Search NASA⌕ Search

SEARCH · Search NASA

Results for “optical profiler”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Ocean Observations with EOS/MODIS: Algorithm Development and Post Launch Studies

Significant accomplishments made during the present reporting period include: 1) Installed spectral optimization algorithm in the SeaDas image processing environment and successfully processed SeaWiFS imagery. The results were superior to the standard SeaWiFS algorithm (the MODIS prototype) in a turbid atmosphere off the US East Coast, but similar in a clear (typical) oceanic atmosphere; 2) Inverted ACE-2 LIDAR measurements coupled with sun photometer-derived aerosol optical thickness to obtain the vertical profile of aerosol optical thickness. The profile was validated with simultaneous aircraft measurements; and 3) Obtained LIDAR and CIMEL measurements of typical maritime and mineral dust-dominated marine atmosphere in the U.S. Virgin Islands. Contemporaneous SeaWiFS imagery were also acquired.

Gordon, Howard R.↗
NASA NTRS1995

Saturn's central flash from the 3 July 1989 occultation of 28 Sgr

We present observations of Saturn's central flash obtained from Palomar and McDonald Observatories during the 3 July 1989 occultation of 28 Sgr. As the star passed close to the geometric center of Saturn's shadow, the focusing of the incident starlight by the planet's atmosphere formed multiple stellar images along the limb which were detected in infrared images obtained at wavelengths of 3.9 (Palomar) and 2.1 microns (McDonald). These are the first reported observations of a central flash due to Saturn, and the first of any planet in which the signal flash from each stellar image could be determined separately, permitting a comparison of both intensity and position for each image with model predictions. Four separate flashes were observed from each observatory, corresponding to points on the limb where the starlight passed through the Cassini Division and the relatively transparent C Ring, with maximum brightness reaching 1-2% of the unocculted stellar intensity. The timing of the flashes is quite sensitive to the shape of Saturn's limb, which depends in turn on the planet's zonal gravity harmonics and on the zonal wind profile in the lower stratosphere, near the 2.5-mbar pressure level. The locations of the images along the limb, as well as the timing, shapes, and amplitudes of the individual flash light curves, are well matched by a smoothed model based on a tropospheric zonal wind profile obtained from tracking cloud features in Voyager images and the Saturn ring optical depth profile obtained from the Voyager Photopolarimeter experiment. The smoothing required to give the best match to the data exceeds that attributable to the finite angular extent of the occulted star and may be due to refractive scattering by turbulence or wave structure in Saturn's atmosphere. There is no evidence of significant atmospheric absorption at the observed wavelengths, which correspond to spectral regions of weak methane absorption.

Nicholson, Philip D.↗
NASA NTRS1983

Theoretical quasar emission-line profiles. I - Curve-of-growth effects on observed profiles

Radiative transfer effects are examined in an investigation of the kinematics of quasar and Seyfert emission-line regions with pancake cloud geometries. Consideration is given only to the effects of limb brightening with the aspect angle of pancake clouds, assuming that all lines lie on a single portion of the curve of growth. This effect is coupled with several simple but plausible ensemble geometries and dynamics, and a number of theoretical emission-line profiles have been generated. It is shown that these profiles differ substantially depending on both the ensemble geometry and the portion of the curve of growth considered; for a given ensemble geometry, optically thick line profiles are different from optically thick profiles. It is shown that, for radiatively driven clouds, ensembles of clouds which have maximum velocities approaching the terminal velocity of the acceleration mechanism never produce acceptable profiles unless the cloud luminosity is a strongly decreasing function of radius.

Hubbard, E. N.↗
NASA NTRS2015

The Development of a Deflectometer for Accurate Surface Figure Metrology

Marshall Space Flight Center is developing the method of direct fabrication for high resolution full-shell x-ray optics. In this technique the x-ray optics axial profiles are figured and polished using a computer-controlled ZeekoIRP600X polishing machine. Based on the Chandra optics fabrication history about one third of the manufacturing time is spent on moving a mirror between fabrication and metrology sites, reinstallation and alignment with either the metrology or fabrication instruments. Also, the accuracy of the alignment significantly affects the ultimate accuracy of the resulting mirrors. In order to achieve higher convergence rate it is highly desirable to have a metrology technique capable of in situ surface figure measurements of the optics under fabrication, so the overall fabrication costs would be greatly reduced while removing the surface errors due to the re-alignment necessary after each metrology cycle during the fabrication. The goal of this feasibility study is to demonstrate if the Phase Measuring Deflectometry can be applied for in situ metrology of full shell x-ray optics. Examples of the full-shell mirror substrates suitable for the direct fabrication

X-ray optics metrology↗
NASA NTRS1992

Image Tiling for Profiling Large Objects

Three dimensional surface measurements of large objects arc required in a variety of industrial processes. The nature of these measurements is changing as optical instruments arc beginning to replace conventional contact probes scanned over the objects. A common characteristic of the optical surface profilers is the trade off between measurement accuracy and field of view. In order to measure a large object with high accuracy, multiple views arc required. An accurate transformation between the different views is needed to bring about their registration. In this paper, we demonstrate how the transformation parameters can be obtained precisely by choosing control points which lie in the overlapping regions of the images. A good starting point for the transformation parameters is obtained by having a knowledge of the scanner position. The selection of the control points arc independent of the object geometry. By successively recording multiple views and obtaining transformation with respect to a single coordinate system, a complete physical model of an object can be obtained. Since all data arc in the same coordinate system, it can thus be used for building automatic models for free form surfaces.

Venkataraman, Ajit↗
NASA NTRS1988

An unusual broad line profile in the QSO + 144 - Evidence for an optical jet?

Narrow components in the profiles of the broad Balmer and Mg II emission lines were observed in the QSO 0054 + 144 (PHL 909). The redshift given by the narrow permitted lines is smaller than that of the narrow forbidden O III lines, by an amount corresponding to a velocity difference of about 1000 km/s. There was a possible change in both the broad and narrow permitted lines between 1980 and 1986. It is suggested that the narrow Balmer component may have been produced in a short-lived jetlike structure moving outward from the center of the QSO with this relative line-of-sight velocity.

Zheng, Wei↗
NASA NTRS1989

Voyager radio occultation by Uranus' rings. I - Observational results

The January 24, 1986 radio occultation of Voyager 2 by the Uranian rings yielded fine-resolution, 50- and 200-m optical depth profiles at a 3.6 cm wavelength for the nine pre-Voyager rings; these are found to be opaque, reaching optical depths as great as 6-8 in rings gamma and epsilon, which are the only two rings possessing extremely sharp inner and outer edges. Rings 6, 5, 4, and delta share a morphology characterized by a sharp outer-edge transition and a quasi-exponential inner edge one. In ring eta, this behavior is reversed, and ring beta exhibits both diffuse edges and the smallest of the observed opacities.

Gresh, Donna L.↗
NASA NTRS1990

High spatial resolution mapping of the Cepheus A region at 20, 50, and 100 microns

The Cepheus A region at 20 microns has been mapped, and a bright, unresolved central source with a peak flux of 41 Jy into a 4.0 arcsec x 4.3 arcsec beam has been detected. One-dimensional slit scans have been obtained in two perpendicular directions across Cepheus A at 50 and 100 microns using a high spatial-resolution sampling technique. The temperature and optical depth profile of the far-IR emission are determined, and a peak temperature of 46 K and peak 100 micron optical depth of 0.4 are derived. Maximum entropy deconvolution of the far-IR scans indicate that there is a bright central core with clumpy extended emission. Within errors the position of the 50/100 micron peak is the same as the 20-micron source; this is interpreted as indicating that the 20 micron radiation represents the short-wavelength emission from the core of the dust cloud seen in the far-IR. It is concluded that an embedded source provides the major source of luminosity in the Cepheus A region.

Ellis, H. B., Jr.↗
NASA NTRS1987

The 1 May 1982 stellar occultation by Uranus and the rings Observations from Mount Stromlo Observatory

The Klemola et al. (1981) object KME 15 has been observed by the Mount Stromlo 1.9-m telescope during its occultation by the Uranian rings on May 1, 1982. In addition to deriving accurate midtimes for rings 6, 5, 4, alpha, beta, eta, gamma, delta, and epsilon, on the basis of model fits to the immersion and emersion ring profiles, normal optical depths and equivalent widths are obtained for all save ring 6. The numerical inversion of immersion and emersion atmosphere occultation values has yielded vertical temperature profiles that exhibit mean temperatures in the vicinity of 130 K and a local maximum near the 8-microbar pressure level.

French, Richard G.↗
NASA NTRS1987

Middle atmosphere trace constituents; Proceedings of Workshop 9 of the Twenty-sixth COSPAR Plenary Meeting, Toulouse, France, June 30-July 11, 1986

Papers are presented on a reference model for stratospheric NO2, a proposed reference model for nitric acid, proposed reference models for ozone, and a background stratospheric aerosol reference model. Other topics include a comparison between the observed and calculated distributions of trace species in the middle atmosphere, recent measurements of trace constituents from rocket and balloon probes, NO2 field observations in the stratosphere during the MAP/GLOBUS Campaign in 1983 and 1985, and the vertical distribution of ozone in the equatorial zone. Also considered are precision measurements of stratospheric ozone profiles by rocket-borne optical ozonesondes, vertical profiles of source gases at tropical latitudes, and measurements of stratospheric trace constituent distributions from balloon-borne far infrared observations.

Keating, G. M.↗
NASA NTRS1984

Consequences of a chromospheric temperature gradient on the width of H Alpha in late-type giants

An analytic expression for the integrated H alpha optical depth profile is derived for a one dimensional slab geometry model chromosphere, with electron temperature increasing as a power law with height. The formula predicts H alpha opacity and profile width to be sensitive functions of the thermal gradient. Application of the model to observation reveals that broad H alpha absorption widths in G and K giant stars are consistent with a mean H alpha chromospheric optical depth of 50, while narrower widths in M stars indicate slightly lower opacities. It is proposed that differences in H alpha width between late-type giants of similar spectral type may be due, in part, to differences in their chromospheric thermal gradient, and associated H alpha opacity.

Zarro, D. M.↗
NASA NTRS1984

Consequences of a chromospheric temperature gradient on the width of H-alpha in late-type giants

An analytic expression for the integrated H alpha optical depth profile is derived for a one dimensional slab geometry model chromosphere, with electron temperature increasing as a power law with height. The formula predicts H alpha opacity and profile width to be sensitive functions of the thermal gradient. Application of the model to observation reveals that broad H alpha absorption widths in G and K giant stars are consistent with a mean H alpha chromospheric optical depth of 50, while narrower widths in M stars indicate slightly lower opacities. It is proposed that differences in H alpha width between late-type giants of similar spectral type may be due, in part, to differences in their chromospheric thermal gradient, and associated H alpha opacity.

Zarro, D. M.↗
NASA NTRS2018

Advances in Above- and In-Water Radiometry, Volume 2: Autonomous Atmospheric and Oceanic Observing Systems

This publication documents the scientific advances associated with new instrument systems and accessories built to improve above- and in-water observations of the apparent optical properties (AOPs) of optically complex waters. The principal objective is to be prepared for the launch of next-generation ocean color satellites with the most capable commercial off-the-shelf (COTS) instrumentation in the shortest time possible. The Hybridspectral Alternative for Remote Profiling of Optical Observations for NASA Satellites (HARPOONS) is presented as a case example of technologies conceived, developed, and deployed operationally in support of next-generation mission requirements. The field trials, field commissioning, and operational demonstration resulted in a technology readiness level (TRL) value of 9 for a diversity of laboratory and field instrument systems. Separate detailed presentations of the individual instruments provide the hardware designs, accompanying software for data acquisition and processing, and examples of the results achieved. For the laboratory components, calibration and characterization procedures are described along with an estimation of the sources of uncertainty, which culminates in a full uncertainty budget for the radiometers deployed to the field.

Hooker, Stanford B.↗
NASA NTRS1982

Design, fabrication and evaluation of chalcogenide glass Luneburg lenses for LiNbO3 integrated optical devices

Optical waveguide Luneburg lenses of arsenic trisulfide glass are described. The lenses are formed by thermal evaporation of As2S3 through suitably placed masks onto the surface of LiNbO3:Ti indiffused waveguides. The lenses are designed for input apertures up to 1 cm and for speeds of f/5 or better. They are designed to focus the TM sub 0 guided mode of a beam of wavelength, external to the guide, of 633 nm. The refractive index of the As2S3 films and the changes induced in the refractive index by exposure to short wavelength light were measured. Some correlation between film thickness and optical properties was noted. The short wavelength photosensitivity was used to shorten the lens focal length from the as deposited value. Lenses of rectangular shape, as viewed from above the guide, as well as conventional circular Luneburg lenses, were made. Measurements made on the lenses include thickness profile, general optical quality, focal length, quality of focal spot, and effect of ultraviolet irradiation on optical properties.

Wood, V. E.↗
NASA NTRS1995

ROSAT observations of NGC 2146: Evidence for a starburst-driven superwind

We have imaged the edge-on starburst galaxy NGC 2146 with the Position Sensitive Proportional Counter (PSPC) and the High Resolution Imager (HRI) on board ROSAT and have compared these data to optical images and long-slit spectra. NGC 2146 possesses a very large X-ray nebula with a half-light radius of 1 min (4 kpc) and a maximum diameter of approximately 4 min, or 17 kpc. The X-ray emission is resolved by the PSPC and preferentially oriented along the minor axis, with a total flux of 1.1 x 10(exp -12) ergs/sq cm/s over 0.2 - 2.4 keV and a luminosity of approximately 3 x 10(exp 40) ergs/s. The inner X-ray nebula is resolved by the HRI into at least four bright knots together with strong diffuse emission responsible for at least 50% of the flux within a radius of 0.5 min (approximately 2 kpc). The brightest knot has a luminosity of (2 - 3) x 10(exp 39) ergs/s. The X-ray nebula has a spatial extent much larger than the starburst ridge seen at centimeter wavelengths by Kronberg & Biermann (1981) and is oriented in a `X-like' pattern along the galaxy minor axis at a position angle of approximately 30 degrees. This minor-axis X-ray emission is associated with a region of H alpha and dust filaments seen in optical images. Optical spectra show that the emission-line gas along the minor axis is characterized by relatively broad lines (approximately 250 km/s full width half-maximum (FWHM)) and by `shocklike' emission-line flux ratios. Together with the blue-asymmetric nuclear emission-line and NaD interstellar absorption-line profiles, these optical data strongly suggest the presence of a starburst-driven superwind. The X-ray spectrum extracted from the central 5 min contains a strong Fe L emission-line complex at 0.6 - 1.0 keV and a hard excess above 1.0 keV. The spectrum is best described with a two-component model, containing a soft (kT approximately 400 - 500 eV) Raymond-Smith thermal plasma together with either a Gamma = 1.7 power-law or a kT greater than 2.2 keV bremsstrahlung component. The soft thermal component provides approximately 30% of the total luminosity over 0.2 - 2.4 keV, or approximately 10(exp 40) ergs/s. The pressure derived from the soft component of the X-ray spectrum is consistent with that predicted from a starburst-driven superwind if the filling factor of the warm gas is approximately 1% - 10 %. If the hard X-ray component is thermal gas associated with the galactic outflow, the filling factor must be close to unity. Predictions of the luminosity, temperature, and size of an adiabatic starburst-generated windblown bubble are consistent with those measured for the soft thermal X-ray emission in NGC 2146. The hard X-ray component, however, has a luminosity much larger than predicted by the superwind model if this component is thermal emission from gas heated by an internal shock in the expanding bubble. We briefly review various possibilities as to the nature of the hard X-ray component in NGC 2146.

Armus, L.↗
NASA NTRS1986

Solar chromospheric modeling based on submillimeter limb brightness profile

A method of modeling the solar chromosphere is developed, based on submillimeter continuum observations of the solar limb. Submillimeter radiation from the solar limb emanates from the chromosphere in local thermodynamic equilibrium, making it an important chromospheric diagnostic. Also, the use of high-resolution limb profiles allows for atmospheric modeling independent of gravitational hydrostatic equilibrium. The chromospheric model is constructed to match high-resolution solar limb profiles at 30, 50, 100, and 200 microns, determined by an occultation of the solar limb observed from the Kuiper Airborne Observatory during the total solar eclipse of July 31, 1981. This matching is achieved by 'stretching' the solar model atmosphere of Vernazza, Avrett, and Loesser (1981) vertically out of hydrostatic equilibrium, while maintainingn its vertical temperature-optical depth profile.

Hermans, L. M.↗
NASA NTRS2012

Fast Simulators for Satellite Cloud Optical Centroid Pressure Retrievals, 1. Evaluation of OMI Cloud Retrievals

The cloud Optical Centroid Pressure (OCP), also known as the effective cloud pressure, is a satellite-derived parameter that is commonly used in trace-gas retrievals to account for the effects of clouds on near-infrared through ultraviolet radiance measurements. Fast simulators are desirable to further expand the use of cloud OCP retrievals into the operational and climate communities for applications such as data assimilation and evaluation of cloud vertical structure in general circulation models. In this paper, we develop and validate fast simulators that provide estimates of the cloud OCP given a vertical profile of optical extinction. We use a pressure-weighting scheme where the weights depend upon optical parameters of clouds and/or aerosol. A cloud weighting function is easily extracted using this formulation. We then use fast simulators to compare two different satellite cloud OCP retrievals from the Ozone Monitoring Instrument (OMI) with estimates based on collocated cloud extinction profiles from a combination of CloudS at radar and MODIS visible radiance data. These comparisons are made over a wide range of conditions to provide a comprehensive validation of the OMI cloud OCP retrievals. We find generally good agreement between OMI cloud OCPs and those predicted by CloudSat. However, the OMI cloud OCPs from the two independent algorithms agree better with each other than either does with the estimates from CloudSat/MODIS. Differences between OMI cloud OCPs and those based on CloudSat/MODIS may result from undetected snow/ice at the surface, cloud 3-D effects, low altitude clouds missed by CloudSat, and the fact that CloudSat only observes a relatively small fraction of an OMI field-of-view.

Joiner, J.↗
NASA NTRS1995

Airborne and Ground-Based Optical Depth Measurements in Canada and California During LITE

The NASA Ames Airborne Autotracking Sunphotometer was used to obtain correlative optical depth measurements in conjunction with LITE (Lidar-In-Space Technology Experiment) measurements during STS-64 Orbits 35, 66, and 82, The sunphotometer was operated on, board the NASA C-130 and obtained data in Canada a few hours prior to the shuttle overpass during Orbit 35. Because of the approximate two-hour slip in STS-64 launch time, all overpasses in Canada after Orbit 35 occurred after local sunset. Therefore, immediately following the Orbit 35 C-130 flight, the sunphotometer was removed from the C-130 and transported via commercial carrier to Southern California, where ground-based measurements were taken prior to and during the shuttle overflights of Orbits 66 and 82. Vertical profiles of optical depth spectra, as well as ground-based spectra, are shown. The spectra derived from measurements acquired during Orbits 66 and 82 are compared with analogous spectra derived from solar radiometer measurements obtained by the University of Arizona at various Southern California sites. Both data sets are available for comparison to nearby LITE measurements and for calculation of backscatter-to-extinction ratios, derivation of aerosol size distributions, and use in transmission-correction of LITE signal profiles.

Russell, Philip B.↗