wakes including the effects of spanwise mixing

The results of a numerical investigation to predict the flow field including wakes and mixing in axial-flow compressor rotors are presented. The wake behavior in a moderately loaded compressor rotor is studied numerically using a 3D incompressible Navier-Stokes solver with a high Reynolds number form of a turbulence model. The equations are solved using a time dependent implicit technique. The agreement between the measured data and the predictions is good; including the blade boundary-layer profiles, wake mean-velocity profiles, and decay. The ability of the pseudocompressibility scheme to predict the entire flow field including the near and far wake profiles and its decay characteristics, effect of loading, and the viscous losses of a 3D rotor flow field are demonstrated. The mixing in the downstream regions away from the hub and annulus walls is dominated by wake diffusion. In regions away from the walls the radial mixing is predominantly caused by the transport of mass, momentum, and energy by the radial component of velocity in the wake.

Lakshminarayana, B.↗
NASA NTRS2003

Turbulence in Supercritical O2/H2 and C7H16/N2 Mixing Layers

This report presents a study of numerical simulations of mixing layers developing between opposing flows of paired fluids under supercritical conditions, the purpose of the study being to elucidate chemical-species-specific aspects of turbulence. The simulations were performed for two different fluid pairs O2/H2 and C7H16/N2 at similar reduced initial pressures (reduced pressure is defined as pressure divided by critical pressure). Thermodynamically, O2/H2 behaves more nearly like an ideal mixture and has greater solubility, relative to C7H16/N2, which departs strongly from ideality. Because of a specified smaller initial density stratification, the C7H16/N2 layers exhibited greater levels of growth, global molecular mixing, and turbulence. However, smaller density gradients at the transitional state for the O2/H2 system were interpreted as indicating that locally, this system exhibits enhanced mixing as a consequence of its greater solubility and closer approach to ideality. These thermodynamic features were shown to affect entropy dissipation, which was found to be larger for O2/H2 and concentrated in high-density-gradient-magnitude regions that are distortions of the initial density-stratification boundary. In C7H16/N2, the regions of largest dissipation were found to lie in high-density-gradient-magnitude regions that result from mixing of the two fluids.

Bellan, Josette↗
NASA NTRS1992

Aeroloads and secondary flows in a transonic mixed flow turbine stage

A numerical simulation of a transonic mixed flow turbine stage has been carried out using an average passage Navier-Stokes analysis. The mixed flow turbine stage considered here consists of a transonic nozzle vane and a highly loaded rotor. The simulation was run at the design pressure ratio and is assessed by comparing results with those of an established throughflow design system. The three-dimensional aerodynamic loads are studied as well as the development and migration of secondary flows and their contribution to the total pressure loss. The numerical results indicate that strong passage vortices develop in the nozzle vane, mix out quickly, and have little impact on the rotor flow. The rotor is highly loaded near the leading edge. Within the rotor passage, strong spanwise flows and other secondary flows exist along with the tip leakage vortex. The rotor exit loss distribution is similar in character to that found in radial inflow turbines. The secondary flows and non-uniform work extraction also tend to significantly redistribute a non-uniform inlet total temperature profile by the exit of the stage.

Kirtley, K. R.↗
NASA NTRS1992

Numerical simulation of topographically forced mesoscale variability in a well-mixed marine layer

A simple nonlinear numerical model of a well-mixed marine layer is employed to examine topographically forced mesoscale variability off coastal California. This model is utilized to simulate a persistent wind maximum observed near Point Conception during northwesterly winds. The model solves for the two horizontal components of the marine-layer height and the marine-layer wind.

Eddington, Lee W.↗
NASA NTRS1976

Algorithms for computing the geopotential using a simple density layer

Several algorithms have been developed for computing the potential and attraction of a simple density layer. These are numerical cubature, Taylor series, and a mixed analytic and numerical integration using a singularity-matching technique. A computer program has been written to combine these techniques for computing the disturbing acceleration on an artificial earth satellite. A total of 1640 equal-area, constant surface density blocks on an oblate spheroid are used. The singularity-matching algorithm is used in the subsatellite region, Taylor series in the surrounding zone, and numerical cubature on the rest of the earth.

Morrison, F.↗
NASA NTRS1987

A numerical model for supersonic reacting mixing layers

A current research effort is underway at the NASA Langley Research Center to achieve a detailed understanding of important phenomena present when a supersonic flow undergoes a chemical reaction. A computer program has been developed to study the details of such flows. The program has been constructed to consider the multicomponent diffusion and convection of important species, the finite-rate reaction of these species, and the resulting interaction between the fluid mechanics and chemistry. Code results from the analysis of a spatially developing and reacting mixing layer are presented, and conclusions are drawn regarding the structure of the evolving layer and its associated flame.

Drummond, J. Philip↗
NASA NTRS1991

Stellar turbulent convection - A new model and applications

Improvements of the mixing-length theory (MLT) of turbulent convection in stellar atmospheres are developed theoretically. It is pointed out that inaccuracies are introduced into MLT by the approximating assumptions of a single large eddy (rather than many eddies of different sizes) and of incompressibility. In the proposed new model, the full spectrum of turbulent eddies is determined using more recent turbulence models (e.g., the eddy-damped quasi-normal Markovian model of Orszag, 1977), and a new formula for the convective flux is obtained which gives values up to 10 times greater than those of the MLT at high convective efficiencies. The problem of compressibility is addressed by adding one of two new expressions (one with no free parameters) for the mixing length. Numerical results from simulations of a solar-type star and a 0.8-solar-mass globular-cluster star are presented in tables and graphs and discussed in detail; the agreement with observations is found to be better than with the MLT.

Canuto, V. M.↗