Search NASA⌕ Search

SEARCH · Search NASA

Results for “plastics biodegradation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The Significance of Environmental Attributes as Indicators of the Life Cycle Environmental Impacts of Packaging and Food Service Ware

The environmental impacts of packaging and food service ware (FSW) are increasingly the subject of government policy, public discourse, and industry commitments. While some consideration is given to reducing the impacts of packaging across its entire life cycle, most of the focus is on packaging waste or feedstock substitution. Efforts typically focus on specific packaging characteristics, or material attributes, commonly perceived to be environmentally preferable. This article summarizes an extensive meta-review of existing published literature that was performed to determine whether the material attributes recyclability, recycled content, compostability, and biobased, commonly considered to be environmentally beneficial, correlate with lower net environmental impacts across the full life cycle of the packaging and FSW. Seventy-one unique life cycle assessment (LCA) studies that quantify the environmental impacts throughout the entire life cycle of packaging and FSW were analyzed. These studies included over 5000 comparisons for 13 impact categories commonly analyzed in LCA studies. The results from the meta-review identified a number of instances where material attributes do not correlate with environmental benefits for packaging and FSW. Rather, other characteristics such as material choice or mass of the packaging/FSW products can have higher influence in determining life cycle impacts.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Earthworms Exposed to Polyethylene and Biodegradable Microplastics in Soil: Microplastic Characterization and Microbial Community Analysis

While much is known about microplastics in aquatic environments, only few studies have focused on how microplastics interact with terrestrial organisms. The objective of our study was to investigate the interactions of earthworms with microplastics in a natural environment with environmentally realistic plastic concentrations. Here we investigated whether earthworms would ingest microplastics and incorporate them into their bodies and cast, and whether microplastics would alter the intestinal and soil microbiome. Lumbricus terrestris was exposed to two types of mi croplastics, biodegradable polybutylene adipate terephthalate (PBAT) and low-density polyethylene (LDPE) in mesocosoms filled with natural soil. Microplastics were mixed with poplar leaves and earthworms were allowed to forage for food for 20 days. Surface and bulk soil, earthworm cast, and earthworms themselves were sampled and analyzed for plastic content and microbial communities. Earthworms did not show macroscopic health deterioration (weight loss, vitality). We observed microplastics particles in earthworm casts and guts. Raman spectroscopy indicated that PBAT in guts and cast had degraded to some extent; however, LDPE remained unchanged among the different samples. Microbial analysis showed that soil and casts has similar microbial communities; however, they were signicantly different from the guts samples. Microplastic treatments did not result in a statistically signicant change in bacterial richness, diversity or community composition compared to controls. Taken together, our results suggest that, at environmentally realistic concentrations and short exposure times, PBAT and LDPE microplastics do not have adverse effects on Lumbricus terrestris earthworms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Sustainable Polymer for Polyolefin Replacement (CRADA Final Report)

Sustainable Chemicals, LLC (Participant, Sust-Chem) develops renewable, biodegradable bioplastics for the replacement of large-volume petrochemical plastics such as polyethylene (PE) and polypropylene (PP). Participant’s patented bioplastics will find use in everyday items such as plastic bags, flexible containers, packaging, and toys and will address customers' ask for goods that are sustainable but don't cost a premium. Participants’ plastic comes from plant biomass and at the end of its lifecycle, is compostable or chemically recyclable. During the CRADA, Participant and Contractor will jointly refine the polymerization process used to make our bioplastic. Participant and Contractor will focus on technologies that are economically and industrially feasible, complete with full polymer characterization.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Soil Sensors in Agriculture: From Unsustainable to Biodegradable

Commercially available bi-metallic temperature sensors have long exploited differential thermal expansions between materials to produce an actuation-induced readout from a bi-metal helix. When dispersed in agricultural land, electronic components are used to transmit information at the cost of an increased environmental footprint. This paper briefly recaps the proposed sensor, which employs a biodegradable bi-material helix composed of a polymer and metal. Proposed polymer sheetings of cellulose acetate and polylactic acid are characterized via TGA, DMA, and DSC to evaluate plasticizer content, shrinkage, and an appropriate sensor work-use range. Finally, the deflection of non-biodegradable bi-polymer strips is quantified for various combinations to determine if bi-polymer deflection is possible.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Molecular dynamics simulations for glass transition temperature predictions of polyhydroxyalkanoate biopolymers

Polyhydroxyalkanoates (PHAs) represent an emerging class of biosynthetic and biodegradable polyesters that exhibit considerable potential to replace petroleum-based plastics towards a sustainable future. Despite the promise, general structure–property mappings within this class of polymers remain largely unexplored. An efficient exploration of this vast chemical space calls for the development and validation of predictive methods for accurate estimation of a diverse range of properties for PHA-based polymers. Towards this aim, we present and validate in this work the results of our molecular dynamics (MD) simulation based approach aimed at predicting glass transition temperatures (T g ) of PHA-based polymers. Since generally available and widely used polymer forcefields exhibit a relatively poor performance for T g predictions, we have developed a new forcefield by modifying the polymer consistent force field (PCFF) via refining a selected set of torsion potentials of the polymer backbone using accurate density functional theory (DFT) computations. After carefully assessing the dependence of critical simulation parameters, such as, polymer chain length, number of polymer chains, supercell size, and thermal quenching rate used in the simulation, the applicability and transferability of the modified PCFF (mPCFF) is demonstrated by directly comparing the computed T g predictions of various polymers with different chemistries, polymer side chain lengths and functional groups forming the polymer side chains against the respective experimentally measured values. Furthermore, the transport properties such as self-diffusion coefficient and viscosity are computationally determined and their well-known correlation with the target properties is demonstrated. Lastly, we have employed the developed approach to predict T g values for a number of yet-to-be-synthesized PHA-based polymers with a diverse set of functional groups in the polymer side chains. The results are further rationalized by correlating the predicted T g values with the inter-chain H-bond formation tendencies of the different side chain functional groups. This work represents an important first step towards computationally guided design of PHA-based functional polymers and opens up new directions for a systematic investigation of composition- and configuration-dependent structure–property relationships in more complex binary and ternary copolymer systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enzyme selection, optimization, and production toward biodegradation of post–consumer poly(ethylene terephthalate) at scale

Poly(ethylene terephthalate) (PET) is one of the world's most widely used polyester plastics. Due to its chemical stability, PET is extremely difficult to hydrolyze in a natural environment. Recent discoveries in new polyester hydrolases and breakthroughs in enzyme engineering strategies have inspired enormous research on biorecycling of PET. This study summarizes our research efforts toward large-scale, efficient, and economical biodegradation of post-consumer waste PET, including PET hydrolase selection and optimization, high-yield enzyme production, and high-capacity enzymatic degradation of post-consumer waste PET. First, genes encoding PETase and MHETase from Ideonella sakaiensis and the ICCG variant of leaf-branch compost cutinase (LCC ICCG ) were codon-optimized and expressed in Escherichia coli BL21(DE3) for high-yield production. To further lower the enzyme production cost, a pelB leader sequence was fused to LCC ICCG so that the enzyme can be secreted into the medium to facilitate recovery. To help bind the enzyme on the hydrophobic surface of PET, a substrate-binding module in a polyhydroxyalkanoate depolymerase from Alcaligenes faecalis (PBM) was fused to the C-terminus of LCC ICCG . The resulting four different LCC ICCG variants (LCC, PelB-LCC, LCC-PBM, and PelB-LCC-PBM), together with PETase and MHETase, were compared for PET degradation efficiency. A fed-batch fermentation process was developed to produce the target enzymes up to 1.2 g L –1 . Finally, the best enzyme, PelB-LCC, was selected and used for the efficient degradation of 200 g L –1 recycled PET in a well-controlled, stirred-tank reactor. Furthermore, the results will help develop an economical and scalable biorecycling process toward a circular PET economy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Mechanisms of Polyethylene Terephthalate Pellet Fragmentation into Nanoplastics and Assimilable Carbons by Wastewater Comamonas

Comamonadaceae bacteria are enriched on poly(ethylene terephthalate) (PET) microplastics in wastewaters and urban rivers, but the PET-degrading mechanisms remain unclear. Here, we investigated these mechanisms with Comamonas testosteroniKF-1, a wastewater isolate, by combining microscopy, spectroscopy, proteomics, protein modeling, and genetic engineering. Compared to minor dents on PET films, scanning electron microscopy revealed significant fragmentation of PET pellets, resulting in a 3.5-fold increase in the abundance of small nanoparticles (<100 nm) during 30-day cultivation. Infrared spectroscopy captured primarily hydrolytic cleavage in the fragmented pellet particles. Solution analysis further demonstrated double hydrolysis of a PET oligomer, bis(2-hydroxyethyl) terephthalate, to the bioavailable monomer terephthalate. Supplementation with acetate, a common wastewater co-substrate, promoted cell growth and PET fragmentation. Of the multiple hydrolases encoded in the genome, intracellular proteomics detected only one, which was found in both acetate-only and PET-only conditions. Homology modeling of this hydrolase structure illustrated substrate binding analogous to reported PET hydrolases, despite dissimilar sequences. Mutants lacking this hydrolase gene were incapable of PET oligomer hydrolysis and had a 21% decrease in PET fragmentation; re-insertion of the gene restored both functions. Thus, we have identified constitutive production of a key PET-degrading hydrolase in wastewater Comamonas, which could be exploited for plastic bioconversion.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Chitin- and cellulose-based sustainable barrier materials: a review

Abstract The accumulation of synthetic plastics used in packaging applications in landfills and the environment is a serious problem. This challenge is driving research efforts to develop biodegradable, compostable, or recyclable barrier materials derived from renewable sources. Cellulose, chitin/chitosan, and their combinations are versatile biobased packaging materials because of their diverse biological properties (biocompatibility, biodegradability, antimicrobial properties, antioxidant activity, non-toxicity, and less immunogenic compared to protein), superior physical properties (high surface area, good barrier properties, and mechanical properties), and they can be assembled into different forms and shapes (powders, fibers, films, beads, sponges, gels, and solutions). They can be either assembled into packaging films or used as fillers to improve the properties of other biobased polymers. Methods such as preparation of composites, multilayer coating, and alignment control are used to further improve their barrier, mechanical properties, and ameliorate their moisture sensitivity. With the growing application of cellulose and chitin-based packaging materials, their biodegradability and recyclability are also discussed in this review paper. The future trends of these biobased materials in packaging applications and the possibility of gradually replacing petroleum-based plastics are analyzed in the “Conclusions” section.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bioconversion of self-neutralized chemically depolymerized lignin streams into polyhydroxyalkanoates

Lignin is a chemically complex, diverse, and abundant plant polymer mainly composed of aromatic monomers. These aromatic monomers make lignin a potential source of aromatics and a viable substitute for petrochemically-derived aromatics. However, the structural recalcitrance of lignin requires harsh reagents from the chemical process and expensive catalysts for effective depolymerization. This chemical process often results in poor yields of chemical intermediate mixtures of varying bioavailability and/or toxicity. Furthermore, the cost of additional reagents required to separate or detoxify these intermediates makes processing lignin impractical. We report progress towards the use of such chemically depolymerized lignin streams by employing bacterial strains to produce polyhydroxyalkanoates (PHA). PHAs are a group of biodegradable microbial polyesters that have potential as a replacement for petroleum-based plastics. In this study we utilized two distinct lignin streams obtained after chemical depolymerization of lignin under alkaline and acidic pH in the presence of catalysts. We mixed the alkali-treated depolymerized stream with the acid-treated depolymerized stream to create a solution of neutral-pH chemically depolymerized lignin (CDL). We found moderate to substantial growth of both native and non-native PHA producers on the mixture of CDL as well as its aliphatic and aromatic components. PHA was detected by Sudan Black B staining in C. necator H16, P. putida KT2440, and E. coli LSBJ STQKAB grown on mixed CDL as the sole carbon source. For C. necator H16 and E. coli LSBJ STQKAB we found that PHA content was greater when grown on mixed CDL when compared to their preferred carbon source by GC-FID quantification. Our study provided progress towards a cost-competitive, sustainable, and industrially relevant use for lignin.

Winkler, Gordon L. W. [Univ. of Wisconsin, Madison↗
DOE OSTI2026

Elucidating biodegradation of dimethyl terephthalate by two Rhodococcus strains for its valorization applications

Dimethyl terephthalate (DMT) serves as the precursor in the production of polyethylene terephthalate, polytrimethylene terephthalate, and polybutylene terephthalate. The widespread use of DMT in the polymer industry and its ubiquitous existence in end products raise alarms about its potential harm to humans and animals. DMT can enter the environment through the degradation of polymers and their end products, and cause endocrine disruption, oxidative stress, and an elevated risk of cancer. In recent years, DMT has also gained renewed interest in its potential for plastic recycling and upcycling. In this study, we identified two strains of Rhodococcus that possess DMT-degrading capabilities and utilized transcriptomic analysis and gene knockout to elucidate the mechanisms of DMT degradation. R. opacus PD630 and R. jostii RPET were found to convert up to 1 g/L DMT into mono-methyl terephthalate (MMT). A putative DMTase (RS34275) was identified for this conversion. R. jostii RPET also demonstrates the ability to convert DMT into MMT and to utilize MMT for its cellular growth via the terephthalate pathway. A putative MMTase (RS21885) as the sole enzyme was identified for the conversion of MMT into terephthalate in the RPET strain. In addition, we successfully produced lycopene and lipids from an engineered RPET strain using DMT as a substrate. Our findings will facilitate future DMT bioremediation and bio-upcycling of DMT-associated plastics, enabling the production of value-added products.

Biodegradation↗
DOE OSTI2022

Catalytic production of tetrahydropyran (THP): a biomass-derived, economically competitive solvent with demonstrated use in plastic dissolution

Tetrahydropyran (THP) is a five-carbon heterocyclic ether that is non-carcinogenic, non-peroxide forming, biodegradable, and economically competitive with tetrahydrofuran (THF) as a solvent. In this work, THP has been synthesized from renewable biomass at >99.8% selectivity and 98% yield via hydrogenation of furfural-derived 3,4-dihydropyran (DHP) over Ni/SiO 2 in a continuous flow reactor at 150–200 °C. The apparent activation energy of THP formation is 31 kJ mol -1 , and the reaction orders with respect to the partial pressures of H 2 , DHP, and THP are: 2, 1, and -0.3. The kinetic data has been fitted to a Hougen–Watson model where the rate limiting step is the hydrogenation of adsorbed DHP. Ni/SiO 2 is shown to have a low deactivation rate constant of 0.012 h -1 over 100 h time on stream and can be regenerated in situ. As a performance advantage, THP is shown to be resistant to ring opening polymerization under strongly acidic conditions that THF is not, revealing it to be a superior solvent. Further, the minimum selling price of THP is competitive with the market price of THF ($$900 – 1400 per ton ) at a DHP feedstock cost of $1000 per ton. Conductor-like Screening Model for Real Solvents (COSMO-RS) and molecular dynamics (MD) simulations with 1008 solvents and 8 common plastics have demonstrated that THP can serve as an alternative solvent to THF, 2-methyltetrahydrofuran (MeTHF), and cyclopentyl methyl ether (CPME) for plastic dissolution, especially low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS) and polyvinyl chloride (PVC). This work establishes THP as a green solvent with excellent thermal, chemical and peroxidative stability that can be used for numerous applications, including waste plastic recycling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Flexible, transparent, and sustainable cellulose-based films for organic solar cell substrates

Cellulose, often considered a highly promising substitute for petroleum-based plastics, offers several compelling advantages, including abundant availability, cost-effectiveness, environmental friendliness, and biodegradability. However, its inherent highly crystalline structure and extensive hydrogen-bonded network pose challenges for processing and recycling. Here, in this study, we introduce the concept of cellulose vitrimers (CVs), wherein dynamic bonds are incorporated to reconfigure the hydrogen-bonded network, resulting in a mechanically robust, highly transparent material. CVs exhibit exceptional malleability, thermal stability, and noteworthy resistance to water and solvents. Due to the dynamic bond disassociation, CVs can be effectively chemically recycled using a well-established “dissolution-and-reforming” process. Moreover, CVs have proven successful as flexible substrate materials for organic solar cells, outperforming traditional petroleum-based polyethylene naphthalate (PEN). Given these advantages, CVs have the potential to replace conventional petroleum-based materials as recyclable and environmentally friendly alternatives, particularly within the realm of electronic devices and displays.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The phototrophic purple non‐sulfur bacteria Rhodomicrobium spp. are novel chassis for bioplastic production

Abstract Petroleum‐based plastics levy significant environmental and economic costs that can be alleviated with sustainably sourced, biodegradable, and bio‐based polymers such as polyhydroxyalkanoates (PHAs). However, industrial‐scale production of PHAs faces barriers stemming from insufficient product yields and high costs. To address these challenges, we must look beyond the current suite of microbes for PHA production and investigate non‐model organisms with versatile metabolisms. In that vein, we assessed PHA production by the photosynthetic purple non‐sulfur bacteria (PNSB) Rhodomicrobium vannielii and Rhodomicrobium udaipurense. We show that both species accumulate PHA across photo‐heterotrophic, photo‐hydrogenotrophic, photo‐ferrotrophic, and photo‐electrotrophic growth conditions, with either ammonium chloride (NH 4 Cl) or dinitrogen gas (N 2 ) as nitrogen sources. Our data indicate that nitrogen source plays a significant role in dictating PHA synthesis, with N 2 fixation promoting PHA production during photoheterotrophy and photoelectrotrophy but inhibiting production during photohydrogenotrophy and photoferrotrophy. We observed the highest PHA titres (up to 44.08 mg/L, or 43.61% cell dry weight) when cells were grown photoheterotrophically on sodium butyrate with N 2 , while production was at its lowest during photoelectrotrophy (as low as 0.04 mg/L, or 0.16% cell dry weight). We also find that photohydrogenotrophically grown cells supplemented with NH 4 Cl exhibit the highest electron yields – up to 58.89% – while photoheterotrophy demonstrated the lowest (0.27%–1.39%). Finally, we highlight superior electron conversion and PHA production compared to a related PNSB, Rhodopseudomonas palustris TIE‐1. This study illustrates the value of studying non‐model organisms like Rhodomicrobium for sustainable PHA production and indicates future directions for exploring PNSB metabolisms.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

In-Silico Design of Next Generation Cellulose-Derived Packaging Materials (CRADA Final Report)

Developing sustainable solutions for single-use packaging is an important objective to combat the environmental crisis of plastics pollution. Most embodiments of cellulose-based packaging materials, including CellophaneTM, are completely biodegradable in both terrestrial and marine environments. However, petroleum-derived alternatives offer some performance advantages for metrics such as moisture barriers and mechanical properties. This project leverages molecular dynamics simulation to investigate how molecular modifications to cellulose-based polymer assemblies impact their material properties. An important performance criterion for the modified materials was to retain biodegradability; thus, modifications by naturally occurring, biodegradable additives were the focus of this study. Specifically, we developed models with xylan and lignin of varying monomeric compositions into the cellulose matrix. The mechanical properties were investigated by performing stress-strain simulations, and the water barrier and hydrophobicity were investigated by simulating the water contact angle. Our findings indicate that the incorporation of xylan into the cellulose matrix tends to increase the mechanical properties with an optimal loading of ~27 wt%. We also predict that orienting the nanoscale directionality of the xylan chains such that they are perpendicular to the cellulose fibrils will dramatically increase mechanical strength. In contrast, the incorporation of lignin tends to weaken the composite at all loadings investigated. Simulations of water contact angle predicted that coating polymers on the surface of the cellulose assembly creates a more hydrophobic surface than incorporating them throughout the matrix. Of the coatings investigated, lignin resulted in the most hydrophobic surface, followed by pectin and keratin, which both imparted modest increases in hydrophobicity. Future experimental work done by Futamura will focus on designing material prototypes to capitalize on the predictions of performance enhancement obtained from molecular modeling. While substantial progress was made by the simulations performed in this project, there still exists a vast parameter space that we were unable to investigate, including branching, functional group decoration, and degree of polymerization of polymer additives. However, the methods developed in this initial investigation will facilitate more rapid evaluation of the impact of molecular characteristics on the performance of biopolymer composite materials and thereby accelerate future materials discovery efforts in this area.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-Throughput Characterization and Optimization of Polyamide Hydrolase Activity Using Open Port Sampling Interface Mass Spectrometry

Enzymatic biodegradation of polymers, such as polyamides (PA), has the potential to cost-effectively reduce plastic waste, but enhancements in degradation efficiency are needed. Engineering enzymes through directed evolution is one pathway toward identification of critical domains needed for improving activity. However, screening such enzymatic libraries (100s-to-1000s of samples) is time-consuming. Here we demonstrate the use of robotic autosampler (PAL) and immediate drop on demand technology (I.DOT) liquid handling systems coupled with open-port sampling interface-mass spectrometry (OPSI-MS) to screen for PA6 and PA66 hydrolysis by 6-aminohexanoate-oligomer endo-hydrolase (nylon hydrolase, NylC) in a high-throughput (8–20 s/sample) manner. The OPSI-MS technique required minimal sample preparation and was amenable to 96-well plate formats for automated processing. Enzymatic hydrolysis of PA characteristically produced soluble linear oligomer products that could be identified by OPSI-MS. Incubation temperatures and times were optimized for PA6 (65 °C, 24 h) and PA66 (75 °C, 24 h) over 108 experiments. In addition, the I.DOT/OPSI-MS quantified production of PA6 linear dimer (8.3 ± 1.6 μg/mL) and PA66 linear monomer (13.5 ± 1.5 μg/mL) by NylC with a lower limit of detection of 0.029 and 0.032 μg/mL, respectively. For PA6 and PA66, linear oligomer production corresponded to 0.096 ± 0.018% and 0.204 ± 0.028% conversion of dry pellet mass, respectively. The developed methodology is expected to be utilized to assess enzymatic hydrolysis of engineered enzyme libraries, comprising hundreds to thousands of individual samples.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Tailoring High Hardness and Rigidity in Biodegradable Thermoplastic Polyurethanes

In response to escalating environmental concerns, there is a pressing demand for materials capable of delivering both sustainability and robust mechanical properties, thereby substituting nonrenewable counterparts in various applications. This study presents a comprehensive investigation into the synthesis and characterization of biobased aliphatic thermoplastic polyurethanes (TPUs) that exhibit impressive mechanical properties, including tensile strength in the range of 48–41 MPa and flexural modulus up to 2.2 GPa. These biodegradable TPUs displayed high shore A and D hardness between 95 and 98 and 51–42, respectively, and thus can be categorized as “extra hard” plastics according to the durometer scale for PUs. Herein, we have prepared a series of four 100% biobased polyester polyols from biobased diacid and chain-extender as precursors with molecular weights varying from 500 to 1400 g/mol. The corresponding TPUs that were prepared by using an aliphatic diisocyanate were evaluated for their thermal stability, microphase separation, mechanical properties, and biodegradation. By leveraging renewable feedstocks, these TPUs offer a sustainable alternative to petroleum-derived materials, with their mechanical performance meeting conventional benchmarks. Furthermore, postcomposting analysis revealed significant surface degradation, affirming their biodegradability and environmental compatibility.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Recent Advances in Biological Recycling of Polyethylene Terephthalate (PET) Plastic Wastes

Polyethylene terephthalate (PET) is one of the most commonly used polyester plastics worldwide but is extremely difficult to be hydrolyzed in a natural environment. PET plastic is an inexpensive, lightweight, and durable material, which can readily be molded into an assortment of products that are used in a broad range of applications. Most PET is used for single-use packaging materials, such as disposable consumer items and packaging. Although PET plastics are a valuable resource in many aspects, the proliferation of plastic products in the last several decades have resulted in a negative environmental footprint. The long-term risk of released PET waste in the environment poses a serious threat to ecosystems, food safety, and even human health in modern society. Recycling is one of the most important actions currently available to reduce these impacts. Current clean-up strategies have attempted to alleviate the adverse impacts of PET pollution but are unable to compete with the increasing quantities of PET waste exposed to the environment. In this review paper, current PET recycling methods to improve life cycle and waste management are discussed, which can be further implemented to reduce plastics pollution and its impacts on health and environment. Compared with conventional mechanical and chemical recycling processes, the biotechnological recycling of PET involves enzymatic degradation of the waste PET and the followed bioconversion of degraded PET monomers into value-added chemicals. This approach creates a circular PET economy by recycling waste PET or upcycling it into more valuable products with minimal environmental footprint.

42 ENGINEERING↗