SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Preliminary results of rotational energy transfer in ground state OH in collisions in He are reported. A surprising propensity is found: conservation of total parity is favored in collisions which change in spin-orbit component, the reversible reaction 2Pi3/2 yields 2Pi1/2. This has implications concerning the OH-He potential surface.
Low density parity check (LDPC) codes with iterative decoding based on belief propagation achieve astonishing error performance close to Shannon limit. No algebraic or geometric method for constructing these codes has been reported and they are largely generated by computer search. As a result, encoding of long LDPC codes is in general very complex. This paper presents two classes of high rate LDPC codes whose constructions are based on finite Euclidean and projective geometries, respectively. These classes of codes a.re cyclic and have good constraint parameters and minimum distances. Cyclic structure adows the use of linear feedback shift registers for encoding. These finite geometry LDPC codes achieve very good error performance with either soft-decision iterative decoding based on belief propagation or Gallager's hard-decision bit flipping algorithm. These codes can be punctured or extended to obtain other good LDPC codes. A generalization of these codes is also presented.
Low Density Parity Check (LDPC) Codes provide near-Shannon Capacity performance for NASA Missions. These codes have high coding rates R=0.82 and 0.875 with moderate code lengths, n=4096 and 8176. Their decoders have inherently parallel structures which allows for high-speed implementation. Two codes based on Euclidean Geometry (EG) were selected for flight ASIC implementation. These codes are cyclic and quasi-cyclic in nature and therefore have a simple encoder structure. This results in power and size benefits. These codes also have a large minimum distance as much as d,,, = 65 giving them powerful error correcting capabilities and error floors less than lo- BER. This paper will present development of the LDPC flight encoder and decoder, its applications and status.
This presentation briefly discusses a research effort on mitigation techniques of pulsed radio frequency interference (RFI) on a Low-Density-Parity-Check (LDPC) code. This problem is of considerable interest in the context of providing reliable communications to the space vehicle which might suffer severe degradation due to pulsed RFI sources such as large radars. The LDPC code is one of modern forward-error-correction (FEC) codes which have the decoding performance to approach the Shannon Limit. The LDPC code studied here is the AR4JA (2048, 1024) code recommended by the Consultative Committee for Space Data Systems (CCSDS) and it has been chosen for some spacecraft design. Even though this code is designed as a powerful FEC code in the additive white Gaussian noise channel, simulation data and test results show that the performance of this LDPC decoder is severely degraded when exposed to the pulsed RFI specified in the spacecraft s transponder specifications. An analysis work (through modeling and simulation) has been conducted to evaluate the impact of the pulsed RFI and a few implemental techniques have been investigated to mitigate the pulsed RFI impact by reshuffling the soft-decision-data available at the input of the LDPC decoder. The simulation results show that the LDPC decoding performance of codeword error rate (CWER) under pulsed RFI can be improved up to four orders of magnitude through a simple soft-decision-data reshuffle scheme. This study reveals that an error floor of LDPC decoding performance appears around CWER=1E-4 when the proposed technique is applied to mitigate the pulsed RFI impact. The mechanism causing this error floor remains unknown, further investigation is necessary.
The Low Density Parity Check (LDPC) Code decoding algorithm make use of a scaled receive signal derived from maximizing the log-likelihood ratio of the received signal. The scaling factor (often called the combining ratio) in an AWGN channel is a ratio between signal amplitude and noise variance. Accurately estimating this ratio has shown as much as 0.6 dB decoding performance gain. This presentation briefly describes three methods for estimating the combining ratio: a Pilot-Guided estimation method, a Blind estimation method, and a Simulation-Based Look-Up table. The Pilot Guided Estimation method has shown that the maximum likelihood estimates of signal amplitude is the mean inner product of the received sequence and the known sequence, the attached synchronization marker (ASM) , and signal variance is the difference of the mean of the squared received sequence and the square of the signal amplitude. This method has the advantage of simplicity at the expense of latency since several frames worth of ASMs. The Blind estimation method s maximum likelihood estimator is the average of the product of the received signal with the hyperbolic tangent of the product combining ratio and the received signal. The root of this equation can be determined by an iterative binary search between 0 and 1 after normalizing the received sequence. This method has the benefit of requiring one frame of data to estimate the combining ratio which is good for faster changing channels compared to the previous method, however it is computationally expensive. The final method uses a look-up table based on prior simulated results to determine signal amplitude and noise variance. In this method the received mean signal strength is controlled to a constant soft decision value. The magnitude of the deviation is averaged over a predetermined number of samples. This value is referenced in a look up table to determine the combining ratio that prior simulation associated with the average magnitude of the deviation. This method is more complicated than the Pilot-Guided Method due to the gain control circuitry, but does not have the real-time computation complexity of the Blind Estimation method. Each of these methods can be used to provide an accurate estimation of the combining ratio, and the final selection of the estimation method depends on other design constraints.
In this work, we study the performance of structured Low-Density Parity-Check (LDPC) Codes together with bandwidth efficient modulations. We consider protograph-based LDPC codes that facilitate high-speed hardware implementations and have minimum distances that grow linearly with block sizes. We cover various higher- order modulations such as 8-PSK, 16-APSK, and 16-QAM. During demodulation, a demapper transforms the received in-phase and quadrature samples into reliability information that feeds the binary LDPC decoder. We will compare various low-complexity demappers and provide simulation results for assorted coded-modulation combinations on the additive white Gaussian noise and independent Rayleigh fading channels.
This paper reports the simulated performance of each of the nine accumulate-repeat-4-jagged-accumulate (AR4JA) low-density parity-check (LDPC) codes [3] when used in conjunction with binary phase-shift-keying (BPSK), quadrature PSK (QPSK), 8-PSK, 16-ary amplitude PSK (16- APSK), and 32-APSK.We also report the performance under various mappings of bits to modulation symbols, 16-APSK and 32-APSK ring scalings, log-likelihood ratio (LLR) approximations, and decoder variations. One of the simple and well-performing LLR approximations can be expressed in a general equation that applies to all of the modulation types.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
EuAuSb is a triangular-lattice Dirac semimetal in which a topological Hall effect has been observed to develop in association with a magnetically ordered phase. Our single-crystal neutron diffraction measurements have identified an incommensurate helical order in which individual ferromagnetic Eu 2+ layers rotate in-plane by ∼ 120° from one layer to the next. An in-plane magnetic field distorts the incommensurate order, eventually leading to a first order transition to a state that is approximately commensurate and that is continuously polarized as the bulk magnetization approaches saturation. From an analysis of the magnetic diffraction intensities versus field, we find evidence for a dip in the ordered in-plane moment at the same field where the topological Hall effect is a maximum, and we propose that this is due to field-induced quantum spin fluctuations. Our electronic structure calculations yield exchange constants compatible with the helical order and show that the bands near the Fermi level lose their spin degeneracy via a mechanism similar to that in the collinear altermagnets. In conclusion, we find that, unlike the even symmetry seen in the altermagnets, the spin splitting in EuAuSb has odd-wave symmetry similar to that recently found in a number of coplanar magnetic materials.
Not Available
In-beam γ-ray spectroscopy was used to study excited states of the neutron-deficient nucleus 37 K populated in fast-beam inelastic-scattering and proton-removal reactions at high-momentum loss. New γ-ray transitions and γγ coincidence relationships were established using the γ-ray tracking array GRETINA. The extension of the level scheme up to the first (13/2 – ) state highlights the potential of this recently demonstrated population pathway for studies of isospin symmetry involving mirror-energy differences. Furthermore, the nature of the newly identified states is discussed in comparison to shell-model calculations with the FSU cross-shell effective interaction. The calculated occupation numbers of individual orbitals are shown to offer a consistent explanation of the measured mirror-energy differences between 37 K and 37 Ar.
Not Available
We present the first constraints on multipole-dependent cosmic birefringence using CMB polarization data from the BK18 dataset, which combines observations from BICEP2, Array, and BICEP3 at frequencies of 95, 150, and 220 GHz. Photon coupling to an axionlike field leads to the rotation of CMB polarization, inducing nonzero cross-correlations. We show that a multipole-dependent rotation imprints a distinct signature in the polarization spectra that can be constrained. Specifically, we consider an early dark energy (EDE) scenario in which a pseudoscalar field couples to photons through a Chern-Simons interaction, generating a polarization rotation with multipole dependence. We introduce a phenomenological as a step function, obtaining constraints on the step function size consistent with zero, with uncertainties less than (68% CL). In addition, using multi-frequency , , and cross spectra, along with robust BICEP/ foreground treatment and likelihood framework, we derive constraints on the axion-photon coupling amplitude for several choices of EDE parameters. For the baseline best-fit value from the 2018 analysis, we obtain (68% CL), consistent with previous limits.
Explore the source record for details and available documents.
Explore the source record for details and available documents.