Search NASA⌕ Search

SEARCH · Search NASA

Results for “oriented”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Atomistic Mechanisms of the Crystallographic Orientation‐Dependent Cu 1.8 S Conductive Channel Formation in Cu 2 S‐Based Memristors

Achieving multiple types of resistive switching in a single material with controlled ionic motion is a key challenge in neuromorphic computing, traditionally addressed by combining materials with distinct switching behaviors. Here, Cu 2-x S is identified as a promising candidate to overcome this limitation due to its hierarchical phase transitions. Using in situ biasing experiments, reversible and non-reversible phase transitions (and resistive switching) are demonstrated in γ-Cu 2 S by controlling the compliance current. The formation of parallel high-digenite Cu 1.8 S channels, orientated along the γ-Cu 2 S [201] crystallographic direction, drives the nonvolatile resistive switching. These channels emerge via an intermediate δ-Cu 2 S phase and are stabilized at room temperature by residual strains, alongside β-Cu 2 S phase. In conclusion, the work clarifies the complex, electrically triggered phase transformations in γ-Cu 2 S, and highlights the potential of Cu 2-x S as a versatile material for neuromorphic computing.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Scan‐Path‐ and Initial‐State‐Dependent Superdomain Switching in (111)‐Oriented PZT

Polarization switching in ferroelectric materials arises from the collective evolution of complex domain hierarchies, yet deterministic control over these processes remains challenging. Here, we investigate scan-path- and initial-state-dependent switching in epitaxial (111)-oriented PbZr 0.2 Ti 0.8 O 3 thin films using automated AFM-based writing combined with quantitative 3D piezoresponse force microscopy. We show that the scan trajectory acts as an experimentally accessible control parameter for superdomain formation. Box-in-box raster scans reproducibly stabilize ordered stripe superdomains with a reduced subset of symmetry-allowed variants, whereas spiral trajectories generate frustrated mixed-variant states with a broader distribution of final microstructures. Automated pulsing experiments further show that the local superdomain configuration at the nucleation site strongly influences the final written morphology. Phase-field modeling qualitatively reproduces the contrast between representative initial-state geometries and supports the role of compatibility constraints among competing ferroelastic pathways. These findings establish scan-path and initial-state engineering as practical handles to program ferroic order in hierarchical ferroelectric domain structures.

Vasudevan, Rama K. [Oak Ridge National Laboratory ↗
DOE OSTI2025

Orientation reversal and the Chern-Simons natural boundary

We show that the fundamental property of preservation of relations, underlying resurgent analysis, provides a new perspective on crossing a natural boundary, an important general problem in theoretical and mathematical physics. This reveals a deeper rigidity aspect of resurgence in a quantum field theory path integral. The physical context here is the non-perturbative completion of complex Chern-Simons theory that associates to a 3-manifold a collection of q-series invariants labeled by Spinc structures, for which crossing the natural boundary corresponds to orientation reversal of the 3-manifold. Our new resurgent perspective leads to a practical numerical algorithm that generates q-series which are dual to unary q-series composed of false theta functions. Until recently, these duals were only known in a limited number of cases, essentially based on Ramanujan’s mock theta functions, and the common belief was that the duals might not even exist in the general case. Resurgence analysis identifies as primary objects Mordell integrals: up to changes of variables, they are Laplace transforms of resurgent functions. Their unique Borel summed transseries decomposition on either side of the Stokes line is simply the unique decomposition into real and imaginary parts. In turn, the latter are combinations of unary q-series in terms of q and its modular counterpart $\overset{\sim }{q}$ , and are resurgent by construction. The Mordell integral is analytic across the natural boundary of the q and $\overset{\sim }{q}$ series, and uniqueness of a similar decomposition which preserves algebraic relations on the other side of the boundary defines the unique boundary crossing of the q series. We demonstrate that this continuation can be efficiently implemented numerically. In the cases where unique mock modular identities are known, they are found by this numerical procedure, but the procedure can go well beyond the known list of identities. A particularly interesting feature of the resurgent approach is that it reveals new aspects, and is very different from other known approaches based on indefinite theta series, Appell-Lerch sums, and representation theory of logarithmic vertex operator algebras.

Chern-Simons theories↗
DOE OSTI2026

Microfibril orientation and compositional heterogeneity in fiber and vessel cell walls of poplar xylem studied by AFM-IR and SFG spectroscopy

Understanding the structural organization of cellulose microfibrils (CMFs) within individual plant cell walls is essential for connecting cell wall architecture to its mechanical and physiological functions. However, due to the complex hierarchical structure and nanoscale heterogeneity of cell walls, it remains technically challenging to resolve detailed compositional and orientational information at subcellular levels of individual cell walls. This study investigates the internal 3D structure, chemical composition, and sublayer organization of fiber and vessel cell walls in the xylem tissue of a two-year-old field-grown hybrid poplar tree (Populus alba × P. glandulosa) using photothermal atomic force microscopy coupled with infrared spectroscopy (AFM-IR) and sum frequency generation (SFG) hyperspectral microscopy. AFM-IR provided nanoscale chemical imaging, revealing localized compositional heterogeneity, including variations between adjacent cell walls and transitional layers beyond the traditional S1, S2, and S3 sublayers. SFG microscopy revealed that CMFs in fiber walls are highly aligned along the stem axis, consistent with their role in mechanical support, while vessel cell walls exhibited slightly tilted CMFs, reflecting their function in hydraulic transport. Together, these results offer new insights into cell-type-specific CMF organization and compositional gradients in hybrid poplar xylem. These findings highlight the structural and chemical complexity of secondary cell walls in woody plants and demonstrate the value of AFM-IR and SFG spectroscopy in elucidating plant cell wall architecture.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Butterfly valve performance factors using the multiphysics object oriented simulation environment

Butterfly valves are typically used in nuclear reactors to control incompressible fluid flow with high inlet velocities. Performance factors for butterfly valves include the pressure drop across the valve and the loss coefficient from which hydrodynamic torque and flow coefficients can be computed. This work explores a computational fluid dynamics approach for butterfly valve performance factors using the open-source Multiphysics Object Oriented Simulation Environment (MOOSE) framework. While MOOSE is often used in the nuclear energy modeling and simulation community for simulations ranging from fuel characterization to heat pipe simulation, this work employs the MOOSE open-source Navier–Stokes solver capability for simulating butterfly valve performance factors and compares those to experimentally measured results from the Advanced Test Reactor at Idaho National Laboratory at Reynolds numbers in the order of 10 6 for the partially opened configuration. The MOOSE framework results are compared against experimentally measured butterfly valve performance factors across five valve opening angles using meshes with order 10 4 – 10 5 elements. This validation serves to enable MOOSE-based multiphysics simulations incorporating the open-source Navier–Stokes module.

97 - MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Comparative Evaluation of Control-Oriented Heavy Duty Vehicle Air Drag Coefficient Models

Heavy-duty vehicles (HDVs) are a significant source of fuel consumption and greenhouse gas emissions, prompting solutions such as HDV platooning to mitigate these negative impacts through air drag reduction. The intervehicle distance in an HDV platoon needs to be carefully selected, such that the platoon-level energy efficiency and safety considerations can be well balanced. Underlying this problem lies in accurately modeling the relationship between HDV air drag coefficient and intervehicle distance. Through comprehensive evaluation and comparison, we analyze five control-oriented HDV air drag coefficient models, including the polynomial model, rational polynomial model, rational model, semi-quadratic model, and ridge model. Leveraging Scipy Curve-Fit toolbox and our previously compiled air drag coefficient datasets, we optimally identify the parameters inside each model. The calibrated models are then thoroughly evaluated via five complementary metrics. The comparison results reveal that the semi-quadratic model has the highest overall performance, while the widely adopted rational model only exhibits suboptimal performance.

Best, Micah↗
DOE OSTI2025

Localized orientation gradients in additively manufactured stainless steel 316H structures

The high solidification rates during additive manufacturing cause highly localized thermal and strain gradients. The effect of these gradients on the evolution of local orientation misorientations within a grain is not well understood. In this study, stainless steel 316H parts were fabricated via laser powder bed fusion using three different energy densities: 43, 71, and 135 J/mm 3 . Electron backscatter diffraction showed that the maximum misorientations of the grains can be up to 25° along the build direction. Misorientation gradients (RM g ) within grains are process-dependent and can change from 0.036°/μm to 0.015°/μm with increased volumetric energy densities. In conclusion, the characterized misorientation gradients are an indication of the level of dislocations and, to an extent, the plastic deformation resulting from the rapid solidification during laser powder bed fusion.

316H↗
DOE OSTI2024

Orientation Sensitive SEIRA Sensors Based on Single-Walled Carbon Nanotube Near Fields

Molecular vibrations that bear information about intrinsic properties of chemical compounds are challenging to detect at submonolayer densities. Surface-enhanced infrared absorption (SEIRA) spectroscopy has been proven to be a viable approach to enhance and detect weak vibration signals. Here, in this study, we report a SEIRA sensor based on mid-infrared surface plasmon resonances supported by single-walled carbon nanotubes (SWCNTs). Due to the 1D nature of SWCNTs, their plasmon modes are highly polarized with the electromagnetic fields spatially confined to nanometer scales. Leveraging these characteristics of SWCNTs, we observe a polarization selective coupling between their surface plasmons and vibrational modes of chemical bonds introduced onto their surfaces. A maximum modulation of similar to 15% to the plasmon resonance peak is obtained for a submonolayer chemical group coverage. These findings suggest that SWCNTs may potentially serve as a highly sensitive SEIRA platform for revealing intricate information about molecular compositions and bond orientations.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Vertically Self-Oriented, Ultrafast 1D ZnO:Li Nanorods as Scintillators for Thermal Neutron Detection

Detection of special nuclear materials (SNMs) is of vital importance in the prevention of nuclear terrorism and to secure states’ national security. Neutron detection is a particularly useful tool to identify SNM, and neutron-sensitive scintillators have many promising properties, such as ease of use, good time resolution, and high detection efficiency. In this work, we develop highly stable, self-oriented, ultrafast 1D ZnO:Li (and codoped with Al, Ga, and In) nanorods (NRs) as thermal neutron-sensitive scintillators. Lithium-6 has high thermal neutron cross section for the (n, α) reaction in ZnO:Li scintillators which have a vertical nano array design greatly increasing the effective surface area and scintillation efficiency. Cost-effective low-temperature (95 °C) hydrothermal growth is used to obtain highly crystalline ZnO:Li nano scintillators by combining nuclear range data and electron transport mechanisms. Among the studies using low-temperature hydrothermal synthesis and a relatively low annealing temperature (≈350 °C) along with optimized NRs (length ≈ 5–8 μm, mean diameter ≈ 700 nm) for thermal neutron detection, this study reports the shortest scintillation decay time (≈ 470 ps) so far to the best of our knowledge. In conclusion, this nano array scintillator combines the advantages of a low-cost growth technique with environmentally friendly and widely available materials.

Ions↗
DOE OSTI2024

Tailoring-Orientated Deposition of Li 2 S for Extreme Fast-Charging Lithium–Sulfur Batteries

Precipitation/dissolution of insulating Li 2 S has long been recognized as the rate-determining step in lithium-sulfur (Li-S) batteries, which dramatically undermines sulfur utilization at elevated charging rates. Herein, we present an orientated Li 2 S deposition strategy to achieve extreme fast charging (XFC, ≤15 min) through synergistic control of porosity, electronic conductivity, and anchoring sites of electrode substrate. Via magnesiothermic reduction of a zeolitic imidazolate framework, a nitrogen-doped and hierarchical porous carbon with highly graphitic phase was developed. This design effectively reduces interfacial resistance and ensures efficient sequestration of polysulfides during deposition, leading to (110)-preferred growth of Li 2 S nanocrystalline between (002)-dominated graphitic layers. Our approach directs an alternative Li 2 S deposition pathway to the commonly reported lateral growth and 3D thickening growth mode, ameliorating the electrode passivation. Therefore, a Li-S cell capable of charging/discharging at 5C (12 min) while maintaining excellent cycling stability (82% capacity retention) for 1000 cycles is demonstrated. In conclusion, even under high S loading (8.3 mg cm -2 ) and low electrolyte/sulfur ratio (3.8 mL mg -1 ), the sulfur cathode still delivers a high areal capacity of >7 mAh cm -2 for 80 cycles.

25 ENERGY STORAGE↗
DOE OSTI2025

Orientation-Driven Chirality Funnels in Chiral Low-Dimensional Lead-Halide Perovskite Heterostructures

Chiral hybrid metal-halide perovskites show low-symmetry crystal structures, large Rashba splitting, spin-filtering, and strong chiroptical activity. Circular dichroism and circularly polarized photoluminescence have been investigated in chiral perovskites with increasingly distorted chiral structures. Here, we report the fabrication of chiral (R/S)-EBAPbI3 (EBA = α-ethylbenzylamine) single crystals, which possess highly distorted octahedral structures with a high angle variance value of ∼68 degree2. Using control in the fabrication conditions, we transfer chiral single crystals to thin films and achieve different crystal orientation preferences that induce tunable chiroptical properties to their heterostructures with PbI2 nanodomains, which we characterize with in situ X-ray diffraction and grazing-incidence wide-angle X-ray scattering measurements. Using transient chiroptical spectroscopies, we resolve photoexcited charge carrier dynamics and chirality transfer processes in such heterostructures down to cryogenic temperatures. We observe rapid carrier transfer along the in-plane (002) facets in chiral perovskite phases to PbI2 nanostructures within the initial few picoseconds, while carrier transfer along the out-of-plane (002) facets occurs at a slower rate. This fast transfer process leads to high photoluminescence intensities and large degrees of circular polarization in the emission from PbI2 nanodomains at cryogenic temperatures. Our findings report a multidimensional chiral-achiral heterostructure which takes advantage of controllable chirality transfer and offers new routes for future spintronic and chiroptical applications.

Liu, Shangpu↗
DOE OSTI2025

Frustrated charge density wave and quasi-long-range bond-orientational order in the magnetic kagome FeGe

The intrinsic frustrated nature of a kagome lattice is amenable to the realization of exotic phases of matter, such as quantum spin liquids or spin ices, and the multiple-q charge density waves (CDW) in the kagome metals. Despite intense efforts to understand the mechanism driving the electronic modulations, its origin is still unknown and obscured by competing interactions and intertwined orders. Here, we identify a dimerization-driven 2D hexagonal charge-diffuse precursor in the antiferromagnetic kagome metal FeGe and demonstrate that the fraction of dimerized/undimerized states is the relevant order parameter of the multiple-q CDW of a continuous phase transition. The pretransitional charge fluctuations with propagation vector q = q M at T CDW < T < T*(125 K) are anisotropic, hence holding a quasi-long-range bond-orientational order. The broken translational symmetry emerges from the anisotropic diffuse precursor, akin to the Ising scenario of antiferromagnetic triangular lattices. The temperature and momentum dependence of the critical scattering show parallels to the stacked hexatic B-phases reported in liquid crystals and transient states of CDWs and highlight the key role of the topological defect-mediated melting of the CDW in FeGe.

Subires, D. [Donostia International Physics Center↗
DOE OSTI2026

Magnetization orientation-dependent Shubnikov-de Haas oscillations in ferromagnetic Weyl semimetal Co 3 Sn 2 S 2

We report a study of Shubnikov–de Haas oscillations in high-quality single crystals of ferromagnetic Weyl semimetal Co 3 Sn 2 S 2 . The Fermi surfaces resolved in our experiments are three-dimensional and reflect an underlying trigonal crystallographic symmetry. Combined with density functional calculations, we identify that multiple Fermi surfaces in the system—of both electron and hole nature—arise from the energy dispersion of the (spin-orbit gapped) mirror-protected nodal rings. We observe an evolution of the Fermi surfaces with in-plane magnetic fields, in contrast to field perpendicular to the kagome lattice planes, which has little effect. Viewed alongside the easy-axis anisotropy of the system, our observation reveals an evolution of the electronic structure of Co 3 Sn 2 S 2 —including the Weyl points—with the ferromagnetic moment orientation. Through the case study of Co 3 Sn 2 S 2 , our results provide concrete experimental evidence of an anisotropic interplay via spin-orbit coupling between the magnetic degrees of freedom and electronic band singularities, which has long been expected in semimetallic and metallic magnetic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Energy-resolved neutron imaging and diffraction including grain orientation mapping using event camera technology

Time-of-flight neutron diffraction and energy-resolved imaging each provide unique perspectives into material properties. Neutron diffraction is useful for assessing microstructural parameters such as phase composition, texture, and dislocation densities, though it typically provides averaged data over the sampled volume. Energy-resolved imaging, on the other hand, offers both spatial and spectral information by detecting Bragg edges and neutron absorption resonances, which enables detailed mapping of microstructure and isotopic composition. When combined, these techniques have the potential to enrich our understanding of material behavior across different scales, enhancing our understanding of complex materials. Traditionally, these modalities are conducted on separate instruments, which is time-consuming and poses challenges for data integration. Here, we report the integration of the LumaCam, an event-mode energy-resolved neutron imaging camera with the HIPPO time-of-flight diffractometer at LANSCE. This integration enables simultaneous diffraction and imaging across the full spectrum, with analysis optimized for diffraction and Bragg-edge imaging in the thermal range (0.45–10 Å) and resonance imaging in the epithermal range (0.5–3000 eV), facilitating comprehensive multi-modal analysis. We demonstrate its capabilities through case studies, including spatial mapping of grain orientations in a steel sample and accurate thickness estimations for irregular samples including a depleted uranium cylinder and a natural silver-containing mineral specimen. The combined setup enhances real-time sample alignment and provides comprehensive data for crystal structure, texture, and isotopic composition analysis. This approach opens new possibilities for advanced applications in nuclear engineering, archaeology, and materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Performance characterization of x-ray crystal spectroscopy highly oriented pyrolytic graphite reflectors based on x-ray diffractometry experiments

The use of Highly Oriented Pyrolytic Graphite (HOPG) reflectors is often proposed in the design of X-ray Crystal Spectroscopy (XCS) diagnostic systems for the next-generation tokamak devices, including the ITER project. Here, this study introduces an experimental study based on the X-Ray Diffractometry (XRD) method to evaluate the performance of HOPG reflectors. The experimental method provides both the angular responses and the reflectivities of the HOPG reflectors. A demonstrative XRD experiment is conducted, and the details of the experiment are introduced. This method enables precise studies on HOPG reflectors, facilitating the design of XCS diagnostic systems for future tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Diffusion-mediated passing of molecular species in linear nanopores constrained by orientational alignment

For diffusion-mediated catalytic conversion reactions in materials with narrow linear nanopores, e.g., mesoporous silica MCM-41, a key parameter is the propensity for product species to be able to pass reactant species and thus to efficiently exit the pore. For elongated species, this can require orientational alignment with the pore axis. In this work, we perform benchmark analyses for such solution-phase systems where one of these species is elongated in order to quantify the dependence of this passing propensity, P, on pore diameter and on the rotational diffusion coefficient, Dr, of the elongated species. In particular, we consider the passing of a spherical and an elongated spherocylindrical shaped species in a cylindrical pore in an implicit solvent, where these species cannot overlap. Passing is mediated by diffusive Brownian motion of these species as described by strongly damped Langevin dynamics. We quantify scaling of P for pore width just above the threshold where passing is sterically blocked, and also reveal a significant decrease in P for lower Dr. We also consider the dependence of P on the aspect ratio of the elongated species and obtain an exact result in the limiting regime of large aspect ratio.

Brownian motion↗
DOE OSTI2026

Orientation-tunable local crystallization of Si films enabled by atomic imprint crystallization

Here, in this paper, we demonstrate area-selective crystallization of amorphous Si into tunable crystal orientations enabled by atomic imprint crystallization (AIC), where an amorphous Si layer is crystallized by solid phase epitaxy (SPE) from an externally impressed single-crystalline Si template. Using micro-patterned single-crystalline Si templates, a limited area of an amorphous Si film, where the film surface and patterned template surface are in contact, is crystallized via SPE to create an array of crystallographically aligned dots embedded in amorphous matrix. Combining AIC from the top surface and conventional SPE from the substrate, we demonstrate the fabrication of an array of crystalline dots embedded in single-crystalline matrix with tunable in-plane rotation angle. The results indicate the high tunability of the crystallization process enabled by AIC, allowing precise control of crystallographic properties of thin films with area-selectivity; such capability opens opportunities for the design of new materials for a wide range of applications in materials science.

Amorphous↗