Search NASA⌕ Search

SEARCH · Search NASA

Results for “par”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Mercury and Radiocesium Accumulation and Associations With Sublethal Endpoints in the Florida Green Watersnake ( Nerodia floridana )

Mercury (Hg) and radiocesium ( 137 Cs) are well-known environmental contaminants with the potential to impact the health of humans and wildlife. Snakes have several characteristics conducive to studying environmental contamination but have rarely been included in the monitoring of polluted sites. We investigated the bioaccumulation of Hg and 137 Cs and associations with sublethal effects (standard metabolic rate [SMR] and hemoparasite infections) in Florida green watersnakes (Nerodia floridana). We captured 78 snakes from three former nuclear cooling reservoirs on the US Department of Energy's Savannah River Site in South Carolina (USA). For captured snakes, we (1) determined whole-body 137 Cs, (2) quantified total Hg (THg) using snake tail clips, (3) conducted hemoparasite counts, and (4) measured the SMR. We used multiple regression models to determine associations among snake body size, capture location, sex, tail THg, whole-body 137 Cs, Hepatozoon spp. prevalence and parasitemia, and SMR. Average whole-body 137 Cs (0.23 ± 0.08 Becquerels [Bq]/g; range: 0.00–1.02 Bq/g) was correlated with snake body size and differed significantly by capture site (Pond B: 0.67 ± 0.05 Bq/g; Par Pond: 0.10 ± 0.02 Bq/g; Pond 2: 0.03 ± 0.02 Bq/g). Tail THg (0.33 ± 0.03 mg/kg dry wt; range: 0.16–2.10 mg/kg) was significantly correlated with snake body size but did not differ by capture site. We found no clear relationship between SMR and contaminant burdens. However, models indicated that the prevalence of Hepatozoon spp. in snakes was inversely related to increasing whole-body 137 Cs burdens. Our results indicate the bioaccumulation of Hg and 137 Cs in N. floridana and further demonstrate the utility of aquatic snakes as bioindicators. Furthermore, our results also suggest a decrease in Hepatozoon spp. prevalence related to increased burdens of 137 Cs. Although the results are intriguing, further research is needed to understand the dynamics between 137 Cs and Hepatozoon spp. infections in semiaquatic snakes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Prediction of protein assemblies, the next frontier: The CASP14-CAPRI experiment

Here we present the results for CAPRI Round 50, the fourth joint CASP-CAPRI protein assembly prediction challenge. The Round comprised a total of twelve targets, including six dimers, three trimers, and three higher-order oligomers. Four of these were easy targets, for which good structural templates were available either for the full assembly, or for the main interfaces (of the higher-order oligomers). Eight were difficult targets for which only distantly related templates were found for the individual subunits. Twenty-five CAPRI groups including eight automatic servers submitted ~1250 models per target. Twenty groups including six servers participated in the CAPRI scoring challenge submitted ~190 models per target. The accuracy of the predicted models was evaluated using the classical CAPRI criteria. The prediction performance was measured by a weighted scoring scheme that takes into account the number of models of acceptable quality or higher submitted by each group as part of their five top-ranking models. Compared to the previous CASP-CAPRI challenge, top performing groups submitted such models for a larger fraction (70–75%) of the targets in this Round, but fewer of these models were of high accuracy. Scorer groups achieved stronger performance with more groups submitting correct models for 70–80% of the targets or achieving high accuracy predictions. Servers performed less well in general, except for the MDOCKPP and LZERD servers, who performed on par with human groups. In addition to these results, major advances in methodology are discussed, providing an informative overview of where the prediction of protein assemblies currently stands.

protein complexes↗
DOE OSTI2021

Evaluating causal‐based feature selection for fuel property prediction models

Abstract In‐silico screening of novel biofuel molecules based on chemical and fuel properties is a critical first step in the biofuel evaluation process due to the significant volumes of samples required for experimental testing, the destructive nature of engine tests, and the costs associated with bench‐scale synthesis of novel fuels. Predictive models are limited by training sets of few existing measurements, often containing similar classes of molecules that represent just a subset of the potential molecular fuel space. Software tools can be used to generate every possible molecular descriptor for use as input features, but most of these features are largely irrelevant and training models on datasets with higher dimensionality than size tends to yield poor predictive performance. Feature selection has been shown to improve machine learning models, but correlation‐based feature selection fails to provide scientific insight into the underlying mechanisms that determine structure–property relationships. The implementation of causal discovery in feature selection could potentially inform the biofuel design process while also improving model prediction accuracy and robustness to new data. In this study, we investigate the benefits causal‐based feature selection might have on both model performance and identification of key molecular substructures. We found that causal‐based feature selection performed on par with alternative filtration methods, and that a structural causal model provides valuable scientific insights into the relationships between molecular substructures and fuel properties.

Nguyen, Bernard↗
DOE OSTI2023

Multi-Functional Applications of H-Glass Embedded with Stable Plasmonic Gold Nanoislands

Metal nanoparticles (MNPs) are synthesized using various techniques on diverse substrates that significantly impact their properties. However, among the substrate materials investigated, the major challenge is the stability of MNPs due to their poor adhesion to the substrate. Herein, it is demonstrated how a newly developed H-glass can concurrently stabilize plasmonic gold nanoislands (GNIs) and offer multifunctional applications. The GNIs on the H-glass are synthesized using a simple yet, robust thermal dewetting process. The H-glass embedded with GNIs demonstrates versatility in its applications, such as i) acting as a room temperature chemiresistive gas sensor (70% response for NO 2 gas); ii) serving as substrates for surface-enhanced Raman spectroscopy for the identifications of Nile blue (dye) and picric acid (explosive) analytes down to nanomolar concentrations with enhancement factors of 4.8 × 10 6 and 6.1 × 10 5 , respectively; and iii) functioning as a nonlinear optical saturable absorber with a saturation intensity of 18.36 × 10 15 W m -2 at 600 nm, and the performance characteristics are on par with those of materials reported in the existing literature. In conclusion, this work establishes a facile strategy to develop advanced materials by depositing metal nanoislands on glass for various functional applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

NiFe Nanoparticle Nest Supported on Graphene as Electrocatalyst for Highly Efficient Oxygen Evolution Reaction

Abstract Designing cost‐efffective electrocatalysts for the oxygen evolution reaction (OER) holds significant importance in the progression of clean energy generation and efficient energy storage technologies, such as water splitting and rechargeable metal–air batteries. In this work, an OER electrocatalyst is developed using Ni and Fe precursors in combination with different proportions of graphene oxide. The catalyst synthesis involved a rapid reduction process, facilitated by adding sodium borohydride, which successfully formed NiFe nanoparticle nests on graphene support (NiFe NNG). The incorporation of graphene support enhances the catalytic activity, electron transferability, and electrical conductivity of the NiFe‐based catalyst. The NiFe NNG catalyst exhibits outstanding performance, characterized by a low overpotential of 292.3 mV and a Tafel slope of 48 mV dec −1 , achieved at a current density of 10 mA cm − 2 . Moreover, the catalyst exhibits remarkable stability over extended durations. The OER performance of NiFe NNG is on par with that of commercial IrO 2 in alkaline media. Such superb OER catalytic performance can be attributed to the synergistic effect between the NiFe nanoparticle nests and graphene, which arises from their large surface area and outstanding intrinsic catalytic activity. The excellent electrochemical properties of NiFe NNG hold great promise for further applications in energy storage and conversion devices.

Chemistry↗
DOE OSTI2024

Single Crystalline GeSe Van Der Waals Ribbons With Uniform Layer Stacking, High Carrier Mobility, and Adjustable Edge Morphology

Abstract Performance of the group IV monochalcogenide GeSe in solar cells, electronic, and optoelectronic devices is expected to improve when high‐quality single crystalline material is used rather than polycrystalline films. Crystalline flakes represent an attractive alternative to bulk single crystals as their synthesis may be developed to be scalable, faster, and with higher overall yield. However, large – and especially large and thin – single crystal flakes are notoriously hard to synthesize. Here it is demonstrated that vapor‐liquid‐solid growth combined with direct lateral vapor‐solid incorporation produces high‐quality single crystalline GeSe ribbons with tens of micrometers size and controllable thickness. Electron microscopy shows that the ribbons exhibit perfect equilibrium (AB) van der Waals stacking order without extended defects across the entire thickness, in contrast to the conventional case of substrate‐supported flakes where material is added via layer‐by‐layer nucleation and growth on the basal plane. Electrical measurements show anisotropic transport and a high Hall mobility of 85 cm 2 V −1 s −1 , on par with the best single crystals to date. Growth from mixed GeSe and SnSe vapors, finally, yields ribbons with unchanged structure and composition but with jagged edges, promising for applications that rely on ample chemically active edge sites, such as catalysis or photocatalysis.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2021

Wind power costs driven by innovation and experience with further reductions on the horizon

The costs of wind power have declined to levels on par with or below those of conventional sources in many parts of the world. Wind power has become one of the fastest-growing sources of new electricity generation. We take stock of wind power cost evolution over the past 20 years, review methodologies commonly used for cost assessment, discuss the potential for continued cost reduction, and identify anticipated cost and value drivers. Our scope includes both onshore and offshore wind technologies. We draw from a vast body of literature on these topics to highlight key trends, approaches, and limitations. Furthermore, we discuss strategies for wind power assets to enhance their marginal economic value to the broader power system and consumers. We identify a myriad of factors that are expected to influence the future cost and value of wind power, including siting, project scale, turbine size, operational synergies, commodity prices, advancements in turbine technologies, enhanced management of the wind resource, and novel control technologies that provide value for the electricity grid. Because the common methods for forecasting future costs each have their own strengths and weaknesses, we find the best insights are elicited from a combination of methods. Overall, researchers and analysts anticipate further sizable cost reductions for onshore and offshore wind. Midrange forecasts for levelized cost of energy in 2050 are generally between $20 and $30/MWh for onshore wind and $40 and $60/MWh for offshore wind, a reduction to approximately half of today's levels. Optimistic forecasts anticipate these levels as early as 2030.

17 WIND ENERGY↗
DOE OSTI2021

Strongly Interacting Matter Under Rotation: An Introduction

Ultrarelativistic collisions between heavy nuclei briefly generate the quark-gluon plasma (QGP), a new state of matter characterized by deconfined par- tons last seen microseconds after the Big Bang. The properties of the QGP are of intense interest, and a large community has developed over several decades, to pro- duce, measure and understand this primordial plasma. The plasma is now recog- nized to be a strongly-coupled fluid with remarkable properties, and hydrodynamics is commonly used to quantify and model the system. An important feature of any fluid is its vorticity, related to the local angular momentum density; however, this degree of freedom has received relatively little attention because no experimental signals of vorticity had been detected. Thanks to recent high-statistics datasets from experiments with precision tracking and complete kinemetic coverage at collider energies, hyperon spin polarization measurements have begun to uncover the vor- ticity of the QGP created at the Relativistic Heavy Ion Collider. The injection of this new degree of freedom into a relatively mature field of research represents an enormous opportunity to generate new insights into the physics of the QGP. The community has responded with enthusiasm, and this book (to be published as a volume of Lecture Notes in Physics series by Springer) represents some of the diverse lines of inquiry into aspects of strongly interacting matter under rotation

Becattini, Francesco↗
DOE OSTI2023

Shear Assisted Processing and Extrusion of Unhomogenized Aluminum Alloy 6063 Castings with High Iron Content

Shear Assisted Processing and Extrusion (ShAPE) was used to fabricate aluminum 6063 tubing directly from secondary scrap. Trimmings from an automotive manufacturing facility were cast into billets spiked with iron (0.3 wt% Fe) to explore the tolerance of ShAPE to Fe contamination. Billets were extruded in the unhomogenized condition to form tubing with an outer diameter of 12 mm and wall thickness of 2 mm. Tensile properties reached 0.2% YS = 206 MPa, UTS = 238 MPa, and U.E. = 16.3% in the T6 temper. Performance exceeds the ASTM minimum standard and is on par with ASM typical values for conventional extrusion of primary aluminum billets in the fully homogenized condition. Microstructural characterization shows extensive refinement of grain size along with dispersion and refinement of Fe-Al-Si intermetallic phases. This study suggests that ShAPE extrusion may offer a lower carbon manufacturing pathway through direct recycling of secondary aluminum scrap and elimination of the billet homogenization step.

solid phase processing, AA 6063, extrusion, Shear ↗
DOE OSTI2022

Impact of fully coherent energy loss on heavy meson production in pA collisions

Hadron production in proton-nucleus (pA) collisions was previously shown to be suppressed by medium-induced fully coherent energy loss (FCEL). We show that the quenching of D and B mesons in pPb collisions at the LHC due solely to FCEL is, at least, on par with other nuclear effects such as gluon shadowing or saturation. This is consistent with previous findings for both quarkonium and light hadron production in pA collisions, emphasising that FCEL effects need to be included for a reliable understanding of hadron production measurements in pA collisions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

A cornucopia of AdS5 vacua

We report on a systematic search for AdS 5 vacua corresponding to critical points of the potential in the five-dimensional $$ \mathcal{N} $$ N = 8 SO(6) gauged supergravity. By employing Google’s TensorFlow Machine Learning library, we find the total of 32 critical points including 5 previously known ones. All 27 new critical points are non-supersymmetric. We compute the mass spectra of scalar fluctuatons for all points and find that the non- supersymmetric AdS 5 vacua are perturbatively unstable. Many of the new critical points can be found analytically within consistent truncations of the $$ \mathcal{N} $$ N = 8 supergravity with respect to discrete subgroups of the S(O(6) × GL(2 , R)) symmetry of the potential. In par- ticular, we discuss in detail a $$ {\mathrm{\mathbb{Z}}}_2^3 $$ Z 2 3 -invariant truncation with 10 scalar fields and 15 critical points. We also compute explicitly the scalar potential in a $$ {\mathrm{\mathbb{Z}}}_2^2 $$ Z 2 2 -invariant extension of that truncation to 18 scalar fields and reproduce 17 of the 32 critical points from the numerical search. Finally, we show that the full potential as a function of 42 scalar fields can be studied analytically using the so-called solvable parametrization. In particular, we find that all critical points lie in a Z 2 -invariant subspace spanned by 22 scalar fields.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Integrating Aquatic Metabolism and Net Ecosystem CO2 Balance in Short- and Long-Hydroperiod Subtropical Freshwater Wetlands

Abstract How aquatic primary productivity influences the carbon (C) sequestering capacity of wetlands is uncertain. We evaluated the magnitude and variability in aquatic C dynamics and compared them to net ecosystem CO 2 exchange (NEE) and ecosystem respiration ( R eco ) rates within calcareous freshwater wetlands in Everglades National Park. We continuously recorded 30-min measurements of dissolved oxygen (DO), water level, water temperature ( T water ), and photosynthetically active radiation (PAR). These measurements were coupled with ecosystem CO 2 fluxes over 5 years (2012–2016) in a long-hydroperiod peat-rich, freshwater marsh and a short-hydroperiod, freshwater marl prairie. Daily net aquatic primary productivity (NAPP) rates indicated both wetlands were generally net heterotrophic. Gross aquatic primary productivity (GAPP) ranged from 0 to − 6.3 g C m −2 day −1 and aquatic respiration ( R Aq ) from 0 to 6.13 g C m −2 day −1 . Nonlinear interactions between water level, T water , and GAPP and R Aq resulted in high variability in NAPP that contributed to NEE. Net aquatic primary productivity accounted for 4–5% of the deviance explained in NEE rates. With respect to the flux magnitude, daily NAPP was a greater proportion of daily NEE at the long-hydroperiod site (mean = 95%) compared to the short-hydroperiod site (mean = 64%). Although we have confirmed the significant contribution of NAPP to NEE in both long- and short-hydroperiod freshwater wetlands, the decoupling of the aquatic and ecosystem fluxes could largely depend on emergent vegetation, the carbonate cycle, and the lateral C flux.

Malone, Sparkle L.↗
DOE OSTI2025

Field–potential finite-difference time-domain (FiPo FDTD) technique for computational electromagnetics

Modeling light–matter interactions at the nanoscale requires accurate handling of coupled quantum and electromagnetic systems. This coupling requires information about the electric scalar potential Φ and the magnetic vector potential A, which are not typically calculated in standard computational electromagnetics implementations. To that end, we have developed a field–potential finite-difference time-domain (FiPo FDTD) algorithm, which solves a set of first-order equations for Φ and A alongside equations for the electric and magnetic fields E and H. The FiPo Basic code is essentially conventional FDTD, but with an added module that calculates the potentials. The FiPo Hybrid code self-consistently calculates both fields and potentials and is particularly suitable for coupling with quantum electronic transport solvers because it can be sourced by the potentials themselves. To terminate the domain and mimic infinite space, we have derived and implemented a convolutional perfectly matched layer (CPML) absorbing boundary condition for FiPo FDTD whose performance is on par with state-of-the-art CPMLs for standard FDTD. We present FiPo simulation results on several example systems.

Avazpour, L. [University of Wisconsin-Madison, WI ↗
DOE OSTI2019

Network coding for improving throughput in WDM optical networks with dedicated protection

Network coding (NC) has been recently emerging as an excellent technique for leveraging network efficiency. In optical networks, NC and protection appear to be a good match and indeed, NC could be effectively exploited for greater protection efficiency thanks to the opportunity of combining signals rather than duplication in the traditional approach. Motivated by this observation, we investigate the application of a simple and practical NC technique based on XOR operation to improve the network throughput in survivable optical networks. To this end, we propose the NC-based protection whose speed recovery is on a par with the conventional 1+1 dedicated protection while the capacity usage could be more efficient, paving the way for improving throughput in constrained capacity conditions. A novel mixed integer linear programming model is developed for survivable optical networks design employing the proposed NC-based protection. The model attempts to optimally determine the demands to serve, the routing for served demands and NC assignment among demands aiming at maximizing the network throughput in the constraint of bandwidth limitation. Extensive numerical evaluations on realistic topologies are provided to highlight the advantages of our NC-based protection proposal compared with the conventional dedicated protection in improving the network throughput. Encouraging results are observed when the new protection proposal based on NC could accommodate up to 30% more traffic than the conventional case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Review of internal and external surface finishing technologies for additively manufactured metallic alloys components and new frontiers

Surface finishing in additive manufacturing (AM) is a technological bottleneck. The field of surface finishing of AM parts is vast because it not only focuses on roughness reduction in the hard-to-access internal surfaces but also includes the scope of adding coatings and sensors. Even though metal AM component is reaching the density and bulk microstructure at par or even better than conventionally produced components, adverse impact of surface roughness and imperfections is becoming the major obstruction. It is observed that external and internal surface roughness of AM components is a high probability cause of many unavoidable issues such as corrosion, incorrect tolerance estimations during the build stage, and the fatigue failure of parts before the expected life cycle. At present, AM field mainly focuses on improving and enhancing the internal and external surface roughness to pass the stringent qualification requirements for actual applications. To address these challenges, researchers worldwide are conducting many experiments and developing different surface finishing techniques. This paper reviews the state-of-the-art knowledge and processes of different surface finishing technology that can be applied to AM metal components. This article mainly highlights several liquid-based surfaces finishing approaches to develop promising surface microstructures on interior and exterior surfaces as a micromachining tool. The future of making strong and self-monitoring AM component requires broadening of surface finishing field and including advanced topics such as coatings and adding sensor technology. We also discuss new frontiers and the scope of future work in the surface finishing field to bring attention to related concerns and possibilities associated with making smart and strong AM components for twenty-first-century integrated engineering systems.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Adiabatic quantum support vector machines

Adiabatic quantum computers can solve difficult optimization problems (e.g., the quadratic unconstrained binary optimization problem), and they seem well suited to train machine learning models. In this paper, we describe an adiabatic quantum approach for training support vector machines. We show that the time complexity of our quantum approach is an order of magnitude better than the classical approach. Next, we compare the test accuracy of our quantum approach against a classical approach that uses the Scikit-learn library in Python across five benchmark datasets (Iris, Wisconsin Breast Cancer (WBC), Wine, Digits, and Lambeq). We show that our quantum approach obtains accuracies on par with the classical approach. Finally, we perform a scalability study in which we compute the total training times of the quantum approach and the classical approach with an increasing number of features and an increasing number of data points in the training dataset. In conclusion, our scalability results show that the quantum approach obtains a 3.5–4.5x speedup over the classical approach on datasets with many (millions of) features.

Computational Complexity↗
DOE OSTI2021

Progress of Nanotechnology for Lithium-Sulfur Batteries

Lithium-Sulfur (Li-S) battery has been proposed and investigated since the 1960s as an effective energy storage device via reversible electrochemical reactions. As the fast development and commercialization of Li-ion battery (LIB) technology kept moving forward, no breakthroughs have been attained to solve critical technical issues facing Li-S batteries during the following decades. In the year 2000s, Li-S batteries reattracted significant interests in the research field owing to their low-cost advantages, high theoretical specific energy of 2600 Wh kg -1 , which is at least 3 times higher than the current LIB technology. The low-cost and high abundance of sulfur (i.e., the cathode active material), make Li-S batteries more appealing than LIBs given the fact that the latter use critical materials such as cobalt and nickel in the manufacturing of the cathodes. Moreover, the high-energy and low-cost features make the Li-S battery a promising energy storage technology in practical applications such as portable devices, electric vehicles, and grid storage when coupled with the harvesting of solar or wind renewable energies. For example, since 2007, SION Power Corporation (Tucson, USA) and Oxis Energy (UK) made progress towards the commercialization of Li-S batteries with products showing specific energies over 350 Wh kg -1 for powering electric vehicles. To be on a par with the current LIB technology, the ultimate goal of achieving 500 Wh kg -1 for Li-S battery will make it more competitive for widespread commercialization.

Li, Mengya↗
DOE OSTI2025

Electroslag additive manufacturing: A pathway for high throughput near net shape production

Electroslag Additive Manufacturing (ESAM), a new high-throughput additive manufacturing (AM) method that combines Electroslag Strip Cladding (ESC) and wire arc AM (WAAM) is introduced. This combination enables the high deposition rate of ESC (more than 20 kg/h with a 60 mm strip electrode) to benefit from the precise geometric control of WAAM. As a precursor to ESAM, the ESC process is investigated in an AM context independently by evaluating both direct and staggered bead-stacking strategies and analyzing the microstructural and mechanical properties of each. This is followed by an ESAM demonstration producing an annular geometry by pairing ESC with gas tungsten arc welding (GTAW), wherein GTAW is utilized to construct annular walls that are subsequently infilled via ESC. The microstructure and mechanical properties of ESC-only AM are compared with that of the ESAM method and it is shown that printed integral retaining walls do not impact the resulting mechanical properties of ESAM. Furthermore, results indicate that ESAM-produced Alloy 625 parts exhibit tensile properties on par with cast counterparts, supporting the method’s scalability to components exceeding one metric ton, and possibly making ESAM a viable future manufacturing approach for competitive production of large-scale components currently manufactured by casting and forging.

Additive manufacturing↗