The plasma display - A digitally controllable, high brightness display with an inherent memory
Plasma display system characteristics and history, discussing gas discharge cell construction and behavioral mechanisms
Willson, R. H.↗
SEARCH · Search NASA
Results for “plasma control”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The reactive bed plasma system for contamination control
The contamination control capabilities of the Reactive Bed Plasma (RBP) system is described by delineating the results of toxic chemical composition studies, aerosol filtration work, and other testing. The RBP system has demonstrated its capabilities to decompose toxic materials and process hazardous aerosols. The post-treatment requirements for the reaction products have possible solutions. Although additional work is required to meet NASA requirements, the RBP may be able to meet contamination control problems aboard the Space Station.
Birmingham, Joseph G.↗
Micropulsed Plasma Thrusters for Attitude Control of a Low-Earth-Orbiting CubeSat
This study presents a 3-Unit CubeSat design with commercial-off-the-shelf hardware, Teflon-fueled micropulsed plasma thrusters, and an attitude determination and control approach. The micropulsed plasma thruster is sized by the impulse bit and pulse frequency required for continuous compensation of expected maximum disturbance torques at altitudes between 400 and 1000 km, as well as to perform stabilization of up to 20 deg /s and slew maneuvers of up to 180 deg. The study involves realistic power constraints anticipated on the 3-Unit CubeSat. Attitude estimation is implemented using the q method for static attitude determination of the quaternion using pairs of the spacecraft-sun and magnetic-field vectors. The quaternion estimate and the gyroscope measurements are used with an extended Kalman filter to obtain the attitude estimates. Proportional-derivative control algorithms use the static attitude estimates in order to calculate the torque required to compensate for the disturbance torques and to achieve specified stabilization and slewing maneuvers or combinations. The controller includes a thruster-allocation method, which determines the optimal utilization of the available thrusters and introduces redundancy in case of failure. Simulation results are presented for a 3-Unit CubeSat under detumbling, pointing, and pointing and spinning scenarios, as well as comparisons between the thruster-allocation and the paired-firing methods under thruster failure.
Gatsonis, Nikolaos A.↗
DBD Plasma Actuators for Flow Control in Air Vehicles and Jet Engines - Simulation of Flight Conditions in Test Chambers by Density Matching
Dielectric Barrier Discharge (DBD) Plasma actuators for active flow control in aircraft and jet engines need to be tested in the laboratory to characterize their performance at flight operating conditions. DBD plasma actuators generate a wall-jet electronically by creating weakly ionized plasma, therefore their performance is affected by gas discharge properties, which, in turn, depend on the pressure and temperature at the actuator placement location. Characterization of actuators is initially performed in a laboratory chamber without external flow. The pressure and temperature at the actuator flight operation conditions need to be simultaneously set in the chamber. A simplified approach is desired. It is assumed that the plasma discharge depends only on the gas density, while other temperature effects are assumed to be negligible. Therefore, tests can be performed at room temperature with chamber pressure set to yield the same density as in operating flight conditions. The needed chamber pressures are shown for altitude flight of an air vehicle and for jet engines at sea-level takeoff and altitude cruise conditions. Atmospheric flight conditions are calculated from standard atmosphere with and without shock waves. The engine data was obtained from four generic engine models; 300-, 150-, and 50-passenger (PAX) aircraft engines, and a military jet-fighter engine. The static and total pressure, temperature, and density distributions along the engine were calculated for sea-level takeoff and for altitude cruise conditions. The corresponding chamber pressures needed to test the actuators were calculated. The results show that, to simulate engine component flows at in-flight conditions, plasma actuator should be tested over a wide range of pressures. For the four model engines the range is from 12.4 to 0.03 atm, depending on the placement of the actuator in the engine. For example, if a DBD plasma actuator is to be placed at the compressor exit of a 300 PAX engine, it has to be tested at 12.4 atm for takeoff, and 6 atm for cruise conditions. If it is to be placed at the low-pressure turbine, it has to be tested at 0.5 and 0.2 atm, respectively. These results have implications for the feasibility and design of DBD plasma actuators for jet engine flow control applications. In addition, the distributions of unit Reynolds number, Mach number, and velocity along the engine are provided. The engine models are non-proprietary and this information can be used for evaluation of other types of actuators and for other purposes.
Ashpis, David E.↗
The physics of the cometary contact surface
The contact surface, which separates outflowing cometary plasma from solar wind controlled cometary plasma, is explained in terms of a balance between the magnetic pressure gradient force and ion-neutral drag. Giotto data indicate that the plasma pressure inside the contact surface cannot balance the sum of the external plasma and magnetic pressures, and therefore a Venus-like ionopause is not present at the contact surface. An expression for the magnetic field strength as a function of cometocentric distance is derived from the momentum equation. The theoretical magnetic field profile agrees quite well with the profile measured by the Giotto magnetometer in the vicinity of the contact surface.
Cravens, Thomas E.↗
Pulsed plasma accelerator operates repetitively without complex controls
Self-repeating pulsed plasma accelerator operates with a wide variety of gases over a large range of pressures without complex control equipment. The accelerator combines a circular channel with a tangential channel at the entrance way of a high-velocity gas.
Sabol, A. P.↗
Ion Temperature Control of the Io Plasma Torus
We report on observational and theoretical studies of ion temperature in the Io plasma torus. Ion temperature is a critical factor for two reasons. First, ions are a major supplier of energy to the torus electrons which power the intense EUV emissions. Second, ion temperature determines the vertical extent of plasma along field lines. Higher temperatures spread plasma out, lowers the density and slows reaction rates. The combined effects can play a controlling role in torus energetics and chemistry. An unexpected tool for the study of ion temperature is the longitudinal structure in the plasma torus which often manifests itself as periodic brightness variations. Opposite sides of the torus (especially magnetic longitudes 20 and 200 degrees) have been observed on numerous occasions to have dramatically different brightness, density, composition, ionization state, electron temperature and ion temperature. These asymmetries must ultimately be driven by different energy flows on the opposite sides, presenting an opportunity to observe key torus processes operating under different conditions. The most comprehensive dataset for the study of longitudinal variations was obtained by the Cassini UVIS instrument during its Jupiter flyby. Steffl (Ph.D. thesis, 2005) identified longitudinal variations in all the quantities listed above wit the exception of ion temperature. We extend his work by undertaking the first search for such variation in the UVIS dataset. We also report on a 'square centimeter' model of the torus which extend the traditional 'cubic centimeter' models by including the controlling effects of ion temperature more completely.
Delamere, P. A.↗
Impact of Solar Array Position on ISS Vehicle Charging
The International Space Station (ISS), because of its large structure and high voltage solar arrays, has a complex plasma interaction with the ionosphere in low Earth orbit (LEO). This interaction of the ISS US Segment photovoltaic (PV) power system with the LEO ionospheric plasma produces floating potentials on conducting elements of the ISS structure relative to the local plasma environment. To control the ISS floating potentials, two Plasma Contactor Units (PCUs) are installed on the Z1 truss. Each PCU discharges accumulated electrons from the Space Station structure, thus reducing the potential difference between the ISS structure and the surrounding charged plasma environment. Operations of the PCUs were intended to keep the ISS floating potential to 40 Volts (Reference 1). Exposed dielectric surfaces overlying conducting structure on the Space Station will collect an opposite charge from the ionosphere as the ISS charges. In theory, when an Extravehicular Activity (EVA) crewmember is tethered to structure via the crew safety tether or when metallic surfaces of the Extravehicular Mobility Unit (EMU) come in contact with conducting metallic surfaces of the ISS, the EMU conducting components, including the perspiration-soaked crewmember inside, can become charged to the Space Station floating potential. The concern is the potential dielectric breakdown of anodized aluminum surfaces on the EMU producing an arc from the EMU to the ambient plasma, or nearby ISS structure. If the EMU arcs, an electrical current of an unknown magnitude and duration may conduct through the EVA crewmember, producing an unacceptable condition. This electrical current may be sufficient to startle or fatally shock the EVA crewmember (Reference 2). Hence, as currently defined by the EVA community, the ISS floating potential for all nominal and contingency EVA worksites and translation paths must have a magnitude less than 40 volts relative to the local ionosphere at all times during EVA. Arcing from the EMU is classified as a catastrophic hazard, which requires two-failure tolerant controls, i.e., three hazard controls. Each PCU is capable of maintaining the ISS floating potential below the requirement during EVA. The two PCUs provide a single failure tolerant control of ISS floating potential. In the event of the failure of one or two PCUs, a combination of solar array shunting and turning the solar arrays into their own wakes will be used to supply control of the plasma hazard (Reference 3). The purpose of this paper is to present on-orbit information that shows that ISS solar array placement with respect to the ISS velocity vector can control solar array plasma charging, and hence, provide an operational control for the plasma hazard. Also, this paper will present on-orbit information that shows that shunting of the ISS solar arrays can control solar array plasma charging, and hence, provide an additional operational control for the plasma hazard.
Alred, John↗
Dielectric Barrier Discharge Plasma Actuator for Flow Control
This report is Part II of the final report of NASA Cooperative Agreement contract no. NNX07AC02A. It includes a Ph.D. dissertation. The period of performance was January 1, 2007 to December 31, 2010. Part I of the final report is the overview published as NASA/CR-2012- 217654. Asymmetric dielectric barrier discharge (DBD) plasma actuators driven by nanosecond pulses superimposed on dc bias voltage are studied experimentally. This produces non-self-sustained discharge: the plasma is generated by repetitive short pulses, and the pushing of the gas occurs primarily due to the bias voltage. The parameters of ionizing pulses and the driving bias voltage can be varied independently, which adds flexibility to control and optimization of the actuators performance. The approach consisted of three elements coupled together: the Schlieren technique, burst mode of plasma actuator operation, and 2-D numerical fluid modeling. During the experiments, it was found that DBD performance is severely limited by surface charge accumulation on the dielectric. Several ways to mitigate the surface charge were found: using a reversing DC bias potential, three-electrode configuration, slightly conductive dielectrics, and semi conductive coatings. Force balance measurements proved the effectiveness of the suggested configurations and advantages of the new voltage profile (pulses+bias) over the traditional sinusoidal one at relatively low voltages. In view of practical applications certain questions have been also addressed, such as electrodynamic effects which accompany scaling of the actuators to real size models, and environmental effects of ozone production by the plasma actuators.
Opaits, Dmitry, F.↗
Plasma current collection of Z-93 thermal control paint as measured in the Lewis Research Center's plasma interaction facility
A sample of Z-93 thermal control paint was exposed to a simulated space environment in a plasma chamber. The sample was biased through a series of voltages ranging from -100 volts to +300 volts and electron and ion currents were measured. Currents were found to be in the micro-ampere range indicating that the material remains a reasonably good insulator under plasma conditions. As a second step, the sample was left in the chamber for six days and retested. Collected currents were reduced by from two to five times from the previous values indicating a substantial loss of conductivity. As a final test, the sample was removed, exposed to room conditions for two days, and returned to the chamber. Current measurements showed that the sample had partially recovered the lost conductivity. In addition to presenting these results, this report documents all of the experimental data as well as the statistical analyses performed.
Hillard, G. Barry↗
Laser thermal propulsion
Laser thermal propulsion (LTP) is studied for the case in which laser power is absorbed by a small very high-temperature plasma (about 20,000 K) and transferred to the remainder of the pure hydrogen propellant by radiation and mixing. This concept could lead to the realization of a lightweight orbital transfer vehicle propulsion system having a specific impulse in the range 1000-2000 s. Approximately 12 percent of the input power may be radiated to the thruster walls, and 15 percent of the total propellant flow must be heated to 20,000 K to provide a bulk temperature of 5000 K prior to expansion. Three principal research issues identified are: (1) conditions for hydrogen plasma ignition, (2) control of the plasma position within the laser beam, plasma stability, and plasma absorption efficiency, and (3) characterization of the mixing of the plasma and buffer flows.
Keefer, D.↗
Working Group 5: Measurements technology and active experiments
Technology issues identified by working groups 5 are listed. (1) New instruments are needed to upgrade the ability to measure plasma properties in space. (2) Facilities should be developed for conducting a broad range of plasma experiments in space. (3) The ability to predict plasma weather within magnetospheres should be improved and a capability to modify plasma weather developed. (4) Methods of control of plasma spacecraft and spacecraft plasma interference should be upgraded. (5) The space station laboratory facilities should be designed with attention to problems of flexibility to allow for future growth. These issues are discussed.
Whipple, E.↗
Magnetic Flux Compression Experiments Using Plasma Armatures
Magnetic flux compression reaction chambers offer considerable promise for controlling the plasma flow associated with various micronuclear/chemical pulse propulsion and power schemes, primarily because they avoid thermalization with wall structures and permit multicycle operation modes. The major physical effects of concern are the diffusion of magnetic flux into the rapidly expanding plasma cloud and the development of Rayleigh-Taylor instabilities at the plasma surface, both of which can severely degrade reactor efficiency and lead to plasma-wall impact. A physical parameter of critical importance to these underlying magnetohydrodynamic (MHD) processes is the magnetic Reynolds number (R(sub m), the value of which depends upon the product of plasma electrical conductivity and velocity. Efficient flux compression requires R(sub m) less than 1, and a thorough understanding of MHD phenomena at high magnetic Reynolds numbers is essential to the reliable design and operation of practical reactors. As a means of improving this understanding, a simplified laboratory experiment has been constructed in which the plasma jet ejected from an ablative pulse plasma gun is used to investigate plasma armature interaction with magnetic fields. As a prelude to intensive study, exploratory experiments were carried out to quantify the magnetic Reynolds number characteristics of the plasma jet source. Jet velocity was deduced from time-of-flight measurements using optical probes, and electrical conductivity was measured using an inductive probing technique. Using air at 27-inHg vacuum, measured velocities approached 4.5 km/s and measured conductivities were in the range of 30 to 40 kS/m.
Turner, M. W.↗
Research in computer technology, spectrometry, control systems, vacuum instrumentation, plasma physics, superconductivity and related topics Progress report, Jun. - Aug. 1965
Research projects on surface and plasma physics, computer programming, information processing, superconductivity, ionospheric data, network synthesis and related fields
IONOSPHERE↗
The Dissipation Mechanism of Magnetic Reconnection
Magnetic reconnection is arguably the most efficient transport and energy conversion mechanism in almost ideal plasmas. Reconnection controls the overall dynamics in space and astrophysics plasmas, as well as in many laboratory plasma systems. Reconnection operates by means of a localized diffusion region, where deviations from the plasma idealness condition generate electric fields and permit plasma transport even far away from the diffusion region itself. Recent advances in analytic theory and computer modeling have begun to shed light on the internal dynamics of the diffusion region. In particular, we begin to understand the delicate nature of the force balance in the inner diffusion region, where particles can become unmagnetized and where electric field forces are important. This presentation will provide a brief introduction of the reconnection process and its applications. This introduction will be followed by a detailed analysis of the current understanding of dissipation region physics, and by an outlook toward future research.
Hesse, Michael↗
The Dissipation Mechanism of Magnetic Reconnection
Magnetic reconnection is arguably the most efficient transport and energy conversion mechanism in almost ideal plasmas. Reconnection controls the overall dynamics in space and astrophysics plasmas, as well as in many laboratory plasma systems. Reconnection operates by means of a localized diffusion region, where deviations from the plasma idealness condition generate electric fields and permit plasma transport even far away from the diffusion region itself. Recent advances in analytic theory and computer modeling have begun to shed light on the internal dynamics of the diffusion region. In particular, we begin to understand the delicate nature of the force balance in the inner diffusion region, where particles can become unmagnetized and where electric field forces are important. This presentation will provide a brief introduction of the reconnection process and its applications. This introduction will be followed by a detailed analysis of the current understanding of dissipation region physics, and by an outlook toward future research.
Hesse, Michael↗
The Inner Workings of Magnetic Reconnection
Magnetic reconnection is arguably the most efficient transport and energy conversion mechanism in almost ideal plasmas. Reconnection controls the overall dynamics in space and astrophysics plasmas, as well as in many laboratory plasma systems. Reconnection operates by means of a localized diffusion region, where deviations from the plasma idealness condition generate electric fields and permit plasma transport even far away from the diffusion region itself. Recent advances in analytic theory and computer modeling have begun to shed light on the internal dynamics of the diffusion region. In particular, we begin to understand the delicate nature of the force balance in the inner diffusion region, where particles can become unmagnetized and where electric field forces are important. This presentation will provide a brief introduction of the reconnection process and its applications. This introduction will be followed by a detailed analysis of the current understanding of dissipation region physics, and by an outlook toward future research.
Hesse, Michael↗
Development and Application of Plasma Actuators for Active Control of High-Speed and High Reynolds Number Flows
Active flow control is often used to manipulate flow instabilities to achieve a desired goal (e.g. prevent separation, enhance mixing, reduce noise, etc.). Instability frequencies normally scale with flow velocity scale and inversely with flow length scale (U/l). In a laboratory setting for such flow experiments, U is high, but l is low, resulting in high instability frequency. In addition, high momentum and high background noise & turbulence in the flow necessitate high amplitude actuation. Developing a high amplitude and high frequency actuator is a major challenge. Ironically, these requirements ease up in application (but other issues arise).
Sammy, Mo↗