Search NASA⌕ Search

SEARCH · Search NASA

Results for “segregation energies”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Distribution of 7 Li implants in Nb films for a sterile neutrino search

The Beryllium-7 Electron capture in Superconducting Tunnel junctions (BeEST) experiment searches for sub-MeV sterile neutrinos by measuring the 7 Li recoil spectrum from 7 Be decay in Ta-based superconducting quantum sensors. Its sensitivity is limited by spectral broadening from interactions between 7 Be/ 7 Li and the Ta host material. This study investigates Nb as an alternative sensor material using scanning transmission electron microscopy (STEM) and atom probe tomography (APT) on 7 Li-implanted Nb films (∼0.5 at. %). STEM shows no 7 Li cluster formation and no implantation-induced microstructural degradation, while APT reveals some limited 7 Li segregation to grain boundaries. Although this segregation may slightly influence binding energies, it is unlikely to affect the broadening of the recoil spectrum significantly. These findings support Nb as a viable sensor material for future phases of the BeEST experiment.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Thermal effects in equilibrium surface segregation in a copper/10-atomic-percent-aluminum alloy using Auger electron spectroscopy

Equilibrium surface segregation of aluminum in a copper-10-atomic-percent-aluminum single crystal alloy oriented in the /111/ direction was demonstrated by using Auger electron spectroscopy. This crystal was in the solid solution range of composition. Equilibrium surface segregation was verified by observing that the aluminum surface concentration varied reversibly with temperature in the range 550 to 850 K. These results were curve fitted to an expression for equilibrium grain boundary segregation and gave a retrieval energy of 5780 J/mole (1380 cal/mole) and a maximum frozen-in surface coverage three times the bulk layer concentration. Analyses concerning the relative merits of sputtering calibration and the effects of evaporation are also included.

Ferrante, J.↗
NASA NTRS1990

Long-wave morphological instabilities in the directional solidification of a dilute binary mixture

Long-wave instabilities in a directionally-solidified binary mixture may occur in several limits. Sivashinsky (1983) identified a small-segregation-coefficient limit and obtained a weakly nonlinear evolution equation governing subcritical two-dimensional bifurcation. Brattkus and Davis (1988) identified a near-absolute-stability limit and obtained a strongly nonlinear evolution equation governing supercritical two-dimensional bifurcation. The present investigation identifies a third strongly nonlinear evolution equation, arising in the small-segregation-coefficient, large-surface-energy limit. This equation links both of the former and describes the change from the sub- to super-critical bifurcations. This study sets the previous long-wave analyses into a logical framework.

Riley, D. S.↗
DOE OSTI2023

Understanding grain boundary segregation under irradiation: A mesoscale modeling study

Grain boundaries (GBs) are an important component in the design of irradiation resistant materials as they play a crucial role as point defect sinks for non-equilibrium vacancies and self-interstitials. However, in the presence of sustained point defect fluxes, the coupled transport of atomic components with inherently different diffusivities often leads to radiation-induced segregation (RIS), with undesired effects on properties such as intergranular corrosion and stress-assisted cracking. In this talk, we investigate the fundamental mechanisms leading to GB segregation in BCC FeCr-based alloys using multiscale modeling and experiments. A phase-field model is employed to account for both thermodynamic and kinetic segregation mechanisms. The full Onsager transport matrix is derived using kinetic Monte Carlo, molecular dynamics, and kinetic cluster expansion (KineCluE) calculations. The thermodynamics of GB segregation is described via an atomic density-based modification to the CALPHAD free energy. The modeling predictions are then compared against segregation data from atom probe characterization for various temperatures, compositions, and neutron irradiation conditions. We will conclude by discussing the utility of the multiscale modeling approach to shed light on the fundamental mechanisms leading to solute-GB interaction.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Correlative STEM-APT characterization of radiation-induced segregation and precipitation of in-service BWR 304 stainless steel

In this study, radiation induced segregation and precipitation phenomena in an in-service boiling water reactor 304 stainless steel component were investigated using directly correlated 3D-atom probe tomography and scanning transmission electron microscopy. Significant quantitative differences in measured segregation at grain boundaries were found between the atom probe and energy dispersive spectroscopy measurements of the exact same locations. In particular, a much stronger Si segregation (~10 atomic% via atom probe versus ~4 atomic% via electron microscopy) and different Cr profile shapes were detected that are critical to models of radiation induced segregation and stress corrosion cracking behavior. These quantitative differences highlight the need for comparative microscopy and critical evaluation of limitations in each analytical method. Elemental segregation to dislocations and conjoined-clusters were also highlighted by atom probe; confirming and expanding upon what has been observed in test reactor neutron and accelerator-based ion irradiations.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Facet-Dependent Ni Segregation in a Micron-Sized Single-Crystal Li 1.2 Ni 0.2 Mn 0.6 O 2 Cathode

Elemental surface segregation in cathode materials is critical for determining the phase and interfacial reaction between electrode and electrolyte, which consequently affects the electrochemical properties. Single-crystal cathode of Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 with an octahedral morphology of (102) and (003) dominated facets have been manifested to show enhanced electrochemical properties. However, the surface structural features of such single crystals have not been investigated. Herein, using scanning transmission electron microscopy, energy dispersive X-ray spectroscopy, and electron energy loss spectroscopy, we probe the elemental surface segregation characteristics in these single-crystal cathode. We reveal that Ni surface segregation shows dependence on the crystal facet such that it occurs on crystal facets with a mix of cations and anions, but not on the facets with only cations or anions. Furthermore, facet-dependent surface reconstructions are observed, featuring a spinel-like structure at the Ni-rich facet but rock-salt structure at the facet without Ni segregation. The commonly known Mn reduction appears at the single crystal surfaces, more pronounced at the facet without Ni segregation. We further reveal that fluorination leads to the stabilization of surface oxygens. In conclusion, this study provides detailed structural and chemical information about the facet-dependent Ni surface segregation and the resulted phase formation in the rather less explored micron-sized octahedral Li 1.2 Ni 0.2 Mn 0.6 O 2 and Li 1.2 Ni 0.2 Mn 0.6 O 1.95 F 0.05 single crystals, which is key to further exploration of electrochemical properties of cathode in the form of micro-sized single crystal.

25 ENERGY STORAGE↗
DOE OSTI2025

Selective Oxidation and Cr Segregation in High-Entropy Oxide Thin Films

High-entropy oxides (HEOs) offer exceptional compositional flexibility and structural stability, making them promising materials for energy and catalytic applications. Here, in this study, we investigate Sr doping effects on B-site cation oxidation states, local composition, and structure in epitaxial La 1–x Sr x (Cr 0.2 Mn 0.2 Fe 0.2 Co 0.2 Ni 0.2 )O 3 thin films. X-ray spectroscopies reveal that Sr doping preferentially promotes Cr oxidation from Cr 3+ to Cr 6+ , partially oxidizes Co and Ni, while leaving Mn 4+ and Fe 3+ unchanged. Atomic-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy shows pronounced Cr segregation, with depletion at the interface and enrichment at the surface, along with partial amorphization in heavily Sr-doped samples. This segregation is likely driven by oxidation-induced migration of smaller, high-valence Cr cations during growth. These findings highlight the critical interplay between charge compensation, local strain, and compositional fluctuations in HEOs, indicating that precise control over growth conditions is critical for tuning their surface composition and electronic structure toward more robust electrocatalyst design.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Oxidation mechanism in a refractory multiple-principal-element alloy at high temperature

Refractory multiple-principal-element alloys (RMPEAs) are promising structural materials to enable increased power efficiency in high-temperature oxidation environments, but the oxidation behavior and microstructures of the oxides, especially at the beginning of the oxidation, have received limited attention. Here, the oxidation mechanism in an equimolar W-Mo-Ta-Nb-V was investigated at 1300 °C and compared with the equimolar W-Mo-Ta-Nb alloy without V. The oxide scale on WMoTaNbV after 1 min exposure is shown to be composed of a degradation layer at the interface of the alloy/oxide, an initial oxide transition layer, followed by the main phase aggregate oxide layer, and an outermost oxide layer. At the early stage of oxidation, the absorption of oxygen by the RMPEA substrate forms a solid solution. Vanadium accelerates the initial degradation process as it forms VO. The initial oxidation-induced degradation of RMPEA follows a sequence governed by the free energy change accompanied by local element segregation. Liquid V-Mo oxides aggregate in the intermediate oxide layer. The inward growth of the oxide scale is controlled by the local composition changes, the orientation of the substrate, the crystal structure, and physical properties such as melting points of the oxides.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Suppressed phase segregation for triple-junction perovskite solar cells

The tunable band gaps and facile fabrication of perovskites make them attractive for multi-junction photovoltaics. However, light-induced phase segregation limits their efficiency and stability: this occurs in wide band gap (> 1.65 eV) I/Br mixed perovskite absorbers, and becomes even more acute in the top cells of triple-junction solar photovoltaics that requires a fully 2.0 eV band gap absorber. We report herein that lattice distortion in I/Br mixed perovskites is correlated with the suppression of phase segregation, generating an increased ion migration energy barrier arising from the decreased average interatomic distance between A-site cation and iodide. Using a ~2.0 eV Rb/Cs mixed-cation inorganic perovskite with large lattice distortion in the top subcell, we fabricated all-perovskite triple-junction solar cells and achieved an efficiency of 24.3% (23.3% certified quasi-steady-state efficiency) with an open-circuit voltage of 3.21 V. This is, to our knowledge, the first reported certified efficiency for perovskite-based triple-junction solar cells. The triple-junction devices retain 80% of their initial efficiency following 420 hours of operation at the maximum power point.

14 SOLAR ENERGY↗
DOE OSTI2023

Origins of Photoluminescence Instabilities at Halide Perovskite/Organic Hole Transport Layer Interfaces

Metal halide perovskites are promising for optoelectronic device applications; however, their poor stability under solar illumination remains a primary concern. While the intrinsic photostability of isolated neat perovskite samples has been widely discussed, it is important to explore how charge transport layers—employed in most devices—impact photostability. Here, in this paper, we study the effect of organic hole transport layers (HTLs) on light-induced halide segregation and photoluminescence (PL) quenching at perovskite/organic HTL interfaces. By employing a series of organic HTLs, we demonstrate that the HTL’s highest occupied molecular orbital energy dictates behavior; furthermore, we reveal the key role of halogen loss from the perovskite and subsequent permeation into organic HTLs, where it acts as a PL quencher at the interface and introduces additional mass transport pathways to facilitate halide phase separation. In doing so, we both reveal the microscopic mechanism of non-radiative recombination at perovskite/organic HTL interfaces and detail the chemical rationale for closely matching the perovskite/organic HTL energetics to maximize solar cell efficiency and stability.

14 SOLAR ENERGY↗
NASA NTRS1989

Correlations and alloy properties - Growth, vacancies, surface segregation

The aspects of bonding interaction mechanisms which have an impact on the correlation state of alloy semiconductors are demonstrated. The effect of the correlation state on liquidus and solidus curves, on surface segregation, and on vacancy densities is deduced. Vacancy energies for several alloys are presented, and tentative conclusions are drawn about their effects on diffusion, doping, and ion beam processing. Features of the theory of surface segregation in semiconductor alloys are then presented.

Sher, A.↗
DOE OSTI2024

The many faces of θ' -Al 2 Cu precipitates: Energetics of pristine and solute segregated Al/ θ' semi-coherent interfaces

θ'-Al 2 Cu precipitates in Al-Cu alloys have various distorted octagon shapes, which can be explained by the competition between {100} and {110} type semi-coherent interfaces with the Al matrix. While most prior studies on the semi-coherent Al/θ' interfaces have focused on the {100} orientation, little is known about the {110} interface. We have investigated the energetics of pristine and solute-segregated {110} semi-coherent Al/θ' interfaces with advanced characterization and first-principles studies. We report interfacial, strain, and solute segregation energetics of the {110} Al/θ' semi-coherent interface for 39 elements and compared them with previously reported values of the {100} interface. We discuss the atomic features and atomic local structures to identify similarities and differences between the two types of Al/θ' semi-coherent interfaces. Here, the isotropy in pristine Al/θ' semi-coherent interfacial energy and the anisotropy resulting from solute segregation provide insight into the formation of different types of θ' precipitate “faces” reported in the literature.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Thermodynamics of grain-boundary phases

The past decade has seen a significant increase in research efforts aimed at understanding the thermodynamics of low-dimensional phases existing in many materials systems, ranging from two-dimensional materials to core regions of extended defects in crystalline solids. We review the current status of theoretical, computational, and experimental research on the “defect phases,” focusing on grain boundaries (GBs) in elemental and multicomponent polycrystalline materials. After reviewing the generalized concept of a phase of any dimensionality, we discuss recent progress in atomistic computer simulations of GB phase transformations and phase coexistences, including the observation of one-dimensional defects separating GB phases (defects in defects). Computational predictions compare well with experimental observations of multiple GB phases and segregation-induced phase transformations. An intriguing open question of GB thermodynamics is whether the GB free energy can be driven to a zero value by increasing solute segregation. We review recent efforts to understand this ultimate thermodynamic stabilization of GB phases and the possible polycrystalline microstructures that may arise. An outlook for future research in the field is discussed.

Materials science↗
NASA NTRS1985

Implications of Convection in the Moon and the Terrestrial Planets

The early evolution of the Moon and its implications for the early evolution of the Earth was studied. The study is divided into two parts: (1) studies of core formation. Cosmochemical studies strongly favor a near-homogeneous accretion of the Earth. It is shown that core segregation probably occurred within the first 10,000 years of Earth history. It is found that dissipative heating may be a viable mechanism for core segregation if sufficiently large bodies of liquid iron can form; (2) early thermal evolution of the Earth and Moon. The energy associated with the accretion of the Earth and the segregation of the core is more than sufficient to melt the entire Earth. The increase in the mantle liquidus with depth (pressure) is the dominant effect influencing heat transfer through the magma ocean. It is found that a magma ocean with a depth of 100 km would have existed as the Earth accreted. It is concluded that this magma ocean zone refined the earth resulting in the simultaneous formation of the core and the atmosphere during accretion. The resulting mantle was a well-mixed solid with a near pyrolite composition.

Turcotte, D. L.↗
DOE OSTI2021

Compositional patterning in irradiated alloys: Effective potentials and effective interfacial energy

Compositional patterning (CP) in binary alloys during energetic particle irradiation is studied using a kinetic model that considers two competing kinetic processes, a thermally activated one promoting macroscopic phase separation (MPS) of the concentration field c(r,t) and a forced one resulting in finite-range random atomic mixing. The forced mixing is modeled by a Gaussian relocation distribution with a characteristic distance R. A series of approximate kinetic models are introduced by expanding the mixing function into a series of n terms, thus replacing the non-local evaluations of the concentration field c(r'-r,t) by local derivatives of c(r,t). This approach makes it possible to obtain exact effective potentials and build steady-state diagrams for each order-n model. Phase field (PF) simulations using these order-n models reveal that near the onset of patterning, phase evolution is accurately described using an order-3 model, which changes smoothly from an extended Cahn-Hilliard free energy in the MPS regime to a one-mode Swift-Hohenberg functional in the CP regime. Deeper into the patterning regime, higher-order models are required to achieve convergence, yielding square-like concentration profiles characteristic of a strong segregation regime. These higher-order effective free energies are analogous to multimodal Swift-Hohenberg functionals. Here, a new definition for the effective interfacial energy is proposed in the CP regime, since the interfacial area is no longer an excess quantity in that regime, precluding the use of the standard thermodynamic definition of interfacial energy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Local halide heterogeneity drives surface wrinkling in mixed-halide wide-bandgap perovskites

Compositional heterogeneity in wide-bandgap (1.8 - 2.1 eV) mixed-halide perovskites is a key bottleneck in the processing of high-quality solution-processed thin films and prevents their application in efficient multijunction solar cells. Notably, mixed-cation (formamidinium-methylammonium) wide-bandgap perovskite films are prone to form micrometer-scale wrinkles which can interfere with the smooth surfaces ideal for multijunction devices. Here, we study the formation dynamics of wrinkled mixed-halide perovskite films and its impact on the local composition and optoelectronic properties. We use in situ X-ray scattering during perovskite film formation to show that crystallization of bromide-rich perovskites precedes that of mixed-halide phases in wrinkled films cast using an antisolvent-based process. Using nanoscopic X­-ray fluorescence and hyperspectral photoluminescence imaging, we also demonstrate the formation of iodide- and bromide-rich phases in the wrinkled domains. This intrinsic spatial halide segregation results in an increased local bandgap variation and Urbach energy. Morphological disorder and compositional heterogeneity also aggravate the formation of sub-bandgap electronic defects, reducing photostability and accelerating light-induced segregation of iodide and bromide ions in thin films and solar cells.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Local Multimodal Electro-Chemical-Structural Characterization of Solid-Electrolyte Grain Boundaries

Typical models of polycrystalline ionic materials treat the grain boundary properties as single valued, without consideration of the full range of values that define the macroscopically measured average. Here a unique experimental platform suitable for local multimodal characterization of individual grain boundaries in bicrystal fibers is reported. A variation of three orders of magnitude in the grain boundary conductivity of ceria is observed, as measured across six individual bicrystals by both alternating current impedance spectroscopy and direct current (D.C.) linear sweep voltammetry. Nonlinear behavior of the D.C. measurements is consistent with resistance due to a space charge effect. Time-of-flight secondary ion beam spectroscopy reveals a correlation between grain boundary resistance and the concentration of impurities Si, Al, and Ca segregated at the grain boundaries, although the bulk concentrations of these impurities are negligible. Electron backscatter diffraction analysis of the crystal orientations suggests a correlation between the misorientation across the grain boundaries and grain boundary resistance. These correlations point towards a grain boundary resistance that arises from impurity-generated space charge effects and variations in impurity concentration and hence resistivity driven by the energetics of impurity segregation to grain boundaries of differing surface energies.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Microstructural stability and mechanical properties of the as-cast and heat-treated newly developed TiNbCrTa refractory complex concentrated alloy

In this study, a TiNbCrTa refractory complex concentrated alloy (RCCA) was prepared using vacuum arc remelting. The microstructural evolution and mechanical properties of both as-cast and heat-treated RCCA samples were analyzed. Heat treatment (HT) was performed at 800–1200 °C for 1 h in a vacuum-sealed environment. These samples exhibited a formation of Cr 2 Nb and Cr 2 Ti Laves phases. A variation in elemental distribution was observed, with interdendritic (ID) regions showing higher fractions of Ti and Cr, while the dendritic regions had a greater concentration of Ta and Nb. Micro-segregation at the IDs was confirmed through energy dispersive x-ray spectroscopy mapping, which inferred the formation of Cr- and Ti-rich phases during HT at 800–1200 °C. High-temperature HT at 1200 °C for 1 h led to the evolution of the hcp omega phase. Prolonged HT at 1200 °C for 96 h resulted in the evolution of a Cr-rich Laves phase (Cr 2 Ta), which was homogeneously distributed within the microstructure, indicating an unstable microstructure. Furthermore, despite prolonged HT, a variation in the elemental distribution persisted due to the presence of dendritic and ID regions. Electron backscattered diffraction analysis revealed the presence of bcc and hcp phases in the dendritic and ID regions, respectively, of the as-cast and HTed samples. The as-cast samples demonstrated a high compressive strength of approximately 2 GPa. Micro-hardness values increased with the HT temperature up to 1000 °C. Further increases under HT conditions did not significantly reduce the microhardness value, whereas prolonged HT at 1200 °C led to an increase in the microhardness value. Overall, the newly developed TiNbCrTa RCCA exhibited high-strength behavior even after the phase transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗