Search NASA⌕ Search

SEARCH · Search NASA

Results for “polymer bridges”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Abbr. Final report: Self-assembled molecular containers as artificial water channels: towards biomimetic desalination membranes

Global water scarcity demands advances in desalination technologies that can deliver more fresh water with less energy. Current reverse osmosis membranes are fundamentally limited by a trade-off between how much water they can pass and how well they block salts. To address this challenge, we developed a bottom-up strategy to design and test artificial water channels that mimic the efficiency of biological proteins but are built from robust synthetic molecules. Over two years, we synthesized and evaluated more than twenty molecular channel candidates, including supramolecular macrocycles and nanographene pores with atomically precise structures. We showed that small chemical modifications allow direct control over pore size and chemistry, which in turn govern water permeability and salt rejection. In collaboration with university partners, we reported the first experimental demonstration of water transport through a nanographene pore, bridging a long-standing gap between simulation and experiment. Several of the artificial channels we developed achieved water–salt selectivity beyond conventional polymer membranes, highlighting their potential for next-generation desalination and precision separations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Supramolecular assembly of polycation/mRNA nanoparticles and in vivo monocyte programming

Size-dependent phagocytosis is a well-characterized phenomenon in monocytes and macrophages. However, this size effect for preferential gene delivery to these important cell targets has not been fully exploited because commonly adopted stabilization methods for electrostatically complexed nucleic acid nanoparticles, such as PEGylation and charge repulsion, typically arrest the vehicle size below 200 nm. Here, we bridge the technical gap in scalable synthesis of larger submicron gene delivery vehicles by electrostatic self-assembly of charged nanoparticles, facilitated by a polymer structurally designed to modulate internanoparticle Coulombic and van der Waals forces. Specifically, our strategy permits controlled assembly of small poly(β-amino ester)/messenger ribonucleic acid (mRNA) nanoparticles into particles with a size that is kinetically tunable between 200 and 1,000 nm with high colloidal stability in physiological media. We found that assembled particles with an average size of 400 nm safely and most efficiently transfect monocytes following intravenous administration and mediate their differentiation into macrophages in the periphery. When a CpG adjuvant is co-loaded into the particles with an antigen mRNA, the monocytes differentiate into inflammatory dendritic cells and prime adaptive anticancer immunity in the tumor-draining lymph node. This platform technology offers a unique ligand-independent, particle-size-mediated strategy for preferential mRNA delivery and enables therapeutic paradigmsviamonocyte programming.

Science & Technology - Other Topics↗
DOE OSTI2026

Microphase Separation of Randomly Linked Branched Polystyrene/Polylactic Acid for Formation of Cocontinuous Nanostructures

Cocontinuous polymeric nanomaterials have gained attention for their ability to preserve distinct properties of constituent microphases within a single material. Randomly linked copolymer networks have shown very wide stability windows for disordered cocontinuous phases (extending over ≈ 30 wt % in composition), but the reliance on a network architecture prevents subsequent solution- or melt-processing. Furthermore, the key factors contributing to cocontinuity have remained unclear. We recently found that randomly linked star copolymers (RSCs) can exhibit a cocontinuous window as wide as 25 wt % in the case of 4-arm stars, suggesting that while a network architecture is not essential for the formation of disordered cocontinuous phases, the presence of random elastic forces in such architectures may indeed facilitate their formation. In addition, the behavior was found to be highly sensitive to arm number, with 6-arm RSCs exhibiting almost no cocontinuous phase. These results raised a key mechanistic question regarding the contribution of random elastic forces, originating from strands that bridge between junctions, in stabilizing disordered cocontinuous phases. In the current study, we synthesized randomly linked branched copolymers (RBCs) of polystyrene (PS) and poly(D,L-lactic acid) (PLA), which represent an intermediate architecture between networks and stars. This approach allows for the introduction of elastic contributions from strands bridging between different junctions, while still maintaining the processability advantages of a non-network architecture. The cocontinuous regions of the PS/PLA RBCs, with varying polymer and linker functionalities (f p and f l , respectively), were characterized by small-angle X-ray scattering, gravimetry, and scanning electron microscopy. We found that the cocontinuous windows of RBCs typically expanded with increasing elastic contributions and exhibited reduced sensitivity to junction-functionality compared to RSCs. Notably, RBCs with f p = 1.50 and f l = 3, which had large molecular weights due to proximity to the gel point, achieved a cocontinuous window of ≈ 34 wt %, which is almost twice as wide as analogous 3-arm RSCs and comparable to randomly linked networks. Leveraging this robust cocontinuity and solution-processability, we fabricated a film of interconnected nanoporous PS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Liquid state theory of the structure of model polymerized ionic liquids

We employ polymer integral equation theory to study a simplified model of semiflexible polymerized ionic liquids (PolyILs) that interact via hard core repulsions and short range screened Coulomb interactions. The multi-scale structure in real and Fourier space of PolyILs (ions chosen to mimic Li, Na, K, Br, PF 6 , and TFSI) are determined as a function of melt density, Coulomb interaction strength, and ion size. Comparisons with a homopolymer melt, a neutral polymer–solvent-like athermal mixture, and an atomic ionic liquid are carried out to elucidate the distinct manner that ions mediate changes of polymer packing, the role of excluded volume effects, and the influence of chain connectivity, respectively. The effect of Coulomb strength depends in a rich manner on ion size and density, reflecting the interplay of steric packing, ion adsorption, and charge layering. Ion-mediated bridging of monomers is found, which intensifies for larger ions. Intermediate range charge layering correlations are characterized by a many-body screening length that grows with PolyIL density, cooling, and Coulomb strength, in disagreement with Debye–Hückel theory, but in accord with experiments. Qualitative differences in the collective structure, including an ion-size-dependent bifurcation of the polymer structure factor peak and pair correlation function, are predicted. The monomer cage order parameter increases significantly, but its collective ion counterpart decreases, as ions become smaller. Such behaviors allow one to categorize PolyILs into two broad classes of small and large ions. Furthermore, dynamical implications of the predicted structural results are qualitatively discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Chemiresistor sensor based on ion-imprinted polymer (IIP)-functionalized rGO for Cd(II) ions in water

This study reports the design and development of a novel chemiresistor (CR) sensor using ion imprinted polymer (IIP)-functionalized reduced graphene oxide (rGO) [IIP/rGO-CR] for cadmium ions (Cd(II)) determination in water. The sensor consisted of a CR transducer made of rGO channel bridging source and drain electrodes prepared by self-assembly and thermal reduction of graphene oxide (GO) on Au interdigitated electrodes chip fabricated on Si/SiO 2 substrate. The IIP was then grafted on rGO using surface-initiated reversible addition-fragmentation chain transfer (RAFT) polymerization with polyethylenimine (PEI) and methylacrylic acid (MAA) as dual functional monomers and Cd(II) ions as template through UV light-initiated copolymerization. The IIP functionalized on rGO acted as an effective recognition element that modulated the resistance of rGO-CR upon binding of Cd(II), enabling Cd(II) detection at ppb level in aqueous solutions. The prepared IIP/rGO-CR sensor worked effectively in the linear range of 2~200ppb and achieved a limit of detection (LOD) of 0.83 ppb, which is lower than the World Health Organization guidelines of 3ppb for drinking water quality. The developed sensor of IIP/rGO-CR showed a high selectivity against a variety of trace and heavy metal ions found in water and good stability for up to 60 days when stored at room temperature for Cd(II) determination in water. Further, the sensor was successfully applied to analyzing Cd(II) spiked in tap, lake and river waters with a 94.5%–113.5% recovery, demonstrating a high degree of accuracy even in complex water samples. Finally, our results illustrated that the CR sensor of IIP functionalized rGO provides a potential platform for sensitive, robust and low-cost environmental analysis of Cd(II) in water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Engineering Assembly Kinetics and Line Roughness in Solvent Vapor-Annealed Block Copolymer/Homopolymer Blends

Block copolymer (BCP) directed self-assembly (DSA) is a promising route to enhance lithography resolution by multiplying nanopattern density and reducing feature roughness. Eliminating kinetically trapped self-assembly defects requires fast self-assembly. However, acceleration strategies like solvent vapor annealing or homopolymer blending broaden domain interfaces, implying a trade-off in increased feature roughness. In this work, we experimentally investigate this apparent dilemma between self-assembly kinetics and line roughness for solvent vapor-annealed thin films of a lamellar poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) BCP blended with PS and P2VP homopolymers. Binary blends with PS or P2VP homopolymers and ternary blends incorporating both in equal weight fractions were solvent vapor annealed using acetone, a near-neutral solvent for PS and P2VP, followed by P2VP-selective vapor-phase infiltration with alumina (AlOx) and polymer etching. Binary blends with P2VP exhibit a modest kinetic enhancement but also higher line-edge and -width roughness due to the increased frequency of P2VP protrusions and bridge defects in the alumina line patterns. In contrast, binary blends with PS self-assemble noticeably faster, while domain asymmetry from the added PS homopolymer reduces roughness by curbing the number of alumina protrusions and bridge defects. Ternary blends maintain DSA line patterns across a wider composition window and, at higher homopolymer loadings, reduce roughness at length scales near the lamellar period, consistent with a reduced impact of intradomain compositional fluctuations. These findings provide important insights for codesigning blend compositions and process flows to achieve high-resolution, defect free patterns with minimal roughness through BCP DSA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Designing clay-polymer nanocomposite sorbents for water treatment: A review and meta-analysis of the past decade

Clay-polymer nanocomposites (CPNs) have been studied for two decades as sorbents for water pollutants, but their applicability remains limited. Our aim in this review is to present the latest progress in CPN research using a meta-analysis approach and identify key steps necessary to bridge the gap between basic research and CPN application. Based on results extracted from 99 research articles on CPNs and 8 review articles on other widely studies sorbents, CPNs had higher adsorption capacities for several inorganic and organic pollutant classes (including heavy metals, oxyanions, and dyes, n = 308 observations). We applied principal component analysis, analysis of variance, and multiple linear regressions to test how CPN and pollutant properties correlated with Langmuir adsorption model coefficients. While adsorption was, surprisingly, not influenced by mineral properties, it was influenced by CPN fabrication method, polymer functional groups, and pollutant properties. For example, among the pollutant classes, heavy metals had the highest adsorption capacity but the lowest adsorption affinity. Conversely, dyes had high adsorption affinities, as reflected by the linear correlation between adsorption affinity and pollutant molecular weight. Scaling from ‘basic research’ to ‘technological application’ requires testing CPN performance in real water, application in columns, comparison to commercial sorbents, regeneration, and cost evaluation. However, our survey indicates that of the 158 observations, only 20 compared the CPN's performance to that of a commercial sorbent. We anticipate that this review will promote the design of smart and functional CPNs, which can then evolve into an effective water treatment technology.

42 ENGINEERING↗
DOE OSTI2020

Scaling Trivalent Actinide and Lanthanide Recovery by Diglycolamide Resin from Savannah River Site’s Mark-18A Targets

The Savannah River National Laboratory is implementing a separation flowsheet to recover rare isotopes and transplutonium elements from irradiated 242 Pu targets known as Mark-18A targets. The Mark-18A targets contain the United States’ supply of nonseparated 244 Pu, which has a wide range of applications from nuclear forensics to production of superheavy elements such as flerovium. The targets also contain hundreds of grams of heavy curium ( 246–248 Cm), which is used as a target material for 252 Cf production. This work investigates the use of diglycolomide resin (DGA Resin) to recover valuable trivalent actinides from the Mark-18A targets. Batch contact experiments were performed on a representative simulant to determine mass loadings. Furthermore, the resin showed an overall capacity of 11 mg/mL for a mixed metal matrix (Zr and La–Gd). Column experiments showed chromatographic separation with transition-metal breakthroughs occurring first followed by the lanthanide series La–Gd. The experiments showed that lanthanide breakthrough occurred after 11 mg/mL mass loading was reached on the column with the mixed metal matrix. A radiological column experiment with an in-line UV/vis cell was able to detect Nd breakthrough just prior to 241 Am breakthrough. Implementing an in-line UV/vis cell into full-scale Mark-18A target processing will be used to limit breakthrough of trivalent actinides recovered from the targets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Covalently-Bonded Laminar Assembly of Van der Waals Semiconductors with Polymers: Toward High-Performance Flexible Devices

Van der Waals semiconductors (vdWS) offer superior mechanical and electrical properties and are promising for flexible microelectronics when combined with polymer substrates. However, the self-passivated vdWS surfaces and their weak adhesion to polymers tend to cause interfacial sliding and wrinkling, and thus, are still challenging the reliability of vdWS-based flexible devices. Here, in this study, an effective covalent vdWS–polymer lamination method with high stretch tolerance and excellent electronic performance is reported. Using molybdenum disulfide (MoS 2 ) and polydimethylsiloxane (PDMS) as a case study, gold–chalcogen bonding and mercapto silane bridges are leveraged. The resulting composite structures exhibit more uniform and stronger interfacial adhesion. This enhanced coupling also enables the observation of a theoretically predicted tension-induced band structure transition in MoS 2 . Moreover, no obvious degradation in the devices’ structural and electrical properties is identified after numerous mechanical cycle tests. This high-quality lamination enhances the reliability of vdWS-based flexible microelectronics, accelerating their practical applications in biomedical research and consumer electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Pressure-Induced Reduction of Dicyanamide by Samarium(II) in a Coordination Polymer

A samarium(II) coordination polymer, [Sm(2.2.2- cryptand)(dca)]I (dca− = dicyanamide), has been prepared from the reaction of SmI2 with tetrabutylammonium dicyanamide and 2.2.2- cryptand. The structure consists of [Sm(2.2.2-cryptand)] 2+ cations bridged by dicyanamide to form corrugated 1D chains. Single crystals of this compound have been studied spectroscopically using UV−vis−NIR and Raman spectroscopy as a function of pressure to reveal a pressureinduced two-electron reduction of dicyanamide by Sm 2+ to cyanide and cyanamide and Sm 3+ between 5 and 8 GPa. High-pressure single-crystal diffraction studies reveal a phase change at 2.6 ± 0.1 GPa, where a polymorph exhibiting a smaller Sm 2+ ···N C bond angle and shorter Sm 2+ ···C distance was observed. These observations provide mechanistic insight into the reduction of dicyanamide into cyanide and cyanamide by pressurized samarium(II).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Saddle-Shaped Third Component with Out-of-Plane Electrostatic Dipole for Realizing High-Performance Photovoltaic Donor Terpolymers

Terpolymer fabrication is an effective methodology for molecular engineering and generating high-performance organic photovoltaic materials to construct highly efficient polymer solar cells. Modification of the polymer PM6 by incorporating a third component resulting in the formation of a ternary copolymer is reported to outperform PM6 in achieving enhanced device performances. However, one of the major challenges in constructing high-performance terpolymers is to counter the molecular disorder caused by the backbone entropy induced by the third moiety. Here, in this work, double B←N bridged bipyridine (BNBP) is used as the third component, which possesses a strong out-of-plane electrostatic dipole owing to the saddle-shaped B←N fused ring structure. The out-of-plane dipole moment introduced in the modified PM6 terpolymer can be used as a means for tuning and optimizing the nanostructures of the blended films. The prepared PM6-BNBP-4 blend polymer with 4% of the benzodithiophene dione monomers replaced by BNBP results in excellent power conversion efficiency of 19.13%. This work demonstrates that the out-of-plane electrostatic dipole moment in saddle-shaped molecules is valuable for achieving high-performance organic photovoltaic donor materials.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fused perylene diimide-based polymeric acceptors with different $\mathcal{π}$-conjugation and molecular conformation in all polymer solar cells

Two perylene diimide (PDI) based polymeric acceptors, PFPDIBT-TT2F and PFPDIT-TT2F, which consist of fused-PDI moieties (FPDIBT and FPDIT) and 3,3'-difluoro-2,2'-bithiophene (TT2F) units, has been designed and synthesized. Compared with the unfused-PDI polymer (PPDI-TT2F) as the control molecule, the influence of structural conformation and π-conjugation extension on the performance of all-polymer solar cells has been investigated. Due to both the extended π-conjugation and the torsional polymer skeleton, the device adopting PFPDIT-TT2F achieved an obviously improved PCE of 5.11% comparing with the devices using the other two polymeric acceptors. This study demonstrates that the fused PDIs bridged by a thiophene enables both extended π-conjugation and twisted molecular conformation, and the latter plays a dominant role in the improvement of device performance.

42 ENGINEERING↗
DOE OSTI2023

Americium Oxalate: An Experimental and Computational Investigation of Metal–Ligand Bonding

A novel actinide-containing coordination polymer, [Am(C 2 O 4 )(H 2 O) 3 Cl] (Am-1), has been synthesized and structurally characterized. The crystallographic analysis reveals that the structure is two-dimensional and comprised of pseudo-dimeric Am 3+ nodes that are bridged by oxalate ligands to form sheets. Each metal center is nine-coordinate, forming a distorted capped square antiprism geometry with a C 1 symmetry, and features bound oxalate, aqua, and chloro ligands. The Am 3+ –ligand bonds were probed computationally using the quantum theory of atoms in molecules nd natural localized molecular orbital approaches to investigate the underlying mechanisms and hybrid atomic orbital contributions therein. The analyses indicate that the bonds within Am-1 are predominantly ionic and the 5f shell of the Am 3+ metal centers does not add a significant covalent contribution to the bonds. Further, our bonding assessment is supported by measurements on the optical properties of Am-1 using diffuse reflectance and photoluminescence spectroscopies. The position of the principal absorption band at 507 nm ( 5 L 6' ← 7 F 0' ) is notable because it is consistent with previously reported americium oxalate complexes in solution, indicating similarities in the electronic structure and ionic bonding. Compound Am-1 is an active phosphor, featuring strong bright-blue oxalate-based luminescence with no evidence of metal-centered emission.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Aqueous ion partitioning in Nafion: Applicability of Manning's counter-ion condensation theory

Nafion is a well-studied polymer of significant interest as a fuel cell membrane due to rapid transport of protons, which is often ascribed, at least in part, to its phase-separated morphology. The literature detailing ion sorption and transport in Nafion diverges considerably from that of water purification membranes, with contrasting analyses and models. To help bridge these gaps and facilitate comparisons of membranes with various structures, this study presents measurements of ion activity coefficients and sorption in Nafion 117 equilibrated with aqueous solutions of NaCl, MgCl 2 , and Na 2 SO 4 , which are relevant to water purification. The experimental data are compared to a theoretical framework based on Manning's counter-ion condensation theory and Donnan theory. Good agreement between the model and data is observed for NaCl and MgCl 2 , using no adjustable parameters. However, the model significantly underpredicts Na 2 SO 4 solubility, which is attributed to ion pairing effects. Furthermore, the results highlight the general applicability of counter-ion condensation theory to highly charged polymers, including those exhibiting nanoscale ordering, while revealing fundamental limitations related to ion pairing.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Understanding and Manipulating Counterion Condensation within Charged Polymer Electrolytes for Selective and Low Resistant Membrane Separations

Polymeric ion-exchange membranes are found at the heart of numerous electrochemical systems spanning separations (electrodialysis and membrane capacitive deionization) and energy conversion and storage (flow batteries, fuel cells, and electrolyzers). The ion-exchange membrane separators need to be ion conducting but electron insulating, and in many scenarios selective for a particular ion to conduct. Because of their polymeric nature, the molecular architectures of ion-exchange membranes lack the molecular precision found in many inorganic materials. Plus, they contain numerous structural defects that impede ionic transport. As a result of their poor structure, it has been difficult to carefully probe the underlying physics that governs ion transport in ion-exchange membranes. We investigated counterion condensation phenomena in ion-exchange membranes and correlated it to bulk ionic charge transport and selectivity in precisely defined and long-range ordered materials afforded through the principles of directed self-assembly. A multi-faceted approach spanning i.) advanced metrology, two-dimensional atomic force microscopy, x-ray scattering, and ion-exchange equilibria, and ii.) molecular simulations (classical molecular dynamics and ab-inito molecular dynamics) that bridge multiple time and length scales, were employed to correlate the extent of counterion condensation to ionic conductivity and selectivity. After uncovering the extent of the condensation phenomena in this project, new macromolecular chemistries were employed to manipulate the ion pairing interactions of the condensed counterions to tethered ions on the polymer backbone so more facile and selective conduction rates can be attained. The research has aided in the rational design of polymeric ion-exchange membrane separators with high current density for electrochemical systems and subsequently better energy efficiency.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Quantum Accurate Prediction of Plutonium–Plutonium Dihydride Phase Equilibrium Using a Lattice Gas Model

Plutonium-based materials are vital for use as nuclear fuels and as portable power sources for space vehicles. However, elucidating their sensitivity to hydriding corrosion represents an extreme challenge because of the toxicity of Pu as well as their anomalous magnetic properties. In this work, we develop a lattice gas model of plutonium–plutonium dihydride (Pu–PuH 2 ) phase equilibrium that retains the accuracy of density functional theory, while yielding many orders of magnitude improvement in computational efficiency. Using Monte Carlo and free-energy sampling algorithms, we compute a number of Pu–PuH 2 equilibrium properties that are difficult to probe experimentally, including equilibrium pressures and phase compositions and the PuH 2 heat of formation. In conclusion, our method will have particular impact on these types of materials studies, where there is a strong need for computationally efficient approaches to bridge time and length scale gaps between quantum calculations and experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Bridging the thermodynamics and kinetics of temperature-induced morphology evolution in polymer/fullerene organic solar cell bulk heterojunction

The performance of organic solar cells (OSC) critically depends on the morphology of the active layer. After deposition, the active layer is in a metastable state and prone to changes that lead to cell degradation. Here, a high efficiency fullerene:polymer blend is used as a model system to follow the temperature-induced morphology evolution through a series of thermal annealing treatments. Electron microscopy analysis of the nano-scale phase evolution during the early stages of thermal annealing revealed that spinodal decomposition, i.e. spontaneous phase separation with no nucleation stage, is possibly responsible for the formation of a fine scale bicontinuous structure. In the later evolution stages, large polycrystalline fullerene aggregates are formed. Optical microscopy and scattering revealed that aggregate-growth follows the Johnson–Mehl–Avrami–Kolmogorov equation indicating a heterogeneous transformation process, i.e., through nucleation and growth. These two mechanisms, spinodal decomposition vs. nucleation and growth, are mutually exclusive and their co-existence is surprising. This unexpected observation is resolved by introducing a metastable monotectic phase diagram and showing that the morphology evolution goes through two distinct and consecutive transformation processes where spinodal decomposition of the amorphous donor:acceptor blend is followed by nucleation and growth of crystalline acceptor aggregates. Lastly, this unified thermodynamic and kinetic mechanism allows us to correlate the morphology evolution with OSC degradation during thermal annealing.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Asymmetric Miktoarm Star Polymers as Polyester Thermoplastic Elastomers

A library of polyester-based A(BA') n asymmetric miktoarm star polymers was synthesized with A, A' = poly(l-lactide) (PLLA) as the semicrystalline hard blocks and B = poly(4-methylcaprolactone) (PMCL) as the soft segment using a grafting-through platform known as μSTAR. The synthetic versatility of μSTAR enabled a systematic investigation of architectural design parameters, in particular the number of BA' arms (n), while holding the A, A', and B block lengths constant. The value of n has a pronounced impact on the mechanical properties of these high-molecular-weight miktoarm materials. Tensile toughness increases with n, an effect likely related to bridging, as the modulus drops because the hard-block volume fraction decreases. Furthermore, these insights expand our understanding of architecture effects in sustainable thermoplastic elastomers.

36 MATERIALS SCIENCE↗