SEARCH · Search NASA

Results for “severe storms”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Disentangling the Influences of Storm-Relative Flow and Horizontal Streamwise Vorticity on Low-Level Mesocyclones in Supercells

Sufficient low-level storm-relative flow is a necessary ingredient for sustained supercell thunderstorms and is connected to supercell updraft width. Assuming a supercell exists, the role of low-level storm-relative flow in regulating supercells’ low-level mesocyclone intensity is less clear. One possibility considered in this article is that storm-relative flow controls mesocyclone and tornado width via its modulation of overall updraft extent. This hypothesis relies on a previously postulated positive correspondence between updraft width, mesocyclone width, and tornado width. An alternative hypothesis is that mesocyclone characteristics are primarily regulated by horizontal streamwise vorticity irrespective of storm-relative flow. A matrix of supercell simulations was analyzed to address the aforementioned hypotheses, wherein horizontal streamwise vorticity and storm-relative flow were independently varied. Among these simulations, mesocyclone width and intensity were strongly correlated with horizontal streamwise vorticity, and comparatively weakly correlated with storm-relative flow, supporting the second hypothesis. Accompanying theory and trajectory analysis offers the physical explanation that, when storm-relative flow is large and updrafts are wide, vertically tilted streamwise vorticity is projected over a wider area but with a lesser average magnitude than when these parameters are small. These factors partially offset one another, degrading the correspondence of storm-relative flow with updraft circulation and rotational velocity, which are the mesocyclone attributes most closely tied to tornadoes. In conclusion, these results refute the previously purported connections between updraft width, mesocyclone width, and tornado width, and emphasize horizontal streamwise vorticity as the primary control on low-level mesocyclones in sustained supercells.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Predicting cutoff L-shells of solar protons using the GPPSn particle dataset

Solar energetic protons (SEPs) arriving at the Earth trigger severe radiation storms in the near-Earth space, directly impacting space missions operating at various altitudes. Therefore, monitoring SEP events and predicting the penetration depths of solar protons are critical for aerospace sectors. Building on previous efforts, here we demonstrate the feasibility of using proton measurements from the Global Prompt Proton Sensor network (GPPSn), enabled by Los Alamos National Laboratory developed combined X-ray dosimeters aboard GPS satellites, to characterize and predict the penetration of solar protons into the geomagnetic field. The inclined medium-Earth-orbits (MEOs) of the global GPS constellation offer a unique advantage of allowing simultaneous measurements of penetrating solar protons inside both open- and closed-field line regions. Therefore, the L-profiles of ∼10s–100 MeV solar protons and their associated cutoff L-shells can be determined from the GPPSn dataset, using predefined threshold proton flux values rather than traditional flux ratios. After examining a list of SEP event intervals across solar cycles 23, 24 and 25—including the 2024 Mother’s Day superstorm, we showcase how the latest GPPSn proton dataset (release v1.10), reprocessed and calibrated, can not only be used to monitor solar proton distributions inside the dynamic geomagnetic field for individual events, but also to derive a new empirical model linking cutoff L-shells with several key space weather parameters. This newly developed SEPCL-MEO model demonstrates high predictive performance; for example, predictions for > 30 MeV solar protons yield a correlation coefficient of 0.85 and performance efficiency of 0.67 when validated against GPPSn observations. Results from this pilot study underscores the scientific and operational value of the GPPSn dataset, and this dataset—when paired with machine-learning techniques—can play a critical role in observing and predicting the effects of future incoming SEP events, including extreme ones.

58 GEOSCIENCES↗

DOE OSTI2025

Investigation of the genesis and intensification of simultaneous cyclones in the Arabian sea and Bay of Bengal in November 2020

The North Indian Ocean (NIO), which includes the Bay of Bengal (BoB) and the Arabian Sea (AS), is frequently impacted by tropical cyclones (TCs). Notably, in November 2020, the simultaneous occurrence of Cyclones Gati in the AS and Nivar in the BoB presented a rare and compelling phenomenon worthy of investigation. This study delves into the underlying mechanisms driving the genesis and intensification of these two Very Severe Cyclonic Storms (VSCS). Key contributing factors include elevated sea surface temperatures (SST) and Tropical Cyclone Heat Potential (TCHP), both crucial for the development and intensification of TCs. Notably, the BoB exhibits higher TCHP values compared to the AS, which facilitated greater intensity for Nivar over Gati. Despite their concurrent formation, the genesis processes of Gati and Nivar were distinct. The early November development of Gati in the AS was modulated by the Rossby wave and the Madden–Julian Oscillation (MJO). Subsequently, the eastward propagation of the MJO triggered the formation of Cyclone Nivar in the BoB, enhancing convective activity from the AS and coinciding with the arrival of a downward-propagating Rossby wave. This study provides a comprehensive analysis of the simultaneous formation of Gati and Nivar, contributing novel insights into the complex interactions between oceanic and atmospheric phenomena. In conclusion, such insights are vital for enhancing the predictive capabilities for destructive weather events in the NIO.

Climate Change↗

DOE OSTI2024

Functionally Assembled Terrestrial Ecosystem Simulator (FATES) for Hurricane Disturbance and Recovery

Tropical cyclones are an important cause of forest disturbance, and major storms caused severe structural damage and elevated tree mortality in coastal tropical forests. Model capabilities that can be used to understand post-hurricane forest recovery are still limited. We use a vegetation demography model, the Functionally Assembled Terrestrial Ecosystem Simulator, coupled with the Energy Exascale Earth System Model Land Model (ELM-FATES) to study the processes and the key factors regulating post-hurricane forest recovery. We implemented hurricane-induced forest damage, including defoliation, structural biomass reduction, and tree mortality, performed ensemble model simulations, and used random forest feature importance. For the simulation in the Luquillo Experimental Forest, Puerto Rico, we identified factors controlling the post-hurricane forest recovery, and quantified the sensitivity of key model parameters to the post-hurricane forest recovery. The results indicate a tendency for the Bisley forests to shift toward the light demanding plant functional type (PFT) when the pre-hurricane biomass between the light demanding and shade tolerant PFTs is nearly equal and forests experience hurricane disturbance with mortality >60% for both the two PFTs. Under more realistic conditions where the shade tolerant PFT is initially dominant, mortality >80% is required for a shift toward dominance of the light demanding PFT at Bisley. Hurricane mortality and background mortality are the two major factors regulating post-hurricane forest recovery in simulations. This research improves understanding of the ELM-FATES model behavior associated with hurricane disturbance and provides guidance for dynamic vegetation model development in representing hurricane induced forest damage with varied intensities.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Cutoff and Emergence of Dart Leaders in an Unbranched Positive Leader Simulation

Channel cutoff is the process by which an active lightning channel cools down, goes dark, and loses its ability to effectively conduct electricity. Current cutoff precedes several lightning phenomena, notably dart leaders and return strokes, but the process by which a hot, highly‐conducting leader channel can undergo current cutoff is poorly understood. In this work, we present self‐consistent simulations of positive leader propagation, which include coupled treatment of electrodynamics and plasma physics. The unstable positive leader spontaneously undergoes channel cutoff and creates the conditions for the emission of dart leaders, that is, it accumulates a packet of negative charge at the intersection between cutoff and conducting channel segments. A residual conductivity in the cutoff section facilitates the conversion of the electric field enhancement into a traveling wave, which retraces and reionizes the channel. This is critical for allowing the frail positive leader to keep propagating.

58 GEOSCIENCES↗

DOE OSTI2025

Impact of Urbanization on Convection, Lightning, and Precipitation Over the Houston Metropolitan Area: Case Study Simulation From the TRACER Campaign

This study investigates the effects of urbanization, specifically land use change and anthropogenic emissions (AE), on convection, lightning, and surface precipitation for a case of summertime sea‐breeze convection observed over the Houston metropolitan area. The unique capabilities of the NASA‐Unified Weather Research and Forecasting model allows us to conduct a series of sensitivity experiments with complex configurations, in particular including multi‐year land model spin‐up simulations, treatment of aerosols and their precursors, and explicit cloud charging and lightning. The simulation results show that urban land use primarily alters the temporal evolution of convection, lightning, and surface precipitation, leading to late afternoon thunderstorm development. The decrease in latent heat flux from the land surface caused by urbanization weakens convection in the early afternoon, while a condition suitable for convection development is maintained in the late afternoon due to less stabilization of the lower troposphere by the weaker convection development and high sensible heat flux from the surface. On the other hand, anthropogenic aerosols directly enhance convection, lightning, and surface precipitation by increasing convective updrafts due to the aerosol‐induced convective invigoration. The combined effects of urban land use and AE lead to even stronger thunderstorms in the late afternoon, mostly consistent with observations. These results indicate that urbanization increases the probability of late afternoon thunderstorms over the Houston area during the summer season. Advanced weather forecasting models that incorporate these urbanization effects might support sustainable urban planning to better mitigate the impacts of urbanization on local weather and public safety.

Iguchi, T. [Univ. of Maryland, College Park, MD (U↗

DOE OSTI2025

Quantifying the Thermodynamic Impacts on the Atmospheric Boundary Layer due to the Sea Breeze in the Coastal Houston Region

The atmospheric boundary layer (ABL) is unique in coastal regions because of kinematic and thermodynamic influences from continental and marine environments. Sea-breeze (SB) circulations act to equilibrate the land–sea temperature gradient through advecting marine air onshore. The strength of the SB varies in terms of stability, temperature, and moisture advection and influences air quality and weather forecasts. The Tracking Aerosol Convection Interactions Experiment (TRACER) collected a wealth of data on coastal boundary layer evolution, including observations from uncrewed aerial systems (UASs). Vertical profiles of temperature, humidity, and winds were collected by the OU CopterSonde UAS from June to September in the coastal region of Houston. These profiles offer 5-m vertical resolution, on average, every 30 min through diurnal transitions, SB events, and nearby deep convection. During the campaign, CopterSonde observations were gathered through 17 SB events, six of which led to convection initiation. The UAS data can resolve the thermodynamic evolution and interactions between the SB and the preexisting convective boundary layer. Results show large variability across observed SBs and their impacts on temperature and moisture. The intensity of thermodynamic changes depends on the time of sea-breeze passage and influence from the Galveston Bay Breeze, a secondary marine circulation commonly observed in this region. In quantifying the spectrum of SB impacts, equivalent potential temperature θ e is used to contextualize its role in convection initiation and evolution. In conclusion, while all SBs tend to increase θ e from moisture advection, the rate and timing of the θ e rise can distinguish convective from nonconvective cases.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

A Formula for the Maximum Vertical Velocity in Supercell Updrafts

In supercell environments, previous authors have shown strong connections between the vertical wind shear magnitude, updraft width, and entrainment. Based on these results, it is hypothesized that the influences of entrainment-driven dilution on buoyancy and maximum updraft vertical velocity w in supercell environments are a predictable function of the vertical wind shear profile. It is also hypothesized that the influences of pressure perturbation forces on maximum updraft w are small because of a nearly complete offset between upward dynamic pressure forces and downward buoyant pressure forces. To address these hypotheses, we derive a formula for the maximum updraft w that incorporates the effects of entrainment-driven dilution on buoyancy but neglects pressure gradient forces. Solutions to this formula are compared with output from previous numerical simulations. This formula substantially improves predictions of maximum updraft w over past CAPE-derived formulas for maximum updraft w, which supports the first hypothesis. Furthermore, integrated vertical accelerations along trajectories show substantial offsets between dynamic and buoyant pressure forces, supporting the second hypothesis. It is argued that the new formula should be used in addition to CAPE-derived measures for w in forecast and research applications when accurate diagnosis of updraft speed is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Automated Model for Improved Mapping of Country-Scale High-Resolution Coastal Bathymetry

Accurate and up-to-date maps of coastal bathymetry are critical for a variety of sectors from vessel navigation to port construction and are increasingly vital to inform coastal infrastructure management amid accelerating sea-level rise and more frequent and severe storm-surge events. The primary challenges to accurate and efficient bathymetric mapping from optical remote sensing are: accurately modeling light attenuation in both the atmosphere and water column; and inefficient data processing pipelines for highresolution satellite imagery. To address the effects of light attenuation within the water-column we have developed a novel physics-based bathymetry model that accounts for variations in water-column inherent optical properties on a pixel-by-pixel basis in optically-shallow aquatic environments, which represents a major advancement. For applications to satellite imagery, we have developed a software package that automatically applies the robust 6S atmospheric correction algorithm, estimates the bottom depth from the physics-based bathymetry model, which corrects for attenuation by suspended particulate matter and colored dissolved organic matter in the water column on a pixel-by-pixel basis, and leverages highperformance computing for rapid application to region-scale (e.g., CONUS) 2-meter resolution imagery datasets. Our approach is tailored to sensors that collect data at two-meter resolution with high return times for frequent updates. We mapped 591 WorldView satellite images for Florida, North Carolina, and Alaska and validated the maps against LiDAR-derived bathymetry data. Results show median RMSE of 1.75, 1.59, and 2.67 meters, respectively. By combining the strengths of Oak Ridge National Laboratory in high-performance computing and remote-sensing science with the water-column modeling expertise of Scripps Institution of Oceanography we advance the state of bathymetric mapping capability.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2026

Aerosol-deep convection interaction based on joint cell-thermal tracking in Large Eddy Simulations during the TRACER campaign

In cumulus clouds, aerosol concentrations control cloud droplet concentrations, modifying cloud radiative properties, precipitation processes, and cloud electrification. However, mechanisms of aerosol-deep convection interactions are not well understood due to complex cloud dynamics and microphysics. We investigate the interaction of aerosols with isolated deep convection using Large Eddy Simulations of two cases during the TRacking Aerosol Convection interactions ExpeRiment (TRACER) near Houston, Texas, using a joint cell-thermal tracking algorithm. Cumulus thermals are droplet generators, since supersaturation and droplet nucleation coincide with thermal centers, where the strongest updrafts occur. Primary ice crystal formation does not take place inside thermals, but at layers where previous thermals detrained moisture. As subsequent thermals containing supercooled droplets penetrate these layers, hail and graupel form at or near these thermals. Higher aerosol concentrations result in higher droplet concentrations that suppress drizzle, delay warm rain processes, and transport more moisture aloft. This increases snow and ice amount, as well as graupel and hail, leading to more lightning. Polluted thermals initiate at slightly higher altitudes, and are slightly larger and faster, suggesting a weak invigoration. We also find more thermals per cell, but fewer isolated cells, since convection is more aggregated and intense, especially near the end of the 24 h simulation. Non-linear mesoscale feedback likely triggered by temperature and moisture responses to aerosol-thermal interactions causes the aggregation. Time-lagged aerosol-reinitialization experiments show that the mesoscale response is the predominant forcing for the invigoration. These changes happen within one day, on a smaller scale than previously suggested.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Operational wind plants increase planetary boundary layer height: an observational study

As wind energy deployment grows, interactions between wind plants and the surrounding environment become more prevalent. The current investigation seeks to understand these interactions by characterizing the impact of wind plants on the planetary boundary layer height (PBLH), utilizing observations from the American WAKE experimeNt (AWAKEN) campaign. Given the ambiguity of the definition of PBLH under stable atmospheric conditions, where the impact of wind plants is expected to be strongest, a comparison of different methods for identifying PBLH is first conducted using data collected by multiple types of instruments. The Heffter method is selected as the thermodynamic method because it generates the most consistent results for the radiosonde and infrared spectrometer. A minimum vertical velocity variance method is used for a turbulence-based definition. Using both of these methods, the values of PBLH measured at spatially distributed sites are compared under a range of atmospheric conditions. Both methods show a clear increase in PBLH downstream of a wind plant for stable conditions. These impacts are strongest when the upstream PBLH is shallow (less than 0.25 km), with the thermodynamic method showing a PBLH increase of 35 %–39 % and the turbulence-based method showing a 143 % increase. At a site 20 km downstream of the wind plant, these effects are no longer observed, suggesting PBLH is not influenced by the wind plant at this distance. The results of this investigation show that wind plants can modify PBLH in their vicinity. As PBLH is a key parameter for numerical models, this insight into wind plant–atmosphere interactions can be used to validate and improve the accuracy of wind energy forecasts.

17 WIND ENERGY↗

DOE OSTI2021

Combined Mesonet and Tracker

Title: Combined Mesonet and Trackers (UNL Mobile Mesonets) Authors University of Nebraska PI: Adam Houston, UNL Professor (ahouston2@unl.edu) Mailing Address: 126 Bessey Hall P.O. Box 880340 Lincoln, NE 68588-0340 CoMeT Overview The University of Nebraska-Lincoln operates three Combined Mesonet and Tracker (CoMeTs). CoMeTs are Ford Explorers (model years 2015, 2017, and 2019) with forward-mounted suites of meteorological sensors and dual moonroofs, combining the capability of a mobile mesonet to collect near-surface observations with the capability of an unmanned aircraft systems (UAS) tracker vehicle, which enables an observer in the second row of seats to see the aircraft and maintain compliance with Federal Aviation Administration policies on UAS operation. The CoMeTs collect observations of slow temperature and humidity at ~2 m above ground level (AGL) using a Vaisala HMP155A, fast temperature at ~2 m AGL using a Campbell Scientific 109SS-L thermistor, pressure at ~2.5 m AGL using a Vaisala PTB210, wind speed and direction at ~3.25 m AGL using an R.M. Young 05103 propeller anemometer, and vehicle heading using a KVH Industries C-100 fluxgate compass (Barbieri et al. 2019). The HMP155A and 109SS-L thermistor are shielded and aspirated within a U-tube (Waugh and Frederickson 2010; Houston et al. 2016). This list of sensors is also included in the CoMeT data file metadata. Manufacturer specifications for these instruments are given in Table 1 of Hanft and Houston (2018). The reported measured quantities are summarized below.CoMeT-3 was funded through an equipment allocation included in the NSF TORUS award (AGS-1824649). Instrument Description The specific sensors included on each CoMeT are summarized in the table at the end of this section. In general each CoMeT collects observations of slow temperature and humidity at ~2 m above ground level (AGL) using a Vaisala HMP155, fast temperature at ~2 m AGL using a Campbell Scientific 109SS-L thermistor, pressure at ~2.5 m AGL using a Vaisala PTB210 barometer with a Gill pressure port, wind speed and direction at ~3.25 m AGL using an R.M. Young 05103 propeller anemometer, position using a Garmin 19x HVS receiver, and vehicle heading using a KVH Industries C-100 fluxgate compass. The HMP155 and 109SS are shielded and aspirated within a U-tube (Waugh and Frederickson 2010; Houston et al. 2016). Fast temperature and corrected RH measurements (using sensors housed within the U-tube) have a time constant of 10-12 s based on data collected across a temperature and RH shock during the CLOUD-MAP 2017 calibration/validation tests on June 26, 2017. Vehicle speed was < 10 kts for this test. CoMeT-1 CoMeT-2 CoMeT-3 Slow Temperature Slow RH Vaisala HMP155A-L20-PT Part #: 22280-7 Vaisala HMP155E Part #: E1AA11A0B1A1A0A Vaisala HMP155E Part #: E1AA11A0B1A1A0A Fast temperature Campbell Scientific 109SS-L20-PT Part #: 21448-3 Campbell Scientific 109SS-L12-PW Part #: 21448-109 Campbell Scientific 109SS-L12-PW Part #: 21448-150 Pressure Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Vaisala PTB-210 Part #: A1A1B Gill Pressure Port Part #: 61002 Wind RM Young 05103-L20-PT Part #: 18435-310 RM Young 05103-L20-PW Part #: 18435-244 RM Young 05103-L20-PW Part #: 18435-244 GPS Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Garmin GPS 19x HVS (NMEA 0183) Part #: 010-01010-00 Compass KVH C-100 Part #: 01-0177-15 KVH C-100 Part #: 01-0177-15 KVH C-100 Part #: 01-0177-15 Logger Campbell Scientific CR6-NA-XT-SW Part #: 28385-9 Campbell Scientific CR6-WIFI-XT-SW Part #: 28385-6 Campbell Scientific CR6-WIFI-XT-SW Part #: 28385-6 Data Collection and Real-Time Processing The reported measured quantities are summarized in the table below. Quantity Units Source Epoch time Seconds GPS Latitude and longitude Degrees GPS Altitude m GPS Pressure hPa PTB210 Temperature (fast) deg C 109SS-L Temperature (slow) deg C HMP155 RH (slow) % HMP155 Vehicle speed m/s GPS Vehicle heading deg C-100 and GPS In addition to the measured variables, several derived variables are calculated. Corrected/fast relative humidity (%) Relative humidity is adjusted to the fast temperature following Richardson et al. (1998) and Houston et al. (2016). Water vapor mixing ratio (g/kg) Dew point temperature (°C) Potential temperature (Kelvin) Virtual potential temperature (Kelvin) Equivalent potential temperature (Kelvin) Regular intercomparisons between all three CoMeTs were performed during TORUS 2019. Comparisons were also conducted between CoMeT-1 and CoMeT-2 during LAPSE-RATE (2018) on 14 July. In these intercomparisons, the vehicles were parked adjacent to each other aligned perpendicular to (and facing into) the wind. To minimize engine heating effects, intercomparisons were only conducted when the wind speed was >10 kts. Data Format Original data files for each deployment are saved as text files and then converted to NetCDF. NetCDF versions have units that are CF compliant and may not match the original units in the txt files. The naming convention for the NetCDF files is as follows: UNL.CoMeT3.{deployment date YYYYMMDD}.{start time of observation collection in UTC HHMM}.L2.{post-processing codes}.cdf example: UNL.CoMeT3.20190627.1931.L2.g1.f1.cdf Post-processing codes are included to track modifications to the raw data. These codes are closely connected to error flags associated with each record. Each letter corresponds to a particular instrument: g: GPS p: Barometer tf: Fast temperature ts: Slow temperature rh: Relative humidity f: Compass w: Wind monitor a: All instruments Each number corresponds to a particular post-processing action described more below. Measured and derived variables are included in the following table. Variable Heading Standard Name Units time Time seconds since 00:00:00, 01-01-1970 Alt Altitude meters lat Latitude degrees north lon Longitude degrees east fast_temp Air Temperature kelvin slow_temp Air Temperature kelvin pressure Air Pressure pascals logger_RH Relative Humidity percent calc_corr_RH Relative Humidity percent wind_speed Wind Speed meters per second wind_dir Wind From Direction degrees vehicle_dir Vehicle Direction degrees dewpoint Dew Point Temperature kelvin mixing_ratio Humidity Mixing Ratio g/g theta Air Potential Temperature kelvin theta_v Virtual Potential Temperature kelvin theta_e Equivalent Potential Temperature Kelvin error_flag The error_flag variable is a string that matches the post-processing codes listed above. All instruments will have an associated code, but will have a “0” if the datum is unchanged from the initial processed value. Error Codes The following table summarizes the error codes for data collected before 2020: Error Code Relevant CoMeT Description g1 1,2,3 Exact correction. GPS position and time reprocessed from raw data g2 1 As far as we can tell this is an exact correction to an error in the GPS time. During the correct time periods the time suddenly went backwards ~250s and stayed at this offset for 750s when it corrected itself. The offset was applied to the “time warp” period. p1 2 Approximate correction. Hole in the pressure tube connecting the pressure port to the barometer. Resulted in erroneously low air pressure measurements when the vehicle was in motion. Derived variables recalculated (dew point temperature [e depends on qv and p], water vapor mixing ratio, potential temperature, virtual potential temperature, equivalent potential temperature) a1 3 Exact correction. Missing data reprocessed from raw data a2 1 Bug fix to bias correction for ts1, ts2, and rh1: water vapor mixing ratio was off by a factor of 10 and virtual potential temperature was wrong because of this. f1 3 No correction, missing data. Fluxgate compass inoperable. Wind speed and direction calculated using GPS-derived vehicle heading instead. rh1 1 Approximate correction. Constant bias of +1.7% removed from relative humidity. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) ts1 1 Approximate correction. Constant bias of +0.6 K removed from slow temperature. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) ts2 1 Approximate correction. Constant bias of +1.0 K removed. Derived variables recalculated (corrected/fast relative humidity, dew point temperature, water vapor mixing ratio, virtual potential temperature, equivalent potential temperature) References Bolton, D., 1980: The Computation of Equivalent Potential Temperature. Mon. Wea. Rev., 108, 1046–1053, https://doi.org/10.1175/1520-0493(1980)108<1046:TCOEPT>2.0.CO;2. Hanft, W., and A. L. Houston, 2018: An Observational and Modeling Study of Mesoscale Air Masses with High Theta-E. Mon. Wea. Rev., 146, 2503–2524, https://doi.org/10.1175/MWR-D-17-0389.1.Wexler Houston, A. L., R. J. Laurence III, T. W. Nichols, S. Waugh, B. Argrow, and C. L. Ziegler, 2016: Intercomparison of unmanned aircraft-borne and mobile mesonet atmospheric sensors. Journal of Atmospheric and Oceanic Technology. 33, 1569-1582, doi: 10.1175/JTECH-D-15-0178.1. Lowe, P. R., 1977: An Approximating Polynomial for the Computation of Saturation Vapor Pressure. J. Applied Meteorology, 16, 100–103. Richardson, S. J., S. E. Frederickson, F. V. Brock, and J. A. Brotzge, 1998: Combination temperature and relative humidity probes: Avoiding large air temperature errors and associated relative humidity errors. Preprints, 10th Symp. On Meteorological Observations and Instrumentation, Phoenix, AZ, Amer. Meteor. Soc., 278–283. Waugh, S., and S. E. Frederickson, 2010: An improved aspirated temperature system for mobile meteorological observations, especially in severe weather. 25th Conf. on Severe Local Storms, Denver, CO, Amer. Meteor. Soc., P5.2. [Available online at https://ams.confex.com/ams/25SLS/techprogram/paper_176205.htm.]

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Long-term trends in storm surge climate derived from an ensemble of global surge reconstructions

We address the challenge, due to sparse observational records, of investigating long-term changes in the storm surge climate globally. We use two centennial and three satellite-era daily storm surge time series from the Global Storm Surge Reconstructions (GSSR) database and assess trends in the magnitude and frequency of extreme storm surge events at 320 tide gauges across the globe from 1930, 1950, and 1980 to present. Before calculating trends, we perform change point analysis to identify and remove data where inhomogeneities in atmospheric reanalysis products could lead to spurious trends in the storm surge data. Even after removing unreliable data, the database still extends existing storm surge records by several decades for most of the tide gauges. Storm surges derived from the centennial 20CR and ERA-20C atmospheric reanalyses show consistently significant positive trends along the southern North Sea and the Kattegat Bay regions during the periods from 1930 and 1950 onwards and negative trends since 1980 period. When comparing all five storm surge reconstructions and observations for the overlapping 1980–2010 period we find overall good agreement, but distinct differences along some coastlines, such as the Bay of Biscay and Australia. We also assess changes in the frequency of extreme surges and find that the number of annual exceedances above the 95th percentile has increased since 1930 and 1950 in several regions such as Western Europe, Kattegat Bay, and the US East Coast.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2024

Cascading Transformer Failure Probability Model Under Geomagnetic Disturbances

This paper develops a probabilistic model to assess the cascading failure of transformers in an electric power grid experiencing geomagnetic disturbances caused by a solar storm. We propose a model in which the probability of failure is a function of the intensity of the solar storm, the physical properties of the transformer, the geographical location of the transformer, and the flow of electrical power. We demonstrate the proposed model using the IEEE 14-bus system and several notional solar storms. The model quickly computes the initial and cascading failure probabilities of the transformers in the system as a first step towards quantifying the risks posed by future solar storms.

Shukla, Pratishtha↗

DOE OSTI2020

Application of multidimensional structural characterization to detect and describe moderate forest disturbance

The study of vegetation community and structural change has been central to ecology for over a century, yet the ways in which disturbances reshape the physical structure of forest canopies remain relatively unknown. Moderate severity disturbances affect different canopy strata and plant species, resulting in variable structural outcomes and ecological consequences. Terrestrial lidar (light detection and ranging) offers an unprecedented view of the interior arrangement and distribution of canopy elements, permitting the derivation of multidimensional measures of canopy structure that describe several canopy structural traits (CSTs) with known links to ecosystem function. We used lidar-derived CSTs within a machine learning framework to detect and describe the structural changes that result from various disturbance agents, including moderate severity fire, ice storm damage, age-related senescence, hemlock woolly adelgid, beech bark disease, and chronic acidification. We found that fire and ice storms primarily affected the amount and position of vegetation within canopies, while acidification, senescence, pathogen, and insect infestation altered canopy arrangement and complexity. Only two of the six disturbance agents significantly reduced leaf area, counter to common assumptions regarding many moderate severity disturbances. While findings are limited in their generalizability due to lack of replication among disturbances, they do suggest that the current limitations of standard disturbance detection methods—such as optical-based remote sensing platforms, which are often above-canopy perspectives—limit our ability to understand the full ecological and structural impacts of disturbance, and to evaluate the consistency of structural patterns within and among disturbance agents. A more broadly inclusive definition of ecological disturbance that incorporates multiple aspects of canopy structural change may potentially improve the modeling, detection, and prediction of functional implications of moderate severity disturbance as well as broaden our understanding of the ecological impacts of disturbance.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Intercomparison of Dynamically and Statistically Downscaled Climate Change Projections over the Midwest and Great Lakes Region

Downscaling of global climate model (GCMs) simulations is a key element of regional-to-local-scale climate change projections that can inform impact assessments, long-term planning, and resource management in different sectors. Here, we conduct an intercomparison between statistically and dynamically downscaled GCMs simulations using the hybrid delta (HD) and the Weather Research and Forecast (WRF) Model, respectively, over the Midwest and Great Lakes region to 1) validate their performance in reproducing extreme daily precipitation (P) and daily maximum temperature (T max ) for summer and winter and 2) evaluate projections of extremes in the future. Our results show the HD statistical downscaling approach, which includes large-scale bias correction of GCM inputs, can reproduce observed extreme P and T max reasonably well for both summer and winter. However, raw historical WRF simulations show significant bias in both extreme P and T max for both seasons. Interestingly, the convection-permitting WRF simulation at 4-km grid spacing does not produce better results for seasonal extremes than the WRF simulation at 12 km using a parameterized convection scheme. Despite a broad similarity for winter extreme P projections, the projected changes in the future summer storms are quite different between downscaling methods; WRF simulations show substantial increases in summer extreme precipitation, while the changes projected by the HD approach exhibit moderate decreases overall. The WRF simulations at 4 km also show a pronounced decoupling effect between seasonal totals and extreme daily P for summer, which suggests that there could be more intense summer extremes at two different time scales, with more severe individual convective storms combined with longer summer droughts at the end of the twenty-first century.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2022

Unveiling four decades of intensifying precipitation from tropical cyclones using satellite measurements

Increases in precipitation rates and volumes from tropical cyclones (TCs) caused by anthropogenic warming are predicted by climate modeling studies and have been identified in several high intensity storms occurring over the last half decade. However, it has been difficult to detect historical trends in TC precipitation at time scales long enough to overcome natural climate variability because of limitations in existing precipitation observations. We introduce an experimental global high-resolution climate data record of precipitation produced using infrared satellite imagery and corrected at the monthly scale by a gauge-derived product that shows generally good performance during two hurricane case studies but estimates higher mean precipitation rates in the tropics than the evaluation datasets. General increases in mean and extreme rainfall rates during the study period of 1980–2019 are identified, culminating in a 12–18%/40-year increase in global rainfall rates. Overall, all basins have experienced intensification in precipitation rates. Increases in rainfall rates have boosted the mean precipitation volume of global TCs by 7–15% over 40 years, with the starkest rises seen in the North Atlantic, South Indian, and South Pacific basins (maximum 59–64% over 40 years). In terms of inland rainfall totals, year-by-year trends are generally positive due to increasing TC frequency, slower decay over land, and more intense rainfall, with an alarming increase of 81–85% seen from the strongest global TCs. As the global trend in precipitation rates follows expectations from warming sea surface temperatures (11.1%/°C), we hypothesize that the observed trends could be a result of anthropogenic warming creating greater concentrations of water vapor in the atmosphere, though retrospective studies of TC dynamics over the period are needed to confirm.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Comparing multi-source urban flood indicators: satellite, simulation, and citizen-reported data

Urban flooding arises from complex mechanisms, making it challenging to capture accurately with a single detection method. This study evaluates three complementary approaches to detect flooding across three Chicago neighborhoods: (i) Sentinel-1 synthetic aperture radar (SAR), offering weather-independent, high-resolution (10 m) imagery of surface inundation; (ii) the storm water management model (SWMM), simulating combined sewer overflow and drainage performance; and (iii) citizen-generated 311 service requests, capturing observed flooding impacts. By analyzing six storms ranging from severe to mild, we examine how each source uniquely contributes to identifying urban flood events. SAR imagery effectively identifies standing water but can miss brief flooding due to satellite revisit constraints. SWMM provides detailed insights into system-wide drainage behavior yet may underestimate localized street-level flooding. Meanwhile, 311 calls reflect real-world flooding impacts but are vulnerable to underreporting. Statistical overlap analysis highlights chronic flood hotspots repeatedly identified across multiple detection methods, indicating persistent infrastructure and topographic vulnerabilities. Temporal analysis further reveals that while SWMM flooding aligns closely with rainfall peaks, 311 calls typically precede or persist beyond these peaks. Our findings emphasize the value of using satellite observations, hydrological modeling, and resident-reported data in a complementary manner to better interpret patterns in flood timing, severity, and spatial distribution—providing insights that can inform targeted infrastructure improvements and contribute to urban flood resilience planning.

311↗