Search NASA⌕ Search

SEARCH · Search NASA

Results for “reverse rates”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Small-Scale Gravity Waves in ER-2 MMS/MTP Wind and Temperature Measurements during CRYSTAL-FACE

Lower stratospheric wind and temperature measurements made from NASA's high-altitude ER-2 research aircraft during the CRYSTAL-FACE campaign in July 2002 were analyzed to retrieve information on small scale gravity waves (GWs) at the aircraft's flight level (typically approximately 20 km altitude). For a given flight segment, the S-transform (a Gaussian wavelet transform) was used to search for and identify small horizontal scale GW events, and to estimate their apparent horizontal wavelengths. The horizontal propagation directions of the events were determined using the Stokes parameter method combined with the cross S-transform analysis. The vertical temperature gradient was used to determine the vertical wavelengths of the events. GW momentum fluxes were calculated from the cross S-transform. Other wave parameters such as intrinsic frequencies were calculated using the GW dispersion relation. More than 100GW events were identified. They were generally high frequency waves with vertical wavelength of approximately 5 km and horizontal wavelength generally shorter than 20 km. Their intrinsic propagation directions were predominantly toward the east, whereas their ground-based propagation directions were primarily toward the west. Among the events, approximately 20% of them had very short horizontal wavelength, very high intrinsic frequency, and relatively small momentum fluxes, and thus they were likely trapped in the lower stratosphere. Using the estimated GW parameters and the background winds and stabilities from the NCAR/NCEP reanalysis data, we were able to trace the sources of the events using a simple reverse ray-tracing. More than 70% of the events were traced back to convective sources in the troposphere, and the sources were generally located upstream of the locations of the events observed at the aircraft level. Finally, a probability density function of the reversible cooling rate due to GWs was obtained in this study, which may be useful for cirrus cloud models.

Wang, L.↗
NASA NTRS2018

Hybrid Reduced Order Model for N2-N2 Interactions for Application to Dissociation and Energy Transfer Processes

Recent work in the aerothermodynamics community has focused on the development of reduced-order models for thermo-chemical non-equilibrium which avoid the restrictive assumptions of multi-temperature models and the prohibitive cost associated with State-to-State (StS) models. In the present work, this is accomplished by lumping energy states together and assuming groups of states are roughly in equilibrium. As a result, the non-equilibrium behavior of a gas can be captured at a reduced computational cost from a full StS simulation. In this work, we present a hybrid grouping model for studying energy transfer and dissociation in a mixture of nitrogen molecules due to N2-N2 reactions. This is accomplished by making use of a grouping strategy informed by data from the N2-N StS kinetic data. However, due to the massive computational cost associated with constructing StS data for the N2-N2 system, the kinetic data for the hybrid grouping model are calculated using the quasi-classical trajectory (QCT) method by sampling states for trajectory within the groups. This general framework is called the Maximum-Entropy Quasi-Classical Trajectory (ME-QCT) method. The primary challenge associated with this method is that rates for reverse grouped reactions cannot be obtained through detailed balance at a group level, due to the variation of group internal temperatures. To construct the full model for N2-N2 grouped kinetics using the ME-QCT method, detailed balance is invoked at the microscopic level, allowing for the calculation of the full kinetic data from QCT. Results will be presented using the full ME-QCT model for the N2-N2 system in an isothermal and isochoric reactor simulation. In addition, simple CFD test cases for a one-dimensional standing shock and for a quasi-one-dimensional nozzle will be used for demonstration of the ME-QCT method. This method allows for the calculation of non-equilibrium behavior for the N2-N2 system without the prohibitive cost of a full StS simulation. Moreover, it enables the construction of a unified model for the dissociating and recombining non-equilibrium flows.

nonequilibrium modeling↗
NASA NTRS1975

Unsteady turbulent boundary layers with flow reversal

A theoretical study is carried out to search for the appearance of a singularity in a family of time-dependent turbulent boundary layers with embedded reverse-flow regions and determine the conditions necessary for its appearance. Further insight is gained into the development of unsteady turbulent boundary layers. The calculations performed for a family of prescribed external velocity distributions in which the relative importance of the effects of time-dependence, compared to those of spatial diffusion, are controlled by a given parameter. The conditions necessary for the appearance of a singularity appears to involve the existence of an appropriate relationship between the dominant velocities in the reversed-flow region and the rate of forward movement of the flow reversal point. The results support the hypothesis that a singularity will exist in the flow if and only if the typical reversed-flow velocities exceed the rate of penetration of the reversed flow into the oncoming boundary layer.

Patel, V. C.↗
DOE OSTI2025

Asymmetric ether solvents for high-rate lithium metal batteries

Recent electrolyte solvent design based on weakening lithium-ion solvation have shown promise in enhancing cycling performance of Li-metal batteries. However, they often face slow redox kinetics and poor cycling reversibility at high rate. Here we report using asymmetric solvent molecules substantially accelerates Li redox kinetics. Asymmetric ethers (1-ethoxy-2-methoxyethane, 1-methoxy-2-propoxyethane) showed higher exchange current densities and enhanced high-rate Li 0 plating/stripping reversibility compared to symmetric ethers. Adjusting fluorination levels further improved oxidative stability and Li 0 reversibility. The asymmetric 1-(2,2,2-trifluoro)-ethoxy-2-methoxyethane, with 2 M lithium bis(fluorosulfonyl)imide, exhibited high exchange current density, oxidative stability, compact solid–electrolyte interphase (~10 nm). This electrolyte exhibited superior performance among state-of-the-art electrolytes, enabling over 220 cycles in high-rate Li (50 μm)||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811, 4.9 mAh cm −2 ) cells and for the first time over 600 cycles in anode-free Cu | |Ni95 pouch cells (200 mAh) under electric vertical take-off and landing cycling protocols. Our findings on asymmetric molecular design strategy points to a new pathway towards achieving fast redox kinetics for high-power Li-metal batteries.

batteries↗
NASA NTRS1980

Electrical, thermal and abusive tests on lithium thionyl chloride cells

Electrical characterizations, thermal characterizations, and outer limits tests of lithium thionyl chloride cells are discussed. Graphs of energy density vs power density and heat rate vs time are presented along with results of forced reversal and high rate discharge tests.

Frank, H. A.↗
DOE OSTI2025

Thermodynamic consistency and fluctuations in mesoscopic stochastic simulations of reactive gas mixtures

It is essential that mesoscopic simulations of reactive systems reproduce the correct statistical distributions at thermodynamic equilibrium. By considering a compressible fluctuating hydrodynamics (FHD) simulation method of ideal gas mixtures undergoing reversible reactions described by the chemical Langevin equations, we show that thermodynamic consistency in reaction rates and the use of instantaneous temperatures for the evaluation of reaction rates is required for fluctuations for the overall system to be correct. We then formulate the required properties of a thermodynamically consistent reaction (TCR) model. As noted in the literature, while reactions are often discussed in terms of forward and reverse rates, these rates should not be modeled independently because they must be compatible with thermodynamic equilibrium for the system. Using a simple TCR model where each chemical species has constant heat capacity, we derive the explicit condition that the forward and reverse reaction rate constants must satisfy in order for the system to be thermodynamically consistent. We perform equilibrium and non-equilibrium simulations of ideal gas mixtures undergoing a reversible dimerization reaction to measure the fluctuational behavior of the system numerically. We confirm that FHD simulations with the TCR model give the correct static structure factor of equilibrium fluctuations. For the statistically steady simulation of a gas mixture between two isothermal walls with different temperatures, we show using the TCR model that the temperature variance agrees with the corresponding thermodynamic-equilibrium temperature variance in the interior of the system, whereas noticeable deviations are present in regions near walls, where chemistry is far from equilibrium.

Polimeno, Matteo [University of California, Merced↗
DOE OSTI2025

Low Temperature CO 2 Hydrogenation on Unsupported Mo 2 C Catalysts

CO 2 hydrogenation to methanol, a key reaction for decarbonizing the fuel and chemical industries, requires catalyst formulations that hydrogenate CO 2 selectively to methanol at temperatures where methanol conversion is not significantly equilibrium limited (<423 K). Herein we report continuous CO 2 hydrogenation at low temperatures (348-408 K, H 2 /CO 2 = 0.1-50, 5-35 bar) with high selectivity to methanol (up to ca. 80%) over unsupported β-Mo 2 C catalysts. Active site density quantification via titration with trifluoroacetic acid at reaction temperatures enables an assessment of site-specific rates. Methanation and reverse water gas shift (RWGS) occur concurrently with methanol synthesis during CO 2 hydrogenation over Mo 2 C. Reaction pathway analysis, product cofeeds, and reversibility formalisms show that all products form through primary reaction pathways from CO 2 , but secondary reactions of CO contribute significantly to rates of methanation. Dependences of forward rates on reactant and product concentration determined by independently varying the CO 2 , H 2 , CO, H 2 O, CH 3 OH, and CH 4 pressure in conjunction with reversibility formalisms reveal that all products form through H-assisted CO 2 activation and involve partially hydrogenated CO 2 -derived intermediates. Here, these inferences were verified by quantitative agreement between measured site-time yields and site-time yields predicted by closed form kinetic rate expressions in an integral reactor model over widely varying conditions (85-2000 kPa H 2 , 80-1500 kPa CO 2 , 0-45 kPa H 2 O, 0-21 kPa CO, 0-25 kPa CH 3 OH, 0-75 kPa CH 4 , 5-87 mol Mo s s mol CO 2 -1 ). Coverages calculated based on the kinetic model reveal that the Mo 2 C surface is covered with bidentate CO- and CO 2 -derived intermediates of the stoichiometry H 2 CO 2 and H 2 CO, indicating that H 2 and CO x do not compete for surface occupancy but instead adsorb cooperatively to form partially hydrogenated intermediates. Hydrogenation of the CO-derived H 2 CO** intermediate favors methanation, while hydrogenation of CO 2 -derived H 2 CO 2 ** favors methanol synthesis. Together, these findings demonstrate the ability of unsupported Mo 2 C to catalyze the hydrogenation of CO 2 to methanol at low temperatures and provide insight into the reaction network and mechanisms involved in its formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Labile assembly of a tardigrade protein induces biostasis

Abstract Tardigrades are microscopic animals that survive desiccation by inducing biostasis. To survive drying tardigrades rely on intrinsically disordered CAHS proteins, which also function to prevent perturbations induced by drying in vitro and in heterologous systems. CAHS proteins have been shown to form gels both in vitro and in vivo, which has been speculated to be linked to their protective capacity. However, the sequence features and mechanisms underlying gel formation and the necessity of gelation for protection have not been demonstrated. Here we report a mechanism of fibrillization and gelation for CAHS D similar to that of intermediate filament assembly. We show that in vitro, gelation restricts molecular motion, immobilizing and protecting labile material from the harmful effects of drying. In vivo, we observe that CAHS D forms fibrillar networks during osmotic stress. Fibrillar networking of CAHS D improves survival of osmotically shocked cells. We observe two emergent properties associated with fibrillization; (i) prevention of cell volume change and (ii) reduction of metabolic activity during osmotic shock. We find that there is no significant correlation between maintenance of cell volume and survival, while there is a significant correlation between reduced metabolism and survival. Importantly, CAHS D's fibrillar network formation is reversible and metabolic rates return to control levels after CAHS fibers are resolved. This work provides insights into how tardigrades induce reversible biostasis through the self‐assembly of labile CAHS gels.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1988

Low temperature safety of lithium-thionyl chloride cells

The use of lithium thionyl chloride cells for low-temperature applications is presently restricted because of their unsafe behavior. An attempt is made in the present investigation to identify the safe/unsafe low temperature operating conditions and to understand the low temperature cell chemistry responsible for the unsafe behavior. Cells subjected to extended reversal at low rate and -40 C were found to explode upon warm-up. Lithium was found to deposit on the carbon cathodes during reversal. Warming up to room temperature may be accelerating the lithium corrosion in the electrolyte. This may be one of the reasons for the cell thermal runaway.

Subbarao, S.↗
DOE OSTI2020

In Operando Calorimetric Measurements for Activated Carbon Electrodes in Ionic Liquid Electrolytes under Large Potential Windows

This study aims to investigate the effect of the potential window on heat generation in carbon-based electrical double layer capacitors (EDLCs) with ionic-liquid (IL)-based electrolytes using in operando calorimetry. The EDLCs consisted of two identical activated-carbon electrodes with either neat 1-butyl-1-methylpyrrolidinium bis(trifluoromethane-sulfonyl)imide ([Pyr 14 ][TFSI]) electrolyte or 1.0 m [Pyr 14 ][TFSI] in propylene carbonate (PC) as electrolyte. The instantaneous heat generation rate at each electrode was measured under galvanostatic cycling for different potential windows ranging from 1 to 4 V. First, the heat generation rates at the positive and negative electrodes differed significantly in neat IL owing to the differences in the ion sizes and diffusion coefficients. However, these differences were minimized when the IL was diluted in PC. Second, for EDLC in neat [Pyr 14 ][TFSI] at high potential window (4 V), a pronounced endothermic peak was observed at the beginning of the charging step at the positive electrode owing to TFSI - intercalation in the activated carbon. On the other hand, for EDLC in 1.0 m [Pyr 14 ][TFSI] in PC at potential window above 3 V, an endothermic peak was observed only at the negative electrode owing to the decomposition of PC. Third, for both neat and diluted [Pyr 14 ][TFSI] electrolytes, the irreversible heat generation rate increased with increasing potential window and exceeded Joule heating. This was attributed to the effect of potential-dependent charge redistribution resistance. Additionally, a further increase in the irreversible heat generation rate was observed for the largest potential windows owing to the degradation of the PC solvent. Finally, for both types of electrolyte, the reversible heat generation rate increased with increasing potential window because of the increase in the amount of ion adsorbed/desorbed at the electrode/electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Potentiometric entropy and operando calorimetric measurements reveal fast charging mechanisms in PNb 9 O 25

The Wadsley–Roth compound PNb 9 O 25 is a promising fast charging lithium ion battery anode material with high operating voltage to prevent solid electrolyte interface formation. Here, in this work, we present potentiometric entropy measurements featuring signatures of semiconductor-to-metal transition and intralayer ordering upon lithiation in the anode material PNb 9 O 25 that could not be observed with in situ X-ray diffraction. In addition, the instantaneous heat generation rates at the PNb 9 O 25 working electrode and at the lithium metal counter electrode during galvanostatic cycling were measured individually for the first time by operando isothermal calorimetry. The heat generation rate decreased at the PNb 9 O 25 electrode upon lithiation due to the decrease in electrical resistivity caused by the semiconductor-to-metal transition observed in potentiometric entropy measurements. Furthermore, the heat generation rate at the lithium metal electrode was positive during delithiation due to the exothermic plating of Li + ions on the lithium metal counter electrode associated with dendrite formation. Furthermore, calorimetric measurements established that the entropy change dominated the reversible heat generation rate at each electrode. Finally, the contribution of enthalpy of mixing was relatively small even at high C-rates thanks to the high Li + ion mobility in PNb 9 O 25 confirming its promises as a fast charging anode material.

25 ENERGY STORAGE↗
DOE OSTI2020

Microkinetic Modeling: A Tool for Rational Catalyst Design

The design of heterogeneous catalysts relies on understanding the fundamental surface kinetics that controls catalyst performance, and microkinetic modeling is a tool that can help the researcher in streamlining the process of catalyst design. Microkinetic modeling is used to identify critical reaction intermediates and rate-determining elementary reactions, thereby providing vital information for designing an improved catalyst. In this review, we summarize general procedures for developing microkinetic models using reaction kinetics parameters obtained from experimental data, theoretical correlations, and quantum chemical calculations. We examine the methods required to ensure the thermodynamic consistency of the microkinetic model. We describe procedures required for parameter adjustments to account for the heterogeneity of the catalyst and the inherent errors in parameter estimation. We discuss the analysis of microkinetic models to determine the rate determining reactions using the degree of rate control and reversibility of each elementary reaction. We introduce incorporation of Brønsted–Evans–Polanyi relations and scaling relations in microkinetic models and the effects of these relations on catalytic performance and formation of volcano curves. We review the analysis of reaction schemes in terms of the maximum rate of elementary reactions, and we outline a procedure to identify kinetically significant transition states and adsorbed intermediates. Here, we explore the application of generalized rate expressions for the prediction of optimal binding energies of important surface intermediates and to estimate the extent of potential rate improvement. We also explore the application of microkinetic modeling in homogeneous catalysis, electro-catalysis, and transient reaction kinetics. We conclude by highlighting the challenges and opportunities in the application of microkinetic modeling for catalyst design.

42 ENGINEERING↗
DOE OSTI2024

Understanding particle size effect on fast-charging behavior of graphite anode using ultra-thin-layer electrodes

Extreme fast charging (≤ 15 min) of lithium-ion batteries is highly desirable to accelerate mass-market adoption of electric vehicles. However, significant capacity fading, as well as safety issues due to the lithium plating caused by the fast charging rate, limit its implementation. In this study, we investigated the fast-charging capability of graphite materials with various particle sizes. To eliminate the Li + ion concentration gradient effect across the thickness of the electrode, ultra-thin-layer graphite electrodes were developed to investigate the "real" fast-charging capability of graphite at the particle level. Electrochemical assessments as well as microscopic characterizations revealed that smaller particles exhibited superior fast-charging performance, featuring enhanced capacity reversibility, faster charging rate, and less lithium plating under the same fast-charging conditions. It is shown that small-particle graphite (mean radius of 3.3 μm) could withstand a 4C charge (to 80 % state-of-charge) without plating, with minimal plating occurring at 6C. Thicker particles exhibited plating at lower C-rates. Since the experimental data could not directly explain whether intra-particle diffusion limitations or interfacial reaction limitations dominated the plating mechanism, the pseudo-2-dimensional model was used to evaluate the most likely plating mechanism. The model suggested that particle-level diffusion is the dominant mechanism contributing to plating at high rates. Finally, this work provides comprehensive insights into the particle size effects on fast-charging capability, offering a better understanding of fast-charging behavior and valuable guidance for designing optimal electrode architecture for high-rate lithium-ion batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Valorizing the carbon byproduct of methane pyrolysis in batteries

While low-cost natural gas remains abundant, the energy content of this fuel can be utilized without greenhouse gas emissions through the production of molecular hydrogen and solid carbon via methane pyrolysis. In the absence of a carbon tax, methane pyrolysis is not economically competitive with current hydrogen production methods unless the carbon byproducts can be valorized. In this work, we assess the viability of the carbon byproduct produced from methane pyrolysis in molten salts as high-value-added anode or conductive additive for secondary Li-ion and Na-ion batteries. Raman characterization and electrochemical differential capacity analysis demonstrate that the use of molten salt mixtures with catalytically-active FeCl 3 - or MnCl 2 result in more graphitic carbon co-products. These graphitic carbons exhibit the best electrochemical performance (up to 272 mAh/g of reversible capacity) when used as Li-ion anodes. For all carbon samples studied here, disordered carbon domains and retained salt species trapped and/or intercalated into the carbon structure were identified by X-ray photoelectron and multinuclear solid-state nuclear magnetic resonance spectroscopy. The latter lead to reduced electrochemical activity and reversibility, and poorer rate performance compared to commercial carbon anodes. The electronic conductivity of the pyrolyzed carbons is found to be highly dependent on their purity, with the purest carbon exhibiting an electronic conductivity nearly on par with that of commercial carbon additives. These findings suggest that more effective removal of the salt catalyst could enable applications of these carbons in secondary batteries, providing a financial incentive for the large-scale implementation of methane pyrolysis for “low-carbon” hydrogen production.

08 HYDROGEN↗
DOE OSTI2021

Nickel B-site substitution in bulk Sr 1-x Ca x FeO 3 perovskite oxygen carriers: Benefits and limitations

We report oxygen (O 2 ) storage materials often rely on the presence of cobalt (Co) to reduce the thermodynamic penalty and increase the kinetics necessary for efficient O 2 storage and release. In this work, we investigate nickel (Ni) as an alternative B-site dopant in Sr 1-x Ca x FeO 3 to identify Co-free carriers that still show improved kinetics at low temperatures. In fact, we show a substantial increase in the reversible O2 release rate through mild Ni B-site substitution (y = 0.06) in select Sr 1-x Ca x Fe 1-y Ni y O 3 systems at 400 to 500 °C, reaching 2.00 wt.% O 2 release up to approximately 75% faster than Ni-free systems. To explain the role of Ni in these systems, we use density functional theory to calculate the O 2 vacancy (V O ) formation energy from separate metal-oxygen (M-O) bonding and relaxation components. We computationally show elongated Ni-O bonds are directly responsible for the decrease in V O upon Ni substitution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Enthalpy-uphill exciton dissociation in organic/2D heterostructures promotes free carrier generation

Despite the large binding energy of charge transfer (CT) excitons in type-II organic/2D heterostructures, it has been demonstrated that free carriers can be generated from CT excitons with a long lifetime. Using a model fluorinated zine phthalocyanine (F 8 ZnPc)/monolayer-WS 2 interface, we find that CT excitons can dissociate spontaneously into free carriers despite it being an enthalpy-uphill process. Specifically, it is observed that CT excitons can gain an energy of 250 meV in 50 ps and dissociate into free carriers without any applied electric field. This observation is surprising because excited electrons typically lose energy to the environment and relax to lower energy states. Here, we hypothesize that this abnormal enthalpy-uphill CT exciton dissociation process is driven by entropy gain. Kinetically, the entropic driving force can also reduce the rate for the reverse process – the conversion of free electron–hole pairs back to CT excitons. Hence, this mechanism can potentially explain the very long carrier lifetime observed in organic/2D heterostructures.

36 MATERIALS SCIENCE↗
NASA NTRS1972

High-temperature, long-life thyratron

Thallium and xenon filled thyratron was developed that operates at tube envelope temperatures up to 750 C. This tube performs at peak voltage ratings of 2000 V forward and reverse and at an average current rating of 15 A for up to 11,000 hours.

Baum, E. A.↗