Search NASA⌕ Search

SEARCH · Search NASA

Results for “obtaining transport coefficients”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Foundations of magnetohydrodynamics

In this tutorial, a derivation of magnetohydrodynamics (MHD) valid beyond the usual ideal gas approximation is presented. Non-equilibrium thermodynamics is used to obtain conservation equations and linear constitutive relations. When coupled with Maxwell's equations, this provides closed fluid equations in terms of material properties of the plasma, described by the equation of state and transport coefficients. These properties are connected to microscopic dynamics using the Irving–Kirkwood procedure and Green–Kubo relations. Symmetry arguments and the Onsager–Casimir relations allow one to vastly simplify the number of independent coefficients. Importantly, expressions for current density, heat flux, and stress (conventionally Ohm's law, Fourier's law, and Newton's law) take different forms in systems with a non-ideal equation of state. The traditional form of the MHD equations, which is usually obtained from a Chapman–Enskog solution of the Boltzmann equation, corresponds to the ideal gas limit of the general equations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Goldsim Modeling of Vadose Zone Transport for E-Area Naval Reactor Component Disposal Areas: Model Description and Benchmarking

This report documents the development of a GoldSim® model of flow and radionuclide transport to the water table through the Naval Reactor Components Disposal Area (NRCDA) waste disposal sites and underlying vadose zones. The model is designed to be used for Monte Carlo uncertainty analysis in support of the E-Area Performance Assessment (PA). This report describes the model and shows results obtained from benchmarking the model to best-estimate deterministic results obtained using a PORFLOW model of NRCDA vadose zone transport. The PORFLOW model is three-dimensional while the GoldSim model is a simplified one-dimensional treatment. Nevertheless, the GoldSim model was able to accurately reproduce PORFLOW results with some adjustment to the nominal dispersion coefficient and vadose zone flow area used as “tuning” parameters. An example of the results obtained comparing GoldSim and PORFLOW calculation of releases of I-129, Tc-99, C-14 and Ni-59 from waste disposal containers at the 643-26E site is shown in Figure 1 below. For all of the test cases evaluated, GoldSim predicted peak concentrations within 6% of the PORFLOW values and peak times agreed within 8% with the majority of the results in better agreement. The close agreement between the two models provides confidence that GoldSim will give results accurately reflecting the behavior of releases from the NRCDA under off-normal operating conditions for sensitivity and uncertainty analysis

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1974

The diffusive idealization of charged particle transport in random magnetic fields

The transport of charged particles diffusing in a random magnetic field parallel to a relatively large guiding field is presented. The same coefficient of diffusion is obtained by three methods. Two corrections must be added to the expression in which the diffusive flux is proportional to the gradient of the density. Explicit expressions are given for a characteristic time and a characteristic length which describe the corrections. The well known divergence of the coefficient of diffusion, which is implied by the quasilinear analysis of pitch angle scattering, does not occur if the scattering rate is finite at 90 deg pitch angle. This effect is illustrated by formulas which give the coefficient of diffusion when the quasilinear expression is perturbed by a variable amount of isotropic scattering.

Earl, J. A.↗
DOE OSTI2023

Measurements of He-Ar, He-N 2 , and He-air thermal creep slip and accommodation coefficients at high temperatures

Understanding gas flows in capillaries has many applications in modeling the transport of gases in nano-structured, porous, or fractured media. A network of capillaries can often approximate these media, and also information on gas-surface interactions obtained from capillary experiments can be used for modeling flows in these media. Experimental data on flows of different mixtures of He-Ar, He-N 2 , and He-air in the slip regime and in stainless steel capillaries at high temperatures were obtained by using a two-bulb apparatus. An accurate expression for the thermal creep slip coefficients with the Lennard-Jones potential parameters and diffuse-specular reflection gas-surface interaction conditions were then used to obtain the accommodation coefficients for the different gases. The experimental data are best described with values of accommodation coefficients in the range of 0.1–0.3 for He and 0.5–1.0 for Ar, N 2 , and air. Further, the use of values in this range is suggested for modeling gaseous flows in capillaries and nano-structured, porous, or fractured media if other direct measured values for a particular medium are unavailable.

42 ENGINEERING↗
DOE OSTI2021

Estimating the color lifetime of energetic quarks

Using a simple geometric framework with a realistic nuclear density distribution, we fit published HERMES data to determine fundamental properties of hadronization using the nuclear medium as a spatial analyzer. Our approach uses a fit to the transverse momentum broadening observable and the hadronic multiplicity ratio; the simultaneous fit to two different observables strongly constrains the outcome. Using the known sizes of the target nuclei, we extract the color lifetime, finding a z h -dependent range of values from 2 to 8 fm/c for these data. We also extract estimates for the qˆ transport coefficient characterizing the strength of the interaction between the quark and the cold nuclear medium, finding an average value of 0.035±0.011 GeV 2 /fm. With a three-parameter model we obtain satisfactory fits to the data with a goodness-of-fit parameter χ 2 /dof of 1.1 or less. In a secondary fit of the results from that model we independently find a value for the Lund String Model string tension of 1.00±0.05 GeV/fm. We evaluated the sensitivity for extracting quark energy loss and effective in-medium hadronic cross sections using four-parameter variants of the model, finding large uncertainties in both cases. Our results suggest that hadronic interaction of forming hadrons in the nuclear medium is the primary dynamical cause of meson attenuation in the HERMES data, with quark energy loss playing a more minor role.

Electron-ion collider↗
DOE OSTI2025

Determining hexavalent chromium transport properties in alkaline nuclear waste using nuclear magnetic resonance spectroscopy

This study focuses on the transport properties of hexavalent chromium, specifically the chromate anion, to improve predictive models and environmental remediation strategies for Cr(VI) migration. Using 53 Cr Nuclear Magnetic Resonance (NMR) spectroscopy, the research quantifies chromate in multicomponent electrolytes replicating nuclear waste conditions at the Hanford Site in Washington State. The consistency of the 53 Cr NMR signal integral with chromate concentration, despite varying matrix compositions, establishes it as a reliable concentration indicator. The transport properties of chromate in an alkaline solution were assessed using relaxation-based measurements via saturation recovery and Carr-Purcell-Meiboom-Gill experiments, determining spin-lattice and spin-spin relaxation times. These measurements, combined with the Bloembergen-Purcell-Pound equation, helped estimate the rotational correlation time and the 53 Cr self-diffusion coefficient using Stokes-Einstein-Debye and Stokes-Einstein equations. Direct measurements were obtained through pulsed field gradient stimulated echo 53 Cr NMR spectroscopy. Monte Carlo simulations further estimated uncertainty propagation. The results enhance comprehension of chromate transport and highlight prospects for identifying transport properties of NMR-active nuclei, traditionally considered unreachable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1986

Teleparallelism as a universal connection on null hypersurfaces in general relativity

It is shown that a close relationship between the inner geometry of a null hypersurface N3 and the Newman-Penrose (NP) (1962, 1963) spin coefficient formalism exists. Projecting the null complex NP tetrad onto N3, two triads of basis vectors in N3 are obtained. The inner geometry of N3 is based on the assumption that these vectors are parallelly transported along the surface; this gives rise to the teleparallel connection as a metric nonsymmetric affine connection. The gauge freedom for the choice of the basis triads is given by the isotropy subgroup of the local Lorentz group leaving invariant the direction of the null generators of N3, and teleparallelism is determined by the equivalence class of the basis triads with respect to the global gauge group. Nine of the twelve NP coefficients are identified as the triad components of the torsion and the second fundamental form of N3. The resulting generalized Gauss-Codazzi equations are identical to nine of the NP equations, i.e., to the half of the Ricci identities. This result gives a geometrical meaning to the entire formalism. Finally a general proof of Penrose's theorem that the shear of the null generators of N3 is the only initial null datum for a gravitational field on N3 is presented.

Mazur, P. O.↗
DOE OSTI2022

Complete characterization of a lithium battery electrolyte using a combination of electrophoretic NMR and electrochemical methods

Improving transport properties of electrolytes is important for developing lithium-ion batteries for future energy storage applications. In Newman's concentrated solution theory, electrolytes are characterized by three transport parameters, conductivity, diffusion coefficient, and transference number, in addition to the thermodynamic factor. In this work, these parameters are all determined for an exemplar liquid electrolyte, lithium bis(trifluoromethanesulfonyl)imide mixed in tetraethylene glycol dimethyl ether, using electrochemical methods. The intrinsic coupling between parameters obtained by electrochemical methods results in large error bars in the transference number that obscure the transport behavior of the electrolyte. Here, we use electrophoretic NMR (eNMR) to measure the electric-field-induced ion and solvent velocities to obtain the transference number directly, which enables determination of the thermodynamic factor with greater certainty. In conclusion, our work indicates that the combination of eNMR and electrochemical methods provides a robust approach for complete characterization of battery electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2022

Novel Relaxation Time Approximation: A Consistent Calculation of Transport Coefficients with QCD-inspired Relaxation Times

We use a novel formulation of the relaxation time approximation to consistently calculate the bulk and shear viscosity coefficients using QCDinspired energy-dependent relaxation times and phenomenological thermal masses obtained from fits to lattice QCD thermodynamics. The matching conditions are conveniently chosen to simplify the computations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Analysis of the High-Pressure High-Temperature (HPHT) growth of single crystal diamond

A multi-scale, computational model is developed to describe the growth characteristics of single-crystal diamond in the High-Pressure, High-Temperature (HPHT) process. This model is the first to connect phase-change kinetics governing crystal growth to the continuum transport of carbon through the growth cell. Results show the importance of convective transport driven by buoyant flow in the metallic solvent, which increases the growth rate by nearly an order of magnitude over that obtained under diffusion alone. Parametric studies show how crystal growth may be kinetically-limited or transport-limited, depending on the value of the macroscopic kinetic coefficient. Estimating this kinetic coefficient from growth experiments yields a phase-change Damköhler number of unity, indicating a mixed regime where phase-change kinetics and transport are comparable and strongly coupled in this system. Mechanisms responsible for slowing growth as the crystal size increases are explained. Finally, supersaturation inhomogeneities along the facets of larger crystals are predicted, which may be relevant to solvent inclusion formation during growth.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Carbon Capture through Membranes - Leveraging Multiphysics Modeling, Dimensional Analysis and Machine Learning to Scale up and Optimize Devices and Processes for Decarbonization

We study the separation performance using membrane modules through dimensional analysis (DA). We formulate the main process equations to identify relevant dimensionless numbers inherent in the physics. In particular, we identify that the critical step in the separation process is mass transfer through the selective layer. Remarkably, the dimensionless feed flow (DFfeed) emerges as a crucial factor in describing this process. Not only does DFfeed directly appear in the governing equations, but it also holds a physical significance associated with the time scales for the mass transfer across the feed side and through the selective layer. Regarding the output performance variables, we consider the recovery, stage cut, productivity and purity. In this context, we profit from experimental data and CFD simulations to evaluate the separation performance of the modules when varying the input flowrate, the scale of the module, and the CO2 permeance. These datasets enable us to establish correlations between performance metrics and the dimensionless feed flow (DFfeed). Using simple power functions of DFfeed, we obtain R2 coefficients exceeding 0.99, indicating the accuracy of the correlations built in the present work. In the future, we wish to use DA to understand key transport mechanisms, predict and control module performance, and challenge the universality of these findings by testing various gas separations across different membrane modules beyond our case study.

Pedrozo, Hector A.↗
DOE OSTI2024

Modeling and Scaling up of Membrane Modules Leveraging Dimensional Analysis

In the current analysis, we study the separation performance using membrane modules through dimensional analysis (DA). We formulate the main process equations to identify relevant dimensionless numbers inherent in the physics. In particular, we identify that the critical step in the separation process is mass transfer through the selective layer. Remarkably, the dimensionless feed flow (DFfeed) emerges as a crucial factor in describing this process. Not only does DFfeed directly appear in the governing equations, but it also holds a physical significance associated with the time scales for the mass transfer across the feed side and through the selective layer. Regarding the output performance variables, we consider the recovery, stage cut, productivity and purity. In this context, we profit from experimental data and CFD simulations to evaluate the separation performance of the modules when varying the input flowrate, the scale of the module, and the CO2 permeance. These datasets enable us to establish correlations between performance metrics and the dimensionless feed flow. Using simple power functions of DFfeed, we obtain R2 coefficients exceeding 0.99, indicating the accuracy of the correlations built in the present work. In the future, we wish to use DA to understand key transport mechanisms, predict and control module performance, and challenge the universality of these findings by testing various gas separations across different membrane modules beyond our case study.

Pedrozo, Hector A.↗
NASA NTRS1983

Day and night models of the Venus thermosphere

A model atmosphere of Venus for altitudes between 100 and 178 km is presented for the dayside and nightside. Densities of CO2, CO, O, N2, He, and O2 on the dayside, for 0800 and 1600 hours local time, are obtained by simultaneous solution of continuity equations. These equations couple ionospheric and neutral chemistry and the transport processes of molecular and eddy diffusion. Photodissociation and photoionization J coefficients are presented to facilitate the incorporation of chemistry into circulation models of the Venus atmosphere. Midnight densities of CO2 CO, O, N2, He, and N are derived from integration of the continuity equations, subject to specified fluxes. The nightside densities and fluxes are consistent with the observed airglow of NO and O2(1 Delta). The homopause of Venus is located near 133 km on both the dayside and nightside.

Massie, S. T.↗
NASA NTRS1988

High-aspect-ratio wings

High-aspect-ratio aircraft include most transport aircraft such as commercial and military transports, business aircraft, and cargo aircraft. Generally, these types of aircraft are designed to cruise over a narrow range of lift coefficients and Mach numbers in the performance of their mission. Emphasis is therefore placed on the cruise performance of transport aircraft and every effort is made to obtain accurate wind-tunnel data to use as a basis for prediction of full-scale cruise performance. However, off-cruise performance is also important and methods were developed for extrapolating wind-tunnel data on buffet and flutter at transonic speed. Transport-type aircraft were tested extensively in various wind tunnels around the world and many different test techniques were developed to simulate higher Reynolds numbers. Methods developed for one tunnel may not be applicable to another tunnel because of differences in size, Reynolds number capability, running time, and test objectives. Many of the methods of boundary-layer control developed in two-dimensional airfoil testing can be applied in tests of transport configurations, but sometimes the three-dimensional flow fields that develop on tranpsort aircraft can make application of the two-dimensional methods difficult or impossible. The discussion is intended to be a representative, but not exhaustive, survey of the various methods of high Reynolds number simulation in the testing of high-aspect-ratio aircraft.

Peterson, John B., Jr.↗
DOE OSTI2020

Time reversal symmetry breaking and odd viscosity in active fluids: Green–Kubo and NEMD results

Active fluids, which are driven at the microscale by non-conservative forces, are known to exhibit novel transport phenomena due to the breaking of time reversal symmetry. Recently, Epstein and Mandadapu [arXiv:1907.10041 (2019)] obtained Green-Kubo relations for the full set of viscous coefficients governing isotropic chiral active fluids, including the so-called odd viscosity, invoking Onsager's regression hypothesis for the decay of fluctuations in active non-equilibrium steady states. In this Communication, we test these Green-Kubo relations using molecular dynamics simulations of a canonical model system consisting of actively torqued dumbbells. We find the resulting odd and shear viscosity values from the Green-Kubo relations to be in good agreement with values measured independently through non-equilibrium molecular dynamics flow simulations. This provides a test of the Green-Kubo relations and lends support to the application of the Onsager regression hypothesis in relation to viscous behaviors of active matter systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1983

Longitudinal aerodynamic characteristics of a wing-winglet model designed at M = 0.8, C sub L = 0.4 using linear aerodynamic theory

Wind tunnel test results have been presented herein for a subsonic transport type wing fitted with winglets. Wind planform was chosen to be representative of wings used on current jet transport aircraft, while wing and winglet camber surfaces were designed using two different linear aerodynamic design methods. The purpose of the wind tunnel investigation was to determine the effectiveness of these linear aerodynamic design computer codes in designing a non-planar transport configuration which would cruise efficiently. The design lift coefficient was chosen to be 0.4, at a design Mach number of 0.8. Force and limited pressure data were obtained for the basic wing, and for the wing fitted with the two different winglet designs, at Mach numbers of 0.60, 0.70, 0.75 and 0.80 over an angle of attack range of -2 to +6 degrees, at zero sideslip. The data have been presented without analysis to expedite publication.

Kuhlman, J. M.↗
NASA NTRS2017

Tortuosity Computations of Porous Materials using the Direct Simulation Monte Carlo

Low-density carbon fiber preforms, used as thermal protection systems (TPS) materials for planetary entry systems, have permeable, highly porous microstructures consisting of interlaced fibers. Internal gas transport in TPS is important in modeling the penetration of hot boundary-layer gases and the in-depth transport of pyrolysis and ablation products. The gas effective diffusion coefficient of a porous material must be known before the gas transport can be modeled in material response solvers; however, there are very little available data for rigid fibrous insulators used in heritage TPS.The tortuosity factor, which reflects the efficiency of the percolation paths, can be computed from the effective diffusion coefficient of a gas inside a porous material and is based on the micro-structure of the material. It is well known, that the tortuosity factor is a strong function of the Knudsen number. Due to the small characteristic scales of porous media used in TPS applications (typical pore size of the order of 50 micron), the transport of gases can occur in the rarefied and transitional regimes, at Knudsen numbers above 1. A proper way to model the gas dynamics at these conditions consists in solving the Boltzmann equation using particle-based methods that account for movement and collisions of atoms and molecules.In this work we adopt, for the first time, the Direct Simulation Monte Carlo (DSMC) method to compute the tortuosity factor of fibrous media in the rarefied regime. To enable realistic simulations of the actual transport of gases in the porous medium, digitized computational grids are obtained from X-ray micro-tomography imaging of real TPS materials. The SPARTA DSMC solver is used for simulations. Effective diffusion coefficients and tortuosity factors are obtained by computing the mean-square displacement of diffusing particles.We first apply the method to compute the tortuosity factors as a function of the Knudsen number for computationally designed materials such as random cylindrical fibers and packed bed of spheres with prescribed porosity. Results are compared to literature values obtained using random walk methods in the rarefied and transitional regime and a finite-volume method for the continuum regime. We then compute tortuosity factors for a real carbon fiber material with a transverse isotropic structure (FiberForm), quantifying differences between through-thickness and in-plain tortuosities at various Knudsen regimes.

Tortuosity↗
NASA NTRS1989

Dynamics of the middle atmosphere in winter (Dynamics). Interrelation between the different variations of turbulent diffusion and ionospheric absorption originating in the middle atmosphere

The turbulent diffusion coefficient was computed from the parameters of sporadic E layers using the wind shear theory of midlatitude sporadic E and models of the ionosphere as well as that of the neutral upper atmosphere. The turbulent diffusion coefficient obtained for the period of circulation disturbances associated with stratospheric warmings and for the intervals of the winter anomaly indicate changes similar to the ionospheric absorption of radio waves, in the former case decreased, in the latter case increased values. This may hit at the role of turbulent transport in the formation of these anomalies. On the basis of these findings, a seasonal variation of the turbulent diffusion coefficient having a minimum in summer and an increase of this parameter with increasing geomagnetic activity are anticipated.

Bencze, P.↗