Search NASA⌕ Search

SEARCH · Search NASA

Results for “sharp features”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Photoionization and photofragmentation of singly charged positive and negative Sc 3 N @ C 80 endohedral fullerene ions

Photoprocesses of the endohedral fullerene ions $\mathrm{Sc_3N@C_{80}^{+}}$ and $\mathrm{Sc_3N@C_{80}-}$ in the gas phase have been investigated in the photon energy ranges 30-50 eV and 280-420 eV. Single and double ionization as well as single ionization accompanied by the release of a C 2 dimer were observed as a function of the photon energy for the positive parent ion and double detachment was measured for the negative parent ion. The emphasis of the experiments was on the specific effects of the encapsulated trimetallic nitride cluster Sc 3 N on the observed reactions. Clear evidence of photoexcitation near the Sc L edge is obtained with the dominating contributions visible in the one- and two-electron-removal channels. K-vacancy production in the encapsulated central nitrogen atom is seen in the single ionization of $\mathrm{Sc_3N@C_{80}^{+}}$ but is much less pronounced in the photoionization-with-fragmentation channel. Comparison of the cross sections near the carbon K edge with the corresponding channels measured previously in the photoionization of $\mathrm{Lu_3N@C_{80}^+}$ reveal strong similarities. Previously predicted sharp resonance features in the ionization of $\mathrm{Sc_3N@C_{80}^{+}}$ ions below the Sc M edge are not confirmed. Finally, the experiments are accompanied by quantum-chemistry calculations in the Hartree-Fock approximation and by model calculations employing density functional theory (DFT).

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2023

Nonlocal features of the spin-orbit exciton in Kitaev materials

A comparative resonant inelastic x-ray scattering (RIXS) study of three well-known Kitaev materials is presented: 𝛼−Li 2 ⁢IrO 3 , Na 2 ⁢IrO 3 , and 𝛼−RuCl 3 . Despite similar low-energy physics, these materials show distinct electronic properties, such as the large difference in the size of the charge gap. The RIXS spectra of the spin-orbit exciton for these materials show remarkably similar three-peak features, including sharp low energy peak (peak A) as well as transitions between 𝑗 eff = 1/2 and 𝑗 eff = 3/2 states. Comparison of experimental spectra with cluster calculations reveals that the observed three-peak structure reflects the significant role that nonlocal physics plays in the electronic structure of these materials. Here, in particular, the low-energy peak A arises from a holon-doublon pair rather than a conventional particle-hole exciton as proposed earlier. Our study suggests that while spin-orbit assisted Mott insulator is still the best description for these materials, electron itinerancy cannot be ignored when formulating low-energy Hamiltonian of these materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2017

Doppler effect on indirect detection of dark matter using dark matter only simulations

Indirect detection of dark matter is a major avenue for discovery. However, baryonic backgrounds are diverse enough to mimic many possible signatures of dark matter. In this work, we study the newly proposed technique of dark matter velocity spectroscopy. The nonrotating dark matter halo and the Solar motion produce a distinct longitudinal dependence of the signal which is opposite in direction to that produced by baryons. Using collisionless dark matter only simulations of Milky Way like halos, we show that this new signature is robust and holds great promise. We develop mock observations by a high energy resolution x-ray spectrometer on a sounding rocket, the Micro-X experiment, to our test case, the 3.5 keV line. We show that by using six different pointings, Micro-X can exclude a constant line energy over various longitudes at ≥ 3σ. As a result, the halo triaxiality is an important effect, and it will typically reduce the significance of this signal. We emphasize that this new smoking gun in motion signature of dark matter is general and is applicable to any dark matter candidate which produces a sharp photon feature in annihilation or decay.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Improving Nb3Sn Cavity Performance Using Centrifugal Barrel Polishing

Nb3Sn superconducting radiofrequency (SRF) cavities have been an ongoing research topic for many years motivated by the potential for higher accelerating gradients and quality factors compared to niobium SRF cavities. The highest performing Nb3Sn cavities are manufactured using tin vapor-diffusion coating, which creates a Nb3Sn film with a surface roughness of around 100-200 nm. This is thought to be one of the limiting factors for the accelerating gradient of Nb3Sn cavities due to enhancement of magnetic field near sharp surface features. To smooth Nb3Sn SRF cavities, we have developed a mechanical polishing procedure which uses centrifugal barrel polishing to smooth the surface followed by a secondary tin coating step to repair the surface. We show that the accelerating field of a Nb3Sn SRF cavity is improved by applying this procedure. We also investigate the quench mechanism of the polished cavity by utilizing temperature mapping to measure which regions of the cavity e xperience heating during RF operation. We then cut samples from these regions and analyze the film microstructure and chemical composition in 3D using EDS and EBSD measurements together with a focused ion-beam (FIB) tomography technique.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Multiwavelength Observation Campaign of the TeV Gamma-Ray Binary HESS J0632 + 057 with NuSTAR, VERITAS, MDM, and Swift

HESS J0632+057 belongs to a rare subclass of binary systems that emit gamma rays above 100 GeV. It stands out for its distinctive high-energy light curve, which features a sharp "primary" peak and broader "secondary" peak. We present the results of contemporaneous observations by NuSTAR and VERITAS during the secondary peak between 2019 December and 2020 February, when the orbital phase (Φ) is between 0.55 and 0.75. NuSTAR detected X-ray spectral evolution, while VERITAS detected TeV emission. We fit a leptonic wind-collision model to the multiwavelength spectra data obtained over the four NuSTAR and VERITAS observations, constraining the pulsar spin-down luminosity and the magnetization parameter at the shock. Despite long-term monitoring of the source from 2019 October to 2020 March, the MDM observatory did not detect significant variation in Hα and Hβ line equivalent widths, an expected signature of Be-disk interaction with the pulsar. Furthermore, fitting folded Swift-XRT light-curve data with an intrabinary shock model constrained the orbital parameters, suggesting two orbital phases (at Φ D = 0.13 and 0.37), where the pulsar crosses the Be-disk, as well as phases for the periastron (Φ 0 = 0.30) and inferior conjunction (Φ IFC = 0.75). The broadband X-ray spectra with Swift-XRT and NuSTAR allowed us to measure a higher neutral hydrogen column density at one of the predicted disk-passing phases.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2022

Illuminating the Photophysics of Oxygen Atom Transfer in Rare Earth Metal-Organic Complexes

Industrial separations of rare earth metals are reliant on selectivity based on ionic radii, which are time, energy, and resource consuming.1 The unique and discontinuous manifold of energy states associated with the f-electron configurations of the rare earth ions2 offer an opportunity to overcome some of these limitations by incorporating light into the separation process. Here, we use transient absorption spectroscopy to understand the differences in mechanism of light-initiated oxygen atom transfer (OAT) in yttrium (Y) and dysprosium (Dy) rare earth complexes. These metal-organic complexes are functionalized with hexfluoroacetyl-acetonate (hfac) and 4-methylmorpholine-N-oxide (NMMO). After light absorption in the presence of triphenyl phosphine (TPP), the NMMO in the Y-NMMO complex is replaced by the TPPO OAT reaction product. Because the Dy f-electron manifold is accessible to the ligand excited states, while there are no accessible states associated with f-electrons for Y, there are significant differences in reactivity. Transient absorption spectroscopy (TAS) was used to monitor changes after 340 nm photoexcitation of Dy/Y-NMMO or the product complex Dy/Y-TPPO. TAS is a pump-probe technique where a white light probe pulse is delayed relative to a visible pump pulse, which photoexcites a sample. Differences between the ground and excited states are monitored over time. With TAS, we access time scales from 100 fs-400 us to determine the photophysics of the complexes of interest. Photoexcitation of Y-NMMO (Fig. 1A) creates a broad photoinduced absorption (PIA) that evolves into a sharp positive feature over 4.2 ps centered at 450 nm. A secondary feature centered at 550 nm grows in with a 200 ps time constant and remains through the 5 ns time window of our experiment. Control experiments for Y-TPPO reveal that the feature at 450 nm is due to internal dynamics of the hfac ligand, while the 550 nm shoulder is due to the presence of the NMMO. Comparing kinetics at 550 nm for Y-NMMO and Dy-NMMO (Fig. 1B) shows that while Y exhibits a distinct growth in the NMMO feature, the Dy decays almost completely within 5 ns. Control experiments with Dy-TPPO prove that the ligand excited states centered on the hfac ligand are deactivated via energy transfer to the Dy manifold within 200 ps. This deactivation leads to significant differences in OAT reactivity between Y and Dy.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2020

Hydrogen desorption from the surface and subsurface of cobalt

The influence of coverage on the diffusion of hydrogen into the subsurface of cobalt was studied using density functional theory (DFT) and temperature programmed desorption (TPD). DFT calculations show that as the hydrogen coverage on Co(0001) increases, the barrier for hydrogen diffusion into the bulk decreases by 20%. Additionally, subsurface hydrogen on a hydrogen covered surface was found to be more stable when compared to a clean cobalt surface. To test these theoretical findings experimentally, excited hydrogen was used in an ultra-high vacuum environment to access higher hydrogen coverages. Here, our TPD studies showed that at high hydrogen coverages, a sharp low temperature feature appeared, indicating the stabilization of subsurface hydrogen. Further DFT calculations indicate that this sharp low temperature feature results from associative hydrogen desorption from a hydrogen saturated surface with a population of subsurface hydrogen. Microkinetic modelling was used to model the TPD spectra for hydrogen desporption from cobalt with and without subsurface hydrogen, showing reasonable agreement with experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Microscale mechanical modeling of deformable geomaterials with dynamic contacts based on the numerical manifold method

Abstract Micromechanical modeling of geomaterials is challenging because of the complex geometry of discontinuities and potentially large number of deformable material bodies that contact each other dynamically. In this study, we have developed a numerical approach for micromechanical analysis of deformable geomaterials with dynamic contacts. In our approach, we detect contacts among multiple blocks with arbitrary shapes, enforce different contact constraints for three different contact states of separated, bonded, and sliding, and iterate within each time step to ensure convergence of contact states. With these features, we are able to simulate the dynamic contact evolution at the microscale for realistic geomaterials having arbitrary shapes of grains and interfaces. We demonstrate the capability with several examples, including a rough fracture with different geometric surface asperity characteristics, settling of clay aggregates, compaction of a loosely packed sand, and failure of an intact marble sample. With our model, we are able to accurately analyze (1) large displacements and/or deformation, (2) the process of high stress accumulated at contact areas, (3) the failure of a mineral cemented rock samples under high stress, and (4) post-failure fragmentation. The analysis highlights the importance of accurately capturing (1) the sequential evolution of geomaterials responding to stress as motion, deformation, and high stress; (2) large geometric features outside the norms (such as large asperities and sharp corners) as such features can dominate the micromechanical behavior; and (3) different mechanical behavior between loosely packed and tightly packed granular systems.

58 GEOSCIENCES↗
DOE OSTI2024

First-order structural phase transition at low temperature in GaPt 5 P and its rapid enhancement with pressure

Single crystals of X Pt 5 ⁢P (X = Al, Ga, and In), belonging to the 1-5-1 family of compounds, were grown from a Pt-P solution at high temperatures, and measurements of the ambient pressure, temperature-dependent magnetization, resistivity, and x-ray diffraction were made. Additionally, the ambient-pressure Hall resistivity and temperature-dependent resistance under pressure were measured on GaPt 5 ⁢P. All three compounds have a tetragonal P4/mmm crystal structure at room temperature with metallic transport and weak diamagnetism over the 2–300 K temperature range. Surprisingly, at ambient pressure, both the transport and magnetization measurements on GaPt 5 ⁢P show a steplike feature in the 70–90 K region, suggesting a possible structural phase transition. Neither AlPt 5 ⁢P nor InPt 5 ⁢P have any signatures of a phase transition in their temperature-dependent electrical resistance and magnetization data. Both the hysteretic nature and sharpness of the features in the GaPt 5 ⁢P data suggest that the transition is first-order. Further, single-crystal x-ray diffraction measurements provided further details of the structural transition with a possibility of a crystal symmetry different from P⁢4/mmm below the transition temperature. The transition is characterized by anisotropic changes in the lattice parameters and a volume collapse with respect to the high-temperature tetragonal crystal structure. Furthermore, satellite peaks are observed at two distinct and nonequivalent wave vectors (0, 0, 0.5) and (0.5, 0.5, 0.5), and density functional theory calculations present phonon softening, especially at (0.5, 0.5, 0.5), as a possible driving mechanism. Additionally, we find that the structural transition temperature increases rapidly with increasing pressure, reaching room temperature by ~2.2 GPa, highlighting the high degree of pressure sensitivity of GaPt 5 ⁢P and fragile nature of its room-temperature structure. Even though the volume collapse and extreme pressure sensitivity suggest chemical pressure should drive a similar structural change in AlPt 5⁢ P, where both unit-cell dimensions and volume are smaller, its structure is found to be the same as that of the room-temperature GaPt 5 ⁢P. Overall, GaPt 5 ⁢P stands out as a sole member of the 1-5-1 family of compounds for which a temperature-driven structural change has been observed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Lines and boxes: Unmasking Dynamical Dark Matter through correlations in the MeV gamma-ray spectrum

Identifying signatures of dark matter at indirect-detection experiments is generally more challenging for scenarios involving non-minimal dark sectors such as Dynamical Dark Matter (DDM) than for scenarios involving a single dark particle. This additional difficulty arises because the partitioning of the total dark-matter abundance across an ensemble of different constituent particles with different masses tends to "smear" the injection spectra of photons and other cosmic-ray particles that are produced via dark-matter annihilation or decay. As a result, the imprints of the dark sector on these cosmic-ray flux spectra typically take the form of continuum features rather than sharp peaks or lines. In this paper, however, we identify an unambiguous signature of non-minimal dark sectors such as DDM which can overcome these issues and potentially be observed at gamma-ray telescopes operating in the MeV range. Finally, we discuss the specific situations in which this signature can arise, and demonstrate that this signature can be exploited in order to significantly enhance our ability to resolve the unique spectral features of DDM and other non-minimal dark sectors at future gamma-ray facilities.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Conversion between triplet pair states is controlled by molecular coupling in pentadithiophene thin films

In singlet fission (SF) the initially formed correlated triplet pair state, 1 (TT), may evolve toward independent triplet excitons or higher spin states of the (TT) species. The latter result is often considered undesirable from a light harvesting perspective but may be attractive for quantum information sciences (QIS) applications, as the final exciton pair can be spin-entangled and magnetically active with relatively long room temperature decoherence times. In this study we use ultrafast transient absorption (TA) and time-resolved electron paramagnetic resonance (TR-EPR) spectroscopy to monitor SF and triplet pair evolution in a series of alkyl silyl-functionalized pentadithiophene (PDT) thin films designed with systematically varying pairwise and long-range molecular interactions between PDT chromophores. The lifetime of the (TT) species varies from 40 ns to 1.5 μs, the latter of which is associated with extremely weak intermolecular coupling, sharp optical spectroscopic features, and complex TR-EPR spectra that are composed of a mixture of triplet and quintet-like features. On the other hand, more tightly coupled films produce broader transient optical spectra but simpler TR-EPR spectra consistent with significant population in 5 (TT) 0 . These distinctions are rationalized through the role of exciton diffusion and predictions of TT state mixing with low exchange coupling J versus pure spin substate population with larger J. The connection between population evolution using electronic and spin spectroscopies enables assignments that provide a more detailed picture of triplet pair evolution than previously presented and provides critical guidance for designing molecular QIS systems based on light-induced spin coherence.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Synergistic ground and orbital observations of iron oxides on Mt. Sharp and Vera Rubin ridge

Visible/short-wave infrared spectral data from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) show absorptions attributed to hematite at Vera Rubin ridge (VRR), a topographic feature on northwest Mt. Sharp. The goals of this study are to determine why absorptions caused by ferric iron are strongly visible from orbit at VRR, and to improve interpretation of CRISM data throughout lower Mt. Sharp. These goals are achieved by analyzing coordinated CRISM and in situ spectral data along the Curiosity Mars rover’s traverse. VRR bedrock within areas that have the deepest ferric absorptions in CRISM data also have the deepest ferric absorptions measured in situ. This suggests strong ferric absorptions are visible from orbit at VRR because of the unique spectral properties of VRR bedrock. Dust and mixing with basaltic sand additionally inhibit the ability to measure ferric absorptions in bedrock stratigraphically below VRR from orbit. There are two implications of these findings: (1) Ferric absorptions in CRISM data initially dismissed as noise could be real, and ferric phases are more widespread in lower Mt. Sharp than previously reported, (2) Patches with the deepest ferric absorptions in CRISM data are, like VRR, reflective of deeper absorptions in the bedrock. One model to explain this spectral variability is late-stage diagenetic fluids that changed the grain size of ferric phases, deepening absorptions. Curiosity’s experience highlights the strengths of using CRISM data for spectral absorptions and associated mineral detections, and the caveats in using these data for geologic interpretations and strategic path planning tools.

58 GEOSCIENCES↗
DOE OSTI2024

Use of carbonyldiimidazole as a derivatization agent for the detection of pinacolyl alcohol, a forensic marker for Soman, by EI-GC–MS and LC-HRMS in official OPCW proficiency test matrices

Pinacolyl alcohol (PA), a key forensic marker for the nerve agent Soman (GD), is a particularly difficult analyte to detect by various analytical methods. In this work, we have explored the reaction between PA and 1,1'-carbonyldiimidazole (CDI) to yield pinacolyl 1H-imidazole-1-carboxylate (PIC), a product that can be conveniently detected by gas chromatography–mass spectrometry (GC–MS) and liquid chromatography-high-resolution mass spectrometry (LC-HRMS). Regarding its GC–MS profile, this new carbamate derivative of PA possesses favorable chromatographic features such as a sharp peak and a longer retention time (RT = 16.62 min) relative to PA (broad peak and short retention time, RT = 4.1 min). Additionally, the derivative can also be detected by LC-HRMS, providing an avenue for the analysis of this chemical using this technique where PA is virtually undetectable unless present in large concentrations. From a forensic science standpoint, detection of this low molecular weight alcohol signals the past or latent presence of the nerve agent Soman (GD) in a given matrix (i.e., environmental or biological). The efficiency of the protocol was tested separately in the analysis and detection of PA by EI-GC–MS and LC-HRMS when present at a 10 μg/mL in a soil matrix featured in the 44th PT and in a glycerol-rich liquid matrix featured in the 48th Official Organization for the Prohibition of Chemical Weapons (OPCW) Proficiency Test when present at a 5 μg/mL concentration. In both scenarios, PA was successfully transformed into PIC, establishing the protocol as an additional tool for the analysis of this unnatural and unique nerve agent marker by GC–MS and LC-HRMS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Carbon Monoxide Mediated Hydrogen Release from PtCu Single-Atom Alloys: The Punctured Molecular Cork Effect

Pt-based materials are used extensively in heterogeneous catalytic processes, yet they are notoriously susceptible to poisoning by CO. In contrast, highly dilute binary alloys formed of isolated Pt atoms in a Cu metal host, known as PtCu single-atom alloys (SAAs), are more resilient to CO poisoning during catalytic hydrogenation reactions. In this article, we describe how CO affects the adsorption and desorption of H 2 from a model PtCu(111) SAA surface and gain a microscopic understanding of these species’ interaction at the Pt atom active sites. By combining temperature-programmed desorption and scanning tunneling microscopy with first-principles kinetic Monte Carlo, we identify CO as a Pt site blocker that prevents the low temperature adsorption and desorption of H 2 , the so-called molecular cork effect , first realized when examining PdCu SAAs. Intriguingly, for the case of PtCu, H 2 desorption occurs before CO release is detected. Additionally, desorption experiments show a nonlinear relationship between CO coverage of the Pt sites and H 2 desorption peak temperature. When all the Pt atoms are saturated by CO, a very sharp H 2 desorption feature is observed 55 K above the regular desorption temperature of H 2 . Our simulations reveal that the origin of these effects is the fact that desorption of just one CO molecule from a Pt site facilitates the fast release of many molecules of H 2 . In fact, just 0.7% of the CO adsorbed at Pt sites has desorbed when the H 2 desorption peak maximum is reached. The release of H 2 from CO-corked PtCu SAA surfaces is analogous to the escape of gas from a pressurized container with a small puncture. Given that small changes in CO surface coverage lead to large changes in H 2 evolution energetics, the punctured molecular cork effect must be considered when modeling reaction mechanisms on similar alloy systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Monolithic solid–electrolyte interphases formed in fluorinated orthoformate-based electrolytes minimize Li depletion and pulverization

Lithium (Li) pulverization and associated large volume expansion during cycling is one of the most critical barriers for the safe operation of Li-metal batteries. Here, we report an approach to minimize the Li pulverization using an electrolyte based on a fluorinated orthoformate solvent. The solid–electrolyte interphase (SEI) formed in this electrolyte clearly exhibits a monolithic feature, which is in sharp contrast with the widely reported mosaic- or multilayer-type SEIs that are not homogeneous and could lead to uneven Li stripping/plating and fast Li and electrolyte depletion over cycling. The highly homogeneous and amorphous SEI not only prevents dendritic Li formation, but also minimizes Li loss and volumetric expansion. Furthermore, this new electrolyte strongly suppresses the phase transformation of the LiNi 0.8 Co 0.1 Mn 0.1 O 2 cathode (from layered structure to rock salt) and stabilizes its structure. In conclusion, tests of high-voltage Li||NMC811 cells show long-term cycling stability and high rate capability, as well as reduced safety concerns.

25 ENERGY STORAGE↗
DOE OSTI2019

Modelling a Transition-Edge Sensor X-Ray Microcalorimeter Linear Array for Compton Profile Measurements and Energy Dispersive Diffraction

Transition-edge sensors (TES) are a type of superconducting detector that offers high energy resolution based on their sharp resistance-temperature feature in the superconducting-to-normal transition. TES X-ray microcalorimeters have typically been designed and used for spectroscopic applications. In this work, we present a design optimization for a TES X-ray microcalorimeter array for high-energy scattering and diffraction measurements. Specifically, Compton scattering provides information about the electron momentum distribution, while energy dispersive diffraction provides structural information about dense engineering materials. Compton scattering and energy dispersive diffraction experiments must be conducted in the very hard X-ray regime (~100 keV), demanding a high X-ray stopping power in the detector; therefore, an absorber with a large heat capacity is needed in conjunction with the TES. In addition, both applications would benefit from an array composed of parallel strips. We propose a design for a TES X-ray microcalorimeter optimized for such applications. In particular, we model the longitudinal position dependence due to the finite thermal diffusion time in the absorber.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Low-Level Mesoscale and Cloud-Scale Interactions Promoting Deep Convection Initiation

Data from scanning radars, radiosondes, and vertical profilers deployed during three field campaigns are analyzed to study interactions between cloud-scale updrafts associated with initiating deep moist convection and the surrounding environment. Three cases are analyzed in which the radar networks permitted dual-Doppler wind retrievals in clear air preceding and during the onset of surface precipitation. These observations capture the evolution of (i) the mesoscale and boundary layer flow, and (ii) low-level updrafts associated with deep moist convection initiation (CI) events yielding sustained or short-lived precipitating storms. The elimination of convective inhibition did not distinguish between sustained and unsustained CI events, though the vertical distribution of convective available potential energy may have played a role. The clearest signal differentiating the initiation of sustained versus unsustained precipitating deep convection was the depth of the low-level horizontal wind convergence associated with the mesoscale flow feature triggering CI, a sharp surface wind shift boundary, or orographic upslope flow. The depth of the boundary layer relative to the height of the LFC failed to be a consistent indicator of CI potential. Widths of the earliest detectable low-level updrafts associated with sustained precipitating deep convection were ~3–5 km, larger than updrafts associated with surrounding boundary layer turbulence (~1–3 km wide). It is hypothesized that updrafts of this larger size are important for initiating cells to survive the destructive effects of buoyancy dilution via entrainment.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

M-Edge Spectroscopy of Transition Metals: Principles, Advances, and Applications

M-edge X-ray absorption spectroscopy (XAS), which probes 3p→3d transitions in first-row transition metals, provides detailed insights into oxidation states, spin-states, and local electronic structure with high element and orbital specificity. Operating in the extreme ultraviolet (XUV) region, this technique provides sharp multiplet-resolved features with high sensitivity to ligand field and covalency effects. Compared to K- and L-edge XAS, M-edge spectra exhibit significantly narrower full widths at half maximum (typically 0.3–0.5 eV versus >1 eV at the L-edge and >1.5–2 eV at the K-edge), owing to longer 3p core-hole lifetimes. M-edge measurements are also more surface-sensitive due to the lower photon energy range, making them particularly well-suited for probing thin films, interfaces, and surface-bound species. The advent of tabletop high-harmonic generation (HHG) sources has enabled femtosecond time-resolved M-edge measurements, allowing direct observation of ultrafast photoinduced processes such as charge transfer and spin crossover dynamics. This review presents an overview of the fundamental principles, experimental advances, and current theoretical approaches for interpreting M-edge spectra. We further discuss a range of applications in catalysis, materials science, and coordination chemistry, highlighting the technique’s growing impact and potential for future studies.

M-edge XANES↗