Search NASA⌕ Search

SEARCH · Search NASA

Results for “relevancy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Field‐Relevant Degradation Mechanisms in Metal Halide Perovskite Modules

Field testing, failure analysis, and understanding of degradation mechanisms are essential to advancing metal halide perovskite (MHP) photovoltaic (PV) technology toward commercialization. Here, we present performance data from up to 1 year of outdoor testing of MHP modules in Golden, Colorado. The module encapsulation architecture and encapsulant materials have a significant impact on module reliability, with modules containing a polyolefin elastomer (POE) in addition to a desiccated polyisobutylene (PIB) edge seal outlasting modules with only a PIB edge seal or PIB blanket. Nondestructive and destructive characterization of the field-tested modules points to module scribes and interfaces as areas of potential mechanical weakness and chemical migration, resulting in shunt pathways and increased series resistance. Finally, indoor accelerated stress testing with light and elevated temperatures is performed, demonstrating failure with similar scribe degradation signatures as compared to the field-tested modules. In conclusion, under both outdoor testing and light and elevated temperature conditions, electrochemical corrosion between the copper electrode and the mobile iodine ions appeared dominant, with a significant progression at the scribes that is speculated to result from an interplay between the initial laser damage and joule heating from enhanced ion diffusion under bias.

14 SOLAR ENERGY↗
DOE OSTI2026

Molecular basis and biological relevance of bacterial and plant pinoresinol/lariciresinol reductase specificities

A bacterial pinoresinol/lariciresinol reductase (PLR) homolog named NrPinZ was obtained from a Novosphingobium rhizosphaerae sp. LY bacterial strain, with NrPinZ being part of its 5-step biochemical system catabolizing pinoresinol into coniferyl aldehyde and vanillin. Recombinant NrPinZ reduces racemic 8–8′ furanofuran lignans [(±)-pinoresinols, medioresinols, and syringaresinols] with similar overall catalytic efficiencies. In those reductions, only one of the two furan ring systems is reduced. Two other bacterial PLR homologs, NaPinZ and SlPinZ, from N. aromaticivorans F199 and Sphingobium lignivorans SYK-6, respectively, had comparable substrate versatilities and catalytic efficacies. Plant PLR homologs, by comparison, are either enantiospecific, enantioselective, or variants thereof, being able to reduce either one or both furan rings. For example, a recombinant enantioselective PLR (PLR_Tp2) from western red cedar (Thuja plicata) preferentially reduces both (+)-pinoresinol furan rings to afford (−)-secoisolariciresinol. BoltZ-2 modeling of NrPinZ and PLR_Tp2, together with substrate docking of (+)- and (−)-pinoresinols, medioresinols, and syringaresinols, was very instructive. The NrPinZ active site P1/P2 sub-pockets allow for both racemic forms to be catabolized. Conversely, the smaller P1 pocket in PLR_Tp2 preferentially positions (+)-pinoresinol for downstream metabolism into (−)-secoisolariciresinol, thereby providing a biochemical explanation for the different stereochemical outcomes. NrPinZ, NaPinZ, and SlPinZ, catalyzing substrate versatile catabolism of both racemic forms, may have important ramifications for gymnosperm and angiosperm lignin and lignan biodegradation, including its evolutionary significance and potential in enzyme engineering.

Boltz-2 molecular modeling↗
DOE OSTI2025

Functional Relevance of CASP16 Nucleic Acid Predictions as Evaluated by Structure Providers

ABSTRACT Accurate biomolecular structure prediction enables the prediction of mutational effects, the speculation of function based on predicted structural homology, the analysis of ligand binding modes, experimental model building, and many other applications. Such algorithms to predict essential functional and structural features remain out of reach for biomolecular complexes containing nucleic acids. Here, we report a quantitative and qualitative evaluation of nucleic acid structures for the CASP16 blind prediction challenge by 12 of the experimental groups who provided nucleic acid targets. Blind predictions accurately model secondary structure and some aspects of tertiary structure, including reasonable global folds for some complex RNAs; however, predictions often lack accuracy in the regions of highest functional importance. All models have inaccuracies in non‐canonical regions where, for example, the nucleic‐acid backbone bends, deviating from an A‐form helix geometry, or a base forms a non‐standard hydrogen bond (not a Watson‐Crick base pair). These bends and non‐canonical interactions are integral to forming functionally important regions such as RNA enzymatic active sites. Additionally, the modeling of conserved and functional interfaces between nucleic acids and ligands, proteins, or other nucleic acids remains poor. For some targets, the experimental structures may not represent the only structure the biomolecular complex occupies in solution or in its functional life cycle, posing a future challenge for the community.

Biochemistry & Molecular Biology↗
DOE OSTI2024

In situ X-ray and IR probes relevant to Earth science at the Advanced Light Source at Lawrence Berkeley Laboratory

Access to synchrotron X-ray facilities has become an important aspect for many disciplines in experimental Earth science. This is especially important for studies that rely on probing samples in situ under natural conditions different from the ones found at the surface of the Earth. The non-ambient condition Earth science program at the Advanced Light Source (ALS), Lawrence Berkeley National Laboratory, offers a variety of tools utilizing the infra-red and hard X-ray spectrum that allow Earth scientists to probe Earth and environmental materials at variable conditions of pressure, stress, temperature, atmospheric composition, and humidity. These facilities are important tools for the user community in that they offer not only considerable capacity (non-ambient condition diffraction) but also complementary (IR spectroscopy, microtomography), and in some cases unique (Laue microdiffraction) instruments. The availability of the ALS’ in situ probes to the Earth science community grows especially critical during the ongoing dark time of the Advanced Photon Source in Chicago, which massively reduces available in situ synchrotron user time in North America.

58 GEOSCIENCES↗
DOE OSTI2024

Relevant biochar characteristics influencing compressive strength of biochar-cement mortars

To counteract the contribution of CO 2 emissions by cement production and utilization, biochar is being harnessed as a carbon-negative additive in concrete. Increasing the cement replacement and biochar dosage will increase the carbon offset, but there is large variability in methods being used and many researchers report strength decreases at cement replacements beyond 5%. This work presents a reliable method to replace 10% of the cement mass with a vast selection of biochars without decreasing ultimate compressive strength, and in many cases significantly improving it. By carefully quantifying the physical and chemical properties of each biochar used, machine learning algorithms were used to elucidate the three most influential biochar characteristics that control mortar strength: initial saturation percentage, oxygen-to-carbon ratio, and soluble silicon. These results provide additional research avenues for utilizing several potential biomass waste streams to increase the biochar dosage in cement mixes without decreasing mechanical properties.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Identification and overexpression of endogenous transcription factors to enhance lipid accumulation in the biotechnologically relevant species Chlamydomonas pacifica

Sustainable low-carbon energy solutions are critical to mitigating global carbon emissions. Algae-based platforms offer potential by converting carbon dioxide into valuable products while aiding carbon sequestration. However, scaling algae cultivation faces challenges like contamination in outdoor systems. Previously, our lab evolved Chlamydomonas pacifica, an extremophile green alga, which tolerates high temperature, pH, salinity, and light, making it ideal for large-scale bioproduct production, including biodiesel. Here, we enhanced lipid accumulation in evolved C. pacifica by identifying and overexpressing key endogenous transcription factors through genome-wide in-silico analysis and in-vivo testing. These factors include Lipid Remodeling Regulator 1 (CpaLRL1), Nitrogen Response Regulator 1 (CpaNRR1), Compromised Hydrolysis of Triacylglycerols 7 (CpaCHT7), and Phosphorus Starvation Response 1 (CpaPSR1). Under nitrogen deprivation, CpaLRL1, CpaNRR1, and CpaCHT7 overexpression enhanced lipid accumulation compared to wild-type. However, CpaPSR1 increased lipid accumulation compared to wild-type in normal media and did not increase further under nitrogen deprivation, highlighting the difference in function based on media conditions. Notably, lipid analysis of CpaPSR1 under normal media conditions revealed a 2.4-fold increase in triglycerides (TAGs) compared to the wild-type, highlighting its potential for biodiesel production. This approach provides a framework for transcription factor-focused metabolic engineering in algae, advancing bioenergy and biomaterial production.

Biofuels↗
DOE OSTI2025

Burn parameters affect PAH emissions at conditions relevant for prescribed fires

Wildfire smoke is a health hazard as it contains carcinogenic volatile compounds and fine particulate matter. In particular, exposure to polycyclic aromatic hydrocarbons (PAHs) is a major concern, since these compounds have been recognized as important contributors to the overall carcinogenic risk. In this work, gas and particle-phase PAH emissions from combustion of Eastern White Pine (Pinus strobus) were quantified using time-of-flight mass spectrometry over a range of burn conditions representative of wildfires and prescribed fires, including fuel moisture, heat flux, and oxygen concentration. We found that changing the burn environment lead to a variability of up to 77% in phenanthrene/anthracene emissions. This could explain a large part of the variability in PAH emission factors from biomass combustion reported in the literature. Here, we found that optimal conditions for fuel moisture content of 20–30%, sample heat load of 60 - 70 kW m -2 , and oxygen concentrations of 5–15% can significantly reduce the emissions of heavy molar weight PAHs. Our analysis showed that the relative carcinogenic risk from PAH exposure can be reduced by more than 50% under optimal conditions. In light of the increasing use of prescribed fire for forest management, the relationship between emissions and burn conditions that we have established provides a guidance for assessing the expected health impact from prescription burns, and can inform strategies to reduce PAH emissions from prescribed fire activities.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Flame kinetics at scramjet-engine-relevant conditions: Role of prompt dissociation of weakly-bound radicals

Combustion in high-speed ram-based propulsion engines occurs under distinct thermodynamic conditions of high reactant temperatures (greater than 1000 K) and relatively low pressures (<5 atm). There is a lack of fundamental flame measurements at such conditions that result in adiabatic flame temperatures (T ad ) exceeding 2500 K. In this work, we have measured laminar flame speeds of oxygen-enriched CH 4 /oxidizer mixtures at sub-atmospheric conditions to probe kinetics at high T ad using the isobaric spherically expanding flame approach. Simulations with recent kinetic models revealed increasing differences between data and model predictions with increasing T ad , reaching up to 25 %. Kinetic analyses reveal that at the thermodynamic conditions in these O 2 -enriched flames, i.e., lower pressures and higher T ad , the effects of HCO prompt dissociation are accentuated. In addition to HCO, the prompt dissociations of CH 2 OH and C 2 H 5 are also considered. Here, the prompt dissociations of all three radicals were evaluated and their effects considered in flame speed simulations. Reaction path analysis for the present flames revealed that approximately half of the reaction flux for HCO formation undergoes prompt dissociation to H + CO. Furthermore, these analyses also revealed that the pathways and sensitive reactions are similar between oxygen-enriched fuel/oxidizer mixtures and preheated fuel/air mixtures, if both have similar T ad . Thus, flames of oxygen-enriched mixtures could be a surrogate to probe the flame chemistry of highly preheated mixtures at relatively low pressures that are often encountered in ram-based propulsion engine combustors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Measuring thermal diffusivity and gap conductance in uranium nitride and Zircaloy relevant for microreactor applications

Heat transfer across nuclear fuels and structural interfaces is an important factor for evaluating the performance of nuclear power systems. Specifically, heat generated as nuclear fuel fissions must be transported through the cladding material and through the reactor to reach the steam turbine for power generation. As new microreactor designs emerge, maximizing the efficiency of this heat transfer process becomes crucial to make them commercially viable. This article examines thermal diffusivity and gap conductance in uranium nitride (UN) fuel and Zircaloy-4 (Zry4) cladding using light flash analysis (LFA). Thermal diffusivity measurements were made on monolithic UN pellets and Zry4 exposed to carbon at peak operating temperatures of microreactors and show that carbon ingress has a minimal effect on thermal diffusivity when compared with identical materials not exposed to carbon. Evaluation of gap conductance at the UN-Zry4 interface was done using one-dimensional two-layer thermal transport models as a function of applied pressure. Here the results show that increasing pressure on the UN-Zry4 interface leads to gains in gap conductance per unit area in fuel-cladding assemblies at microreactor operating temperatures. While many other variables are expected to influence UN-Zry4 interfacial gap conductance (e.g. contact surface roughness, porosity, localized heating, environmental gas pressure), the work offers a demonstration of using a conventional LFA apparatus to determine this parameter at elevated temperatures.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2026

Corrosion of 316 SS in direct contact with Zircaloy-4 in repository relevant conditions

The effects of interfacial contact between 316 stainless steel (316 SS) waste canister and spent fuel cladding material (Zircaloy-4) in case of water intrusion into a deep geological repository are investigated. Hydrothermal corrosion experiments of 316 SS and Zircaloy-4 in direct contact were performed at elevated temperatures in MilliQ water and simulated Mont Terri groundwater. Hematite, magnetite, chromite, and baddeleyite form as secondary phases. pH of the Mont Terri solution increases with corrosion duration and magnetite forms preferentially instead of hematite. Thermodynamic modeling shows that iron oxidation in 316 SS controls the pH and redox potential of the aqueous environment and is in good agreement with experimental Mont Terri results, showing that experimental Mont Terri results trend to equilibrium. All oxides except hematite are predicted to exist at thermodynamic equilibrium based on calculations, implying that experimentally formed hematite will be reduced or transformed to magnetite at equilibrium. The thermodynamically predicted chromite was observed to form only at the interface where 316 SS was in contact with Zircaloy-4 at 250°C, showing that contact with Zircaloy-4 seems to accelerate the 316 SS corrosion to thermodynamic equilibrium. Finally, Mont Terri groundwater readily trends towards thermodynamic equilibrium, leading to a pH and redox buffered system that is dominated by iron in solution coming from the accelerated corrosion of 316 SS caused by Zircaloy-4 contact.

316 stainless steel↗
DOE OSTI2025

Comparative transcriptomics of CAZy enzymes in white- and brown-rot agaricomycetes: Evolutionary insights into lignocellulose degradation and the relevance of GH16 glycoside hydrolase functional divergence

White-rot and brown-rot fungi (WRF and BRF, respectively) decompose lignocellulose, the main structural component of plant biomass, through distinct mechanisms. This study examines the transcriptomic responses of three WRF species (Pleurotus ostreatus, Phanerochaete chrysosporium, and Heterobasidion irregulare) and two BRF species (Fomitopsis schrenkii and Rhodonia placenta) grown on poplar wood (W) and glucose (G) as sole carbon sources. RNA-seq analysis revealed upregulation of carbohydrate-active enzymes (CAZymes) linked to lignocellulose degradation. WRF displayed a broader enzymatic repertoire, whereas BRF employed a more selective approach. Among these responses, GH16 glycoside hydrolases were consistently upregulated across all species, including BRF. Since GH16 enzymes are involved in both plant hemicellulose modification and cell wall remodeling, their wood-induced expression may reflect multiple processes rather than a single conserved wood-decay mechanism. Structural and phylogenetic analyses revealed species-specific divergence, consistent with potential functional specialization. These findings broaden our understanding of fungal enzymatic strategies and highlight GH16 enzymes as candidates for further study. Beyond the immediate context of wood decay, this work has broader implications for fungal ecology, evolutionary biology, and biotechnological applications such as biomass conversion and sustainable bioenergy.

Fungal ecological strategies↗
DOE OSTI2024

Understanding the ignition process and flame structure of conventional and oxygenated fuels under engine relevant conditions – An optical study

Renewably generated synthetic fuels such as poly-oxymethylene ethers (OME) have a significant potential to effectively break the soot-NOX trade-off in compression ignition engines by using exhaust gas recirculation (EGR) to maintain low nitrogen oxide (NOX) emissions while maintaining good efficiency and simultaneously contributing to circular carbon economy. However, owing to the fundamental differences in properties of OME when compared to fossil-based diesel fuels, it is critical to fully understand its ignition and combustion phenomenology to take advantage of this fuel to its utmost potential. In this context, this work outlines the results of a systematic experimental study performed in a heavy-duty, single-cylinder, optical engine probing the spatial and temporal progression of fuel decomposition and ignition behavior of OME when compared to n-dodecane, a diesel-fuel surrogate. Thermodynamic analysis and optical diagnostics techniques including simultaneous HCHO-PLIF and OH-PLIF complemented by high-speed OH* chemiluminescence were employed along with parametric sweeps of intake temperature and EGR dilution rates. OME does not exhibit any observable low temperature heat release irrespective of the ambient oxygen concentration. Differences in the observed diffusive flame structure such as longer flame lift-off length, less pronounced combustion recession, faster premixed burn at ignition (“volumetric” ignition), non-sooting behavior suggest that the inherent presence of fuel-bound oxygen in OME can skew the air-fuel ratio (AFR) distribution within the jet thereby reducing the reliance of combustion on mixing and air entrainment. This leads to rapid late-cycle oxidation leading to shorter combustion duration and favorable combustion phasing. Results also suggest that OME exhibits relatively weak negative temperature coefficient (NTC) behavior, however, the OME fuel-decomposition kinetic-pathways produce significant concentration of HCHO, which might be erroneously interpreted as a product of cool-flames.

Air-fuel ratio↗
DOE OSTI2026

Flame stabilization in DME spray flames under engine-relevant conditions characterized by OH* chemiluminescence and formaldehyde laser-induced fluorescence

The transient and quasi-steady flame structures of Dimethyl Ether (DME) fuel sprays, produced by a single-hole injector (Spray D), were investigated using Planar Laser-Induced Fluorescence (PLIF) and chemiluminescence imaging in a constant-volume chamber under Engine Combustion Network (ECN) Spray A conditions (900 K ambient temperature, 60 bar ambient pressure, 1500 bar injection pressure, and 22.8 kg/m 3 ambient density). Low-temperature chemical reaction zones were visualized using formaldehyde (CH 2 O) PLIF with 355 nm excitation, while high-temperature flame regions were captured via chemiluminescence imaging of excited-state hydroxyl radicals (OH*). Both transient and quasi-steady flame structures clearly show the transition from CH 2 O to OH*, highlighting the progression from low- to high-temperature combustion, while the position of the flame is displaced for DME compared to reference hydrocarbon n-dodecane. Homogeneous reactor calculations with detailed chemistry and using adiabatic mixing for initial temperature show that CH 2 O peaks are significantly higher for DME at the same equivalence ratio, with a higher heat-release during the cool-flame regime with respect to the fuel heating value. Thus, the cool-flame dynamic as a precursor to high-temperature combustion and flame stabilization exhibit distinct behavior for DME relative to conventional hydrocarbons, and these phenomena are effectively resolved through the soot-free nature of DME and the high-speed, time-resolved diagnostics.

CH2O laser-induced fluorescence↗
DOE OSTI2026

Trisodium Phosphate Phases and Solubility in Alkaline Solutions Relevant to Radioactive Waste Processing

The U.S. Department of Energy’s Hanford Site faces significant challenges in managing millions of gallons of legacy radioactive waste, where phosphate precipitation can obstruct pipelines during retrieval and processing. To resolve long-standing inconsistencies in reported solubility and clarify factors governing trisodium phosphate hydrates, we examined the Na3PO4:NaOH:H2O system. Powder and single-crystal X-ray diffraction revealed that commercial precursors undergo transformations that produce multiple hydrates, including three previously unreported phases comprising an ordered polymorph of Na3(PO4)·12H2O·1/6NaOH, Na3PO4·5H2O, and Na3PO4·9H2O. Computational modeling indicated that the ordered dodecahydrate is more stable than its disordered counterpart, suggesting kinetic persistence of structural disorder. Solubility measurements were conducted with solutions prepared either from anhydrous Na3PO4 or from Na3(PO4)·12H2O·1/6NaOH and revealed that release of interstitial NaOH from the hydrate precursor elevated solution alkalinity, thereby significantly reducing phosphate solubility relative to solutions prepared with anhydrous Na3PO4 across 20–44 °C. These results begin to reconcile inconsistencies in prior solubility data and clarify how phase composition dictates phosphate precipitation under alkaline conditions.

Graham, Trenton R. (ORCID:0000000189078004)↗
DOE OSTI2025

Ion-Exchange Membrane-Centric Durability Testing and Degradation Characterization for Industry-Relevant CO 2 Reduction

Electrochemical CO 2 reduction is a promising conversion process for producing value-added fuels and chemicals from electricity and CO 2 as a sustainable carbon feedstock to domestically produce fuels and chemicals from industrial waste. Having reached industrially viable performance metrics with small-scale CO 2 electrolysis cells, the field must now increasingly focus on extending the device durability of large stacks to achieve equivalent metrics for 35,000+ hours to decrease maintenance and capital costs. Reported device lifetimes have increased in recent years, with the longest stability studies for CO, ethylene, and formic acid production being published in 2024–2025 with operation times of 4500, 1000, and 5200 h, respectively. Unfortunately, significant extension of the device durability is still required. Here, we provide an overview of ion-exchange membranes (IEMs) and provide insight into the variety of degradation mechanisms that must be overcome to enable the community to meet durability targets. In an effort to accelerate the extension of device lifetimes, we propose a general approach for characterizing CO 2 electrolysis cell degradation before and after durability testing to better elucidate the mechanisms and failure modes of IEMs in zero-gap cells. Furthermore, we encourage the adoption of operando characterizations in tandem with accelerated stress and durability tests, postulating that their combined applications will be increasingly valuable. We hope that this perspective motivates future durability studies to evaluate degradation across the entire electrolysis cell.

09 BIOMASS FUELS↗
DOE OSTI2025

Comparing Classical and Machine Learning Force Fields for Modeling Deformation of Metal–Organic Frameworks Relevant for Direct Air Capture

Deformation of metal–organic frameworks (MOFs) induced by adsorbate molecules can affect adsorption properties such as capacity and selectivity, but most computational studies of MOFs assume framework rigidity to simplify calculations. Although flexible force fields (FFs) for MOFs have been parametrized for specific materials, the generality of FFs for reliably modeling adsorbate-induced deformation to accuracy nearing that of density functional theory (DFT) has not been established. This work confirms using DFT calculations that adsorbate-induced deformation can affect CO 2 and H 2 O adsorption energies in a considerable fraction of MOFs promising for direct air capture (DAC). We then benchmark the efficacy of several general-purpose FFs in describing adsorbate-induced deformation for DAC against DFT. Our results show that current classical FFs are insufficient for describing MOF deformation, especially in cases of interest for DAC where strong interactions exist between adsorbed molecules and MOF frameworks. Some emerging machine learning force fields (MLFFs) we tested, particularly CHGNet, MACE-MP-0, and Equiformer V2, appear to be more promising than the classical FF for emulating the deformation behavior described by DFT. The best performing FF (CHGNet), however, fails to achieve the accuracy required for practical predictions with a mean absolute adsorption energy error of 0.124 eV.

adsorption↗