Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer bridges”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

Constitutive Modeling of the Facesheet to Core Interface in Honeycomb Sandwich Panels Subject to Mode I Delamination

A new cohesive zone traction-separation law, which includes the effects of fiber bridging, has been developed, implemented with a finite element (FE) model, and applied to simulate the delamination between the facesheet and core of a composite honeycomb sandwich panel. The proposed traction-separation law includes a standard initial cohesive component, which accounts for the initial interfacial stiffness and energy release rate, along with a new component to account for the fiber bridging contribution to the delamination process. Single cantilever beam tests on aluminum honeycomb sandwich panels with carbon fiber reinforced polymer facesheets were used to characterize and evaluate the new formulation and its finite element implementation. These tests, designed to evaluate the mode I toughness of the facesheet to core interface, exhibited significant fiber bridging and large crack process zones, giving rise to a concave downward concave upward pre-peak shape in the load-displacement curve. Unlike standard cohesive formulations, the proposed formulation captures this observed shape, and its results have been shown to be in excellent quantitative agreement with experimental load-displacement and apparent critical energy release rate results, representative of a payload fairing structure, as well as local strain fields measured with digital image correlation.

composites↗
DOE OSTI2025

Population Balance Models for Catalytic Depolymerization: From Elementary Steps to Multiphase Reactors

Here, the ongoing accumulation of plastic waste in landfills and in the environment is driving research on chemical processes and catalysts to recycle polymers. Traditional modeling strategies are not applicable to these processes because they involve too many reactants and intermediates, one for each molecular weight and each functionalization. To model the kinetics, we have developed population balance models (PBMs) that account for macromolecular reactants in the bulk and macromolecular catalytic intermediates. These PBMs couple to each other through polymer adsorption and desorption models and to traditional rate equations for small molecule products and co-reactants (like hydrogen or ethylene). The models, in combination with experimental data, are being used in many ways: (i) to test mechanistic hypotheses, (ii) to extract rate parameters, (iii) to quantitatively compare catalyst activities, (iv) to account for mass transfer and vapor–liquid partitioning in two-phase reactors, and (v) to design novel support architectures and catalysts that mimic the processive action of natural depolymerization enzymes. Some key theoretical advances allow PBMs to be constructed from elementary rates and mechanisms, as opposed to traditional formulations with pseudoelementary rate parameters invoked as fitting parameters. We discuss ways to build these models “bottom-up” from first-principles calculations and ways to extract model parameters from “top down” analyses of rate data. The combination provides a quantitative bridge between first-principles calculations and the kinetics of complex macromolecular transformations for polymer upcycling and beyond.

Manis, Lela K. [University of Illinois at Urbana-C↗
DOE OSTI2025

Single-Molecule Conductance through Hybrid Radially and Linearly π-Conjugated Macromolecules Reveals an Unusual Intramolecular π-Interaction

We describe the design, synthesis, and single-molecule junction conductance of π-electron molecules bearing both radial and linear π-conjugation pathways, whereby cycloparaphenylene (CPP) radial cores are π-extended linearly with aryl alkyne substituents as models for previously reported CPP-arylene ethynylene conjugated polymers. Although radially and linearly conjugated molecules have been studied previously in isolation as junction-bridging molecular electronic units, this is the first study to examine molecules where both topologies are operative. Our results reveal that the presence of radial CPP components within the junction-spanning pathway leads to a reduction in the conductance of the backbone compared to model linear phenyl substituents. Through tight-binding and DFT-based calculations, we attribute this conductance change to intramolecular van der Waals (vdW) interactions between the CPP ring and the junction-spanning arylene-ethynylene molecular backbone. These interactions induce changes in the dihedral angles of the backbone, leading to a reduced overlap of π orbitals within the molecular junction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1988

Fractography of composite delamination

Studies were made of the fractography of mode 2 delamination and the impact damage of carbon fiber reinforced polymer composites. Laminates fractured under mode 2 loading were potted in a clear epoxy polymer, sectioned and polished and examined using transmission and reflection light microscopy. There were only occasional fibers bridging the mode 2 cracks. These cracks were not always visible probably because the crack opening displacement was too small as to be resolved using light microscopy. A study was made of the effect of repetitive impacts on laminates of AS4/3501-6 and IM6/3501-6. Plots of cumulative impact energy vs cumulative absorbed energy exhibited a sharp change in slope which corresponded to the damage area reaching the edges of the specimen. The initial slope was highly reproducible for both composite materials. On the other hand, the intersection point between the two slopes, where the damage area reaches the specimen edges, was highly variable between specimens. This variability is tentatively ascribed to differences in laminate quality.

Source record↗
DOE OSTI2024

Block copolymer-mediated synthesis of TiO2/RuO2 nanocomposite for efficient oxygen evolution reaction

Abstract An amphiphilic block copolymer, poly (styrene-2-polyvinyl pyridine-ethylene oxide), was used as a structure-directing and stabilizing agent to synthesize TiO 2 /RuO 2 nanocomposite. The strong interaction of polymers with metal precursors led to formation of a porous heterointerface of TiO 2 /RuO 2 . It acted as a bridge for electron transport, which can accelerate the water splitting reaction. Scanning electron microscopy, energy-dispersive X -ray spectroscopy, transmission electron microscopy, and X -ray diffraction analysis of TiO 2 /RuO 2 samples revealed successful fabrication of TiO 2 /RuO 2 nanocomposites. The TiO 2 /RuO 2 nanocomposites were used to measure electrochemical water splitting in three-electrode systems in 0.1-M KOH. Electrochemical activities unveil that TiO 2 /RuO 2 -150 nanocomposites displayed superior oxygen evolution reaction activity, having a low overpotential of 260 mV with a Tafel slope of 80 mVdec −1 . Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2022

Towards directed energy deposition of metals using polymer-based supports: porosity of 316L stainless steel deposited on carbon-fiber-reinforced ABS

Directed energy deposition (DED) is increasingly valuable to many industries because of its high deposition rates relative to other metal additive manufacturing processes, but the design space of DED is limited. For instance, steep overhangs are difficult or impossible to manufacture. Polymer-based support structures could help address this challenge. The viability of DED on polymer composite substrates has begun to be explored, specifically with 316L stainless steel on carbon-fiber-reinforced ABS substrates. Monolithic metal components can be deposited on the polymer, but it was found that gas release during polymer degradation causes porosity due to gas entrapment in the metal. An interlayer cooling time was introduced to reduce polymer degradation and decrease the porosity due to gas entrapment, but this led to porosity from lack of fusion. The results of this work provide insight into process parameter selection and scan strategy development to enable the use of polymer support structures in blown-powder DED.

Kurfess, Rebecca↗
DOE OSTI2026

Ionic Liquid‐Driven Modulation of DNA Brush Morphology on Nanoparticle Surfaces

Here, the morphology of DNA is strongly influenced by its surrounding environment, including factors such as pH, salt type and valency, and the presence of polymers. Inorganic salts are known to reduce the DNA chain length through mechanisms like electrostatic screening and ion bridging. In contrast, ionic liquids, a new class of organic salts, have previously been found to increase the DNA chain length, indicating a distinct mode of interaction between the ionic liquid and DNA chains. This study utilizes self-assembled DNA-AuNPs as a model system to examine changes in the DNA chain morphology and the nanoscale interaction mechanisms in an ionic liquid environment. The DNA chain lengths are measured in solution using X-ray scattering measurements at varying concentrations of two imidazolium ([$BMIM$] acetate and [$EMIM$] acetate) based ionic liquids. Additionally, Molecular Dynamics (MD) simulations are performed mimicking the experimental system. Our results suggest an interplay of electrostatic and groove-binding interactions governing the DNA chain morphology, which depends on IL concentration and the composition of the DNA chains. It has been found that for DNA chains with majority ssDNA, electrostatic interaction dominate, however with increasing composition of double strands, the DNA chains exhibit compaction due to a non-electrostatic hydrophobic groove-binding mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS2002

Design and Synthesis of Novel Block Copolymers for Efficient Opto-Electronic Applications

It has been predicted that nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks may facilitate the charge carrier separation and migration in organic photovoltaic devices due to improved morphology in comparison to polymer blend system. This paper presents preliminary data describing the design and synthesis of a novel Donor-Bridge-Acceptor (D-B-A) block copolymer system for potential high efficient organic optoelectronic applications. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene (PPV), the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene (PPV), and the bridge block contains an electronically neutral non-conjugated aliphatic hydrocarbon chain. The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block stabilizes and facilitates the transport of the holes, the acceptor block stabilizes and facilitates the transport of the electrons, the bridge block is designed to hinder the probability of electron-hole recombination. Thus, improved charge separation and stability are expected with this system. In addition, charge migration toward electrodes may also be facilitated due to the potential nano-phase separated and highly ordered block copolymer ultra-structure.

Sun, Sam-Shajing↗
DOE OSTI2021

Bioderived biphenyl-containing compounds and their conversion to polymers and macromonomers

The present disclosure relates to a composition that includes where A includes at least one of a carbon-carbon bond or a bridging group, R includes between 0 and 4 of a first hydrocarbon, and n is between 2 and 3,000. In some embodiments of the present disclosure, the bridging group may include a linear hydrocarbon chain and/or a branched hydrocarbon chain. In some embodiments of the present disclosure, the bridging group may include between 1 and 10 carbon atoms.

Rorrer, Nicholas↗
DOE OSTI2024

Developing Benzodithiophene-Free donor polymer for 19.36% efficiency Green-Solvent-Processable organic solar cells

Here, in this work, a newly benzodithiophene-free D-A polymer donor, named PDTP-BDD, was developed for realizing green-solvent processed high-performance OSCs. By bridging two electron-rich unit of dithieno[3,2-b:2',3'-d]pyridin-5(4H)-one (DTP) and electron-deficient benzo[1,2-c:4,5c']dithiophene-4,8-dione (BDD) with thiophene units, PDTP-BDD possesses high absorption in the short wavelength range and a deep HOMO energy level. The rigid building blocks also make PDTP-BDD has strong aggregation and poor solubility in common halogen-free solvents (such as o-xylene) at room temperature, but it is readily dissolved and disaggregated at high temperature (120 °C). After cooling down to a lower temperature (60 °C), PDTP-BDD self-assembled and pre-aggregated slowly in the solution at a long time. By employing a delayed processing strategy in the layer-by-layer processed OSCs (LbL-OSCs), an optimized fibril network of the underling layer was realized, enabling the permeation of acceptor into the donor network. The optimized PDTP-BDD/L8-BO-based LbL-OSCs realized a high PCE of 18.42 %. By adding a small amount of D18 to further optimize the PDTP-BDD fibril network, an impressive PCE of 19.36 % was achieved finally in the resulting ternary LbL-OSCs, which is the highest value for OSCs processed by halogen-free solvents.

36 MATERIALS SCIENCE↗
NASA NTRS2011

Effect of Data Reduction and Fiber-Bridging on Mode I Delamination Characterization of Unidirectional Composites

Reliable delamination characterization data for laminated composites are needed for input in analytical models of structures to predict delamination onset and growth. The double-cantilevered beam (DCB) specimen is used to measure fracture toughness, GIc, and strain energy release rate, GImax, for delamination onset and growth in laminated composites under mode I loading. The current study was conducted as part of an ASTM Round Robin activity to evaluate a proposed testing standard for Mode I fatigue delamination propagation. Static and fatigue tests were conducted on specimens of IM7/977-3 and G40-800/5276-1 graphite/epoxies, and S2/5216 glass/epoxy DCB specimens to evaluate the draft standard "Standard Test Method for Mode I Fatigue Delamination Propagation of Unidirectional Fiber-Reinforced Polymer Matrix Composites." Static results were used to generate a delamination resistance curve, GIR, for each material, which was used to determine the effects of fiber-bridging on the delamination growth data. All three materials were tested in fatigue at a cyclic GImax level equal to 90% of the fracture toughness, GIc, to determine the delamination growth rate. Two different data reduction methods, a 2-point and a 7-point fit, were used and the resulting Paris Law equations were compared. Growth rate results were normalized by the delamination resistance curve for each material and compared to the nonnormalized results. Paris Law exponents were found to decrease by 5.4% to 46.2% due to normalizing the growth data. Additional specimens of the IM7/977-3 material were tested at 3 lower cyclic GImax levels to compare the effect of loading level on delamination growth rates. The IM7/977-3 tests were also used to determine the delamination threshold curve for that material. The results show that tests at a range of loading levels are necessary to describe the complete delamination behavior of this material.

Murri, Gretchen B.↗
DOE OSTI2026

Multiscale modeling of packed-bed microwave reactors and estimation of intrinsic materials' permittivity

Modeling of packed-bed microwave reactors relies on an accurate representation of particle size, shape, and distribution within the bed, as well as the particles' dielectric properties. The measured permittivity of microwave susceptors (powders or structured materials) depends on the geometric features of the particles and the porosity of the bed, as well as the specific form factor of a structured material. These are effective properties and cannot be used to analyze other reactor configurations unless the geometric effects are removed. Therefore, we introduce a methodology for extracting the intrinsic particle permittivity from experimentally measured effective permittivity by combining cavity-based measurements with multiscale simulations and machine learning. Further, we develop the first multiscale model of packed-bed microwave reactors that incorporate particle effects (geometric features, random packing, and particle contact). This approach bridges macroscopic observables with mesoscopic physics, enabling analysis of local hotspots, arcing, and contact effects that control reactor performance. Using polymer-based spherical activated carbon (PBSAC) and silicon carbide (SiC) as examples, we demonstrate that the inferred particle permittivity is consistent with independent experimental heating profiles we collect from microwave reactors without adjustable parameters. Finally, this methodology establishes a foundation for predictive, multiscale design of microwave packed-bed reactors that explicitly accounts for particle-scale effects, enabling the estimation of intrinsic permittivity for the first time.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1984

Composite interlaminar fracture - Effect of matrix fracture energy

A major result of the use of the double cantilever beam test to provide a measure of the interlaminar fracture energy in composites subjected to simple Mode I-type loading is the observation that increasing the toughness of the matrix resin by as much as a factor of 20 produced a major (approximately four-fold) increase in interlaminar fracture energy. The data presently analyzed show that, with brittle polymers, resin toughness is fully transferred to the composite, while in the case of tougher polymers the resin toughness is only partially transferred due to the fibers' restriction of the crack tip deformation zone in the polymer, together with their changing of local stress field details. Factors which tend to increase interlaminar toughness are fiber nesting and bridging, as well as fiber breakage and pull-out during crack growth.

Hunston, D. L.↗
NASA NTRS1996

Protective Coatings

Ameron International Protective Coatings Group developed a special coating for NASA that would withstand the high temperatures generated by the Space Shuttle rocket engines. The coating remains intact for at least 10 minutes, and insulates the launch pad so that it does not exceed 150 degrees and buckle. The NASA formulation was from Ameron's Engineered Siloxane (PSX) chemistry, which employs an inorganic silicon-oxygen structure which the company states is stronger and more reliable than organic polymers. Some of Ameron's PSX product line is based on the NASA technology, used for everything from industrial equipment to bridges.

Source record↗
DOE OSTI2021

Protein-Mimetic Self-Assembly with Synthetic Macromolecules

Protein-mimetic amphiphiles have significant promise as a platform to access the complex functions of natural biological materials and incorporate the tunability and environmental resilience of synthetic materials. The fields of polymer chemistry and chemical biology have concurrently approached the development of biomimetic amphiphiles with materials ranging from random amphiphilic copolymers to peptide–lipid conjugates. In this Perspective, we incorporate strategies from diverse chemical arenas for controlling assembled morphologies and dynamics of protein-mimetic synthetic macromolecules. An overview of significant advances in peptide amphiphiles and single-chain polymer nanoparticles provides the foundation for comparing recent advances in the implementation of multiple intermolecular interactions and computational strategies to fine-tune the assembled structures. We aim to bridge these fields, combining insights from multiple disciplines to inspire new approaches for the development of protein-mimetic materials, as these assemblies have far-reaching applications including in the development of new sensors, catalysts, and therapeutics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1965

Electronic modules easily separated from heat sink

Metal heat sink and electronic modules bonded to a thermal bridge can be easily cleaved for removal of the modules for replacement or repair. A thin film of grease between a fluorocarbon polymer film on the metal heat sink and an adhesive film on the modules acts as the cleavage plane.

Source record↗
NASA NTRS2001

Novel High Efficient Organic Photovoltaic Materials

In man's mission to the outer space or a remote site, the most abundant, renewable, nonpolluting, and unlimited external energy source is light. Photovoltaic (PV) materials can convert light into electrical power. In order to generate appreciable electrical power in space or on the Earth, it is necessary to collect sunlight from large areas due to the low density of sunlight, and this would be very costly using current commercially available inorganic solar cells. Future organic or polymer based solar cells seemed very attractive due to several reasons. These include lightweight, flexible shape, ultra-fast optoelectronic response time (this also makes organic PV materials attractive for developing ultra-fast photo detectors), tunability of energy band-gaps via molecular design, versatile materials synthesis and device fabrication schemes, and much lower cost on large-scale industrial production. It has been predicted that nano-phase separated block copolymer systems containing electron rich donor blocks and electron deficient acceptor blocks will facilitate the charge separation and migration due to improved electronic ultrastructure and morphology in comparison to current polymer composite photovoltaic system. This presentation will describe our recent progress in the design, synthesis and characterization of a novel donor-bridge-acceptor block copolymer system for potential high-efficient organic optoelectronic applications. Specifically, the donor block contains an electron donating alkyloxy derivatized polyphenylenevinylene, the acceptor block contains an electron withdrawing alkyl-sulfone derivatized polyphenylenevinylene, and the bridge block contains an electronically neutral non-conjugated aliphatic hydrocarbon chain. The key synthetic strategy includes the synthesis of each individual block first, then couple the blocks together. While the donor block stabilizes the holes, the acceptor block stabilizes the electrons. The bridge block is designed to hinder the electron-hole recombination. Thus, improved charge separation is expected. In addition, charge migration will also be facilitated due to the expected nano-phase separated and highly ordered block copolymer ultrastructural. The combination of all these factors will result in significant overall enhancement of photovoltaic power conversion efficiency.

Sun, Sam↗
DOE OSTI2021

Optimized molecular aggregation via incorporating fluorinated unit in the polymer donor for 17.3% efficiency organic solar cells

Regulating molecular aggregation state via chemical modification of photovoltaic materials to optimize the blend morphology is an effective and challenging strategy to improve the photovoltaic performance of organic solar cells (OSCs). Here, in this work, we demonstrate a random terpolymerization strategy by incorporating 1,3-bis(5-bromo-4-fluorothiophen-2-yl)-5,7-bis(2-ethylhexyl)-4H,8H-benzo[1,2-c:4,5-c']bisthiophene-4,8-dione (BFT, 30 mol%) unit with fluorinated π-bridges into the molecular backbone of PM6 and develop a terpolymer PF1. Benefiting from the strong electronegativity of fluorine atom and noncovalent interaction of F---S, the energy levels, molecular ordering, and aggregation properties of the polymer donors are precisely regulated. Notably, in the active layer film based on PF1: Y6, the π-π stacking distance can reduce to 3.51 Å, which is significantly smaller than that of PM6:Y6 (3.65 Å) and boosts the effective exciton dissociation and charge transport, thereby effectively optimize the photovoltaic properties of the related devices. As a result, the PF1:Y6-based OSCs achieved a power conversion efficiency (PCE) of up to 17.3%, which is much higher than that of the controlled OSCs based on PM6:Y6 (PCE = 16.2%). These results demonstrate high-efficiency OSCs enabled by regulating molecular aggregation via terpolymerization strategy.

14 SOLAR ENERGY↗