Search NASA⌕ Search

SEARCH · Search NASA

Results for “plasma modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2012

Inductive Pulsed Plasma Thruster Model with Time-Evolution of Energy and State Properties

A model for pulsed inductive plasma acceleration is presented that consists of a set of circuit equations coupled to both a one-dimensional equation of motion and an equation governing the partitioning of energy. The latter two equations are obtained for the plasma current sheet by treating it as a single element of finite volume and integrating the governing equations over that volume. The integrated terms are replaced where necessary by physically-equivalent quantities that are calculated through the solution of other parts of the governing equation set. The model improves upon previous one-dimensional performance models by permitting the time-evolution of the energy and state properties of the plasma, the latter allowing for the tailoring of the model to different gases that may be chosen as propellants. The time evolution of the various energy modes in the system and the associated plasma properties, calculated for argon propellant, are presented to demonstrate the efficacy of the model. The model produces a result where efficiency is maximized at a given value of the electrodynamic scaling term known as the dynamic impedance parameter. Qualitatively and quantitatively, the model compares favorably with performance measured for two separate inductive pulsed plasma thrusters, with disagreements attributable to simplifying assumptions employed in the generation of the model solution.

Polzin, Kurt A.↗
NASA NTRS2004

ISS Plasma Interaction: Measurements and Modeling

Ionospheric plasma interaction effects on the International Space Station are discussed in the following paper. The large structure and high voltage arrays of the ISS represent a complex system interacting with LEO plasma. Discharge current measurements made by the Plasma Contactor Units and potential measurements made by the Floating Potential Probe delineate charging and magnetic induction effects on the ISS. Based on theoretical and physical understanding of the interaction phenomena, a model of ISS plasma interaction has been developed. The model includes magnetic induction effects, interaction of the high voltage solar arrays with ionospheric plasma, and accounts for other conductive areas on the ISS. Based on these phenomena, the Plasma Interaction Model has been developed. Limited verification of the model has been performed by comparison of Floating Potential Probe measurement data to simulations. The ISS plasma interaction model will be further tested and verified as measurements from the Floating Potential Measurement Unit become available, and construction of the ISS continues.

Barsamian, H.↗
NASA NTRS1994

ASCA observations of SS Cygni during an anomalous outburst

SS Cygni was observed by the ASCA satellite on 1993 May 27, the first cataclysmic variable studied by ASCA. The observations were conducted while the system was in an outburst of the 'anomalous' variety. The SIS spectrum cannot be explained by two-temperature Raymond-Smith coronal plasma models as invoked in previous studies with lower spectral resolution. Significantly better agreement is found for models with plasma emission at kT = 0.8, 3.5 keV and thermal bremsstrahlung at kT = 18 keV. The gas imaging spectrometer (GIS) data are consistent with the solid state imaging spectrometer (SIS) data, showing evidence for Fe line emission but showing no evidence of pulsation over times ranging from seconds to minutes. These observations seem at variance with standard theory in two regards: we simultaneously see hard X-rays and optically thin soft X-rays while the system is in outburst, and we see a nonsmooth emission measure distribution. We speculate on possible scenarios which might resolve these differences.

Nousek, John A.↗
NASA NTRS2003

Low Earth Orbit Plasma Variability Model

The empirical International Reference Ionosphere is a widely used model for estimating low Earth orbit plasma characteristics for use in spacecraft design and mission analysis. The climatological model provides mean values of plasma density, temperature, composition, and other ionospheric parameters that can be used to estimate the average magnitude of spacecraft charging, current collection for electrodynamic tethers, and other effects on spacecraft design. Mean IRI parameters are not adequate to answer questions such as what is the maximum or minimum value of the spacecraft potential, does the maximum spacecraft potential exceed a program requirement, will an electrodynamic tether provide adequate drag to deorbit a satellite at end of life, and will the tether provide sufficient thrust to reboost a spacecraft at any time in the solar cycle. These questions require estimates of the variability of the ionospheric environment about the mean values. This presentation describes the status of work at MSFC to develop an empirical ionospheric variability model that can be used in conjunction with the climatological IRI model to provide both mean ionospheric parameters and variations of the environment about the mean. Our technique will use an extensive database of satellite and radar observations of the electron density and temperature to derive variances of the data about the model values. The variances will then be incorporated into Fortran wrapper software that calls the IRI-2001 model and provides statistical estimates of the deviation of the environment about the mean IRI values. We will provide an update on the state of the database development and provide examples of analysis and modeling efforts completed specifically for an International Space Station application.

Minow, Joseph I.↗
NASA NTRS2019

Pulsed Plasma Acceleration Modeling in Detonation and Deflagration Modes

Gas-fed electromagnetic pulsed plasma accelerators discharge electrical energy into a gas to ionize and electromagnetically accelerate propellant in the domain. Efforts to model pulsed accelerators have either assumed that the discharge is short and completely transient, accelerating the gas by entraining it in a moving current sheet, or that the discharge is relatively long, establishing a stable quasi-steady current distribution pattern that accelerates a plasma flowing through it. There have been pulsed plasma accelerator tests that appear to fit somewhere between these two bounds, exhibiting some properties that are associated with the purely transient devices while also showing others that are associated with quasi-steady-state plasma acceleration. A model is presented based upon the premise that all pulsed plasma accelerators first form an accelerating current sheet (detonation mode accelerator). Depending upon the pulse length and the gas conditions in the dis- charge channel, the plasma sheet may reach the end of the accelerator before the discharge has completed a full half-cycle, wherein the proposed model transitions to a quasi-steady description of the acceleration process (deflagration mode accelerator). A review of the entire model is presented, highlighting improvements and upgrades implemented to aid in the stability of the numerical scheme used to model the gas flow in the channel and an improved treatment of current sheet mass shedding, which adds gas to the wake of the sheet. The assumptions employed to model the transition from detonation to deflagration mode are presented and used to generate solutions to the governing equations. The modeling of the deflagration-mode under the present assumptions results in very low deflagration impulse bits relative to those obtained at the end of the detonation mode, implying that the present assumptions and modeling of the deflagration mode may not represent a fruitful approach.

Polzin, Kurt A.↗
NASA NTRS2019

Pulsed Plasma Acceleration Modeling in Detonation and Deflagration Modes

Gas-fed electromagnetic pulsed plasma accelerators discharge electrical energy into a gas to ionize and electromagnetically accelerate propellant in the domain. Efforts to model pulsed accelerators have either assumed that the discharge is short and completely tran- sient, accelerating the gas by entraining it in a moving current sheet, or that the discharge is relatively long, establishing a stable quasi-steady current distribution pattern that accel- erates a plasma flowing through it. There have been pulsed plasma accelerator tests that appear to fit somewhere between these two bounds, exhibiting some properties that are associated with the purely transient devices while also showing others that are associated with quasi-steady-state plasma acceleration. A model is presented based upon the premise that all pulsed plasma accelerators first form an accelerating current sheet (detonation mode accelerator). Depending upon the pulse length and the gas conditions in the dis- charge channel, the plasma sheet may reach the end of the accelerator before the discharge has completed a full half-cycle, wherein the proposed model transitions to a quasi-steady description of the acceleration process (deflagration mode accelerator). A review of the entire model is presented, highlighting improvements and upgrades implemented to aid in the stability of the numerical scheme used to model the gas flow in the channel and an im- proved treatment of current sheet mass shedding, which adds gas to the wake of the sheet. The assumptions employed to model the transition from detonation to deflagration mode are presented and used to generate solutions to the governing equations. The modeling of the deflagration-mode under the present assumptions results in very low deflagration im- pulse bits relative to those obtained at the end of the detonation mode, implying that the present assumptions and modeling of the deflagration mode may not represent a fruitful approach.

Polzin, Kurt A.↗
NASA NTRS1990

Plasma contactor modeling with NASCAP/LEO - Extending laboratory results to space systems

In the laboratory, hollow cathode-based plasma contactors have been observed to both emit and collect ampere-level electron currents with low impedance. The laboratory behavior of hollow cathode-based plasma contactors and the limited space experience with hollow cathodes suggest that, for many applications, a hollow cathode-based plasma contactor is the ideal device to provide electrical connection with the space plasma. In order to confidently extend the laboratory experience to the low-earth-orbit environment, a series of plasma contactor computer models has been developed. Calculations show that a hollow cathode plasma contactor that collects 0.5 A in the laboratory will only collect 2.4 mA in space. The simplest way to boost the collected current is to increase the gas flow. A mole of gas is enough to collect ampere level currents for 5-1/2 hours.

Davis, V. A.↗
NASA NTRS1988

Constraints on the neutral hydrogen corona at Uranus from its interaction with magnetospheric plasma

Models of collisional reactions between the hot (several keV) protons and neutral atomic hydrogen corona observed at Uranus by Voyager 2 are compared with observations in order to deduce constraints on the coronal density. An upper limit is found for n sub H (5R sub U) of several tens of H/cu cm on the sunward side of Uranus and several H/cu cm on the dark side. The possibility that the hot plasma population might arise from photoionization and electron impact ionization of coronal and interstellar medium hydrogen in the magnetotail, followed by pickup and energization while convecting toward Uranus, is examined and rejected.

Herbert, Floyd↗
NASA NTRS2000

IMAGE EUV Observations and Modeling of the Plasmaspheric Density Trough Associated with the 24 May 2000 Geomagnetic Storm

The IMAGE EUV imager observed a plasmaspheric density trough in association with a geomagnetically active period on 24 May 2000. At EUV wavelengths, this density trough appeared as an Archimedes spiral extending from Earth's shadow to approximately 1800 MLT. We present an analysis of this density trough using simulated EUV images. Observational EUV images are subjected to edge analysis to establish the plasmapause L-shell and the location of the density trough in terms of L-shell, MLT extent, and radial width. The plasmaspheric density distribution is modeled using both static and dynamic models for the plasmasphere. The background plasmasphere is then numerically simulated using the 4-parameter plasmaspheric density model contained within the Global Core Plasma Model (GCPM) [Gallagher et al., 20001 and the Dynamic Global Core Plasma Model (DGCPM). Simulated EUV images of the model plasmasphere are produced once an artificial density depletion, matching the observed MLT extent and width, has been removed. Once the azimuthal extent and width of the trough have been simulated, the depth of the artificial density depletion is iteratively adjusted to produce simulated EUV images that approximate observation. The results of this analysis and discussion of possible origins for this density trough will be presented.

Adrian, M.L.↗
NASA NTRS1990

A two-dimensional model of plasma expansion in the ionosphere

A systematic parameter study is conducted of the motion of artificial plasma clouds across the geomagnetic field at ionospheric altitudes. The study is based on a two-dimensional numerical model. Taken into consideration are the effects solar cycle variations on the cloud evolution, as well as the effects of seasonal and geomagnetic activity conditions, and variations in the ionospheric release conditions. The effects of magnetospheric electric fields and thermospheric winds are also considered. The plasma cloud model and related assumptions are discussed, and numerical results are presented.

Ma, T.-Z.↗
NASA NTRS1988

The kinetic approach in magnetospheric plasma transport modeling

The need for a kinetic approach in magnetospheric plasma transport problems is reviewed, as are the trends in its recent applications. The need for kinetic modeling is particularly obvious when confronted with the astonishing variety of magnetospheric particle measurements that display compelling energy and pitch angle-related spatial and/or temporal dispersion, and various types of highly non-Maxwellian features in the distribution functions. Global problems in which the kinetic approach has recently been applied include solar wind plasma injection and dispersion over the cusp, substorm particle injection near synchronous orbit, synergistic energization of ionospheric ions into ring current populations by waves and induced electric field-driven convection, and ionospheric outflow from restricted source regions into the magnetosphere. Kinetic modeling can include efforts ranging from test-particle techniques to particle-in-cell studies, and this range is considered here. There are some areas where fluid and kinetic approaches have been combined or patched together, and these will be briefly discussed.

Horwitz, J. L.↗
NASA NTRS2010

Recent Simulation Results on Ring Current Dynamics Using the Comprehensive Ring Current Model

Plasma sheet conditions and electromagnetic field configurations are both crucial in determining ring current evolution and connection to the ionosphere. In this presentation, we investigate how different conditions of plasma sheet distribution affect ring current properties. Results include comparative studies in 1) varying the radial distance of the plasma sheet boundary; 2) varying local time distribution of the source population; 3) varying the source spectra. Our results show that a source located farther away leads to a stronger ring current than a source that is closer to the Earth. Local time distribution of the source plays an important role in determining both the radial and azimuthal (local time) location of the ring current peak pressure. We found that post-midnight source locations generally lead to a stronger ring current. This finding is in agreement with Lavraud et al.. However, our results do not exhibit any simple dependence of the local time distribution of the peak ring current (within the lower energy range) on the local time distribution of the source, as suggested by Lavraud et al. [2008]. In addition, we will show how different specifications of the magnetic field in the simulation domain affect ring current dynamics in reference to the 20 November 2007 storm, which include initial results on coupling the CRCM with a three-dimensional (3-D) plasma force balance code to achieve self-consistency in the magnetic field.

Zheng, Yihua↗
NASA NTRS1981

Fluid model of plasma outside a hollow cathode neutralizer

The present study analyzes the capability of a fluid model of electron transport to explain observed properties of the external plasma of a hollow cathode neutralizer used to neutralize beams emerging from ion thrusters. Calculations reported here show that when the effective collision frequency in such a model is near the plasma frequency, the resulting electric potential and electron temperature variations are in qualitative agreement with values measured in the plume mode of the hollow cathode. Both theory and experiment show strong variations of temperature and potential within a few centimeters of the cathode orifice.

Parks, D. E.↗
NASA NTRS2023

The Gamma-Ray Pulsar Phenomenology in View of 3D Kinetic Global Magnetosphere Models

We develop kinetic plasma models of pulsar magnetospheres with magnetic-field-line-dependent plasma injection that reveal the importance of various magnetosphere regions in regulating the gamma-ray emission. We set different particle injection rates for the so-called open, closed, and separatrix zones. Moderate particle injection rates in open and closed zones ensure a global field structure close to the force-free one, while the dissipation occurs mainly in and around the equatorial current sheet. The particles injected in the separatrix zone affect the particle populations that enter the equatorial current sheet region and, therefore, the corresponding accelerating electric fields, particle energies, the spectral cutoff energy, and gamma-ray efficiency. The separatrix zone models reproduce the recently discovered fundamental plane of gamma-ray pulsars consistent with curvature radiation emission, the gamma-ray light-curve shapes, and the radio-lag vs. peak-separation correlation reported in the Fermi second pulsar catalog. The model beaming factors indicate that the pulsar total gamma-ray luminosities listed in the Fermi catalogs are overestimations of the actual ones. We find that the radiation reaction limited regime starts ceasing to govern the high-energy emission for spin-down powers less than 1034 erg/s. Our results also indicate that toward high magnetic inclination angles, the "Y point" around the rotational equator migrates well inside the light cylinder sparking additional peaks in the gamma-ray pulse profiles. We find that an equivalent enhanced particle injection beyond the Y point strengthens these features making the model gamma-ray light curves inconsistent with those observed.

Neutron stars↗
NASA NTRS1988

Comment on 'Generation of broadband noise in the magnetotail by the beam acoustic instability' by P.B. Dusenbery

It is shown here that of the three plasma models for the generation of broadband noise in the magnetotail proposed by Dusenbery and Lyons (1985), two result in the same types of instabilities that are also excited in the Grabbe and Eastman (GE, 1984) model, while the third model introduces other modes not present in the GE model. For the plasma parameters given in the GE model, the ion/ion acoustic instability is a nonresonant one, even though the phase velocity of the excited waves falls within the distribution function of the core ions. The nonlinear saturation mechanism of the ion/ion acoustic instability is the trapping of both the core and the beam ions. In a reply, Dusenbery addresses several ongoing controversies which have resulted from studies of wave particle interactions in the plasma sheet boundary layer.

Omidi, N.↗