Search NASA⌕ Search

SEARCH · Search NASA

Results for “path”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

Machine Learning Based Path Planning for Improved Rover Navigation

Enhanced AutoNav (ENav), the baseline surface navigation software for NASA’s Perseverance rover, sorts a list of candidate paths for the rover to traverse, then uses the Approximate Clearance Evaluation (ACE) algorithm to evaluate whether the most highly ranked paths are safe. ACE is crucial for maintaining the safety of the rover, but is computationally expensive. If the most promising candidates in the list of paths are all found to be infeasible, ENav must continue to search the list and run time-consuming ACE evaluations until a feasible path is found. In this paper, we present two heuristics that, given a terrain heightmap around the rover, produce cost estimates that more effectively rank the candidate paths before ACE evaluation. The first heuristic uses Sobel operators and convolution to incorporate the cost of traversing high-gradient terrain. The second heuristic uses a machine learning (ML) model to predict areas that will be deemed untraversable by ACE. We used physics simulations to collect training data for the ML model and to run Monte Carlo trials to quantify navigation performance across a variety of terrains with various slopes and rock distributions. Compared to ENav's baseline performance, integrating the heuristics can lead to a significant reduction in ACE evaluations and average computation time per planning cycle, increase path efficiency, and maintain or improve the rate of successful traverses. This strategy of targeting specific bottlenecks with ML while maintaining the original ACE safety checks provides an example of how ML can be infused into planetary science missions and other safety-critical software.

Yue, Yisong↗

Optical path control in the MAM testbed

Future space-based optical interferometers will require control of the optical path delay to accomplish some or all of the three objectives: balancing the optical path in the two arms to within a tolerance corresponding to the coherence length of the star light being observed, modulating the optical path in order to observe the phase of the star light interference fringe, and modulating the path length in order to reduce the effect of cyclic errors in the laser metrology system used to measure the optical path length in the two arms of the interferometer.

optical interferometers optical path MAM testbed M↗

Algorithms and Sensors for Small Robot Path Following

Tracked mobile robots in the 20 kg size class are under development for applications in urban reconnaissance. For efficient deployment, it is desirable for teams of robots to be able to automatically execute path following behaviors, with one or more followers tracking the path taken by a leader. The key challenges to enabling such a capability are (l) to develop sensor packages for such small robots that can accurately determine the path of the leader and (2) to develop path following algorithms for the subsequent robots. To date, we have integrated gyros, accelerometers, compass/inclinometers, odometry, and differential GPS into an effective sensing package. This paper describes the sensor package, sensor processing algorithm, and path tracking algorithm we have developed for the leader/follower problem in small robots and shows the result of performance characterization of the system. We also document pragmatic lessons learned about design, construction, and electromagnetic interference issues particular to the performance of state sensors on small robots.

path following↗

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗

A High-Performance Computing GNSS-aware Path Planning Algorithm for Safe Urban Flight Operations

The emergence and development of advanced technologies and vehicle types have created a growing demand for new forms of flight operations. These new and increasingly complex operational paradigms, such as Advanced and Urban Air Mobility (AAM/UAM), present regulatory authorities and the aviation community with several design-and-implementation challenges – particularly for highly autonomous vehicles. An overarching and daunting task is to develop protocols that can integrate these operations without compromising safety or disrupting traditional airspace operations. A shift toward a more predictive, autonomous, risk mitigation capability becomes critical to meet this challenge. This paper proposes and evaluates a computationally-efficient path planning approach to perform pre-flight planning and autonomous in-flight re-routing to minimize exposures to selected hazards. In our evaluation, hazards associated with degraded and missing critical GPS navigation data are considered. In this paper, we first present a high-performance computing path planning approach based on an adapted Bellman-Ford algorithm, developed in the CUDA programming language. Using the adapted path planning algorithm, we test this algorithm when encountering issues with GPS quality, and deliver an implementation that can produce flight paths that minimize exposure to risks, while maintaining a low computational burden. In our evaluation, the computation of periodic and aperiodic path updates are evaluated, prioritizing specific events as triggers for updates, based on changes to satellite availability. These critical events can lead to significant exposure to navigational hazards if not dealt with correctly.

GNSS↗

A fixed-base simulation study of two STOL aircraft flying curved, descending instrument approach paths

A real-time, fixed-base simulation study has been conducted to determine the curved, descending approach paths (within passenger-comfort limits) that would be acceptable to pilots, the flight-director-system logic requirements for curved-flight-path guidance, and the paths which can be flown within proposed microwave landing system (MLS) coverage angles. Two STOL aircraft configurations were used in the study. Generally, no differences in the results between the two STOL configurations were found. The investigation showed that paths with a 1828.8 meter turn radius and a 1828.8 meter final-approach distance were acceptable without winds and with winds up to at least 15 knots for airspeeds from 75 to 100 knots. The altitude at roll-out from the final turn determined which final-approach distances were acceptable. Pilots preferred to have an initial straight leg of about 1 n. mi. after MLS guidance acquisition before turn intercept. The size of the azimuth coverage angle necessary to meet passenger and pilot criteria depends on the size of the turn angle: plus or minus 60 deg was adequate to cover all paths execpt ones with a 180 deg turn.

Benner, M. S.↗

The effects of random path fluctuations on the accuracy of laser ranging systems

The precision of satellite ranging systems, limited in part by atmospheric refraction and scattering, is examined. The effects of atmospheric turbulence on the accuracy of single color and multicolor ranging systems is discussed. The statistical characteristics of the random path length fluctuations induced by turbulence are examined. Correlation and structure functions are derived using several proposed models for the variations of the optical path length. For single color systems it is shown that the random path length fluctuations can limit the accuracy of a range measurement to a few centimeters. Two color systems can partially correct for the random path fluctuations so that in most cases their accuracy is limited to a few millimeters. However, at low elevation angles and over long horizontal paths two color systems can also have errors approaching a few centimeters.

Gardner, C. S.↗

The interplanetary scattering mean free path from 1 to 3 x 1000 MV

The paper reports a statistical study of published intensity-time profiles of proton and electron solar particle events from 1967 to 1974. The purpose of the study was to examine systematically the temporal and rigidity dependence of the interplanetary scattering mean free path from approximately 1000 to 3000 MV. The observed t-max, the time from release of particles at the sun to the time of maximum flux at the spacecraft, were interpreted in terms of a propagation model to obtain the average radial scattering mean-free path. This path (1) appears to be species independent when it is derived from proton and electron solar particle events, (2) varies less than a factor of 2 from solar maximum to solar minimum, and (3) is nearly rigidity independent below approximately 500 MV. The path values obtained at low rigidities are inconsistent with path values derived theoretically from the interplanetary magnetic field fluctuations.

Zwickl, R. D.↗

Analysis and Monte Carlo simulation of near-terminal aircraft flight paths

The flight paths of arriving and departing aircraft at an airport are stochastically represented. Radar data of the aircraft movements are used to decompose the flight paths into linear and curvilinear segments. Variables which describe the segments are derived, and the best fitting probability distributions of the variables, based on a sample of flight paths, are found. Conversely, given information on the probability distribution of the variables, generation of a random sample of flight paths in a Monte Carlo simulation is discussed. Actual flight paths at Dulles International Airport are analyzed and simulated.

Schiess, J. R.↗

Direct multiple path magnetospheric propagation - A fundamental property of nonducted VLF waves

An elongation of 20-200 ms, attributed to closely spaced multiple propagation paths between the satellite and the ground, is noted in well defined pulses observed by the ISEE 1 satellite in nonducted whistler mode signals from the Siple Station VLF transmitter. Electric field measurements show a 2 to 10 dB amplitude variation in the observed amplitude fading pattern which is also consistent with direct multiple path propagation. The results obtained for two cases, one outside and one inside the plasmapause, establish that the direct signals transmitted from the ground arrive almost simultaneously at any point in the magnetosphere along two or more closely spaced direct ray paths. It is also shown that multiple paths can be explained by assuming field-aligned irregularities, and the implications of these results for nonducted wave-particle interaction in the magnetosphere are discussed. For reasonable parameters of nonducted, multiple path propagation, a cyclotron-resonant electron will experience a wave Doppler broadening of a few tens to a few hundreds of Hz.

Sonwalkar, V. S.↗

A study of interior noise levels, noise sources and transmission paths in light aircraft

The interior noise levels and spectral characteristics of 18 single-and twin-engine propeller-driven light aircraft, and source-path diagnosis of a single-engine aircraft which was considered representative of a large part of the fleet were studied. The purpose of the flight surveys was to measure internal noise levels and identify principal noise sources and paths under a carefully controlled and standardized set of flight procedures. The diagnostic tests consisted of flights and ground tests in which various parts of the aircraft, such as engine mounts, the engine compartment, exhaust pipe, individual panels, and the wing strut were instrumented to determine source levels and transmission path strengths using the transfer function technique. Predominant source and path combinations are identified. Experimental techniques are described. Data, transfer function calculations to derive source-path contributions to the cabin acoustic environment, and implications of the findings for noise control design are analyzed.

Hayden, R. E.↗

Some path-following techniques for solution of nonlinear equations and comparison with parametric differentiation

Some path-following techniques are described and compared with other methods. Use of multipurpose techniques that can be used at more than one stage of the path-following computation results in a system that is relatively simple to understand, program, and use. Comparison of path-following methods with the method of parametric differentiation reveals definite advantages for the path-following methods. The fact that parametric differentiation has found a broader range of applications indicates that path-following methods have been underutilized.

Barger, R. L.↗

Cosmic-ray propagation in the Galaxy and in the heliosphere - The path-length distribution at low energy

The energy dependence of the path-length distribution of cosmic rays at low energies, below relativistic velocities, is studied, and its implications for models of cosmic-ray confinement and propagation in the Galaxy and Galactic halo, including the effects of a possible Galactic wind, are studied. It is found that the mean free path in Galactic propagation must be fully energy-dependent, with the mean of an exponential path-length distribution increasing with increasing energy below 1 GeV per nucleon and decreasing with increasing energy above 1 GeV per nucleon. This indicates that, at low energies, diffusion is not the controlling process. The path-length distribution is not purely exponential but is depleted in short path lengths at low energies. This depletion is energy-dependent, being largest at low energies and decreasing with increasing energy.

Garcia-Munoz, M.↗

Robot path planning with distance-safety criterion

A method for determining an optimal path with a weighted distance-safety criterion is developed. The goal is to strike a compromise between the shortest path and the centerline path, which is safer. The method is composed of three parts: (i) construction of a region map by dividing the workspace, (ii) interregion optimization to determine the entry and departure points of the path in each region, and (iii) intraregion optimization for determining the (optimal) path segment within each region. The region map is generated by using an approximate Voronoi diagram, and region optimization is achieved using variational dynamic programming. Although developed for 2-D problems, the method can be easily extended to a class of 3-D problems. Numerical examples are presented to demonstrate the method.

Suh, Suk-Hwan↗

Calculation of solar attenuation coefficient using ACCOS V along a critical scattering path

An appraisal of the optical properties of the AVHRR is made for a proposed orbital trajectory which results in an unexpected solar stray-light path; i.e., bypassing the external scan mirror and Cassegrain telescope and proceeding directly to the inner conical baffle. This stray-light path is directed onto an internal beamsplitter which, in turn, is directly observed by the detectors. Stray-light analysis, as a goal, seeks to remove or minimize the influence of such critical scattering paths. The AVHRR path is evaluated using a standard optical ray-tracing program, ACCOS V. To determine the expected sensor degradation, a calculation of the expected attenuation coefficient of scattered sunlight in the AVHRR sensor is estimated based on this important critical scattering path.

Ames, Alan J.↗

Optimal paths through downbursts

The control of an aircraft's takeoff path through a downburst is presently formulated as a dynamic optimization problem with minimum-altitude constraint and two different performance measures; a landing path through a downburst is also discussed. Paths are determined which, in addition to maximizing an airspeed/altitude combination immediately after downburst penetration, minimize deviation from the intended flight path. For mild-to-moderate downbursts, the performance strategy maintains altitude at the expense of airspeed loss, while the survival strategy involves a descent of the aircraft to the minimum altitude in order to obtain greater airspeed. For a severe downburst, both optimal paths maintain minimum altitude.

Zhao, Yiyuan↗

Processor Would Find Best Paths On Map

Proposed very-large-scale integrated (VLSI) circuit image-data processor finds path of least cost from specified origin to any destination on map. Cost of traversal assigned to each picture element of map. Path of least cost from originating picture element to every other picture element computed as path that preserves as much as possible of signal transmitted by originating picture element. Dedicated microprocessor at each picture element stores cost of traversal and performs its share of computations of paths of least cost. Least-cost-path problem occurs in research, military maneuvers, and in planning routes of vehicles.

Eberhardt, Silvio P.↗

Siphon flows in isolated magnetic flux tubes. III - The equilibrium path of the flux-tube arch

It is shown how to calculate the equilibrium path of a thin magnetic flux tube in a stratified, nonmagnetic atmosphere when the flux tube contains a steady siphon flow. The equilbrium path of a static thin flux tube in an infinite stratified atmosphere generally takes the form of a symmetric arch of finite width, with the flux tube becoming vertical at either end of the arch. A siphon flow within the flux tube increases the curvature of the arched equilibrium path in order that the net magnetic tension force can balance the inertial force of the flow, which tries to straighten the flux tube. Thus, a siphon flow reduces the width of the arched equilibrium path, with faster flows producing narrower arches. The effect of the siphon flow on the equilibrium path is generally greater for flux tubes of weaker magnetic field strength. Examples of the equilibrium are shown for both isothemal and adiabatic siphon flows in thin flux tubes in an isothermal external atmosphere.

Thomas, John H.↗