Search NASA⌕ Search

SEARCH · Search NASA

Results for “protons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

The crystal structures of a chloride-pumping microbial rhodopsin and its proton-pumping mutant illuminate proton transfer determinants

Microbial rhodopsins are versatile and ubiquitous retinal-binding proteins that function as light-driven ion pumps, light-gated ion channels, and photosensors, with potential utility as optogenetic tools for altering membrane potential in target cells. Insights from crystal structures have been central for understanding proton, sodium, and chloride transport mechanisms of microbial rhodopsins. Two of three known groups of anion pumps, the archaeal halorhodopsins (HRs) and bacterial chloride-pumping rhodopsins, have been structurally characterized. Here we report the structure of a representative of a recently discovered third group consisting of cyanobacterial chloride and sulfate ion-pumping rhodopsins, the Mastigocladopsis repens rhodopsin (MastR). Chloride-pumping MastR contains in its ion transport pathway a unique Thr-Ser-Asp (TSD) motif, which is involved in the binding of a chloride ion. The structure reveals that the chloride-binding mode is more similar to HRs than chloride-pumping rhodopsins, but the overall structure most closely resembles bacteriorhodopsin (BR), an archaeal proton pump. The MastR structure shows a trimer arrangement reminiscent of BR-like proton pumps and shows features at the extracellular side more similar to BR than the other chloride pumps. We further solved the structure of the MastR-T74D mutant, which contains a single amino acid replacement in the TSD motif. We provide insights into why this point mutation can convert the MastR chloride pump into a proton pump but cannot in HRs. Our study points at the importance of precise coordination and exact location of the water molecule in the active center of proton pumps, which serves as a bridge for the key proton transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Nonresonant central exclusive production of charged-hadron pairs in proton-proton collisions at s = 13 TeV

The central exclusive production of charged-hadron pairs in p p collisions at a center-of-mass energy of 13 TeV is examined, based on data collected in a special high- β * run of the LHC. The nonresonant continuum processes are studied with the invariant mass of the centrally produced two-pion system in the resonance-free region, m π + π − < 0.7 or m π + π − > 1.8 GeV . Differential cross sections as functions of the azimuthal angle between the surviving protons, squared exchanged four-momenta, and m π + π − are measured in a wide region of scattered proton transverse momenta, between 0.2 and 0.8 GeV, and for pion rapidities | y | < 2 . A rich structure of interactions related to double-pomeron exchange is observed. A parabolic minimum in the distribution of the two-proton azimuthal angle is observed for the first time. It can be interpreted as an effect of additional pomeron exchanges between the protons from the interference between the bare and the rescattered amplitudes. After model tuning, various physical quantities are determined that are related to the pomeron cross section, proton-pomeron and meson-pomeron form factors, pomeron trajectory and intercept, and coefficients of diffractive eigenstates of the proton. © 2024 CERN, for the CMS and TOTEMs Collaboration 2024 CERN

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Hohlraum fields with monoenergetic proton radiography at OMEGA

A more complete understanding of laser-driven hohlraum plasmas is critical for the continued development and improvement of ICF experiments. In these hohlraums, self-generated electric and magnetic fields can play an important role in modifying plasma properties such as heat transport; however, the strength and distribution of electromagnetic fields in such hohlraums remain largely uncertain. To explore this question, we conducted experiments at the OMEGA laser facility, using monoenergetic proton radiography to probe laser-driven vacuum hohlraums. We then utilized reconstructive methods to recover information about proton deflections. To interpret these reconstructions, a new technique for detangling the contributions of electric and magnetic fields to proton deflections was developed. This work was supported in part by the U.S. Department of Energy, the National Laser Users’ Facility, and the Laboratory for Laser Energetics.

Pearcy, Jacob A. (ORCID:0000000155817219)↗
DOE OSTI2025

Challenges and Optimization of Mu2e Proton Target Design with Radiative Cooling

Mu2e, the Muon-to-Electron Conversion Experiment, aims to identify physics beyond the Standard Model, namely, the conversion of muons to electrons without the emission of neutrinos. The muons are produced from pions generated in a production target when it is hit by an 8 GeV proton beam from the Fermilab Booster/Main Injector. The proton target design space is strongly constrained by a one-year operating lifetime and the need for radiative cooling in a vacuum environment. Uncertainties in the lifetime of the existing baseline design – a monolithic, segmented tungsten target – are large, particularly due to unknown impacts of radiation damage at the very high proton fluences expected in the experiment. We have begun evaluation of a new design utilizing Inconel 718 over the WL10 used in the existing target design. As a result, the structural design of the target has evolved significantly. This evolution focuses on lowering the target temperature, minimizing obstruction to muons, increasing structural stability, maximizing fatigue lifetime, simplifying the fabrication process, and more. The thermal management, structural stability and fatigue lifetime are emphasized here. These optimizations have led to a promising new target design for the Mu2e experiment.

Liu, Z. [Fermilab]↗
DOE OSTI2022

Sensitivity to Dijet Resonances at Proton-Proton Colliders

A significant benchmark for discovery at a proton-proton collider is the sensitivity to a dijet resonance, X, the intermediate state of the s-channel process $pp \rightarrow X \rightarrow 2\mbox{ jets}$. To probe the highest resonance masses, hadron collider experiments have used the classic technique of searching for bumps in the mass spectrum of two individually resolved jets. In this Snowmass 2021 study, we explore the search sensitivity to multiple benchmark models of dijet resonances at current and future proton-proton colliders. We present the expected masses for $5\sigma$ discovery and 95% confidence level exclusion of diquarks, colorons, excited quarks, $W^{\prime}s$, $Z^{\prime}s$ and Randall-Sundrum gravitons, resulting from accumulation of integrated luminosities between 10 and $10^5$ fb$^{-1}$, at proton-proton colliders operating at energies $\sqrt{s}=$ 13, 14, 27, 75, 100, 150, 300 and 500 TeV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Energetic solar proton versus terrestrially trapped proton fluxes for the active years 1977 - 1983

Ratios of solar to trapped proton fluences were computed for circular-orbit, geocentric space missions to be flown during the active phase of the next solar cycle (1977-1983). The ratios are presented as functions of orbit altitude and inclination, mission duration, proton energy threshold, and the chance the mission planner is willing to take that the actually encountered solar proton fluence will exceed the design fluence provided by the statistical solar proton model. It is shown that the ratio is most sensitively dependent on orbit altitude and inclination, with trapped protons dominant for low inclination, low and mid altitude orbits and for high inclination, mid altitude orbits. Conversely, solar protons are dominant for high inclination, low altitude orbits, and for low and high inclination, high altitude orbits.

King, J. H.↗
NASA NTRS1976

Proton and deuteron double differential cross sections at angles from 10 deg to 60 deg from Be, C, Al, Fe, Cu, Ge, W, and Pb under 558-MeV-proton irradiation

The double differential cross sections for the production of protons and deuterons from targets of Be, C, Al, Fe, Cu, Ge, W, and Pb were obtained at laboratory angles of scatter of 10, 20, 30, 40, 50, and 60 degrees for 558-MeV incident protons. The position of the quasi-elastic peak, discernible in the cross sections up to approximately 40 degrees, corresponded closely to the theoretical predictions for proton-proton elastic scattering at 558 MeV. The mean ratio of deuteron to proton energy-integrated cross sections was 0.056 + or - 0.008. The dependence of energy-integrated cross sections for both protons and deuterons on target mass number A varied from A to the 1/3 power at 10 degrees to A to the 2/3 power above approximately 30 degrees. The ratio of energy-integrated deuteron cross sections for quasielastic processes to that for reactions yielding a deuteron-pi-meson pair was approximately 10 percent.

Beck, S. M.↗
NASA NTRS2002

A Generalized Weizsacker-Williams Method Applied to Pion Production in Proton-Proton Collisions

A new "Generalized" Weizsacker-Williams method (GWWM) is used to calculate approximate cross sections for relativistic peripheral proton-proton collisions. Instead of a mass less photon mediator, the method allows for the mediator to have mass for short range interactions. This method generalizes the Weizsacker-Williams method (WWM) from Coulomb interactions to GWWM for strong interactions. An elastic proton-proton cross section is calculated using GWWM with experimental data for the elastic p+p interaction, where the mass p+ is now the mediator. The resulting calculated cross sections is compared to existing data for the elastic proton-proton interaction. A good approximate fit is found between the data and the calculation.

Ahern, Sean C.↗
NASA NTRS2016

Mixing the Solar Wind Proton and Electron Scales: Effects of Electron Temperature Anisotropy on the Oblique Proton Firehose Instability

The double adiabatic expansion of the nearly collisionless solar wind plasma creates conditions for the firehose instability to develop and efficiently prevent the further increase of the plasma temperature in the direction parallel to the interplanetary magnetic field. The conditions imposed by the firehose instability have been extensively studied using idealized approaches that ignore the mutual effects of electrons and protons. Recently, more realistic approaches have been proposed that take into account the interplay between electrons and protons, unveiling new regimes of the parallel oscillatory modes. However, for oblique wave propagation the instability develops distinct branches that grow much faster and may therefore be more efficient than the parallel firehose instability in constraining the temperature anisotropy of the plasma particles. This paper reports for the first time on the effects of electron plasma properties on the oblique proton firehose (PFH) instability and provides a comprehensive vision of the entire unstable wave-vector spectrum, unifying the proton and the smaller electron scales. The plasma β and temperature anisotropy regimes considered here are specific for the solar wind and magnetospheric conditions, and enable the electrons and protons to interact via the excited electromagnetic fluctuations. For the selected parameters, simultaneous electron and PFH instabilities can be observed with a dispersion spectrum of the electron firehose (EFH) extending toward the proton scales. Growth rates of the PFH instability are markedly boosted by the anisotropic electrons, especially in the oblique direction where the EFH growth rates are orders of magnitude higher.

plasmas↗
DOE OSTI2024

Results on elastic cross sections in proton–proton collisions at $\sqrt{s}$ = 510 GeV with the STAR detector at RHIC

We report results on an elastic cross section measurement in proton–proton collisions at a center-of-mass energy $\sqrt{s}$ = 510 GeV, obtained with the Roman Pot setup of the STAR experiment at the Relativistic Heavy Ion Collider (RHIC). The elastic differential cross section is measured in the four-momentum transfer squared range 0.23 ≤ −t ≤ 0.67 GeV 2 . This is the only measurement of the proton-proton elastic cross section in this t range for collision energies above the Intersecting Storage Rings (ISR) and below the Large Hadron Collider (LHC) colliders. We find that a constant slope B does not fit the data in the aforementioned t range, and we obtain a much better fit using a second-order polynomial for B(t). This is the first measurement below the LHC energies for which the non-constant behavior B(t) is observed. The t dependence of B is also determined using six subintervals of t in the STAR measured t range, and is in good agreement with the phenomenological models. The measured elastic differential cross section dσ/dt agrees well with the results obtained at $\sqrt{s}$ = 540 GeV for proton–antiproton collisions by the UA4 experiment. We also determine that the integrated elastic cross section within the STAR t-range is σ$^{fid}_{el}$ = 462.1 ± 0.9(stat.) ± 1.1(syst.) ± 11.6(scale) μb.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Size-dependent femtosecond proton transfer in protonated methanol clusters

Methanol clusters (CH 3 OH) n are prototypical hydrogen-bonded systems that bridge isolated molecules and bulk liquid methanol. Strong-field ionization of these clusters can trigger ultrafast charge migration, proton transfer, and isomerization; however, the onset timescales of these pathways remain largely unexplored despite extensive steady-state mass-spectrometric evidence for protonation and chemical rearrangement. Here we use femtosecond time-resolved strong-field ionization and disruptive probing to directly track the early-time dynamics of methanol clusters. Transient mass spectra yield size-dependent timescales for the formation of protonated clusters H + (CH 3 OH) n (n = 1–3) and an associated CHO˙ + radical cation. We find that both proton-transfer and subsequent stabilization become markedly faster with increasing cluster size. These measurements establish methanol clusters as a complementary benchmark to water for understanding ionization-initiated proton motion and chemical reorganization in hydrogen-bonded liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

A proton beam energy modulator for rapid proton therapy

We present the design for a rapid proton energy modulator with radiofrequency accelerator cavities, which can deliver the proton radiation dose to varied depth in human tissues much faster than traditional mechanical beam energy degraders. The proton energy modulator is designed as a multi-cell 1-m long accelerator working at 2.856 GHz. Each individual accelerator cavity is powered by a 400 kW compact klystron to provide an accelerating/decelerating gradient of 30 MV/m. The high gradient is enabled by the individual power coupling regime, which provides a high shunt impedance. Beam dynamics simulations were performed, showing that the energy modulator can provide ±30 MeV of beam energy change for a 150 MeV, 7 mm long (full length) proton bunch, and the total energy spread of 3 MeV is satisfactory to clinical needs. A prototype experiment of a single cell has been built and tested, and the low-power microwave measurement results agree very well with simulations. The energy modulator is optimized for the 150 MeV cyclotron proton beam, while this approach can work with different beam energies.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Proton reconstruction with the CMS-TOTEM Precision Proton Spectrometer

The Precision Proton Spectrometer (PPS) of the CMS and TOTEM experiments collected 107.7 fb$^{-1}$ in proton-proton (pp) collisions at the LHC at 13 TeV (Run 2). This paper describes the key features of the PPS alignment and optics calibrations, the proton reconstruction procedure, as well as the detector efficiency and the performance of the PPS simulation. The reconstruction and simulation are validated using a sample of (semi)exclusive dilepton events. The performance of PPS has proven the feasibility of continuously operating a near-beam proton spectrometer at a high luminosity hadron collider.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Improving the feasibility of economical proton-boron-11 fusion via alpha channeling with a hybrid fast and thermal proton scheme

The proton-boron-11 (p-B11) fusion reaction is much harder to harness for commercial power than the easiest fusion reaction, namely, the deuterium and tritium (DT) reaction. The p-B11 reaction requires much higher temperatures, and, even at those higher temperatures, the cross section is much smaller. However, as opposed to tritium, the reactants are both abundant and nonradioactive. It is also an aneutronic reaction, thus avoiding radioactivity-inducing neutrons. Economical fusion can only result, however, if the plasma is nearly ignited; in other words if the fusion power is at least nearly equal to the power lost due to radiation and thermal conduction. Because the required temperatures are so high, ignition is thought barely possible for p-B11, with fusion power exceeding the bremsstrahlung power by only around 3%. We show that there is a high upside to changing the natural flow of power in the reactor, putting more power into protons, and less into the electrons. This redirection can be done using waves, which tap the alpha particle power and redirect it into protons through alpha channeling. Using a simple power balance model, we show that such channeling could reduce the required energy confinement time for ignition by a factor of 2.6 when energy is channeled into thermal protons, and a factor of 6.9 when channeled into fast protons near the peak of the reactivity. Furthermore, alpha channeling could dramatically improve the feasibility of economical p-B11 fusion energy.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Measurement of single-diffractive dijet production in proton-proton collisions at $\sqrt{s} =$ 8 TeV with the CMS and TOTEM experiments

Measurements are presented of the single-diffractive dijet cross section and the diffractive cross section as a function of the proton fractional momentum loss $\xi $ and the four-momentum transfer squared t. Both processes ${\text{ p }{}{}} {\text{ p }{}{}} \rightarrow {\text{ p }{}{}} {\text{ X }} $ and ${\text{ p }{}{}} {\text{ p }{}{}} \rightarrow {\text{ X }} {\text{ p }{}{}} $, i.e. with the proton scattering to either side of the interaction point, are measured, where ${\text{ X }} $ includes at least two jets; the results of the two processes are averaged. The analyses are based on data collected simultaneously with the CMS and TOTEM detectors at the LHC in proton–proton collisions at $\sqrt{s} = 8\,\text {Te}\text {V} $ during a dedicated run with $\beta ^{*} = 90\,\text {m} $ at low instantaneous luminosity and correspond to an integrated luminosity of $37.5{\,\text {nb}^{-1}} $. The single-diffractive dijet cross section $\sigma ^{{\text{ p }{}{}} {\text{ X }}}_{\mathrm {jj}}$, in the kinematic region $\xi < 0.1$, $0.03< |t | < 1\,\text {Ge}\text {V} ^2$, with at least two jets with transverse momentum $p_{\mathrm {T}} > 40\,\text {Ge}\text {V} $, and pseudorapidity $|\eta | < 4.4$, is $21.7 \pm 0.9\,\text {(stat)} \,^{+3.0}_{-3.3}\,\text {(syst)} \pm 0.9\,\text {(lumi)} \,\text {nb} $. The ratio of the single-diffractive to inclusive dijet yields, normalised per unit of $\xi $, is presented as a function of x, the longitudinal momentum fraction of the proton carried by the struck parton. The ratio in the kinematic region defined above, for x values in the range $-2.9 \le \log _{10} x \le -1.6$, is $R = (\sigma ^{{\text{ p }{}{}} {\text{ X }}}_{\mathrm {jj}}/\Delta \xi )/\sigma _{\mathrm {jj}} = 0.025 \pm 0.001\,\text {(stat)} \pm 0.003\,\text {(syst)} $, where $\sigma ^{{\text{ p }{}{}} {\text{ X }}}_{\mathrm {jj}}$ and $\sigma _{\mathrm {jj}}$ are the single-diffractive and inclusive dijet cross sections, respectively. The results are compared with predictions from models of diffractive and nondiffractive interactions. Monte Carlo predictions based on the HERA diffractive parton distribution functions agree well with the data when corrected for the effect of soft rescattering between the spectator partons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Measurement of transverse single-spin asymmetries for dijet production in polarized proton-proton collisions at √s = 200 GeV

We report a new measurement of transverse single-spin asymmetries for dijet production in collisions of polarized protons at √ s = 200 GeV. Possible correlations between the proton spin and the transverse momenta of its partons, mutually orthogonal, with each perpendicular to the proton momentum direction, are probed at high Q 2 ≈160 GeV 2 . The associated Sivers observable ${\langle}k_T{\rangle}$, the average parton transverse momentum, is extracted using simple kinematics. Nonzero Sivers effects are observed for the first time in proton-proton collisions, but only when the jets are sorted by their net charge, which enhances the u- or d-quark contributions to separate data samples. This also enables a determination of the individual partonic contributions to the observed asymmetries.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS1975

A two-parameter scintillation spectrometer system for measurement of secondary proton, deuteron, and triton distributions from materials under 558-MeV-proton irradiation

A two-parameter scintillation spectrometer system developed and used to obtain proton, deuteron, and triton double differential cross sections from materials under 558-MeV-proton irradiation is described. The system measures both the time of flight of secondary particles over a 488-cm flight path and the energy deposited in a scintillator, 12.7 cm in diameter and 30.48 cm long. The time resolution of the system is 0.39 nsec. The calculated energy resolution based on this time resolution varies with energy from 1.6 precent to 7.75 percent for 50- and 558-MeV protons. Various systematic and statistical errors are evaluated, and the double differential cross sections for secondary proton and deutron production at 20 deg from a 2.35 g/sq cm thick beryllium target are shown as an example of the results obtainable with this system. The uncertainly in the cross sections for secondary protons varies with particle energy from approximately + or - 9 percent at 50 MeV to approximately + or - 11 percent at 558 MeV.

Beck, S. M.↗