Search NASA⌕ Search

SEARCH · Search NASA

Results for “outcrop”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Rates of subcritical cracking and long-term rock erosion

Bedrock fracture is a key element of rock erosion and subsequent surface processes. We test the hypothesis that rock's susceptibility to subcritical cracking, a specific type of fracturing, significantly drives and limits rock erosion. We measured 10 Be-derived erosion rates, compressive strength, and crack characteristics on 20 outcrops of different rock units (quartzite, granite, and two metasandstones) in the northern Blue Ridge Mountains of Virginia (USA). We also measured the subcritical cracking index (n), Charles’s law velocity constant (A), and fracture toughness (K IC ) of samples from four of the same outcrops, representative of each rock type. Erosion rates range from 1.16 ± 0.67 to 32.3 ± 7.8 m/m.y. We find strong correlations—across the four rock units—between average erosion rates and the three subcritical cracking parameters (R 2 > 0.85, p < 0.05), but not compressive strength (R 2 = 0.6; p > 0.1). We also find a correlative relationship between n and outcrop fracture length (R 2 = 0.91; p < 0.05). The latter correlation is consistent with that of published model predictions, further indicating a mechanistic link between subcritical cracking and rock erosion. We infer that subcritical cracking parameters closely tie to erosion rates, because subcritical cracking is the dominant process of mechanical weathering, leading to positive feedbacks relating subcritical cracking rates, crack length, porosity, and water accessibility. Finally, these data are the first that directly test and support the hypothesis that subcritical cracking can set the pace of long-term rock erosion.

58 GEOSCIENCES↗
DOE OSTI2024

Fracture length data for geothermal applications

Fracture lengths govern permeability and are unknowns in geothermal assessment. Along their lengths, fracture widths vary due to growth by linkage. Under the influence of diagenesis, narrow widths seal, breaking porosity continuity and reducing open length. The largest range of widths and thus susceptibility to fill occurs where fractures are linked by narrow segments. Outcrops of a geothermal target, Cambrian Potsdam quartz arenite, contain opening-mode fractures having lengths spanning five orders of magnitude from 0.082 mm to 17.9 m. Combined lengths measured at a range of scales can be described by power laws, but at a given image resolution, lengths are best fit by exponential functions. Owing to preferential sealing of small fractures, open fractures follow exponential functions, but values depend on rules for designating fractures as continuous. En échelon segments, offset 10 mm, are connected by narrow fractures or microfractures (hard linked) not evident on outcrop 1 m-elevation LiDAR or 30 m-height drone images. A rule that identifies where narrow and likely connected segments are located can yield lengths meaningful for flow simulation. Depending on diagenesis, continuity rules can halve or double average and maximum length values. Length values from outcrop for geothermal applications should be adjusted based on wellsite-specific diagenesis information.

15 GEOTHERMAL ENERGY↗
DOE OSTI2022

Surface Water Mass Transformation in the Southern Ocean: The Role of Eddies Revisited

The water mass transformation (WMT) framework describes how water of one class, such as a discrete interval of density, is converted into another class via air–sea fluxes or interior mixing processes. Here, this paper investigates how this process is modified at the surface when mesoscale ocean eddies are present, using a state-of-the-art high-resolution climate model with reasonable fidelity in the Southern Ocean. The method employed is to coarse-grain the high-resolution model fields to remove eddy signatures, and compare the results with those from the full model fields. This method shows that eddies reduced the WMT by 2–4 Sv (10%–20%; 1 Sv ≡ 10 6 m 3 s −1 ) over a wide range of densities, from typical values of 20 Sv in the smoothed case. The corresponding water mass formation was reduced by 40% at one particular density increment, namely, between 1026.4 and 1026.5 kg m −3 , which corresponds to the lighter end of the range of Indian Ocean Mode Water in the model. The effect of eddies on surface WMT is decomposed into three terms: direct modulation of the density outcrops, then indirectly, by modifying the air–sea density flux, and the combined effect of the two, akin to a covariance. It is found that the first and third terms dominate, i.e., smoothing the outcrops alone has a significant effect, as does the combination of smoothing both outcrops and density flux distributions, but smoothing density flux fields alone has little effect. Results from the coarse-graining method are compared to an alternative approach of temporally averaging the data. Implications for climate model resolution are also discussed.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1972

Space configuration as an explanation for lithology-related cross-polarized radar image anomalies

Three rock types are described that produce dark cross-polarized images on Ka-band imagery: lava flows dating from Pleistocene and Holocene, some Tertiary volcanics, and certain massive sandstones. Their planar surfaces are large with respect to the wavelength of the Ka-band system, yet are small in comparison to the resolution. It is found that only outcrops with proper faceted surface orientations produce significant radar returns showing the dominance of specular reflectors. The omnidirectional attitude of the facets and their wide distribution on the outcrops explains the independence of look-direction that the flat-lying anomalous outcrops exhibit in production of darker cross-polarized images.

Mccauley, J. R.↗
NASA NTRS1977

Application of standard photogeologic techniques to LANDSAT imagery for mineral exploration in the basin and range province of Utah and Nevada

The author has identified the following significant results. Standard photogeologic techniques were applied to LANDSAT imagery of the basin and range province of Utah and Nevada to relate linear, tonal, textural, drainage, and geomorphic features to known mineralized areas in an attempt to develop criteria for the location of mineral deposits. No consistent correlation was found between lineaments, mapped according to specified criteria, and locations of mines, mining districts, or intrusive outcrops. Tonal and textural patterns were more closely related to geologic outcrop patterns than to mineralization. A statistical study of drainage azimuths of various length classes as measured on LANDSAT showed significant correlation with mineralized districts in the length class of 3-6 km. Alignments of outcrops of basalt, a rock type highly visible on LANDSAT imagery, appear to be colinear with acidic and intermediate intrusive centers in some areas and may assist on the recognition of regional fracture systems for mineral exploration.

Lattman, L. H.↗
NASA NTRS1992

Suevite superposition on the Bunte breccia in Noerdlinger Ries, Germany: New findings on the transport mechanism of impactites

Research undertaken in the last decades in Noerdlinger Ries, Germany, has repeatedly emphasized the sharp contact between Bunte breccia and suevite. However, extensive investigations into this layer boundary have not yet been possible due to insufficient outcrop ratios. New outcrops enabled an in-depth investigation into the superposition of suevite on the Bunte breccia, which is assigned a key role in interpreting the transport mechanisms of ejecta of large impact. In two quarries lying several kilometers east and south-southwest of the crater, the contact between the suevite and Bunte breccia was recorded in detailed sections on outcrops of over 50 m in length.

Bringemeier, D.↗
NASA NTRS2005

Weathering of Basaltic Rocks from the Gusev Plains up into the Columbia Hills from the Perspective of the MER Mossbauer Spectrometer

Rocks on the ejecta blanket of Bonneville crater and along Spirit s traverse over the Gusev plains towards the Columbia Hills are angular and strewn across the surface. They have a basaltic composition [1,2], and their Mossbauer spectra are dominated by an olivine doublet [1]. The ubiquitous presence of abundant olivine in rocks and in surrounding soil suggests that physical rather than chemical weathering processes currently dominate the plains at Gusev crater [1]. However, MB spectra of rocks and outcrops in the Columbia Hills suggest more aggressive alteration processes have occurred. Ascending into the hills, Spirit encountered outcrop and rocks exhibiting layered structures. Some scattered rocks at the foot of the Columbia Hills appeared "rotten" or highly altered by physical and/or chemical processes (fig. 1). Mossbauer spectra of those rocks show a decrease in olivine accompanied by an increase in the Fe-oxides magnetite, hematite, and nanophase Fe3+ -oxides (fig. 2), suggesting that chemical weathering processes in the presence of water have altered these rocks and outcrops.

Schroeder, C.↗
NASA NTRS2007

Iron Mineralogy and Aqueous Alteration on Mars from the MER Moessbauer Spectrometers

The twin Mars Exploration Rovers Spirit (Gusev crater) and Opportunity (Meridiani Planum) used MIMOS II Moessbauer spectrometers to analyze martian surface materials in the first application of extraterrestrial Moessbauer spectroscopy. The instruments acquired spectra that identified the speciation of Fe according to oxidation state, coordination state, and mineralogical composition and provided quantitative information about the distribution of Fe among oxidation states, coordination states, and Fe-bearing phases. A total of 12 unique Fe-bearing phases were identified: Fe(2+) in olivine, pyroxene, and ilmenite; Fe(2+) and Fe(3+) in magnetite and chromite; Fe(3+) in nanophase ferric oxide (npOx), hematite, goethite, jarosite, an unassigned Fe3+ sulfate, and an unassigned Fe(3+) phase associated with jarosite; and Fe(0) in kamacite. Weakly altered basalts at Gusev crater (SO3 = 2.5 +/- 1.4 wt.% and Fe(3+)/Fe(sub T) = 0.24 +/- 0.11) are widespread on the Gusev plains and occur in less abundance on West Spur and Husband Hill in the Columbia Hills. Altered low-S rocks (SO3 = 5.2 +/- 2.0 wt.% and Fe(3+)/Fe(sub T) = 0.63 +/- 0.18) are the most common type of rock in the Columbia Hills. Ilm-bearing, weakly altered basalts were detected only in the Columbia Hills, as was the only occurrence of chromite in an altered low-S rock named Assemblee. Altered high-S rocks (SO3 > 14.2 wt.% and Fe(3+)/Fe(sub T) = 0.83 +/- 0.05) are the outcrop rocks of the ubiquitous Burns formation at Meridiani Planum. Two Fe(0)-bearing rocks at Meridiani Planum (Barberton and Heat Shield Rock) are meteorites. Laguna Class soil is weakly altered (SO3 = 6 +/- 2 wt.% and Fe(3+)/Fe(sub T) = 0.29 +/- 0.08) and widely distributed at both Gusev crater and Meridiani Planum, implying efficient global mixing processes or a global distribution of precursor rocks with comparable Fe mineralogical compositions. Paso Robles Class soil is heavily altered (SO3 approx. 31 wt.% and Fe(3+)/Fe(sub T) = 0.83 +/- 0.05), is relatively uncommon, and occurs as subsurface deposits in the Columbia Hills. Berry Class soil is also heavily altered (SO3 = 5 +/- 1 wt.% and Fe(3+)/Fe(sub T) = 0.60 +/- 0.13) and occurs at Meridiani Planum as lag deposits, at the crests of aeolian bedforms, and as isolated pockets on outcrop surfaces. Magnetite is identified as the strongly magnetic component in martian soil. Jarosite (in the Burns outcrop at Meridiani Planum) and goethite (in Clovis Class rocks at Gusev crater) are mineralogical markers for aqueous processes because they contain the hydroxide anion (OH(-)) as an essential part of their structure. Each yields approx.10 wt.% H2O upon dehydroxylation. The presence of Fe sulfates on opposite sides of Mars is evidence that aqueous processes under acid sulfate conditions are or were common. Except for Independence Class rocks in the Columbia Hills, the overall Fe mineralogical compositions and similar basaltic bulk chemical compositions (calculated with respect to S = Cl = 0) of the population of altered rocks analyzed by MER imply isochemical alteration of basaltic precursors at low water-to-rock ratios.

Morris, Richard V.↗
NASA NTRS2006

Laboratory Simulated Acid-Sulfate Weathering of Basaltic Materials: Implications for Formation of Sulfates at Meridiani Planum and Gusev Crater, Mars

Acid-sulfate weathering of basaltic materials is a candidate formation process for the sulfate-rich outcrops and rocks at the MER rover Opportunity and Spirit landing sites. To determine the style of acid-sulfate weathering on Mars, we weathered basaltic materials (olivine-rich glassy basaltic sand and plagioclase feldspar-rich basaltic tephra) in the laboratory under different oxidative, acid-sulfate conditions and characterized the alteration products. We investigated alteration by (1) sulfuric-acid vapor (acid fog), (2) three-step hydrothermal leaching treatment approximating an open system and (3) single-step hydrothermal batch treatment approximating a "closed system." In acid fog experiments, Al, Fe, and Ca sulfates and amorphous silica formed from plagioclase-rich tephra, and Mg and Ca sulfates and amorphous silica formed from the olivine-rich sands. In three-step leaching experiments, only amorphous Si formed from the plagioclase-rich basaltic tephra, and jarosite, Mg and Ca sulfates and amorphous silica formed from olivine-rich basaltic sand. Amorphous silica formed under single-step experiments for both starting materials. Based upon our experiments, jarosite formation in Meridiani outcrop is potential evidence for an open system acid-sulfate weathering regime. Waters rich in sulfuric acid percolated through basaltic sediment, dissolving basaltic phases (e.g., olivine) and forming jarosite, other sulfates, and iron oxides. Aqueous alteration of outcrops and rocks on the West Spur of the Columbia Hills may have occurred when vapors rich in SO2 from volcanic sources reacted with basaltic materials. Soluble ions from the host rock (e.g., olivine) reacted with S to form Ca-, Mg-, and other sulfates along with iron oxides and oxyhydroxides.

Golden, D. C.↗
NASA NTRS2011

A Terrestrial Analogue from Spitsbergen (Svalbard, Norway) for the Comanche Carbonate at Gusev Crater, Mars

Carbonate occurs at the Comanche outcrops in Gusev Crater on the basis of analyses made by the Mars Exploration Rover Spirit [1]. Taken together, mineralogical data from Spirit's Moessbauer (MB) and Mini-TES spectrometer and chemical data from the APXS spectrometer show that Comanche carbonate has an Mg-Fe-rich bulk chemical composition, is present at high concentrations, and is distributed throughout the outcrop and not just at the MB and APXS analysis location. The granular outcrop texture and the observation that it appears to be resistant to weathering compared with surrounding material [1] imply that the carbonate may be present as a cement. A hydrothermal origin for the Comanche carbonate was inferred by analogy with laboratory experiments and with a carbonate occurrence within the Bockfjord volcanic complex on the island Spitsbergen (Svalbard, Norway) [1]. The laboratory carbonates, synthesized by precipitation from hydrothermal solutions, have (MB) parameters and average bulk chemical compositions that are characteristic of Comanche carbonate. The connection to Comanche carbonate is only through chemical data for certain occurrences of Spitsbergen carbonates. In fact, the common average bulk chemical composition for these Spitsbergen carbonates, the synthetic carbonates, the Comanche carbonate, and also the carbonate globules found in martian meteorite ALH84001 is a chemical constraint consistent with a hydrothermal formation process for all the carbonates [e.g., 1-3]. We develop here a link between MB data for the Comanche carbonate from MER and MB data for certain Spitsbergen carbonate occurrences from laboratory measurements. We also obtained visible and near- IR spectra on Spitsbergen carbonates for comparison with martian carbonate detections made on the basis of CRISM spectral data, e.g., in Nili Fossae [4].

Morris, Richard V.↗
NASA NTRS2015

Multispectral Evidence of Alteration from Murray Ridge to Marathon Valley Observed by the Opportunity Pancam on the Rim of Endeavour Crater, Mars

The Mars Exploration Rover Opportunity has been traversing the rim of the Noachian‐aged, 22 km diameter Endeavour crater. Circa sol 3390 of its mission, Opportunity reached the northern tip of the rim segment known as Solander Point and has since been traversing the rim to the south to its current location at the break in the rim known as Marathon Valley. The rocks making up the rim are dominated by impact breccias consisting of clasts and a finer‐grained matrix. Several segments of the rim are transected by fractures as observed from orbital HiRISE imagery. Pancam multispectral observations of outcrop in these fracture regions, including part of the rim crest dubbed Murray Ridge, the Hueytown fracture, and Marathon Valley have been made. Over the range of 430 to 1010 nm there are changes in the multispectral reflectance signature of the breccia matrix with an increase in 535 nm and 904 nm band depth. This is attributed to oxidation and an increase in ferric oxides in these areas. In situ observations by the rover's APXS also indicate chemical differences associated with the matrix along these fractures, including increasing Fe/Mn southward from Solander Point to a region having an Al‐OH signature in CRISM spectra, and generally higher SO3 in the Hueytown fracture region and the area around Spirit of St. Louis. Overturned rocks observed on Murray Ridge were determined by the APXS to have elevated Mn and Pancam spectra of the high Mn spots have a characteristic red, featureless slope. This spectrum was also observed in association with some coatings on blocks of the sulfate‐rich Grasberg formation. Spectra resembling red hematite are observed in some zones in association with the craterform feature Spirit of St. Louis outside the mouth (to the west) of Marathon Valley. Marathon Valley itself has been observed from orbital hyperspectral observations by the CRISM sensor to host occurrences of Fe/Mg smectite minerals‐ indicating extensive aqueous alteration in this region. Pancam observations in Marathon Valley will play an important role in surveying outcrop and making VNIR spectral comparisons with clay bearing outcrop examined earlier in the mission at the Matijevic Hill region.

Farrand, W. H.↗
NASA NTRS2016

High-Temperature, Perhaps Silicic, Volcanism on Mars Evidenced by Tridymite Detection in High-SiO2 Sedimentary Rock at Gale Crater, Mars

The Mars Science Laboratory (MSL) rover, Curiosity, has been exploring sedimentary rocks within Gale crater since landing in August, 2012. On the lower slopes of Aeolis Mons (a.k.a. Mount Sharp), drill powder was collected from a high-silica (74 wt% SiO2) outcrop named Buckskin (BK). It was a surprise to find that the Buckskin sample contained significant amounts of the relatively rare silica polymorph tridymite. We describe the setting of the Buckskin sample, the detection of tridymite by the MSL Chemistry and Mineralogy (CheMin) X-ray diffraction instrument, and detection implications. Geologic setting: The Buckskin outcrop is part of the Murray formation exposed in the Marias Pass area. The formation was previously studied by CheMin in the Pahrump Hills member [1] where three samples of drill fines were analyzed (Confidence Hills (CH), Mojave2 (MJ) and Telegraph Peak (TP) [2]). Assuming approximately horizontal bedding, the Buckskin outcrop is approx.15 m stratigraphically above the bottom of the Pahrump Hills member. Mudstone, generally characterized by fine lamination, is the dominant depositional facies [1]. Buckskin Mineralogical and Chemical Composition: The CheMin instrument and XRD pattern analysis procedures have been previously discussed [3-6]. The diffraction pattern used for quantitative XRD analysis (Fig. 1) is the sum of the first 4 of 45 diffraction images. The remaining images are all characterized by both on-ring and off-ring diffraction spots that we attributed to poor grain motion and particle clumping. Coincident with particle clumping was a significant decrease in the intensity of the tridymite diffraction peaks (Fig. 2a). The derived mineralogical composition of the crystalline component (derived from the first 4 diffraction images) is given in Table 1. The tridymite is well-crystalline and its pattern is refined as monoclinic tridymite (Fig 1). Mineral chemical compositions were derived from XRD unit cell parameters or obtained from stoichiometry. The XRD-calculated amorphous component was 50 +/- 15 wt%. We constrained the value to 60 wt% because it is the minimum value necessary to give a positive Al2O3 concentration for the amorphous component using APXS data for the post-sieve dump pile (Table 2). The amorphous component has high SiO2 (approx.77 wt%) and high anion (SO3+P2O5+Cl ~10 wt%) concentrations. Calculation shows that a cation-anion balance is achieved if the cations in the amorphous component except SiO2 and TiO2, which do not readily form salts, are assumed to be present as amorphous mixed-cation sulfates, phosphates, and chlorides (or perchlorates/ chlorates).

Morris, R. V.↗
NASA NTRS2016

Localized and Areally Extensive Alterations in Marathon Valley, Endeavour Crater Rim, Mars

Mars Exploration Rover Opportunity is exploring the rim of 22 km diameter, Noachian-aged Endeavour crater. Marathon Valley cuts through the central region of the western rim providing a window into the local lower rim stratigraphic record. Spectra from the Compact Reconnaissance Imaging Spectrometer for Mars show evidence for the occurrence of Fe-Mg smectite in this valley, indicating areally extensive and distinct lithologic units and/or styles of aqueous alteration. The Alpha Particle X-ray Spectrometer has determined the compositions of 59 outcrop targets on untreated, brushed and abraded surfaces. Rocks in the Marathon Valley region are soft breccias composed of mm- to cm-sized darker clasts set in a lighter-toned, finegrained matrix. They are basaltic in non-volatile-element composition and compositionally similar to breccias investigated elsewhere on the rim. Alteration styles recorded in the rocks include: (1) Enrichments in Si, Al, Ti and Cr in more reddish-colored rock, consistent with leaching of more soluble cations and/or precipitation of Si +/- Al, Ti, Cr from fluids. Coprecipitation of Ge-rich phases with Si occurred in the western area only; high water:rock is indicated. Pancam multispectral observations indicate higher nanophase ferric oxide contents, but the rocks have lower Fe contents. The highly localized nature of the red zones indicate they cannot be the source of the widespread smectite signature observed from orbit. (2) Outcrops separated by approximately 65 m show common compositional changes between brushed and abraded (approximately 1 mm deep) targets: increases in S and Mg; decreases in Al, Cl and Ca. These changes are likely due to relatively recent, surface-related alteration of valley rocks and formation of surface coatings under low water:rock. (3) One target, from the center of a region of strong CRISM smectite signature, shows modest differences in composition (higher Si, K; lower Mn) compared to most Marathon Valley rocks, while another target approximately 40 cm away on the same outcrop does not; a change towards smectite bulk compositions is not observed. The smectite signature likely resulted from alteration under low water:rock such that primary minerals were partially altered to phyllosilicates, but wholesale leaching of cations by fluids did not occur.

Mittlefehldt, David W.↗
DOE OSTI2024

Applicability of 1D site response analysis to shallow sedimentary basins: A critical evaluation through physics-based 3D ground motion simulations

One-dimensional site response analysis (1D SRA) remains the standard practice in considering the effect of local soil deposits and predicting site-specific ground motions, although its range of applicability to realistic seismic wavefields is still in question. In this 1D approach, horizontal and vertical ground shaking are assumed to be induced by vertically propagating shear and compressional waves, respectively. A recent study based on analytical two-dimensional (2D) plane waves and simple point source earthquake simulations has shown two mechanistic limitations in this 1D modelling technique for general inclined seismic waves, that is, systematic over-prediction of the vertical motion and wave trapping in the 1D soil column. In this article, we evaluate in detail the applicability of this 1D modelling approach to realistic three-dimensional (3D) simulated seismic wavefields in shallow sedimentary basins. Linear-viscoelastic 1D SRA predictions using two types of input motions that are commonly used in practice—rock outcrop and in-column motions, are compared with the reference true site response results from 3D earthquake simulations in terms of various measures in the frequency and time domain. It is shown that the horizontal motion in the 3D seismic wavefield exhibits dominant shear wave propagation phenomenon, while the vertical motion is a combined effect of compressional and shear waves and can be over-predicted by the 1D approach when the incident seismic waves are inclined. Direct evidence of the wave refraction process that leads to the vertical motion over-prediction is provided. 1D SRA with in-column inputs can yield motions that have significantly longer duration compared to the true 3D site response solution due to trapped waves, casting in doubt the frequent need for increased soil damping in existing site studies to compensate for wave attenuation due to scattering alone. Sensitivity investigation on the increase of soil profile damping by a multiplier D mul shows D mul values compatible with those found in the literature for both horizontal and vertical motions. It is shown that the level of D mul optimized for a best match of the spectral acceleration is dependent on the characteristic of the input motion and a larger D mul is typically required for the vertical component. In contrast, 1D SRA with outcrop motions predicts motions with shorter significant duration due to its inability to capture the basin-edge generated surface waves. A suite of ground motion simulations was performed to assess the sensitivity of the observations to the basin geologic structure including the velocity gradient, rock-basin impedance contrast and basin depth. The analysis results show that the accuracy of the simplified 1D procedure is dependent on the wavefield composition of both the input motions and the true 3D site response solution. While the horizontal motions in shallow sedimentary basins can, to the first order, be reasonably captured by the simplified 1D approach, 1D SRA for the vertical component is in general not reliable and contributions from inclined shear waves should be accounted for in site-specific evaluation of the vertical design ground motion.

1D assumption↗
DOE OSTI2021

The Role of Stratigraphy and Loading History in Generating Complex Compaction Bands in Idealized Field-Scale Settings

The Buckskin Gulch locality in Utah is a landmark example of compaction localization. The outcrop of this locality involves distinct stratigraphic heterogeneity and was exposed to complex loading history. It features multiple sets of deformation bands with different kinematics and orientation. Similar formations were seen in the Valley of Fire, Nevada, and the Orange quarry, France, among other localities. The formation of such complex structures, their propagation mechanisms, and frequency is affected by numerous local and ambient factors whose impacts are not yet fully understood. The simulation of the above-mentioned localities is not feasible because of the limited amount of available information. This work, instead, investigates from a geomechanics standpoint how the interplay among material nonlinearity, outcrop stratigraphy, and loading history interconnects with specific spatiotemporal patterns of compaction band propagation. Our study shows that the system stratigraphy can be responsible for the emergence of coexisting compaction bands with different inclination and kinematics. Specifically, we show that stiffness contrasts induce nonlocal stress changes which may favor the initiation of secondary structures with different compaction localization characteristics. Furthermore, systems of inclined compaction bands induced by burial increase display secondary, noncontemporaneous sets of vertical compaction bands under the effects of postburial shortening. Our results indicate that stages of intermediate burial decrease prior to tectonic shortening can promote the formation of such complex systems. Despite the simplifications involved in our analyses, these findings show how geomechanics computations complement field observations and could provide a mechanics-based validation of site-specific reconstruction hypothesis.

58 GEOSCIENCES↗
DOE OSTI2020

The nature and origins of decametre-scale porosity in Ordovician carbonate rocks, Halahatang oilfield, Tarim Basin, China

At >7 km depths in the Tarim Basin, hydrocarbon reservoirs in Ordovician rocks of the Yijianfang Formation contain large cavities ( c . 10 m or more), vugs, fractures and porous fault rocks. Although some Yijianfang Formation outcrops contain shallow (formed near surface) palaeokarst features, cores from the Halahatang oilfield lack penetrative palaeokarst evidence. Outcrop palaeokarst cavities and opening-mode fractures are mostly mineral filled but some show evidence of secondary dissolution and fault rocks are locally highly ( c . 30%) porous. Cores contain textural evidence of repeated formation of dissolution cavities and subsequent filling by cement. Calcite isotopic analyses indicate depths between c . 220 and 2000 m. Correlation of core and image logs shows abundant cement-filled vugs associated with decametre-scale fractured zones with open cavities that host hydrocarbons. A Sm–Nd isochron age of 400 ± 37 Ma for fracture-filling fluorite indicates that cavities in core formed and were partially cemented prior to the Carboniferous, predating Permian oil emplacement. Repeated creation and filling of vugs, timing constraints and the association of vugs with large cavities suggest dissolution related to fractures and faults. In the current high-strain-rate regime, corroborated by velocity gradient tensor analysis of global positioning system (GPS) data, rapid horizontal extension could promote connection of porous and/or solution-enlarged fault rock, fractures and cavities. Supplementary material: Stable isotopic analyses and the velocity gradient tensor and principal direction and magnitude calculation are available at https://doi.org/10.6084/m9.figshare.c.4946046 Thematic collection: This article is part of the The Geology of Fractured Reservoirs collection available at: https://www.lyellcollection.org/cc/the-geology-of-fractured-reservoirs

Geology↗
DOE OSTI2019

Refined Lithostratigraphy of Upper and Middle Devonian Shales in West Virginia

The evolution of the formal lithostratigraphy for the Middle and Upper Devonian strata in the central Appalachian Basin has been complex. The original terminology (Chemung, Portage, Marcellus, Catskill, and others) was assigned in the latter 19th century. However, by the 1930s, the realization that these units changed in nature dramatically when traced laterally resulted in a crisis in stratigraphy that forced the differentiation of chronostratigraphy from lithostratigraphy. Further, the sheer size of the basin creates challenges, as stratigraphic terminology defined by examination along the outcrop belts at the basin margins is difficult to extend into the subsurface due to the distances involved, the different nature of outcrop and subsurface data, the different perspective of workers attempting to extend units either from the north and west or from the east, and the complex facies changes within the strata. As a result, the facies architecture and associated lithostratigraphic nomenclature for many Middle and Upper Devonian units remained unsettled, particularly in the basin center.

Boswell, Ray↗
DOE OSTI2018

A simple model of the effect of ocean ventilation on ocean heat uptake

Presentation includes slides on Earth System Models vs. Simple Climate Models; A Popular SCM: Energy Balance Model of Anomalies; On calibrating against one ESM experiment, the SCM correctly captures that ESM's surface warming response with other forcings; Multi-Model Analysis: Multiple ESMs, Single SCM; Posterior Distributions of ECS; However In Excess of 90% of TOA Energy Imbalance is Sequestered in the World Oceans; Heat Storage in the Two Layer Model; Heat Storage in the Two Layer Model; Including TOA Rad. Imbalance and Ocean Heat in Calibration Improves Repr., but Significant Errors Persist; Improved Vertical Resolution Does Not Fix Problem; A Series of Expts. Confirms That Anomaly-Diffusing Models Cannot Properly Represent Ocean Heat Uptake; Physics of the Thermocline; Outcropping Isopycnals and Horizontally-Averaged Layers; Local interactions between outcropping isopycnals leads to non-local interactions between horizontally-averaged layers; Both Surface Warming and Ocean Heat are Well Represented With Just 4 Layers; A Series of Expts. Confirms That When Non-Local Interactions are Allowed, the SCMs Can Represent Both Surface Warming and Ocean Heat Uptake; and Summary and Conclusions.

58 GEOSCIENCES↗