Search NASA⌕ Search

SEARCH · Search NASA

Results for “reference materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Columbia Accident Investigation Board Report

The Columbia Accident Investigation Board's independent investigation into the tragic February 1, 2003, loss of the Space Shuttle Columbia and its seven-member crew lasted nearly seven months and involved 13 Board members, approximately 120 Board investigators, and thousands of NASA and support personnel. Because the events that initiated the accident were not apparent for some time, the investigation's depth and breadth were unprecedented in NASA history. Further, the Board determined early in the investigation that it intended to put this accident into context. We considered it unlikely that the accident was a random event; rather, it was likely related in some degree to NASA's budgets, history, and program culture, as well as to the politics, compromises, and changing priorities of the democratic process. We are convinced that the management practices overseeing the Space Shuttle Program were as much a cause of the accident as the foam that struck the left wing. The Board was also influenced by discussions with members of Congress, who suggested that this nation needed a broad examination of NASA's Human Space Flight Program, rather than just an investigation into what physical fault caused Columbia to break up during re-entry. Findings and recommendations are in the relevant chapters and all recommendations are compiled in Chapter 11. Volume I is organized into four parts: The Accident; Why the Accident Occurred; A Look Ahead; and various appendices. To put this accident in context, Parts One and Two begin with histories, after which the accident is described and then analyzed, leading to findings and recommendations. Part Three contains the Board's views on what is needed to improve the safety of our voyage into space. Part Four is reference material. In addition to this first volume, there will be subsequent volumes that contain technical reports generated by the Columbia Accident Investigation Board and NASA, as well as volumes containing reference documentation and other related material.

Gehman, Harold W., Jr.↗
DOE OSTI2024

Progress in development of characterization capabilities to evaluate candidate materials for direct air capture applications

As part of U.S. national efforts to combat the detrimental effect of global climate change, the National Institute of Standards and Technology (NIST) was recently tasked to support efforts in direct air capture (DAC) of carbon dioxide research and deployment. In order to develop test procedures, materials, and documentary standards, key characterization methods relevant to DAC materials have been investigated and used to identify desirable properties for a potential Standard Reference Material (SRM). Select amine-supported materials that previously showed potential for DAC applications have been characterized using commonly available laboratory methods. Further insights into the adsorption characteristics have been gained from developing and applying more specialized characterization tools ideal for probing low concentrations of carbon dioxide. A broad suite of capabilities that examine relevant properties under appropriate conditions gives the most profound insights into a material's specific performance. We advocate for even more specialized capabilities to be developed and standardized to quantitatively monitor the interactions of CO 2 with molecular species in complex and often disordered systems to advance DAC and support carbon dioxide reduction (CDR) in general.

carbon dioxide↗
NASA NTRS1954

Review of Information on Induced Flow of a Lifting Rotor

A brief review of the available information relating to induced flow of a lifting rotor is presented . The available material is summarized in a table as to flight condition, type of information, source, and the reference papers in which the data can be found. Some representative aspects of some of the reference material are discussed.

Alfred Gessow↗
NASA NTRS1980

Explosive materials equivalency, test methods and evaluation

Attention is given to concepts of explosive equivalency of energetic materials based on specific airblast parameters. A description is provided of a wide bandwidth high accuracy instrumentation system which has been used extensively in obtaining pressure time profiles of energetic materials. The object of the considered test method is to determine the maximum output from the detonation of explosive materials in terms of airblast overpressure and positive impulse. The measured pressure and impulse values are compared with known characteristics of hemispherical TNT data to determine the equivalency of the test material in relation to TNT. An investigation shows that meaningful comparisons between various explosives and a standard reference material such as TNT should be based upon the same parameters. The tests should be conducted under the same conditions.

Koger, D. M.↗
NASA NTRS2009

Overview of Figure of Merit Analyses of Simulants and the Fit-to-Use Matrix

This slide slide presentation reviews the lunar regolith simulants and presents a comparison of the different types and their uses. Figures of Merit (FoM) algorithms have been developed to quantitatively compare the distributions in different granular materials. These algorithms have been used to compare the different lunar regolith simulants to the Apollo 16 reference material for composition and particle size distribution. The results of this comparison of the various forms of lunar regolith simulants are examined.

Schrader, Christian M.↗
NASA NTRS1974

Liquid rocket engine turbopump gears

Design and fabrication of gear drives for rocket engine turbopumps are described in the sequence encountered during the design process as follows: (1) selection of overall arrangement; (2) selection of gear type; (3) preliminary sizing; (4) lubrication system design; (5) detail tooth design; (6) selection of gear materials; and (7) gear fabrication and testing as it affects the design. The description is oriented towards the use of involute spur gears, although reference material for helical gears is also cited.

Source record↗
NASA NTRS1992

A chronology of the on-orbit pointing control system changes on the Hubble Space Telescope and associated pointing improvements

The pointing control system on the Hubble Space Telescope was designed to keep an image stable in the focal plane to 0.007 arc seconds (rms) for observations lasting from seconds to hours. Following the on-orbit deployment, this level of pointing performance was achieved only for short intervals during each orbit because of unexpected disturbances originating in the Solar Arrays. Since this problem was first recognized, several control system redesigns have been carried out and uplinked to the spacecraft with increasing degrees of success. This paper presents a chronology of those activities. In addition, sufficient background material is included regarding the pointing control system and the Solar Array disturbance so that the contents can be understood without reverting to the details in the reference material.

Sharkey, J. P.↗
NASA NTRS1999

Stirling Space Engine Program: Appendixes A, B, C and D - Volume 2

The objective of this program was to develop the technology necessary for operating Stirling power converters in a space environment and to demonstrate this technology in full-scale engine tests. Volume 2 of the report includes the following appendices: Appendix A: Heater Head Development (Starfish Heater Head Program, 1/10th Segment and Full-Scale Heat Pipes, and Sodium Filling and Processing); Appendix B: Component Test Power Converter (CTPC) Component Development (High-temperature Organic Materials, Heat Exchanger Fabrication, Beryllium Issues, Sodium Issues, Wear Couple Tests, Pressure Boundary Penetrations, Heating System Heaters, and Cooler Flow Test); Appendix C: Udimet Testing (Selection of the Reference Material for the Space Stirling Engine Heater Head, Udimet 720LI Creep Test Result Update, Final Summary of Space Stirling Endurance Engine Udimet 720L1 Fatigue Testing Results, Udimet 720l1 Weld Development Summary, and Udimet 720L1 Creep Test Final Results Summary), and Appendix D: CTPC Component Development Photos.

Dhar, Manmohan↗
NASA NTRS1973

Nondestructive evaluation technique guide

A total of 70 individual nondestructive evaluation (NDE) techniques are described. Information is presented that permits ease of comparison of the merits and limitations of each technique with respect to various NDE problems. An NDE technique classification system is presented. It is based on the system that was adopted by the National Materials Advisory Board (NMAB). The classification system presented follows the NMAB system closely with the exception of additional categories that have been added to cover more advanced techniques presently in use. The rationale of the technique is explained. The format provides for a concise description of each technique, the physical principles involved, objectives of interrogation, example applications, limitations of each technique, a schematic illustration, and key reference material. Cross-index tabulations are also provided so that particular NDE problems can be referred to appropriate techniques.

Vary, A.↗
NASA NTRS1987

High Temperature Properties of an Alumina Enhanced Thermal Barrier

The heatshield material requirements for future space vehicles (Aerobraking Orbital Transfer Vehicle & National Aerospace Plane) will depend upon the desired flight capability, configuration and location on the vehicle. These requirements will be more demanding and different from those derived for the materials used in the Shuttle Orbiter thermal protection system. Research was therefore initiated into improving the thermal efficiency of this class of materials by first characterizing their thermal and structural capabilities. Alternate material systems have been developed, tested, and compared with the baseline Shuttle system. This research resulted in the development of several very low density, high porosity (80-90%) materials with enhanced durability and temperature capability. One of the developments was a family of materials referred to as Fibrous Refractory Composite Insulation (FRCI) utilizing a mixture of fibers, each serving a unique purpose. One composition of the FRCI family with two fibers was adopted as a baseline material for use on the third and fourth Orbiters in selected areas due to its strength at a lower density compared to earlier materials. A further improvement in the FRCI family of materials is the Alumina Enhanced Thermal Barrier (AETB), a three-fiber composite. It has a higher temperature capability (composition dependent) than the baseline FRCI as proven by convective heating tests of one composition. AETB was studied to better characterize its performance at high temperature and the mechanisms by which its properties change. In conclusion, the shrinkage of AETB is a factor of six better than baseline FRCI at 1260 C (2300 F) with about a 20% improvement in mechanical properties. This improvement could translate into a 110 C (200 F) higher temperature capability in use as a heat shield material, but further testing in a convective heating environment is required to determine the actual improvement attainable.

Leiser, Daniel B.↗
DOE OSTI2025

Multi-material ALE remap with interface sharpening using high-order matrix-free finite element methods

The arbitrary Lagrangian-Eulerian (ALE) technique involves remapping field quantities from a Lagrangian mesh to an optimized mesh in a conservative, accurate and bounds-preserving manner. For methods based on arbitrary order finite elements, as described in a reference, material volume fractions are advected in pseudo-time using flux-corrected transport (FCT) without any form of interface reconstruction. In practice, this can lead to excessive propagation of small volume fractions throughout the domain. In addition, this method requires assembly of a global advection matrix to compute the bounds-preserving low-order FCT solution. In this work, we introduce a new approach for ALE remap using a high-order matrix-free technique which incorporates a flux modification to sharpen material interfaces in a conservative manner. Our approach begins with computing a bounds-preserving low-order solution to the ALE remap equations at the element level. We then compute a sharp interface solution (not guaranteed to be bounds-preserving) which comes from solving an augmented version of the ALE remap equations with a conservative flux modification which acts to sharpen material volume fractions based on their gradients and transport directions. Using the sharp interface solution, we make global corrections to the bounds-preserving solution while maintaining preservation of bounds. By blending with the sharpened solution at the global level we are able to globally conserve mass without hindering the remap pseudo-time step. This new interface-aware ALE remap method is based entirely on partial assembly techniques where globally assembled matrix operators are no longer needed, resulting in a globally matrix-free FCT method for multi-material, multi-field ALE remap with high performance on GPU architectures. We present results of our new remap method on 1D, 2D and 3D benchmarks and describe the algorithmic tailoring for GPU architectures that was developed.

Vargas, Arturo [Lawrence Livermore National Labora↗
NASA NTRS1963

Survey of the Physical and Environmental Parameters of the Moon

This document presents, in summary, a compilation of the physical and environmental parameters of the moon. A determined attempt has been made to be objective at all times. Many of the physical sciences are presented in sufficient depth to adequately identify the basic information available. It is expected that the appropriate references will be consulted when additional detail is required. It is obvious both from the text and the reference material that divergent opinions prevail and uncertainties exist in almost every phase of lunar science; e.g., the existence of the lunar bulge, the thickness of the dust layer, etc. No pretense is made to resolve these differences, but by bringing together many references, it is hoped that some contribution will be made in lunar science. The subject index will be of particular value since it relates the reference section by subject. A glossary of terms used throughout the text is also provided.

Niedz, F. J.↗
NASA NTRS2006

Earth's Earliest Ecosystems in the C: The Use of Microbial Mats to Demonstrate General Principles of Scientific Inquiry and Microbial Ecology

Microbial mats are living examples of the most ancient biological communities on Earth. As Earth's earliest ecosystems, they are centrally important to understanding the history of life on our planet and are useful models for the search for life elsewhere. As relatively compact (but complete) ecosystems, microbial mats are also extremely useful for educational activities. Mats may be used to demonstrate a wide variety of concepts in general and microbial ecology, including the biogeochemical cycling of elements, photosynthesis and respiration, and the origin of the Earth's present oxygen containing atmosphere. Microbial mats can be found in a number of common environments accessible to teachers, and laboratory microbial mats can be constructed using materials purchased from biological supply houses. With funding from NASA's Exobiology program, we have developed curriculum and web-based activities centered on the use of microbial mats as tools for demonstrating general principles in ecology, and the scientific process. Our web site (http://microbes.arc.nasa.gov) includes reference materials, lesson plans, and a "Web Lab", featuring living mats maintained in a mini-aquarium. The site also provides information as to how research on microbial mats supports NASA's goals, and various NASA missions. A photo gallery contains images of mats, microscopic views of the organisms that form them, and our own research activities. An animated educational video on the web site uses computer graphic and video microscopy to take students on a journey into a microbial mat. These activities are targeted to a middle school audience and are aligned with the National Science Standards.

Bebout, Brad M.↗
NASA NTRS2014

Investigation of Backside Textures for Genesis Solar Wind Silicon Collectors

Genesis solar wind collectors were comprised of a suite of 15 types of ultrapure materials. The single crystal, pure silicon collectors were fabricated by two methods: float zone (FZ) and Czochralski (CZ). Because of slight differences in bulk purity and surface cleanliness among the fabrication processes and the specific vendor, it is desirable to know which variety of silicon and identity of vendor, so that appropriate reference materials can be used. The Czochralski method results in a bulk composition with slightly higher oxygen, for example. The CZ silicon array wafers that were Genesis-flown were purchased from MEMC Electronics. Most of the Genesis-flown FZ silicon was purchased from Unisil and cleaned by MEMC, although a few FZ wafers were acquired from International Wafer Service (IWS).

Gonzalez, C. P.↗
NASA NTRS1966

Theory and Practical Design of Phase-locked Receivers, Volume I

This is Volume I of a two-volume work on the theory, of phase-locked receivers, with pertinent reference material on practical receiver design. Volume I is primarily devoted to the performance of carrier-tracking loops, including a rigorous treatment of narrow-band systems having IF limiters. The bulk of the work is based on a theoretical linear model, but a nonlinear method is also presented to predict behavior near the threshold. The emphasis throughout the work is toward completeness, simplicity, and internal consistency of the material assembled. Part I of this Volume is an exposition of the theory, the resulting equations, and the design philosophy that have enabled the phase-lock concept to evolve into the basic principle underlying the most sensitive receivers il, the world today. Part II is a condensed version of Part I, intended as a quick reference to formulas, definitions, and salient design considerations.

RECEIVER↗
NASA NTRS1993

Differential Scanning Calorimetry (DSC) for planetary surface exploration

Differential Scanning Calorimetry (DSC) is the quantitative measurement of the enthalpic response of a material to a systematic change in temperature. In practice, the heat flow into or outward from a sample is measured as the sample is heated or cooled at a carefully controlled rate. DSC superficially resembles, but is not the same as differential thermal analysis (DTA), which is the measurement of temperature differences between a sample and reference material as the pair is heated or cooled. The fundamental properties measured by DSC are enthalpies and temperatures of phase transitions and constant-pressure heat capacities. Depending on instrument design and the nature of the sample, high-quality DSC analyses can be obtained on only a few milligrams of solid materials. DSC requires direct contact with the sample and generally degrades, if not destroys, the sample as a consequence of heating. In laboratory applications, it is common to subject the gaseous effluent from the DSC to analysis by a separate evolved-gas analyzer (EGA).

Gooding, James L.↗