Search NASA⌕ Search

SEARCH · Search NASA

Results for “recombination centers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Hydrogen Transport from Dielectrics to poly-Si/SiOx Passivating Contacts Measured by Mass Spectrometry and Vibrational Spectroscopy

We demonstrate the relationship between Si solar cell passivation and hydrogen content of various passivating films, including hydrogenated amorphous silicon (a-Si:H), aluminum oxide (Al2O3), silicon nitride (SiNx) and combinations thereof. Through isotopic studies using quadrupole mass spectrometry (QMS), Fourier transform infrared spectroscopy (FTIR), and Raman spectroscopy, we determine how hydrogen content and stability within each type of film relates to final passivation quality of solar cell test structures. Si solar cells using polycrystalline silicon on silicon oxide (poly-Si/SiOx) passivating contacts are at the forefront of Si solar cell research and emerging as top performers within industrial production. Performance of passivating contact Si solar cells is largely determined by a parameter known as the open-circuit voltage Voc, which directly relates to material quality within the bulk of the device and at surfaces. High Voc is achieved when defects within the bulk crystalline silicon (c-Si) and at interfaces are passivated, preventing them from acting as charge carrier recombination centers. One of the most important means of passivating defects within Si solar cells is via hydrogenation, injecting the cells with large amounts of H to satisfy dangling bonds in the bulk and at interfaces. Hydrogen is especially important in deactivating a prevalent defect in industrial p-type devices which leads to decreased device performance over long-term exposure to light, called light-induced degradation (LID). Some of the most common materials used to supply H to devices are a-Si:H, Al2O3, and SiNx, which can contain very large amounts of H. Upon annealing at elevated temperatures, the hydrogen becomes mobile enough to find and disable defect sites. However, too much hydrogen can also be problematic, sometimes leading to an effect called light and elevated temperature induced degradation (LeTID). It has been shown that these films passivate the interfaces of poly-Si passivating contacts differently, leading to differing performance. Though Al2O3 is a well-defined dielectric material, SiNx can have many different values of x depending on precursor gases and deposition conditions. We observe different FTIR and Raman spectra from different SiNx over a range of x values films to determine the bonding environments within them and further correlate the relative concentrations of Si, N, and H to the stability of H within SiNx and the passivation performance of each film. Because deuterium is chemically identical to hydrogen within these systems, but gives different signals in FTIR and Raman spectroscopy as well as in QMS, isotopic substitution can be used as an excellent tool to probe the H within films. In addition to measuring the H and D bonding within films using FTIR and Raman spectroscopy, we will use such isotopic experiments to observe H and D movement out of these hydrogenating films at elevated temperatures using QMS to determine the stability of H bonding within such systems. With these films characterized based on elemental composition, we will relate such measurements to passivation quality of these films and combinations thereof on poly-Si/SiOx contact structures using quasi-steady state photoconductance decay measurements to obtain implied open-circuit voltage (iVoc) and saturation current density J0 values. Such investigations into the performance of different passivating films and film stacks will lead to greater understanding of dielectrics in semiconductor devices, further improvements in passivated contact design, and eventually, greater proliferation of renewable solar energy worldwide.

Al2O3↗
DOE OSTI2023

Understanding Microscopic Mechanisms of LeTID and LID and their Unifying Features by Electron Paramagnetic Resonance

LID degradation involves not only creation of ~ 10^12 cm^-3 recombination centers, but also ~ 10^16 cm^-3 shallow negative-U traps. In Ga-doped Si, LID EPR defects don't appear, but some traps are still created. LeTID: Si DB and H-hyperfine EPR signatures. We postulate that the defect responsible for LeTID is a partially hydrogenated (multivacancy) with a Si dangling bond and H in the vicinity. O involvement is possible yet unclear. We prove that H is related to the structure of the LeTID defect with isotope experiments and its EPR signal is comparable and linear with the Si DB signal upon LeTID degradation. Working on simulating these results with DFT to obtain more detailed defect structure.

Cz Si↗
DOE OSTI2021

Non-radiative luminescence decay with self-trapped hole migration in strontium titanate: Interplay between optical and transport properties

A novel model for the non-radiative decay of self-trapped excitons (STEs) in the advanced functional oxide SrTiO3 is proposed and supported by experimental observations. The study is based on the initial ionoluminescence stage for STE emission at 2.5 eV, and its dependence on temperature and electronic excitation rate under energetic heavy-ion irradiation. For all temperatures, this initial stage reaches rapidly a quasi-steady level, and then decreases as induced-structural damage increases. The quasi-steady luminescence exhibits a linear dependence on the excitation rate, suggesting a constant efficiency for STEs formation. An activation energy of 55 meV, essentially independent of the incident ion mass and energy of projectile-ion, is deduced from an Arrhenius-type relationship with irradiation temperature. This energy is in good agreement with experimental values, measured for non-radiative STE decay under ns-laser pulse excitation, and reasonably consistent with density functional theory calculations for migration of self-trapped holes (STHs) described by a small-polaron adiabatic hopping model. A new mechanism dealing with a non-radiative contribution to the STE transition is discussed, consisting of STH migration through thermally-activated hopping and annihilation with the STE-electron. Luminescence kinetics from the chromium intrinsic impurity strongly supports this model, being consistent with the annihilation of Cr 3+ centers through recombination with migrating STHs.

luminescence↗
DOE OSTI2024

Improved solar cell performance and reliability through advanced defect characterization and growth studies

When this project began, CIGS and ACIGS solar cells were still well below the Shockley-Queisser efficiency limit for their bandgaps. Literature review from showed that JSC and FF were ~90% of the ideal values depending on the growth, but that VOC was only around 75% of the ideal value, which provided a clear objective to improve CIGS VOC. In polycrystalline CIGS, semiconductor defects (traps) have been shown by many studies to have detrimental impacts on device performance. Thus, the goal of this project was to investigate the sources and impacts of defects in CIGS, model their impact on device performance to predict efficiency improvements, and develop effective mitigation strategies to reduce the overall trap concentrations of these traps.

14 SOLAR ENERGY↗
DOE OSTI2024

Local Background Hole Density Drives Nonradiative Recombination in Tin Halide Perovskites

In this study, we use multimodal microscopy to study carrier recombination in semiconducting tin halide perovskite films based on PEA 0.2 FA 0.8 SnI 3 (PEA = phenethylammonium; FA = formamidinium). We use the observation of pseudo-first-order photoluminescence (PL) decay kinetics to establish a method for quantifying the hole dopant level and nonradiative recombination rate constant. We find that untreated PEA 0.2 FA 0.8 SnI 3 films exhibit large hole doping concentrations of p 0 ≈ 10 19 cm –3 , which is reduced to p 0 ≈ 10 16 cm –3 after SnF 2 treatment. While it is well-known that the radiative recombination rates are increased with p 0 , we reveal that the nonradiative rate is also increased. We find that p-type regions in untreated PEA 0.2 FA 0.8 SnI 3 films are centers for nonradiative recombination, which are diminished in films with p 0 ≈ 10 16 cm –3 . We discover significant PL heterogeneity even in PEA 0.2 FA 0.8 SnI 3 films with moderate dopant levels, suggesting that new strategies to eliminate deleterious defects in PEA 0.2 FA 0.8 SnI 3 must be developed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Anharmonic multi-phonon nonradiative transition: An ab initio calculation approach

Nonradiative carrier recombinations at deep centers in semiconductors are of great importance for both fundamental physics and device engineering. Here, we provide a revised analysis of Huang’s original nonradiative multi-phonon (NMP) theory with ab initio calculations. First, we confirmed at the first-principles level that Huang’s concise formula gives the same results as the matrix-based formula, and that Huang’s high-temperature formula provides an analytical expression for the coupling constant in Marcus theory. Secondly, we correct for anharmonic effects by taking into account local phonon-mode variations for different charge states of a defect. The corrected capture rates for defects in GaN and SiC agree well with experiments.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Investigation of the competition between Tl + and Ce 3+ scintillation in Tl2LiYCl6:Ce, an elpasolite scintillator

Li-containing elpasolite scintillators are currently investigated for their ability to detect both thermal neutrons and gamma photons with a single inorganic crystal. The scintillation is typically triggered by using an activator such as Ce. However, when Tl, also a luminescent ion, is present in the matrix, competition between the two centers Tl and Ce can occur. In this study, we are using Ce doped Tl 2 LiYCl 6 to investigate this competition. To this end, the Ce (which substitutes Y) concentration is varied from 0 to 1 in the Tl 2 LiY 1-x CexCl 6 composition. In the low concentration range in which Ce remains a dopant, the photo- and radioluminescence spectra show that the scintillation of Tl 2 LiYCl 6 :Ce is mostly dominated by recombination on intrinsic luminescent centers. For cerium concentrations higher than x = 0.02, very different emissions can be easily distinguished from the photo- and radioluminescence of undoped and low Ce doped Tl 2 LiYCl 6 crystals. These emissions are attributed to the formation of a second phase Tl 2 CeCl 5 , identified by X-ray diffraction. We conclude that the intrinsic luminescence related to Tl dominates the scintillation in the range of concentration for which Ce does substitute on the Y-site.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Two‐Dimensional Polycyclic Photovoltaic Molecule with Low Trap Density for High‐Performance Photocatalytic Hydrogen Evolution

Abstract Typical organic semiconductors show a high trap density of states (10 16 –10 18 cm −3 ), providing a large number of centers for charge‐carrier recombination, thus hindering the development of photocatalytic hydrogen evolution. Here, we design and synthesize a two‐dimensional polycyclic photovoltaic material, named as TPP, to reduce the trap density to as low as 2.3×10 15 cm −3 , which is 1–3 orders of magnitude lower than those of typical organic semiconductors. Moreover, TPP exhibits a broad and strong absorption, ordered molecular packing with a large crystalline coherence length and enhanced electron mobility. Then, the bulk heterojunction nanoparticles (BHJ‐NPs) based on a blend of polymer donor (PM6) and TPP exhibit an average hydrogen evolution rate (HER) of 64.31 mmol h −1 g −1 under AM1.5G sunlight (100 mW cm −2 ), and 72.75 mmol h −1 g −1 under 330–1100 nm illumination (198 mW cm −2 ) higher than that of the control NPs based on typical PM6 : Y6 (62.67 mmol h −1 g −1 ).

Zhang, Zhenzhen↗
DOE OSTI2023

Unconventional Pathway in the Gas‐Phase Synthesis of 9 H ‐Fluorene (C 13 H 10 ) via the Radical–Radical Reaction of Benzyl (C 7 H 7 ) with Phenyl (C 6 H 5 )

Abstract The simplest polycyclic aromatic hydrocarbon (PAH) carrying a five‐membered ring—9 H ‐fluorene (C 13 H 10 )—is produced isomer‐specifically in the gas phase by reacting benzyl (C 7 H 7 ⋅) with phenyl (C 6 H 5 ⋅) radicals in a pyrolytic reactor coupled with single photon ionization mass spectrometry. The unconventional mechanism of reaction is supported by theoretical calculations, which first produces diphenylmethane and unexpected 1‐(6‐methylenecyclohexa‐2,4‐dienyl)benzene intermediates (C 13 H 12 ) accessed via addition of the phenyl radical to the ortho position of the benzyl radical. These findings offer convincing evidence for molecular mass growth processes defying conventional wisdom that radical‐radical reactions are initiated through recombination at their radical centers. The structure of 9 H ‐fluorene acts as a molecular building block for complex curved nanostructures like fullerenes and nanobowls providing fundamental insights into the hydrocarbon evolution in high temperature settings.

He, Chao↗
DOE OSTI2022

Unconventional Pathway in the Gas-Phase Synthesis of 9 H -Fluorene (C 13 H 10 ) via the Radical–Radical Reaction of Benzyl (C 7 H 7 ) with Phenyl (C 6 H 5 )

The simplest polycyclic aromatic hydrocarbon (PAH) carrying a five-membered ring - 9H-fluorene (C 13 H 10 ) - is produced isomer-specifically in the gas phase by reacting benzyl (C 7 H 7 •) with phenyl (C 6 H 5 •) radicals in a pyrolytic reactor coupled with single photon ionization mass spectrometry. The unconventional mechanism of reaction is supported by theoretical calculations, which first produces diphenylmethane and unexpectedly 1-(6-methylenecyclohexa-2,4-dienyl)benzene intermediates (C 13 H 12 ) accessed via addition of the phenyl radical to the ortho position of the benzyl radical. These findings offer convincing evidence for molecular mass growth processes defying conventional wisdom that radical–radical reactions are initiated through recombination at their radical centers. Furthermore, the structure of 9H-fluorene acts as a molecular building block for complex curved nanostructures like fullerenes and nanobowls providing fundamental insights into the hydrocarbon evolution in high temperature settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Two-Dimensional Polycyclic Photovoltaic Molecule with Low Trap Density for High-Performance Photocatalytic Hydrogen Evolution

Typical organic semiconductors show a high trap density of states (10 16 –10 18 cm -3 ), providing a large number of centers for charge-carrier recombination, thus hindering the development of photocatalytic hydrogen evolution. In this report we design and synthesize a two-dimensional polycyclic photovoltaic material, named as TPP, to reduce the trap density to as low as 2.3×10 15 cm -3 , which is 1–3 orders of magnitude lower than those of typical organic semiconductors. Moreover, TPP exhibits a broad and strong absorption, ordered molecular packing with a large crystalline coherence length and enhanced electron mobility. Then, the bulk heterojunction nanoparticles (BHJ-NPs) based on a blend of polymer donor (PM6) and TPP exhibit an average hydrogen evolution rate (HER) of 64.31 mmol h -1 g -1 under AM1.5G sunlight (100,mW cm -2 ), and 72.75 mmol h -1 g -1 under 330–1100 nm illumination (198 mW cm -2 ) higher than that of the control NPs based on typical PM6 : Y6 (62.67 mmol h -1 g -1 ).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Gas-phase synthesis of anthracene and phenanthrene via radical-radical reaction induced ring expansions

Unraveling reaction mechanisms of aromatic and resonance-stabilized radicals is critical to understanding molecular mass growth processes to polycyclic aromatic hydrocarbons (PAHs) and carbonaceous nanoparticles in distinct astrophysical environments (molecular clouds, circumstellar envelopes) and combustion systems. Using photoelectron photoion coincidence spectroscopy (PEPICO), we explored the gas-phase reaction of the methyl radical (CH 3 • ) with the aromatic and resonance-stabilized fluorenyl radical (C 13 H 9 • ) under high-temperature conditions in a chemical microreactor. Anthracene and phenanthrene were detected isomer-selectively using photoionization efficiency (PIE) curves and mass-selected threshold photoelectron (ms-TPE) spectra. While phenanthrene is produced through a radical-radical recombination of the carbon-centered radicals, anthracene may plausibly be formed through an unconventional radical addition to a low spin-density fluorenyl carbon. These pathways result in five-membered ring expansion—a critical mechanism crucial to PAH mass growth converting bent PAHs into planar nanostructures.

Goettl, Shane J. [University of Hawai‘i at Mānoa, ↗
DOE OSTI2025

NNL.Fe.qSNAP-ZBL.2024.1: A Fe Spectral Neighbor Analysis Potential for Radiation Damage Simulations

The NNL.Fe.qSNAP-ZBL.2024.1 machine-learned potential (MLP) has been generated to support the development of an elemental body-centered cubic (BCC) Fe athermal recombination corrected neutron damage model and simulations of primary recoil atom (PRA) cascades in BCC Fe. This MLP is a quadratic spectral neighbor analysis potential (qSNAP) hybridized with the universal Ziegler-Beirsack-Littmark (ZBL) potential at short-range and is named according to Naval Nuclear Laboratory MLP naming conventions (NNL.material-system.MLP-type.year.version). Training set calculations for Fe are presented along with the subsequent MLP fitting procedure. A key criterion of the fitting procedure is that ZBL describes the short-range interaction with minimal impact on the MLP. The MLP is compared to density functional theory (DFT) predicted properties relevant to radiation damage simulation, including threshold displacement energies, for validation. The NNL.Fe.qSNAP-ZBL.2024.1 potential is considered suitable for molecular dynamics (MD) simulations of radiation defects up to 800 K and PRA cascades in BCC Fe up to around 10 keV. The potential can additionally be used on a limited basis for recoils of 10–20 keV, within which range the emergence of structures outside the training set in cascade simulations may cause system instabilities.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Probing the Atomic Scale Mechanisms of Time Dependent Dielectric Breakdown in Si/SiO 2 MOSFETs (June 2022)

Here we report on an atomic-scale study of trap generation in the initial/intermediate stages of time-dependent dielectric breakdown (TDDB) in high-field stressed (100) Si/SiO2 MOSFETs using two powerful analytical techniques: electrically detected magnetic resonance (EDMR) and near-zero-field magnetoresistance (NZFMR). We find the dominant EDMR-sensitive traps generated throughout the majority of the TDDB process to be silicon dangling bonds at the (100) Si/SiO2 interface (Pb0 and Pb1 centers) for both the spin-dependent recombination (SDR) and trap-assisted tunneling (SDTAT) processes. We find this generation to be linked to both changes in the calculated interface state densities as well as changes in the NZFMR spectra for recombination events at the interface, indicating a redistribution of mobile magnetic nuclei which we conclude could only be due to the redistribution of hydrogen at the interface. Additionally, we observe the generation of traps known as E’ centers in EDMR measurements at lower experimental temperatures via SDR measurements at the interface. Our work strongly suggests the involvement of a rate-limiting step in the tunneling process between the silicon dangling bonds generated at the interface and the ones generated throughout the oxide.

36 MATERIALS SCIENCE↗
DOE OSTI2022

An all optical approach for comprehensive in-operando analysis of radiative and nonradiative recombination processes in GaAs double heterostructures

We demonstrate an all optical approach that can surprisingly offer the possibility of yielding much more information than one would expect, pertinent to the carrier recombination dynamics via both radiative and nonradiative processes when only one dominant deep defect level is present in a semiconductor material. By applying a band-defect state coupling model that explicitly treats the inter-band radiative recombination and Shockley–Read–Hall (SRH) recombination via the deep defect states on an equal footing for any defect center occupation fraction, and analyzing photoluminescence (PL) as a function of excitation density over a wide range of the excitation density (e.g., 5–6 orders in magnitude), in conjunction with Raman measurements of the LO-phonon plasmon (LOPP) coupled mode, nearly all of the key parameters relevant to the recombination processes can be obtained. They include internal quantum efficiency (IQE), minority and majority carrier density, inter-band radiative recombination rate (W r ), minority carrier nonradiative recombination rate (W nr ), defect center occupation fraction (f), defect center density (N t ), and minority and majority carrier capture cross-sections (σ t and σ tM ). While some of this information is thought to be obtainable optically, such as IQE and the W r /W nr ratio, most of the other parameters are generally considered to be attainable only through electrical techniques, such as current-voltage (I-V) characteristics and deep level transient spectroscopy (DLTS). Following a procedure developed herein, this approach has been successfully applied to three GaAs double-heterostructures that exhibit two distinctly different nonradiative recombination characteristics. The method greatly enhances the usefulness of the simple PL technique to an unprecedented level, facilitating comprehensive material and device characterization without the need for any device processing.

14 SOLAR ENERGY↗
DOE OSTI2023

19.31% binary organic solar cell and low non-radiative recombination enabled by non-monotonic intermediate state transition

Non-fullerene acceptors based organic solar cells represent the frontier of the field, owing to both the materials and morphology manipulation innovations. Non-radiative recombination loss suppression and performance boosting are in the center of organic solar cell research. Here, we developed a non-monotonic intermediate state manipulation strategy for state-of-the-art organic solar cells by employing 1,3,5-trichlorobenzene as crystallization regulator, which optimizes the film crystallization process, regulates the self-organization of bulk-heterojunction in a non-monotonic manner, i.e., first enhancing and then relaxing the molecular aggregation. As a result, the excessive aggregation of non-fullerene acceptors is avoided and we have achieved efficient organic solar cells with reduced non-radiative recombination loss. In PM6:BTP-eC9 organic solar cell, our strategy successfully offers a record binary organic solar cell efficiency of 19.31% (18.93% certified) with very low non-radiative recombination loss of 0.190 eV. And lower non-radiative recombination loss of 0.168 eV is further achieved in PM1:BTP-eC9 organic solar cell (19.10% efficiency), giving great promise to future organic solar cell research.

14 SOLAR ENERGY↗