Results for “products comparison” — Page 4

DOE OSTI2023

Energy dependence of light hypernuclei production in heavy-ion collisions from a coalescence and statistical-thermal model perspective

A comparison of light hypernuclei production, from Ultra-relativistic Quantum Molecular Dynamics (UrQMD)+coalescence and the thermal model, in heavy ion collisions over a wide range of beam energies and system sizes is presented. We find that both approaches provide generally similar results, with differences in specific details. Especially the ratios of hypertriton to Λ are affected by both the source radius Δr of the coalescence procedure as well as canonical effects. On the other hand, the double ratio S 3 is almost independent of canonical effects, which is in contrast to coalescence. Thus, both the beam energy dependence and centrality dependence of S 3 can be used to constrain the hypertriton source radius. To do so the currently available data are not yet sufficient. Elliptic flow is shown to be unaffected by the source size of the nuclei and an almost perfect mass scaling of the elliptic flow is observed. Furthermore, our predictions further suggest that the existence of the H-dibaryon(ΛΛ) seems ruled out by ALICE data.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2022

Evaluating seasonal and regional distribution of snowfall in regional climate model simulations in the Arctic

In this study, we investigate how the regional climate model HIRHAM5 reproduces the spatial and temporal distribution of Arctic snowfall when compared to CloudSat satellite observations during the examined period of 2007–2010. For this purpose, both approaches, i.e., the assessments of the surface snowfall rate (observation-to-model) and the radar reflectivity factor profiles (model-to-observation), are carried out considering spatial and temporal sampling differences. The HIRHAM5 model, which is constrained in its synoptic representation by nudging to ERA-Interim, represents the snowfall in the Arctic region well in comparison to CloudSat products. The spatial distribution of the snowfall patterns is similar in both identifying the southeastern coast of Greenland and the North Atlantic corridor as regions gaining more than twice as much snowfall as the Arctic average, defined here for latitudes between 66 and 81°N. Excellent agreement (difference less than 1%) in the Arctic-averaged annual snowfall rate between HIRHAM5 and CloudSat is found, whereas ERA-Interim reanalysis shows an underestimation of 45% and significant deficits in the representation of the snowfall rate distribution. From the spatial analysis, it can be seen that the largest differences in the mean annual snowfall rates are an overestimation near the coastlines of Greenland and other regions with large orographic variations as well as an underestimation in the northern North Atlantic Ocean. To a large extent, the differences can be explained by clutter contamination, blind zone or higher resolution of CloudSat measurements, but clearly HIRHAM5 overestimates the orographic-driven precipitation. The underestimation of HIRHAM5 within the North Atlantic corridor south of Svalbard is likely connected to a poor description of the marine cold air outbreaks which could be identified by separating snowfall into different circulation weather type regimes. By simulating the radar reflectivity factor profiles from HIRHAM5 utilizing the Passive and Active Microwave TRAnsfer (PAMTRA) forward-modeling operator, the contribution of individual hydrometeor types can be assessed. Looking at a latitude band at 72–73°N, snow can be identified as the hydrometeor type dominating radar reflectivity factor values across all seasons. The largest differences between the observed and simulated reflectivity factor values are related to the contribution of cloud ice particles, which is underestimated in the model, most likely due to the small sizes of the particles. The model-to-observation approach offers a promising diagnostic when improving cloud schemes, as illustrated by comparison of different schemes available for HIRHAM5.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Catalyst design to direct high-octane gasoline fuel properties for improved engine efficiency

The paraffin-to-olefin (P/O) ratio in gasoline fuel is a critical metric affecting fuel properties and engine efficiency. In the conversion of dimethyl ether (DME) to high-octane hydrocarbons over BEA zeolite catalysts, the P/O ratio can be controlled through catalyst design. Here, we report bimetallic catalysts that balance the net hydrogenation and dehydrogenation activity during DME homologation. The Cu-Zn/BEA catalyst exhibited greater relative dehydrogenation activity attributed to higher ionic site density, resulting in a lower P/O ratio (6.6) versus the benchmark Cu/BEA (9.4). The Cu-Ni/BEA catalyst exhibited increased hydrogenation due to reduced Ni species, resulting in a higher P/O ratio (19). The product fuel properties were estimated with an efficiency merit function and compared against finished gasolines and a typical alkylate blendstock. Merit values for the hydrocarbon product from all three BEA catalysts exceeded those of the comparison fuels (0–5.3), with the product from Cu-Zn/BEA exhibiting the highest merit value (9.7).

Catalyst design↗

DOE OSTI2025

Ammonia Synthesis under Ambient Conditions: Insights into Water–Nitrogen–Magnetite Interfaces

New routes for transforming nitrogen into ammonia at ambient conditions would be a milestone toward an energy efficient and economically attractive production route in comparison to the traditional Haber-Bosch process. Recently, the synthesis of ammonia from water and nitrogen at room temperature and atmospheric pressure has been reported to be catalyzed by Fe 3 O 4 at the air-water interface. By integrating ambient pressure X-ray photoelectron spectroscopy and ab initio molecular dynamics and free energy calculations, we investigate the underlying thermodynamic mechanisms governing ammonia and hydrazine formation at the water-Fe 3 O 4 -nanoparticle interface. Here, we find that, unlike pure Fe 3 O 4 where N 2 can only interact with a limited number of Fe sites, hydroxylated species introduce large and diverse adsorption geometries where N 2 can bind through either Fe sites or Fe-OH groups, each of which are capable of independently facilitating proton-coupled electron transfer.

Chandy, Sruthy K. [University of California, Berke↗

DOE OSTI2023

AmeriFlux BASE data pipeline to support network growth and data sharing

Abstract AmeriFlux is a network of research sites that measure carbon, water, and energy fluxes between ecosystems and the atmosphere using the eddy covariance technique to study a variety of Earth science questions. AmeriFlux’s diversity of ecosystems, instruments, and data-processing routines create challenges for data standardization, quality assurance, and sharing across the network. To address these challenges, the AmeriFlux Management Project (AMP) designed and implemented the BASE data-processing pipeline. The pipeline begins with data uploaded by the site teams, followed by the AMP team’s quality assurance and quality control (QA/QC), ingestion of site metadata, and publication of the BASE data product. The semi-automated pipeline enables us to keep pace with the rapid growth of the network. As of 2022, the AmeriFlux BASE data product contains 3,130 site years of data from 444 sites, with standardized units and variable names of more than 60 common variables, representing the largest long-term data repository for flux-met data in the world. The standardized, quality-ensured data product facilitates multisite comparisons, model evaluations, and data syntheses.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2022

Benchmark eA generator for leptoproduction in high-energy lepton-nucleus collisions

The upcoming electron-ion collider (EIC) will address several outstanding puzzles in modern nuclear physics. Topics such as the partonic structure of nucleons and nuclei, the origin of their mass and spin, among others, can be understood via the study of high-energy electron-proton (ep) and electron-nucleus (eA) collisions. Achieving the scientific goals of the EIC will require a novel electron-hadron collider and detectors capable to perform high-precision measurements but also dedicated tools to model and interpret the data. To aid in the latter, we present a general-purpose e A Monte Carlo generator—BeAGLE. In this paper, we provide a general description of the models integrated into BeAGLE, applications of BeAGLE in eA physics, implications for detector requirements at the EIC, and the tuning of the parameters in BeAGLE based on available experimental data. Specifically, we focus on a selection of model and data comparisons in particle production in both ep and eA collisions, where baseline particle distributions provide essential information to characterize the event. In addition, we investigate the collision geometry determination in eA collisions, which could be used as an experimental tool for varying the nuclear density.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

Oxygen Reduction on Platinum-Nickel and Platinum-Cobalt Alloy Based Catalysts for High Temperature Proton Exchange Membrane Fuel Cells

Catalyst layers, with commercial PtNi/TKK (TECNiE52; platinum 46.5 wt%), PtCo/TKK (TEC36E52; platinum 45.8 wt%) catalysts, and an in-house catalyst PtNi-NC (platinum 38.4 wt%), synthesised using acoustic mixer and a tube furnace, are prepared using three different ionomers: 20 wt% Nafion®, 60 wt% polytetrafluoroethylene (PTFE), and an in-house 5 wt% ionomer (‘Ionomer X’). These inks are bar-coated onto carbon paper gas diffusion layers (GDLs), which are cut into 3 cm × 5 cm pieces. The coated layers are tested for oxygen reduction in a commercial gas diffusion electrode (GDE) test cell, FlexCell® (Gaskatel GmbH, Germany), using 85 wt% phosphoric acid at both room temperature and at 155°C. This study evaluates the polynorbornene (PNB)-based in-house ionomer performance as binder and in-house catalyst oxygen reduction reaction (ORR) activity in comparison to commercial products. The catalyst layers are characterised using X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Among the catalyst layers prepared with PTFE ionomer and tested at 155°C, the in-house catalyst demonstrates the highest ORR activity. Ionomer X proves to be a good candidate to be used as a per- and polyfluoroalkyl-free binder for high-temperature (HT) proton exchange membrane fuel cell (PEMFC) applications.

85 wt% phosphoric acid↗

DOE OSTI2022

Proceedings of RIKEN BNL Research Center Workshop: Predictions for sPHENIX [Slides]

To complete the RHIC mission, sPHENIX was specifically designed to measure jet and heavy-flavor observables with a level of precision not previously achievable at RHIC. This will enhance our understanding of the quark-gluon plasma (QGP) properties and their temperature dependence beyond what is possible with existing and planned data from the LHC and other RHIC experiments. A major goal of the sPHENIX program is to address the question of the approach to thermalization of the quark-gluon plasma and its transport properties using hard probes such as jets and heavy flavor. The current three-year run plan includes Au+Au, p+Au and p+p collisions at 200 GeV. The Au+Au dataset provides a large QGP system to study the QGP properties. The p+Au dataset will allow for additional studies of the intriguing behavior observed in flow measurements from other RHIC experiments as well as transport properties of cold QCD matter and proton/nuclear structure. The p+p collisions provide a necessary reference for Au+Au and p+Au collisions and also allow for additional studies of proton structure. Anticipated measurements include but are not limited to, jet substructure observables, photon and heavy flavor tagged jets as well as comparisons of the production of the different upsilon states in all three collision systems. To maximize the rich physics sPHENIX is capable of accessing, this workshop will enhance the discussions between the experimentalists making the measurements and the theorists whose models will be tested and constrained by the new data. Since sPHENIX will start taking data in early 2023, this workshop is timely for theorists wishing to make final predictions of anticipated observables before data collection commences. In addition, it will provide an opportunity for theorists and experimentalists to propose and discuss new observables.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2025

THz Radiation Generation to Enable Internal Magnetic Field Measurement of Burning Plasmas (Final Scientific Report)

A one-year experimental program was performed using the Multi-TeraWatt (MTW) laser at the Laboratory for Laser Energetics (LLE) to investigate the efficiency and physical process of laser-driven—wire THz generation. This process was evaluated as a potential high-repetition-rate source of powerful THz pulses for use in THz pulsed polarimetry of a moderate-density magnetic-confinement fusion concept developed by TAE. The goal was to develop a source for short pulses in the THz regime (150 μm wavelength) containing 10’s of mJ. The campaign tested the impact of Cu wire diameter (25, 75, 160 μm), length (250 – 750 μm), and laser irradiation orientation on THz production efficiency in comparison to 20-μm thick Cu foils. Of these targets, the 160 µm diameter, 750 µm long wires with sharpened tips and irradiated at the base were found to produce the highest energy and shortest wavelength THz pulses, exceeding 2.5 Joule/sr and meeting the requirements for the polarimetry diagnostic. The brightest THz signal was radiated in the direction of the sharpened wire tip. A combination of two models – a traveling wave antenna combined with coherent transition radiation – describes the emission pattern, pulse energy, and spectrum observed in the experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies

This presentation provides a deep dive overview of the NETL report publication "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies" released in April 2022. A summary of the study justification, objectives, and approach are presented along with a detailed overview of the major study phases and results.

Lewis, Eric↗

DOE OSTI2020

Characterization and Analysis of the Energy-Reporting Accuracy of Connected Devices

Emerging energy-efficient building systems increasingly exhibit greater functionality, often requiring multiple operating modes (e.g. white-tunability for lighting products and data traffic for devices with networked, integrated sensors). This increased functionality makes energy consumption estimates more complex. Given that these functions consume energy, the energy performance of such building systems is dependent on what operating modes they use and how much time they spend in each mode. Devices and systems that can report their own energy consumption mitigate this energy-performance uncertainty. This study explores the energy-reporting accuracy of market-available connected electrical outlets. The study considers two residential-market products (five units each, one outlet per unit) and three commercial-market products (two units each, 18 to 24 outlets per unit) with the ability to report power drawn and/or energy consumed by devices connected to their receptacles. The products were purchased through typical market channels. Pacific Northwest National Laboratory (PNNL) conducted testing in December 2018 at its Connected Lighting Test Bed (CLTB), using a custom-developed test setup and method adapted from industry standards. The setup collected energy-consumption data reported by the outlet devices under test (DUTs) at one-minute intervals and compared that data with measurements taken by a reference meter over a range of test conditions. The residential products reported power draw but not interval or cumulative energy consumption. The commercial products reported both power draw and cumulative energy consumption. Relative reporting error (RRE) was calculated for all measurements, and analysis of the results revealed variations across devices and test conditions. The total number of measurements (50 for each residential product, 60 for each commercial product) offers an appreciable comparison of performance at the make/model level. The average RRE of the residential products derived from reported power draw was -0.02% and -1.20%. The average RRE for two of the three the commercial products derived from reported power draw was worse than those of the residential products (-2.40%, -2.72%, -0.36%). The internal integration of power over time, used to calculate cumulative energy consumption, typically occurs at current and voltage sampling rates much higher than once per minute. This suggests that the average commercial-product RRE derived from reported energy consumption should be very consistent and better than performance based on reported power draw. However, the RRE derived from reported energy consumption varied significantly across the three makes of commercial-market products and was uniformly less accurate than performance based on reported power draw. Subsequent analysis identified a number of root causes for this decrease in performance, most of which were related to reporting resolution. The goals of this study are to generate awareness of building systems capable of reporting their own energy consumption, further interest in the value of energy data for a variety of uses, draw attention to how the accuracy of reported metrics can be characterized, and quantify the performance variation found in marketavailable products. The results of this study and subsequent related work may be relevant to stakeholders in industry-specification and standards-development organizations. The methods this study employs could inform test and measurement procedures and performance classifications for connected outlets, lighting products, and other building systems capable of reporting their own energy consumption. The study concludes with stakeholder recommendations, including the following: • Energy-reporting device and system manufacturers developing products that report energy consumption should characterize the accuracy of reported metrics using a reference meter calibrated by an independent laboratory that was accredited by an ILAC MRA signatory (and whose scope of accreditation explicitly covers energy measurement), and should include this information on product data sheets. • Standards and specification development organizations should develop application-specific performance classifications that end users can understand and relate to their energy-data use needs (e.g., 2% accuracy class for utility streetlight energy billing needs, or 10% accuracy class for ESCO performance verification needs). • Current or potential owners, operators, and specifiers of energy-reporting building systems should rigorously analyze the dependency of current and planned energy-data use cases on accuracy, noting in particular the dependence (or lack thereof) on relative vs. absolute accuracy, and on trueness vs. precision (i.e., repeatability), and should communicate use-case needs to industry standards and specification organizations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Characterization and Analysis of the Energy-Reporting Accuracy of Connected Devices

Emerging energy-efficient building systems increasingly exhibit greater functionality, often requiring multiple operating modes (e.g. white-tunability for lighting products and data traffic for devices with networked, integrated sensors). This increased functionality makes energy consumption estimates more complex. Given that these functions consume energy, the energy performance of such building systems is dependent on what operating modes they use and how much time they spend in each mode. Devices and systems that can report their own energy consumption mitigate this energy-performance uncertainty. This study explores the energy-reporting accuracy of market-available connected electrical outlets. The study considers two residential-market products (five units each, one outlet per unit) and three commercial-market products (two units each, 18 to 24 outlets per unit) with the ability to report power drawn and/or energy consumed by devices connected to their receptacles. The products were purchased through typical market channels. Pacific Northwest National Laboratory (PNNL) conducted testing in December 2018 at its Connected Lighting Test Bed (CLTB), using a custom-developed test setup and method adapted from industry standards. The setup collected energy-consumption data reported by the outlet devices under test (DUTs) at one-minute intervals and compared that data with measurements taken by a reference meter over a range of test conditions. The residential products reported power draw but not interval or cumulative energy consumption. The commercial products reported both power draw and cumulative energy consumption. Relative reporting error (RRE) was calculated for all measurements, and analysis of the results revealed variations across devices and test conditions. The total number of measurements (50 for each residential product, 60 for each commercial product) offers an appreciable comparison of performance at the make/model level. The average RRE of the residential products derived from reported power draw was -0.02% and -1.20%. The average RRE for two of the three the commercial products derived from reported power draw was worse than those of the residential products (-2.40%, -2.72%, -0.36%). The internal integration of power over time, used to calculate cumulative energy consumption, typically occurs at current and voltage sampling rates much higher than once per minute. This suggests that the average commercial-product RRE derived from reported energy consumption should be very consistent and better than performance based on reported power draw. However, the RRE derived from reported energy consumption varied significantly across the three makes of commercial-market products and was uniformly less accurate than performance based on reported power draw. Subsequent analysis identified a number of root causes for this decrease in performance, most of which were related to reporting resolution. The goals of this study are to generate awareness of building systems capable of reporting their own energy consumption, further interest in the value of energy data for a variety of uses, draw attention to how the accuracy of reported metrics can be characterized, and quantify the performance variation found in marketavailable products. The results of this study and subsequent related work may be relevant to stakeholders in industry-specification and standards-development organizations. The methods this study employs could inform test and measurement procedures and performance classifications for connected outlets, lighting products, and other building systems capable of reporting their own energy consumption. The study concludes with stakeholder recommendations, including the following: • Energy-reporting device and system manufacturers developing products that report energy consumption should characterize the accuracy of reported metrics using a reference meter calibrated by an independent laboratory that was accredited by an ILAC MRA signatory (and whose scope of accreditation explicitly covers energy measurement), and should include this information on product data sheets. • Standards and specification development organizations should develop application-specific performance classifications that end users can understand and relate to their energy-data use needs (e.g., 2% accuracy class for utility streetlight energy billing needs, or 10% accuracy class for ESCO performance verification needs). • Current or potential owners, operators, and specifiers of energy-reporting building systems should rigorously analyze the dependency of current and planned energy-data use cases on accuracy, noting in particular the dependence (or lack thereof) on relative vs. absolute accuracy, and on trueness vs. precision (i.e., repeatability), and should communicate use-case needs to industry standards and specification organizations.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE OSTI2020

Side-reaction products identified for photo-nuclear production of 99 Mo

Production of 99 Mo by the 100 Mo (γ, n) 99 Mo reaction through the bremsstrahlung process using an electron accelerator is one of the feasible options currently pursued by several countries. In this work, we report experimental results on identification of side-reaction products after the irradiation of natural and enriched 100 Mo targets. Side-reaction products identified include various Mo, Nb and Zr isotopes. Comparison of experimentally determined reaction production rates with those determined based on theoretical cross-sections will be presented. Moreover, activation products formed due to presence of impurities introduced during the manufacturing of the Mo targets will also be discussed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

DOE OSTI2022

Molten salt electrolysis and room temperature ionic liquid electrochemical processes for refining rare earth metals: Environmental and economic performance comparison

Circularizing end of life products such as electronic waste can open a new source for rare earth elements (REEs) that will decrease the demand pressure on conventional virgin production. The last step to produce REEs consists of a refining process to convert rare earth oxide (REO) to REE metal. One promising technology is processing REO via a room temperature ionic liquid, which is characterized by low energy requirements in contrast to existing REEs extraction processes. In this work, life cycle and techno-economic assessments are performed and compared against molten salt electrolysis. Here, the results show that both processes have advantages and disadvantages in terms of environmental performance, and that they are similarly competitive in terms of economic performance. A breakeven analysis suggests that future research should focus on coupling the production of REOs with the refining processes to attempt to lower REO cost and make them economically feasible in the U.S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

In-medium $\Delta (1232)$ potential, pion production in heavy-ion collisions and the symmetry energy

Using the dcQMD transport model, the isoscalar and isovector in-medium potentials of the Δ (1232) baryon are studied and information regarding their effective strength is obtained from a comparison to experimental pion production data in heavy-ion collisions below 800 MeV/nucleon impact energy. The best description is achieved for an isoscalar potential moderately more attractive than the nucleon optical potential and a rather small isoscalar relative effective mass $m$$^{*}_{Δ}$ ≈ 0.45. For the isovector component only a constraint between the potential’s strength at saturation and the isovector effective mass difference can be extracted, which depends on quantities such as the slope of the symmetry energy and the neutron-proton effective mass difference. These results are incompatible with the usual assumption, in transport models, that the Δ (1232) and nucleon potentials are equal. The density dependence of symmetry energy can be studied using the high transverse momentum tail of pion multiplicity ratio spectra. Results are however correlated with the value of neutron-proton effective mass difference. Furthermore, this region of spectra is shown to be affected by uncertain model ingredients such as the pion potential or in-medium correction to inelastic scattering cross-sections at levels smaller than 10%. Extraction of precise constraints for the density dependence of symmetry energy above saturation will require experimental data for pion production in heavy-ion collisions below 800 MeV/nucleon impact energy and experimental values for the high transverse momentum tail of pion multiplicity ratio spectra accurate to better than 5%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2022

67 Cu Production Capabilities: A Mini Review

Is the 67 Cu production worldwide feasible for expanding preclinical and clinical studies? How can we face the ingrowing demands of this emerging and promising theranostic radionuclide for personalized therapies? This review looks at the different production routes, including the accelerator- and reactor-based ones, providing a comprehensive overview of the actual 67 Cu supply, with brief insight into its use in non-clinical and clinical studies. In addition to the most often explored nuclear reactions, this work focuses on the 67 Cu separation and purification techniques, as well as the target material recovery procedures that are mandatory for the economic sustainability of the production cycle. The quality aspects, such as radiochemical, chemical, and radionuclidic purity, with particular attention to the coproduction of the counterpart 64 Cu, are also taken into account, with detailed comparisons among the different production routes. Future possibilities related to new infrastructures are included in this work, as well as new developments on the radiopharmaceuticals aspects.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

DOE OSTI2021

Comparison of model predictions with measured proton-induced production of nickel and iridium isotopes

Calculations were performed to support method development for simultaneous production of Ni and Ir isotopes. Here, the work scope included development of the physical target, irradiation configuration, and post-irradiation radiochemical separations. The assumptions of predictive models previously developed were refined based upon the precise experimental configuration selected, including Os target material and a set of stacked targets for concurrent production of Ni and Ir isotopes. Model predictions of the reaction cross sections with EMPIRE 3.21 and implied isotopic yields are compared with proton beam irradiation measurements to refine model parameters and guide future experiments.

Isotope Production↗

DOE OSTI2020

The Cloud-resolving model Radar SIMulator (CR-SIM) Version 3.3: description and applications of a virtual observatory

Ground-based observatories use multi-sensor observations to characterize cloud and precipitation properties. One of the challenges is how to design strategies to best use these observations to understand these properties and evaluate weather and climate models. This paper introduces the Cloud resolving model Radar SIMulator (CR-SIM), which uses output from high-resolution cloud resolving models (CRMs) to emulate multi-wavelength, zenith-pointing, and scanning radar observables and multi-sensor (radar and lidar) products. CR-SIM allows direct comparison between an atmospheric model simulation and remote-sensing products using a forward-modeling framework consistent with the microphysical assumptions used in the atmospheric model. CR-SIM has the flexibility to easily incorporate additional microphysical modules, such as microphysical schemes and scattering calculations, and expand the applications to simulate multi-sensor retrieval products. In this paper, we present several applications of CR-SIM for evaluating the representativeness of cloud microphysics and dynamics in a CRM, quantifying uncertainties in radar-lidar integrated cloud products and multi-Doppler wind retrievals, and optimizing radar sampling strategy using observing system simulation experiments. These applications demonstrate the application of CR-SIM as a virtual observatory operator on high-resolution model output for a consistent comparison between model results and observations to aid interpretation of the differences and improve understanding of the representativeness errors due to the sampling limitations of the ground-based measurements. CR-SIM is licensed under the GNU GPL package and both the software and the user guide are publicly available to the scientific community.

54 ENVIRONMENTAL SCIENCES↗