SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Late components of evoked waveforms recorded from the frontal areas of the brain are correlated with an observer's interpretation of a stimulus display. The possible use of such signals as control inputs is discussed.
Mishap investigations provide important information about adverse events and near miss incidents. They are intended to help avoid any recurrence of previous failures. Over time, they can also yield statistical information about incident frequencies that helps to detect patterns of failure and can validate risk assessments. However, the increasing complexity of many safety critical systems is posing new challenges for mishap analysis. Similarly, the recognition that many failures have complex, systemic causes has helped to widen the scope of many mishap investigations. These two factors have combined to pose new challenges for the analysis of adverse events. A new generation of formal and semi-formal techniques have been proposed to help investigators address these problems. We introduce the term mishap logics to collectively describe these notations that might be applied to support the analysis of mishaps. The proponents of these notations have argued that they can be used to formally prove that certain events created the necessary and sufficient causes for a mishap to occur. These proofs can be used to reduce the bias that is often perceived to effect the interpretation of adverse events. Others have argued that one cannot use logic formalisms to prove causes in the same way that one might prove propositions or theorems. Such mechanisms cannot accurately capture the wealth of inductive, deductive and statistical forms of inference that investigators must use in their analysis of adverse events. This paper provides an overview of these mishap logics. It also identifies several additional classes of logic that might also be used to support mishap analysis.
The improvement in land cover classification achieved by merging microwave data with Landsat MSS data is examined. To produce a merged data set for analysis and comparison, a registration procedure by which a set of Seasat SAR digital data was merged with the MSS data is described. The Landsat MSS data and the merged Landsat/Seasat data sets were processed using conventional multichannel spectral pattern recognition techniques. An analysis of the classified data sets indicates that while Landsat data delineate different forest types (i.e., deciduous/coniferous) and allow some species separation, SAR data provide additional information related to plant canopy configuration and vegetation density as associated with varying water regimes, and therefore allow for further subdivision in the classification of forested wetlands of the coastal region of the southern United States.
The MIDAS system is a prototype, multiple-pipeline digital processor mechanizing the multivariate-Gaussian, maximum-likelihood decision algorithm operating at 200,000 pixels/second. It incorporates displays and film printer equipment under control of a general purpose midi-computer and possesses sufficient flexibility that operational versions of the equipment may be subsequently specified as subsets of the system.
Pattern recognition subprogram is used to produce table which indicates sections of input data. Program then uses data to write set of Kirchhoff equations algebraically solved by Gaus reduction method.
NASA's ERTS-1 satellite, with its high resolution and multispectral capabilities, has been found useful in the detection and analysis of smoke from large point sources (power plants, steel mills, etc.), and widespread atmospheric turbidity associated with atmospheric stagnations. Smoke plumes from the Chicago-Northern Indiana industrial complex have been tracked over Lake Michigan for over 100 km. Experience has shown that smoke plumes are relatively easy to detect over water (in the 0.6-0.7 micrometer band) but much more difficult over land surfaces. Pattern recognition techniques (cluster analysis) were applied to the digital ERTS data, and it was found that the smoke plumes indeed had a unique spectral signature. Studies are currently underway to use measured plume geometries to obtain quantitative estimates of diffusion over water surfaces.
During the last several years, a number of airborne and satellite hyperspectral sensors have been developed or improved for remote sensing applications. Imaging spectrometry allows the detection of materials, objects and regions in a particular scene with a high degree of accuracy. Hyperspectral data typically consist of hundreds of thousands of spectra, so the analysis of this information is a key issue. Mathematical morphology theory is a widely used nonlinear technique for image analysis and pattern recognition. Although it is especially well suited to segment binary or grayscale images with irregular and complex shapes, its application in the classification/segmentation of multispectral or hyperspectral images has been quite rare. In this paper, we discuss a new completely automated methodology to find endmembers in the hyperspectral data cube using mathematical morphology. The extension of classic morphology to the hyperspectral domain allows us to integrate spectral and spatial information in the analysis process. In Section 3, some basic concepts about mathematical morphology and the technical details of our algorithm are provided. In Section 4, the accuracy of the proposed method is tested by its application to real hyperspectral data obtained from the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) imaging spectrometer. Some details about these data and reference results, obtained by well-known endmember extraction techniques, are provided in Section 2. Finally, in Section 5 we expose the main conclusions at which we have arrived.
Linear receptivity studies in parallel flows are aimed at understanding how external forcing couples to the natural unstable motions which a flow can support. The vibrating ribbon problem models the original Schubauer and Skramstad boundary layer experiment and represents the classic boundary layer receptivity problem. The process by which disturbances are initiated in convectively-unstable jets and shear layers has also received attention. Gaster was the first to handle the boundary layer analysis with the recognition that spatial modes, rather than temporal modes, were relevant when studying convectively-unstable flows that are driven by a time-harmonic source. The amplitude of the least stable spatial mode, far downstream of the source, is related to the source strength by a coupling coefficient. The determination of this coefficient is at the heart of this type of linear receptivity study. The first objective of the present study was to determine whether the various wave number derivative factors, appearing in the coupling coefficients for linear receptivity problems, could be reexpressed in a simpler form involving adjoint eigensolutions. Secondly, it was hoped that the general nature of this simplification could be shown; indeed, a rather elegant characterization of the receptivity properties of spatial instabilities does emerge. The analysis is quite distinct from the usual Fourier-inversion procedures, although a detailed knowledge of the spectrum of the Orr-Sommerfeld equation is still required. Since the cylinder wake analysis proved very useful in addressing control considerations, the final objective was to provide a foundation upon which boundary layer control theory may be developed.
Human decision making in multiple process monitoring situations is considered. It is proposed that human decision making in many multiple process monitoring situations can be modeled in terms of the human's detection of process related events and his allocation of attention among processes once he feels event have occurred. A mathematical model of human event detection and attention allocation performance in multiple process monitoring situations is developed. An assumption made in developing the model is that, in attempting to detect events, the human generates estimates of the probabilities that events have occurred. An elementary pattern recognition technique, discriminant analysis, is used to model the human's generation of these probability estimates. The performance of the model is compared to that of four subjects in a multiple process monitoring situation requiring allocation of attention among processes.
It is proposed that human decisionmaking performance in multiple process monitoring situations can be modeled in terms of the detection of process related events and the allocation of attention among processes once events are felt to have occurred. An elementary pattern recognition technique, discriminant analysis, is used to generate estimates of event occurrence probability. A queueing theory framework is then utilized to incorporate these probabilities as well as other task characteristics into the solution of the attention allocation problem. The performance of the model is compared with that of subjects in two experiments.
Scene radiation and atmospheric effects, mathematical pattern recognition and image analysis, information evaluation and utilization, and electromagnetic measurements and signal handling are considered. Research issues in sensors and signals, including radar (SAR) reflectometry, SAR processing speed, registration, including overlay of SAR and optical imagery, entire system radiance calibration, and lack of requirements for both sensors and systems, etc. were discussed.
An important question in cluster analysis and pattern recognition is the determination of the number of clusters into which a given population should be divided. Frequently, particularly when certain specific clustering methods are being used, the number of clusters is taken to be equal to the number of modes, or local maxima, in the probability density function underlying the given data set. The use of kernal density estimates in mode estimation is discussed. The test statistic to be used is defined and a bootstrap technique for assessing significance is given. An illustrative application is followed by an examination of the asymptotic behavior of the test statistic.
Research proposals in mathematical pattern recognition and image analysis are presented.
Plans for two fundamental research programs aimed at improving an understanding of the physics and mathematics of remote sensing are discussed. The first program, Scene Radiation and Atmospheric Research Program, is concerned with developing the capability to determine biophysical attributes of terrestrial scenes through an improved understanding of the relationships between those properties and remotely sensed radiation. The research issues in the second program, Mathematical Pattern Recognition and Image Analysis, are discussed with reference to the following five categories: preprocessing, digital image representation, object scene inference, computational structures, and continuing studies.
Sparse distributed memory is a generalized random access memory (RAM) for long (1000 bit) binary words. Such words can be written into and read from the memory, and they can also be used to address the memory. The main attribute of the memory is sensitivity to similarity, meaning that a word can be read back not only by giving the original write address but also by giving one close to it as measured by the Hamming distance between addresses. Large memories of this kind are expected to have wide use in speech recognition and scene analysis, in signal detection and verification, and in adaptive control of automated equipment, in general, in dealing with real world information in real time. The memory can be realized as a simple, massively parallel computer. Digital technology has reached a point where building large memories is becoming practical. Major design issues were resolved which were faced in building the memories. The design is described of a prototype memory with 256 bit addresses and from 8 to 128 K locations for 256 bit words. A key aspect of the design is extensive use of dynamic RAM and other standard components.
While parallel processing promises to speed up applications by several orders of magnitude, the performance achieved still depends upon several factors, including the multiprocessor architecture, system software, data distribution and alignment, as well as the methods used for partitioning the application and mapping its components onto the architecture. The existence of the Gorden Bell Prize given out at Supercomputing every year suggests that while good performance can be attained for real applications on general purpose multiprocessors, the large investment in man-power and time still has to be repeated for each application-machine combination. As applications and machine architectures become more complex, the cost and time-delays for obtaining performance by hand will become prohibitive. Computer users today can turn to three possible avenues for help: parallel libraries, parallel languages and compilers, interactive parallelization tools. The success of these methodologies, in turn, depends on proper application of data dependency analysis, program structure recognition and transformation, performance prediction as well as exploitation of user supplied knowledge. NASA has been developing multidisciplinary applications on highly parallel architectures under the High Performance Computing and Communications Program. Over the past six years, the transition of underlying hardware and system software have forced the scientists to spend a large effort to migrate and recede their applications. Various attempts to exploit software tools to automate the parallelization process have not produced favorable results. In this paper, we report our most recent experience with CAPTOOL, a package developed at Greenwich University. We have chosen CAPTOOL for three reasons: 1. CAPTOOL accepts a FORTRAN 77 program as input. This suggests its potential applicability to a large collection of legacy codes currently in use. 2. CAPTOOL employs domain decomposition to obtain parallelism. Although the fact that not all kinds of parallelism are handled may seem unappealing, many NASA applications in computational aerosciences as well as earth and space sciences are amenable to domain decomposition. 3. CAPTOOL generates code for a large variety of environments employed across NASA centers: MPI/PVM on network of workstations to the IBS/SP2 and CRAY/T3D.
Anomalies such as corrosion, structural damage, misalignment, cracking, stress fiactures, pitting, or wear can be detected and monitored by the aid of a borescope. A borescope requires a source of light for proper operation. Today s current lighting technology market consists of incandescent lamps, fluorescent lamps and other types of electric arc and electric discharge vapor lamp. Recent advances in LED technology have made LEDs viable for a number of applications, including vehicle stoplights, traffic lights, machine-vision-inspection, illumination, and street signs. LEDs promise significant reduction in power consumption compared to other sources of light. This project focused on comparing images taken by the Olympus IPLEX, using two different light sources. One of the sources is the 50-W internal metal halide lamp and the other is a 1 W LED placed at the tip of the insertion tube. Images acquired using these two light sources were quantitatively compared using their histogram, intensity profile along a line segment, and edge detection. Also, images were qualitatively compared using image registration and transformation [l]. The gray-level histogram, edge detection, image profile and image registration do not offer conclusive results. The LED light source, however, produces good images for visual inspection by an operator. Analysis using pattern recognition using Eigenfaces and Gaussian Pyramid in face recognition may be more useful.
Elemental abundances (C6, N7, O8, Na11, Mg12, Al3, P15, S16, Cl17, K19, Ca20, Ti22, Mn25, Fe26, and Ni28) were obtained for a set of terrestrial fossils and the rock matrix surrounding them. Principal Component Analysis extracted five factors accounting for the 92.5% of the data variance, i.e. information content, of the elemental abundance data. Hierarchical Cluster Analysis provided unsupervised sample classification distinguishing fossil from matrix samples on the basis of either raw abundances or PCA input that agreed strongly with visual classification. A stochastic, non-linear Artificial Neural Network produced a Bayesian probability of correct sample classification. The results provide a quantitative probabilistic methodology for discriminating terrestrial fossils from the surrounding rock matrix using chemical information. To demonstrate the applicability of these techniques to the assessment of meteoritic samples or in situ extraterrestrial exploration, we present preliminary data on samples of the Orgueil meteorite. In both systems an elemental signature produces target classification decisions remarkably consistent with morphological classification by a human expert using only structural (visual) information. We discuss the possibility of implementing a complexity analysis metric capable of automating certain image analysis and pattern recognition abilities of the human eye using low magnification optical microscopy images and discuss the extension of this technique across multiple scales.