SEARCH · Search NASA

Results for “pressure gradient force”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

NASA NTRS2016

Thermal Ablation Modeling for Silicate Materials

A general thermal ablation model for silicates is proposed. The model includes the mass losses through the balance between evaporation and condensation, and through the moving molten layer driven by surface shear force and pressure gradient. This model can be applied in the ablation simulation of the meteoroid and the glassy ablator for spacecraft Thermal Protection Systems. Time-dependent axisymmetric computations are performed by coupling the fluid dynamics code, Data-Parallel Line Relaxation program, with the material response code, Two-dimensional Implicit Thermal Ablation simulation program, to predict the mass lost rates and shape change. The predicted mass loss rates will be compared with available data for model validation, and parametric studies will also be performed for meteoroid earth entry conditions.

Ablation↗

NASA NTRS2016

Thermal Ablation Modeling for Silicate Materials

A thermal ablation model for silicates is proposed. The model includes the mass losses through the balance between evaporation and condensation, and through the moving molten layer driven by surface shear force and pressure gradient. This model can be applied in ablation simulations of the meteoroid or glassy Thermal Protection Systems for spacecraft. Time-dependent axi-symmetric computations are performed by coupling the fluid dynamics code, Data-Parallel Line Relaxation program, with the material response code, Two-dimensional Implicit Thermal Ablation simulation program, to predict the mass lost rates and shape change. For model validation, the surface recession of fused amorphous quartz rod is computed, and the recession predictions reasonably agree with available data. The present parametric studies for two groups of meteoroid earth entry conditions indicate that the mass loss through moving molten layer is negligibly small for heat-flux conditions at around 1 MW/cm(exp. 2).

Ablators↗

NASA NTRS1990

Upward ion flow in ionospheric holes on Venus

The nature of ion flow within two ionospheric holes on the nightside of Venus was investigated using ion composition measurements made by the ion mass spectrometer on the Pioneer Venus Orbiter. A comparison of the altitude profiles of the observed ion densities with those expected under diffusive equilibrium conditions indicates that the major ions O(+), NO(+), and O2(+), as well as the minor ions H(+) and He(+) flow upward and away from Venus along the axes of the holes. This result agrees with a quantitative evaluation of the ion flow speeds appearing in expressions derived from the equations for conservation of mass and momentum of the ions and electrons. The analysis shows that all ion species flow upward in the holes because the upward force produced by the plasma pressure gradient exceeds all downward forces. However, the nature of the ion source required to maintain such flow is not known.

Hartle, R. E.↗

NASA NTRS1981

Anti-solar acceleration of ionospheric plasma across the Venus terminator

It is demonstrated that the horizontal ionospheric particle pressure gradient across the Venus terminator is the principal body force accelerating the plasm to the observed anti-solar velocity. The large scale horizontal electromagnetic body force is typically an order of magnitude smaller than the particle pressure gradient. The viscous body forces above 300 km - drag or acceleration - are also an order of magnitude smaller than the pressure gradient body force. In the immediate vicinity of the ionopause where the ionospheric plasma density decreases below 1000 ions/cu cm and the magnetic field strength increases, the electromagnetic body force may become significant. The electromagnetic body force may also be significant in the nightside ionosphere. The bulk of the ionospheric flow momentum is not derived from the ionosheath momentum.

Knudsen, W. C.↗

NASA NTRS1993

Dynamics of aging magnetic clouds

The dynamics of radially expanding magnetic clouds is rigorously analyzed within the framework of ideal MHD. The cloud is modelled as a cylindrically symmetric magnetic flux rope. In the force balance we include the gas pressure gradient and the Lorentz force. Interaction with the ambient solar wind due to expansion of the magnetic cloud is represented by a drag force proportional to the bulk velocity. We consider the self-similar expansion of a polytrope, and reduce the problem to an ordinary nonlinear differential equation for the evolution function. Analyzing the asymptotic behavior of the evolution function, we formulate theoretical expectations for the long-term behavior of cloud parameters. We focus on the temporal evolution of (1) the magnetic field strength; (2) the twist of the field lines; (3) the asymmetry of the total field profile; and (4) the bulk flow speed. We present data from two magnetic clouds observed at 1 AU and 2 AU, respectively, and find good agreement with theoretical expectations. For a peak magnetic field strength at 1 AU of 25 nT and a polytropic index of 0.5, we find that a magnetic cloud can be distinguished from the background interplanetary field up to a distance of about 5 AU. Taking larger magnetic fields and bigger polytropic indices this distance can double.

Osherovich, V. A.↗

NASA NTRS2006

Using Electrostriction to Manipulate Ullage in Microgravity

A report proposes to use electrostriction to manipulate the ullage in a tank containing a dielectric liquid in a microgravitational environment. In the original intended application, the liquid would be a spacecraft propellant and the goal would be to force the ullage (comprising bubbles of noncondensible gas) to coalesce at one end of the tank, to enable use of one of the established means of (1) measuring the position of the gas/liquid interface and (2) inferring the quantity of liquid from the measurement. Electrically insulated wires would be installed in the tank, shaped and positioned so that application of a suitably high potential (e.g., 1 kV) between adjacent wires in successive pairs would give rise to a sufficient electric field gradient along the tank. The resulting electrostriction in the liquid would give rise to a pressure gradient that would force the ullage toward the low-electric-field-magnitude end of the tank. The feasibility of this proposal was demonstrated in an experiment in a tank containing liquid helium aboard an airplane flying a low-gravity arc. The ullage-segregating electrostrictive effect is expected to be considerably greater in other liquids.

Chui, Talso↗

NASA NTRS1981

A gravity gradient stabilized solar power satellite design

The concept of a solar power satellite (SPS) is reviewed, and a design proposed for such a satellite taking advantage of solar radiation pressure and gravity gradient forces to eliminate much of the structure from the baseline configuration. The SPS design consists of a solar cell array lying in the orbital plane and a free floating mirror above to reflect sunlight down onto it. The structural modes of the solar cell array are analyzed and found to be well within control limitations. Preliminary calculations concerning the free floating mirror and its position-keeping propellant requirements are also performed. A numerical example is presented, which shows that, even in terms of mass only, this configuration is a competitive design when compared to the conventional Department of Energy reference design. Other advantages, such as easier assembly in orbit, lower position-keeping propellant requirements, possibilities for decreasing necessary solar cell area, and longer solar cell life, may make this design superior.

Bowden, M. L.↗

NASA NTRS1983

On the field configuration in magnetic clouds

Interplanetary magnetic clouds are represented by cylindrically symmetric equilibrium solutions of the MHD equations. The radial magnetic pressure gradient of the force free field is balanced by the curvature stress. The field inside is essentially parallel to the cylinder axis, far outside it is oriented in azimuthal direction. These configurations therefore differ from the nonselfconsistent model where the field lines are tightly wound even near the axis.

Goldstein, H.↗

NASA NTRS1988

Analytical models of helical wind-type astrophysical flows

Three classes of analytic solutions of the basic hydrodynamic equations assumed to govern plasma flow in the atmosphere of a rotating astrophysical object are presented. Attention is focused on the balance of the inertial and gravitational forces with suitable pressure gradients in the presence of rotation. The solutions are written in terms of dimensionless physical parameters in order to facilitate their direct application to specific astrophysical flows, such as winds from massive premain sequence objects and T Tauri stars, and bipolar flows in young stellar objects.

Tsinganos, K.↗

NASA NTRS1990

Vertical velocities and momentum fluxes derived from wind measurements in the dusk auroral oval

Results are presented on a chemical release experiment carried out on March 20, 1985 in connection with NASA's Cooperative Observations of Polar Electrodynamics I campaign. Simultaneous neutral wind measurements in E region were carried out at three separate locations over a triangular region with sides of about 150 km in the dusk auroral oval, and the three wind profiles were used to calculate values of divergence and vorticity over the area. The vertical velocity over the hight range was calculated using the mass continuity equation, and the instantaneous vertical momentum fluxes in the E region were derived using the combination of horizontal-wind measurements and calculated vertical velocities. Results show that there is strong coupling between layers in the E region and that the momentum-flux-induced accelerations are at least comparable in magnitude to the pressure gradient and Coriolis force accelerations.

Larsen, M. F.↗

NASA NTRS1991

Fiber optic laser Doppler anemometry in swirling jets

Time-averaged and fluctuating quantities are measured in a free turbulent swirling jet. Data from a two-component laser Doppler anemometry (LDA) are compared to the measurements via hot-wire and 5-hole pitot probes. To acquire the proper seeding density near the axis of a swirling jet for LDA measurements proved difficult. This is due to an imbalance of the centrifugal force and radial pressure gradient, which throws the seeding material off the axis. Despite this problem, close agreement between various measurement techniques is obtained.

Taghavi, R.↗

NASA NTRS1993

A coupled subsurface-boundary layer model of water on Mars

A 1D numerical model of the exchange of H2O between the atmosphere and subsurface of Mars through the PBL is employed to explore the mechanisms of H2O exchange and to elucidate the role played by the regolith in the local H2O budget. The atmospheric model includes effects of Coriolis, pressure gradient, and frictional forces for momentum: radiation, sensible heat flux, and advection for heat. It is suggested that in most cases, the flux through the Martian surface reverses twice in the course of each sol. The effects of surface albedo, thermal inertia, solar declination, atmospheric optical depth, and regolith pore structure are explored. It is proposed that higher thermal inertia forces more H2O into the atmosphere because the regolith is warmer at depth.

Zent, Aaron P.↗

NASA NTRS1993

A boundary-layer model for Mars - Comparison with Viking lander and entry data

A 1D boundary-layer model of Mars based on a momentum equation that describes friction, pressure gradient, and Coriolis forces is presented. Frictional forces and convective heating are computed using the level-2 turbulence closure theory of Mellor and Yamada (1974). The model takes into account the radiative effects of CO2 gas and suspended dust particles. Both radiation and convection depend on surface temperatures which are computed from a surface heat budget. Model predictions are compared with available observations from Viking landers. It is concluded that, in general, the model reproduces the basic features of the temperature data. The agreement is particularly good at entry time for the V L-2 site, where the model and observations are within several degrees at all levels for which data are available.

Haberle, Robert M.↗

NASA NTRS2001

Laminarization of Turbulent Boundary Layer on Flexible and Rigid Surfaces

An investigation of the control of turbulent boundary layer flow over flexible and rigid surfaces downstream of a concave-convex geometry has been made. The concave-convex curvature induces centrifugal forces and a pressure gradient on the growth of the turbulent boundary layer. The favorable gradient is not sufficient to overcome the unfavorable; thus, the net effect is a destabilizing, of the flow into Gortler instabilities. This study shows that control of the turbulent boundary layer and structural loading can be successfully achieved by using localized surface heating because the subsequent cooling and geometrical shaping downstream over a favorable pressure gradient is effective in laminarization of the turbulence. Wires embedded in a thermally insulated substrate provide surface heating. The laminarized velocity profile adjusts to a lower Reynolds number, and the structure responds to a lower loading. In the laminarization, the turbulent energy is dissipated by molecular transport by both viscous and conductivity mechanisms. Laminarization reduces spanwise vorticity because of the longitudinal cooling gradient of the sublayer profile. The results demonstrate that the curvature-induced mean pressure gradient enhances the receptivity of the flow to localized surface heating, a potentially viable mechanism to laminarize turbulent boundary layer flow; thus, the flow reduces the response of the flexible structure and the resultant sound radiation.

Maestrello, Lucio↗

NASA NTRS2007

Projection Method for Flows with Large Density Variations

Numerical models of solidification including a mushy zone are notoriously inefficient; most of them are based on formulations that require the coupled solution of the velocity components in the momentum equation greatly restricting the range of applicability of the models. There are only two models known to the authors that have used a projection or fractional step formulation, but none of these were used to model problems of any significant size. A third model was only applied to a partial mushy zone with no all-fluid region. Our initial attempts at modeling directional solidification in the presence of a developing mushy zone using a projection formulation encountered very serious difficulties once solidification starts. These difficulties were traced to the inability of the method to deal with large local density differences in the vicinity of the fluid-mush interface. As a result, a modified formulation of the projection method has been developed, that maintains the coupling between the body force and the pressure gradient and is presented in this work. The new formulation is shown to be robust and efficient, and can be applied to problems involving very large meshes. This is illustrated in this work through its application to simulations involving Pb-Sb and Pb-Sn alloys.

Heinrich, Juan C.↗

NASA NTRS1986

Cosmic-ray shock acceleration in oblique MHD shocks

A one-dimensional, steady-state hydrodynamical model of cosmic-ray acceleration at oblique MHD shocks is presented. Upstream of the shock the incoming thermal plasma is subject to the adverse pressure gradient of the accelerated particles, the J x B force, as well as the thermal gas pressure gradient. The efficiency of the acceleration of cosmic-rays at the shock as a function of the upstream magnetic field obliquity and upstream plasma beta is investigated. Astrophysical applications of the results are briefly discussed.

Webb, G. M.↗

NASA NTRS1993

Direct simulation of isothermal-wall supersonic channel flow

The motivation for this work is the fact that in turbulent flows where compressibility effects are important, they are often poorly understood. A few examples of such flows are those associated with astrophysical phenomena and those found in combustion chambers, supersonic diffusers and nozzles, and over high-speed airfoils. For this project, we are primarily interested in compressibility effects near solid surfaces. Our main objective is an improved understanding of the fundamentals of compressible wall-bounded turbulence, which can in turn be used to cast light upon modeling concepts such as the Morkovin hypothesis and the Van Driest transformation. To this end, we have performed a direct numerical simulation (DNS) study of supersonic turbulent flow in a plane channel with constant-temperature walls. All of the relevant spatial and temporal scales are resolved so that no sub grid scale or turbulence model is necessary. The channel geometry was chosen so that finite Mach number effects can be isolated by comparing the present results to well established incompressible channel data. Here the fluid is assumed to be an ideal gas with constant specific heats, constant Prandtl number, and power-law temperature-dependent viscosity. Isothermal-wall boundary conditions are imposed so that a statistically stationary state may be obtained. The flow is driven by a uniform (in space) body force (rather than a mean pressure gradient) to preserve stream wise homogeneity, with the body force defined so that the total mass flux is constant.

Coleman, Gary N.↗

NASA NTRS1987

Evanescent pressure gradient response in the upper ocean to subinertial wind stress forcing of finite wavelength

A schematic model is used to interpret field observations related to the mixed layer response to wind stress at subinertial frequencies. It is shown that subinertial density and pressure fluctuations can arise locally from the finite wavelength character of the wind stress forcing as a fundamental part of the upper ocean transient, wind-driven response on time scales of 2-10 pendulum days. Evanescent vertical motions arise which alter the density field of the pycnocline, and hence the pressure field over the entire upper ocean. It is thus found that in the real ocean driven by wind stress, a transient geostrophic response exists which can be as large or larger than the transient Eckman response.

White, Warren B.↗