Search NASA⌕ Search

SEARCH · Search NASA

Results for “redox catalysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Concerted Proton–Electron Transfer Minimizes Substituent Effects on Adsorbed Phthalocyanine Electrocatalysis

Molecularly modified electrodes (MMEs) are potent electrocatalysts, but few principles exist for their rational design. Electrocatalysis by soluble molecules depends strongly on substituents that tune the catalyst redox potential (E 1/2 ), but it is unclear if this parameter similarly impacts MME catalysis. Herein, we employ the hydrogen evolution reaction (HER) as a test case for comparing carbon-adsorbed cobalt phthalocyanine (CoPc/C) and cobalt hexadecafluoro-phthalocyanine (CoFPc/C). By correlating HER activity and voltammetric data to total Co surface concentration across a wide range of catalyst loadings, we find that only 5–25% of adsorbed Co sites contribute to the Co(II/I) redox wave and that this subpopulation poorly correlates with catalytic activity. Instead, in the low-loading limit, catalytic activity correlates linearly with the majority Co(II/I)-silent Co population, revealing per-site turnover frequency (TOF) values for HER. Despite a 230 mV difference in Co(II/I) redox potentials, CoPc/C and CoFPc/C display TOF values differing by less than a factor of 3 when compared over a wide potential range. Mechanistic studies point to an inner-sphere concerted proton–electron transfer step as rate-determining, suggesting that the Co–H bond dissociation free energy (BDFE) rather than the Co(II/I) E 1/2 is thermodynamically relevant. Computational studies indicate that the fluoro-substituents lead to compensatory changes in Co(II/I) E 1/2 and Co(I) basicity, leaving the Co–H BDFE largely unchanged between CoPc and CoFPc and thereby manifesting in similar catalytic rates. Furthermore, these results highlight the limited effect of E 1/2 -tuning on MME catalytic activity and motivate the development of methods to directly alter active site–substrate BDFE.

Catalysts↗
DOE OSTI2022

Thermal Hydroquinone Oxidation on Co/N-doped Carbon Proceeds by a Band-Mediated Electrochemical Mechanism

Molecules catalyze aerobic oxidation reactions via redox cycling at the metal center to effect sequential activation of O 2 and the substrate. Metal surfaces can catalyze the same transformations by coupling independent half-reactions for oxygen reduction and substrate oxidation mediated via the exchange of band-electrons. Metal/nitrogen-doped carbons (MNCs) are promising catalysts for aerobic oxidation that consist of molecule-like active sites embedded in a conductive carbon host. Owing to their combining molecular and metallic features, it remains unclear whether they proceed via the sequential redox cycling pathways of molecules or the band-mediated pathways of metals. Herein, we simultaneously track the potential of the catalyst and the rate of the turnover of aerobic hydroquinone oxidation on a cobalt-based MNC catalyst contacted to a catalytically inactive carbon electrode. By comparing operando measurements of rate and potential with the current-voltage behavior of each constituent half-reaction under identical conditions, we show that these molecular materials can display the band-mediated reaction mechanisms of extended metallic solids. Further, we show that the action of these band-mediated mechanisms explains fractional reaction orders in both oxygen and hydroquinone, the time evolution of catalyst potential and rate, and the dependence of rate on overall reaction free energy. Selective poisoning experiments suggest that oxygen reduction proceeds at cobalt sites, whereas quinone oxidation proceeds at native oxidic defects on the carbon. These findings highlight that molecule-like active sites can take advantage of band-mediated mechanisms when coupled to conductive hosts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Selective CO 2 Reduction by Bis(bipyridine)cobalt(II) Catalysts: The Role of Pendant Pyridine as a Proton Acceptor

Electrochemical CO 2 reduction reaction (CO 2 RR) catalyzed by molecular earth-abundant metal catalysts is a promising strategy to convert CO 2 into value-added products. One recent trend in this field has been focusing on the rational design of catalysts by incorporating redox-active ligands and modifying the secondary coordination sphere (SCS) to achieve efficient and selective CO 2 RR. Herein, we report a series of Co bis­(bipyridine) catalysts featuring various dangling groups, such as pyridine, tertiary amine, or butyl, in the secondary coordination sphere (Co-PyMe, Co-Py, Co-PrN, and Co-Bu). Efficient, selective electrocatalytic CO 2 RR was achieved by the complexes after the generation of triply reduced intermediate consisting of a Co I center and a dianionic ligand, producing CO as the major product and trace amount of H 2 . Strong correlations with the identity of dangling groups and turnover frequency (TOF) have been observed, in which Co-PyMe displayed the highest TOF (1086 s –1 in MeCN/H 2 O). Mechanistic studies indicated that the acceleration of CO 2 RR with pyridine-functionalized catalysts were derived from the protonation of pyridine dangling groups which participated as weak acids in the H-bonding network with exogenous proton sources, stabilizing CO 2 -bound intermediates and facilitating proton transfer. In addition, precatalytic CO 2 binding and activation at the third reduction (−2.1 V) was revealed by CV and SEC-IR studies. The resultant doubly reduced CO-bound species acted as a trapping state which inhibited CO 2 RR electrocatalysis. Regeneration of active species was accessed via reductive dissociation of CO at a more negative potential. In conclusion, this study highlights the combined effects of redox-active ligands and pyridine/pyridinium as SCS groups on CO 2 RR catalysis and provides design principles for future development of CO 2 RR catalysts utilizing pyridine/pyridiniums as SCS functional groups to fine-tune the catalytic activity.

CO2 reduction↗
DOE OSTI2025

Water effects on NH 3 -SCR over Cu-based small-pore zeolite catalysts: A review

The selective catalytic reduction (SCR) of NO x with NH 3 as the reductant over small-pore Cu-zeolite catalysts is a leading strategy for controlling emissions from diesel engines and mobile sources. While the hydrothermal stability of Cu-zeolites such as Cu-SSZ-13, Cu-SAPO-34, and Cu-SSZ-39 has been extensively studied, the multifaceted role of water vapor under operating conditions has only recently received systematic attention. Water impacts multiple aspects of SCR catalysis, including NO x conversion, N 2 O formation, Cu ion speciation, redox kinetics, and surface reactions. This review comprehensively summarizes recent advances in understanding the effect of water on NH 3 -SCR over Cu-based catalysts. For Cu-SSZ-13, water vapor induces both inhibitory and promotive effects depending on temperature, Cu loading, and Si/Al ratio by altering NH 3 adsorption, Cu mobility, and redox half-cycle kinetics. Studies have revealed that water can suppress ammonium nitrate formation at low temperatures and enhance nitrate pathways at higher temperatures. Over Cu-SAPO-34, water promotes NO conversion by improving Cu(II) reducibility and strengthening Brønsted acidity. First-principles calculations confirm that water-coordinated Cu species lower O 2 activation barriers. In Cu-SSZ-39, water was found to facilitate Cu reduction, migration, and O 2 activation, resulting in superior water tolerance and unexpected catalytic promotion. Both experimental and computational studies highlight that water vapor exerts complex, catalyst-dependent effects on NH 3 -SCR performance, underscoring the need for tailored catalyst designs that leverage beneficial water interactions while minimizing inhibitory impacts.

Ammonia selective catalytic reduction↗
DOE OSTI2021

Oriented Electrostatic Effects on O 2 and CO 2 Reduction by a Polycationic Iron Porphyrin

Next-generation energy technologies require improved methods for rapid and efficient chemical-to-electrical energy transformations. One new approach has been to include atomically-positioned, electrostatic motifs in molecular catalysts to stabilize high-energy, charged intermediates. For example, an iron porphyrin bearing four cationic, ortho-N,N,N-trimethylanilinium groups (o-[N(CH 3 ) 3 ] + ) has recently been used to catalyze the complex, multi-step O 2 and CO 2 reduction reactions (ORR and CO 2 RR) with fast rates and at low overpotentials. The success of this catalyst is attributed, at least in part, to specific charge-charge interactions between the atomically-positioned o-[N(CH 3 ) 3 ] + groups and the bound substrate. However, by nature of the mono-ortho substitution pattern, there are four possible atropisomers of this metalloporphyrin and thus four unique electrostatic environments. This work reports that each of the four individual atropisomers catalyzes both the ORR and CO 2 RR with fast rates and low overpotentials. The maximum turnover frequencies (TOF max ) vary among the atropisomers, by a factor of 60 for the ORR and a factor of 5 for CO 2 RR. For the ORR, the αβαβ isomer is the fastest and has the highest overpotential, while for the CO 2 RR, the order is reversed and the αααα isomer is the fastest and has the highest overpotential. The role of charge-positioning is complex and can affect more than a single step such as CO 2 binding. These data offer a first-of-a-kind perspective on atomically positioned charge and highlight the significance of high charge density, rather than orientation, on the thermodynamics and kinetics of multistep molecular electrochemical transformations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Cooperative Effects Drive Water Oxidation Catalysis in Cobalt Electrocatalysts through the Destabilization of Intermediates

A barrier to understanding the factors driving catalysis in the oxygen evolution reaction (OER) is understanding multiple over- lapping redox transitions in the OER catalysts. The complexity of these transitions obscure the relationship between the coverage of adsorbates and OER kinetics, leading to an experimental challenge in measuring activity descriptors, such as binding energies, as well as adsorbate interactions, which may destabilize intermediates and modulate their binding energies. Herein, we utilize a newly designed optical spectroelectrochemistry system to measure these phenomena in order to contrast the behavior of two electrocatalysts, cobalt oxyhydroxide (CoOOH) and cobalt-iron hexacyanoferrate (cobalt-iron Prussian blue, CoFe-PB). Three distinct optical spectra are observed in each catalyst, corresponding to three separate redox transitions, the last of which we show to be active for the OER using time-resolved spectroscopy and electrochemical mass spectroscopy. By combining predictions from density functional theory with parameters obtained from electroadsorption isotherms, we demonstrate that a destabilization of catalytic intermediates occurs with increasing coverage. In CoOOH, a strong (~0.34 eV/ monolayer) destabilization of a strongly bound catalytic intermediate is observed, leading to a potential offset between the accumulation of the intermediate and measurable O 2 evolution. We contrast these data to CoFe-PB, where catalytic intermediate generation and O 2 evolution onset coincide due to weaker binding and destabilization (~0.19 eV/monolayer). By considering a correlation between activation energy and binding strength, we suggest that such adsorbate driven destabilization may account for a significant fraction of the observed OER catalytic activity in both materials. Finally, we disentangle the effects of adsorbate interactions on state coverages and kinetics to show how adsorbate interactions determine the observed Tafel slopes. Crucially, the case of CoFe-PB shows that, even where interactions are weaker, adsorption remains non-Nernstian, which strongly influences the observed Tafel slope.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Infrared reflection absorption spectroscopy and temperature-programmed desorption studies of CO adsorption on Ni/CeO 2 (111) thin films: The role of the ceria support

Ceria-supported Ni has shown unique catalytic activity due to unique properties of small Ni particles and strong metal-support interaction. Identification of adsorption sites and understanding the chemical interaction over Ni-ceria at the fundamental level provide crucial insights into the reaction pathways of complex catalytic processes. In this study, to probe the surface sites, the adsorption of CO was carried out with model Ni/ceria systems consisting of Ni nanoparticles vapor-deposited on well-ordered CeO x (111) (1.5 < x < 2) thin films using infrared reflection absorption spectroscopy (IRRAS) and temperature-programmed desorption (TPD) under ultrahigh vacuum (UHV) conditions. Fully oxidized CeO 2 (111) (Ce 4+ ) and partially reduced CeO 1.75 (111) (Ce 4+ /Ce 3+ ) thin films were grown on Ru(0001) to examine the role of the ceria support. Additionally, Ni with low coverages (e.g., 0.2 ML) grows forming small two-dimensional particles on ceria at 300 K, which develop into three-dimensional clusters after heating to 700 K. In the absence of Ni, CO adsorption at 1 mTorr at 100 K shows distinct IR bands at 2158 cm -1 on CeO 2 and 2165 cm -1 on CeO 1.75 . Bridging and atop IR bands associated with CO adsorption over metallic Ni were observed on the Ni-CeO 1.75 surface at 300 K under UHV conditions. CO adsorption over Ni 0 was also observed over as-deposited Ni on CeO 2 . However, a new IR band at 2146 cm -1 due to CO adsorption over Ni 2+ species was detected at 100 K over the annealed Ni particles on CeO 2 . CO IRRAS data suggest the oxidation of Ni to Ni 2+ on CeO 2 and the formation of predominant Ni 2+ species with heating, which is further confirmed with CO TPD data and previous x-ray photoelectron spectroscopy results.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Time-Gated Raman Spectroscopy (Intern Final Report)

Time-gated Raman spectroscopy is a powerful tool for rapid non-destructive analysis of chemical compounds, particularly when combined with other investigative methods. Time-gating the signal obtained from a sample during Raman spectroscopy allows for the removal of background emission and black body radiation, improving clarity and accuracy of scans. The main objectives of this project were to prove the lab’s time-gated Raman spectroscopy system works as proof of concept and to make select improvements to the in-house LabVIEW software used to run the time-gated system. This time-gated system will be added to the CTK’s TAP reactors in the future, but this is out of the scope of this internship project. This research is important, as understanding the mechanisms behind catalysts leads to designing better systems/materials and the perfection of catalysts, and energy-efficient chemical manufacturing is key when designing a greener future. The research for this project was done with samples at both ambient conditions in sample holders and at operando conditions (i.e., high temperature, unsteady-state) inside a small-volume chemical reactor. Numerous spectro-kinetic scans of the catalysts were obtained, but the advanced dynamics of these systems are still being interpreted. There is data that demonstrates that the time-gated system is correctly rejecting emission from samples, and one can observe real-time changes in the signal from the sample, due to coking or changes induced by redox chemistry. Chemical manufacturers and the planet are the main beneficiaries of catalysis research, as better catalysts will reduce carbon emissions.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Modeling Absolute Redox Potentials of Ferrocene in the Condensed Phase

Absolute thermodynamic quantities for critical chemical reactions are needed to determine the role of solvents and reactive environments in catalysis and electrocatalysis beyond the relative scales typically employed. In principle, theoretical methods can provide such quantification but are often hindered by the innate complexity of strong electron correlation and dynamic relaxation of solvent environments. Here, we present and validate a protocol for calculating the redox potentials of ferrocene/ferrocenium redox pair in the acetonitrile. Equation-of-motion ionization potential coupled-cluster single-double (EOM-IP-CCSD) and effective fragment potential (EFP) methods are used to characterize the adiabatic and vertical ionization potentials (IP) as well as the electron affinity processes. We benchmark molecular mechanics against the EFP model to show the differences in ferrocene electronic polarizability in two redox states. Our best estimate of the redox potential (4.94 eV) agrees well with the experimental value (4.93 eV). This demonstrated the ability of modern computational methods to predict absolute redox potentials quantitatively and, more critically, quantify the correlation of dynamic effects, which underlie their origin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Proton, Electron, and Hydrogen-Atom Transfer Thermodynamics of the Metal–Organic Framework, Ti-MIL-125, Are Intrinsically Correlated to the Structural Disorder

Interfacial charge transfer reactions involving protons and/or electrons are fundamental to heterogeneous catalysis and many other reactions relevant to energy, chemical, and biological sectors. Metal–organic frameworks (MOFs) with redox-active metal-oxo nodes have emerged as candidate materials to examine these reactions with near-atomic-level precision, given their crystalline nature. Here, we employed a colloidally stable, Ti-based MOF, Ti-MIL-125, with different crystal sizes to examine catalytically relevant charge transfer thermodynamics. The Ti 8 (μ 2 -O) 8 (μ 2 -OH) 4 nodes structurally mimic TiO 2 , which has shown some PCET reactivity toward reactions of H 2 , O 2 , and others. In this report, we have demonstrated that a change in crystal size induces different amounts of structural disorder to the Ti-oxo node, further changing the thermodynamics of proton/electron/hydrogen-atom transfer reactions. Using electrochemical open-circuit potential (E OCP ) measurements, we have determined that all crystallites undergo a 1H + /1e – redox reaction, which, given the stoichiometry, can be considered as a net H atom transfer (HAT) reaction. The thermodynamics of this HAT reaction, the Ti 3+ O–H bond dissociation free energy (BDFE), was dependent on the crystal size of the MOF, as the decrease in crystal size induced more structural disorder. Our computational calculations have indicated that this difference in BDFE is due to a local change in the geometry of Ti cations, rather than the commonly invoked defects, such as the “missing-linker” defect sites. Individual proton/electron transfer (PT/ET) thermodynamics were also highly dependent on the crystal sizes. These were probed using pK a or band gaps (E g ), respectively. These findings suggest that, particularly when MOFs are nanosized with a large amount of structural disorder, they should no longer be considered “true” single-site catalysts; this is an implicit, but widespread assumption within the MOF-based catalysis field. Implications of these findings will be contrasted with structurally similar metal oxides like TiO 2 and other redox-active MOFs.

Bond dissociation free energy↗
DOE OSTI2024

Laser-engraved defects in TiO 2 support: Enhancing reducibility and redox capability of Pt/TiO 2 catalyst for reactive and selective hydrogenation

Titanium dioxide (TiO 2 ) has been studied as catalyst or catalyst support in catalysis. Its synthesis or modification approach controls the structural, optical, and electronic properties. Here, in this work, we applied laser engraving to the anatase TiO 2 and studied the consequent changes in its structure and property as well as the properties of TiO 2 supported platinum (i.e., Pt/TiO 2 ) catalyst. The laser engraving enlarged the particle size, formed rutile phase and created defects (i.e., oxygen vacancy (O v ) and Ti 3+ ) in anatase TiO 2 . This induced band gap change and enhanced visible light absorption. The defects created by laser engraving are stable and more reducible than those existed in the pristine TiO 2 . The defective TiO 2 is structurally stable and has great redox properties. The metal-support interaction in the Pt/defective TiO 2 catalyst is stronger than that of the pristine Pt/TiO 2 catalyst, which enabled higher reactivity and selectivity in hydrogenation of 3-nitrostyrene and furfuryl alcohol. Laser-engraved TiO 2 has been rarely studied for thermal catalysis. This work provides basic understanding of material properties and catalysis application of laser-engraved catalyst supports and catalysts in field of thermal catalysis.

25 ENERGY STORAGE↗
DOE OSTI2025

Lowering the barrier to access information-rich transient kinetic data for machine learning methods

Transient kinetic data contain a wealth of information about intrinsic features of a catalyst as well as the reaction mechanism. Currently, high volume transient data is underutilized, and data science methods could both increase the value of information that can be extracted from this data, integrate experimental with theoretical data sources, and accelerate the pace of catalyst technology advancement. Transient kinetic characterizations with simple probe molecules exhibiting reversible adsorption, irreversible adsorption and bulk-surface diffusion are presented as training components for similar experiments with more complex surface reactions. In conclusion, by increasing the availability and accessibility of transient kinetic data through details of its structure and acquisition, we aim to decrease the barrier for data scientists to apply machine learning methods to this valuable data source.

Catalysis↗
DOE OSTI2025

Cobalt(II) Phthalocyanine Substituents Tune the Electrocatalytic CO 2 Conversion to Methanol

Cobalt phthalocyanine (Co(II)Pc) and its derivatives are promising molecular electrocatalysts for the electrochemical reduction of CO 2 to CO and methanol (CH 3 OH). Despite increasing interest, a detailed mechanistic understanding of how ligand substituents influence catalytic activity, selectivity, and efficiency remains limited. In this study, we employ density functional theory (DFT) to systematically investigate the influence of electron-donating groups (EDGs) and electron-withdrawing groups (EWGs) on the electronic structure and redox properties of the Co(II)Pc electrocatalyst, and to elucidate CO 2 RR mechanistic pathways. Our results reveal that EWGs cause a positive shift in the reduction potentials, favor CO 2 binding over protonation of the Co metal center and promote downstream methanol formation at mild potentials. EDGs show opposite trends including favorable protonation steps, promoting a negative shift in the reduction potential, and facilitating the hydrogen evolution reaction (HER), which competes with the desired CO 2 RR pathway. Notably, CO dissociation is thermodynamically and kinetically unfavorable across all systems, positioning the redox potential versus CO dissociation energy as a key factor for methanol selectivity. Furthermore, these insights provide a predictive framework for rational catalyst design and underscore the critical role of electronic tuning in advancing molecular electrocatalysts for sustainable CO 2 conversion.

Alcohols↗
DOE OSTI2021

Navigating Transition-Metal Chemical Space: Artificial Intelligence for First-Principles Design

Conspectus The variability of chemical bonding in open-shell transition-metal complexes not only motivates their study as functional materials and catalysts but also challenges conventional computational modeling tools. Here, tailoring ligand chemistry can alter preferred spin or oxidation states as well as electronic structure properties and reactivity, creating vast regions of chemical space to explore when designing new materials atom by atom. Although first-principles density functional theory (DFT) remains the workhorse of computational chemistry in mechanism deduction and property prediction, it is of limited use here. DFT is both far too computationally costly for widespread exploration of transition-metal chemical space and also prone to inaccuracies that limit its predictive performance for localized d electrons in transition-metal complexes. These challenges starkly contrast with the well-trodden regions of small-organic-molecule chemical space, where the analytical forms of molecular mechanics force fields and semiempirical theories have for decades accelerated the discovery of new molecules, accurate DFT functional performance has been demonstrated, and gold-standard methods from correlated wavefunction theory can predict experimental results to chemical accuracy. The combined promise of transition-metal chemical space exploration and lack of established tools has mandated a distinct approach. In this Account, we outline the path we charted in exploration of transition-metal chemical space starting from the first machine learning (ML) models (i.e., artificial neural network and kernel ridge regression) and representations for the prediction of open-shell transition-metal complex properties. The distinct importance of the immediate coordination environment of the metal center as well as the lack of low-level methods to accurately predict structural properties in this coordination environment first motivated and then benefited from these ML models and representations. Once developed, the recipe for prediction of geometric, spin state, and redox potential properties was straightforwardly extended to a diverse range of other properties, including in catalysis, computational “feasibility”, and the gas separation properties of periodic metal–organic frameworks. Interpretation of selected features most important for model prediction revealed new ways to encapsulate design rules and confirmed that models were robustly mapping essential structure–property relationships. Encountering the special challenge of ensuring that good model performance could generalize to new discovery targets motivated investigation of how to best carry out model uncertainty quantification. Distance-based approaches, whether in model latent space or in carefully engineered feature space, provided intuitive measures of the domain of applicability. With all of these pieces together, ML can be harnessed as an engine to tackle the large-scale exploration of transition-metal chemical space needed to satisfy multiple objectives using efficient global optimization methods. In practical terms, bringing these artificial intelligence tools to bear on the problems of transition-metal chemical space exploration has resulted in ML-model assessments of large, multimillion compound spaces in minutes and validated new design leads in weeks instead of decades.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Transition Metal Dichalcogenides as Effective Catalysts for High-Rate Lithium–Sulfur Batteries

In today’s renaissance of high energy density secondary batteries, lithium-sulfur (Li-S) batteries represent one of the most promising candidates for the next generation of renewable energy storage systems, due to sulfur’s high theoretical specific capacity of 1675 mAh g -1 and high earth abundance. However, despite decades of study, the issues associated with capacity fade via the polysulfide shuttle and sluggish kinetics remain. Through a rigorous and detailed electrochemical study of lithium polysulfides via rotating disk electrode voltammetry (RDE), we have investigated the kinetics of the redox reactions, and explored candidate catalysts to potentially overcome/mitigate the polysulfide shuttle effect. From these RDE studies, supported by comprehensive electronic-structure calculations of conversion-type surface reactions, we determined that WSe 2 can effectively catalyze the polysulfide redox reaction, though further studies are necessary to improve overall Li-S battery performance.

25 ENERGY STORAGE↗
DOE OSTI2020

A review of the interactions between ceria and H2 and the applications to selective hydrogenation of alkynes

Cerium oxide (ceria) has found a wide variety of applications in catalysis including as a catalyst, a modifier, or a support, largely thanks to its robust redox properties and versatile acid-base function. While it is often utilized for oxidation reactions, ceria has recently attracted intense research interest for its unusual ability to selectively hydrogenate alkynes to alkenes. The intriguing hydrogenation ability of ceria has sparked renewed research efforts to understand how pure ceria works as a hydrogenation catalyst. In this review, recent advances in both experimental and computational studies of ceria are summarized, focusing on the interaction of ceria with H 2 and in hydrogenation reactions. Significant insights from various studies including in situ spectroscopy/microscopy and theoretic modeling of ceria in hydrogen-involved reactions are discussed, which shed light on the origin of the hydrogenation ability of ceria and the reaction mechanisms involved in ceria-catalyzed alkyne hydrogenation. Ways to further improve both the mechanistic understanding and catalytic performance of ceria-based materials for hydrogenation reactions are proposed at the end in the summary and outlook section.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Heavy chalcogenide-transition metal clusters as coordination polymer nodes

While metal–oxygen clusters are widely used as secondary building units in the construction of coordination polymers or metal–organic frameworks, multimetallic nodes with heavier chalcogenide atoms (S, Se, and Te) are comparatively untapped. The lower electronegativity of heavy chalcogenides means that transition metal clusters of these elements generally exhibit enhanced coupling, delocalization, and redox-flexibility. Leveraging these features in coordination polymers provides these materials with extraordinary properties in catalysis, conductivity, magnetism, and photoactivity. In this perspective, we summarize common transition metal heavy chalcogenide building blocks including polynuclear metal nodes with organothiolate/selenolate or anionic heavy chalcogenide atoms. Based on recent discoveries, we also outline potential challenges and opportunities for applications in this field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗