Search NASA⌕ Search

SEARCH · Search NASA

Results for “shock timing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

The effect of a weak shock on interstellar gas toward the Rho Ophiuchi cloud

The effect of a low-velocity shock on depletion in interstellar clouds is studied. High-resolution Copernicus observations of interstellar absorption lines toward four stars in the Rho Ophiuchi cloud complex were used to measure differential depletion in interstellar clouds separated by velocities of 10-15 km/s. Optical observations of CH and CH(+) were used as indicators of shock strength and direction of propagation. Observations indicate the presence of a shock with velocity about 10 km/s expanding away from the sun into the Rho Oph cloud. The existence of this shock is supported by the other observations quoted in the literature. Two distinct regions in the lines of sight have been found. A low-density, less depleted, predominantly atomic region is associated with preshock gas, while postshock gas accounts for a predominantly molecular, more highly depleted region. Apparently a weak shock, has the effect of enhancing grain formation or grain growth as a result of increased density in the postshock gas. It is possible for grain growth by accretion to occur in the shocked gas on time scales short compared with the cloud-crossing time of the shock.

Meyers, K. A.↗
NASA NTRS1991

Development of a shock noise prediction code for high-speed helicopters - The subsonically moving shock

A previously defined airfoil subsonic shock-noise prediction formula whose result depends on a mapping of the time-dependent shock surface to a time-independent computational domain is presently coded and incorporated in the NASA-Langley rotor-noise prediction code, WOPWOP. The structure and algorithms used in the shock-noise prediction code are presented; special care has been taken to reduce computation time while maintaining accuracy. Numerical examples of shock-noise prediction are presented for hover and forward flight. It is confirmed that shock noise is an important component of the quadrupole source.

Tadghighi, H.↗
NASA NTRS1993

Time-sequenced and spectrally filtered Rayleigh imaging of shock wave and boundary layer structure for inlet characterization

Multiple pulsed Rayleigh imaging and filtered Rayleigh scattering are used to generate images of a complex boundary layer structure, shock wave/boundary layer interactions, and crossing shock waves. Time-sequenced Rayleigh images taken with a visible, double-pulsed laser system show the evolution of boundary layer structure of the internal flow in a generic cross-shock inlet. The images taken in the inlet give insight into 3D effects caused by the inlet geometry and may be used for modeling the complex flows.

Forkey, Joseph↗
NASA NTRS1987

Optimal shock isolation with minimum settling time

It is shown how unique isolator forces and corresponding forces can be chosen by superimposing a minimum settling time onto the limiting performance of the shock isolation system. Basically, this means that the system which has reached the peak value of the performance index is settled to rest in minimum time.

Pilkey, W. D.↗
NASA NTRS1975

Mechanism of ignition in shock wave interactions with reactive liquid droplets

A detailed qualitative analysis of the processes leading to the explosive ignition of a reactive liquid droplet that is suspended in a gas-phase oxidizer and subjected to the passage of a shock wave, is presented. The interval of time between shock wave passage and ignition is described by identifying a two-stage process which consists of a period of relative reactive dormancy that is followed by a chemical induction period leading to the thermal explosion of reactant that has been stripped from the liquid drop, vaporized, and mixed with the gas-phase oxidizer. The results of first-order calculations based on this model are presented and compared with experimental data for diethlcyclohexane drops in oxygen.

Pierce, T. H.↗
NASA NTRS2016

The Radial Speed-Expansion Speed Relation for Earth-Directed CMEs

Earth-directed coronal mass ejections (CMEs) are the main drivers of major geomagnetic storms. Therefore, a good estimate of the disturbance arrival time at Earth is required for space weather predictions. The STEREO and SOHO spacecraft were viewing the Sun in near quadrature during January 2010 to September 2012, providing a unique opportunity to study the radial speed (V (sub rad)) to expansion speed(V (sub exp)) relationship of Earth-directed CMEs. This relationship is useful in estimating the V (sub rad) of Earth-directed CMEs, when they are observed from Earth view only. We selected 19 Earth-directed CMEs observed by the Large Angle and Spectrometric Coronagraph (LASCO)/C3 coronagraph on SOHO and the Sun Earth Connection Coronal and Heliospheric Investigation (SECCHI)/COR2 coronagraph on STEREO during January 2010 to September 2012. We found that of the three tested geometric CME models the full ice-cream cone model of the CME describes best the V (sub rad) to V (sub exp) relationship, as suggested by earlier investigations. We also tested the prediction accuracy of the empirical shock arrival (ESA) model proposed by Gopalswamy et al.(2005a), while estimating the CME propagation speeds from the CME expansion speeds. If we use STEREO observations to estimate the CME width required to calculate the V (sub rad) from the V (sub exp) measurements, the mean absolute error (MAE) of the shock arrival times of the ESA model is 8.4 hours. If the LASCO measurements are used to estimate the CME width, the MAE still remains below 17 hours. Therefore, by using the simple V (sub rad) to V (sub exp) relationship to estimate the V (sub rad) of the Earth-directed CMEs, the ESA model is able to predict the shock arrival times with accuracy comparable to most other more complex models.

Makela, P.↗
NASA NTRS1986

Methane oxidation behind reflected shock waves: Ignition delay times measured by pressure and flame band emission

Ignition delay data were recorded for three methane-oxygen-argon mixtures (phi = 0.5, 1.0, 2.0) for the temperature range 1500 to 1920 K. Quiet pressure trances enabled us to obtain delay times for the start of the experimental pressure rise. These times were in good agreement with those obtained from the flame band emission at 3700 A. The data correlated well with the oxygen and methane dependence of Lifshitz, but showed a much stronger temperature dependence (phi = 0.5 delta E = 51.9, phi = 1.0 delta = 58.8, phi = 2.0 delta E = 58.7 Kcal). The effect of probe location on the delay time measurement was studied. It appears that the probe located 83 mm from the reflecting surface measured delay times which may not be related to the initial temperature and pressure. It was estimated that for a probe located 7 mm from the reflecting surface, the measured delay time would be about 10 microseconds too short, and it was suggested that delay times less than 100 microsecond should not be used. The ignition period was defined as the time interval between start of the experimental pressure rise and 50 percent of the ignition pressure. This time interval was measured for three gas mixtures and found to be similar (40 to 60 micro sec) for phi = 1.0 and 0.5 but much longer (100 to 120) microsecond for phi = 2.0. It was suggested that the ignition period would be very useful to the kinetic modeler in judging the agreement between experimental and calculated delay times.

Brabbs, T. A.↗
NASA NTRS2019

Computational Modeling for Non-equilibrium Shock Tube Flows

Time accurate simulation of non-equilibrium flows inside shock tube facilities presents several challenges from both physical and mathematical aspects. Furthermore, the drastic computational cost makes it non-practical to support real-time experimental test campaign. In this work, we explore other methods for modeling the shock tube prob- lem with the main focus on the post-shock region and the absolute radiation emanating from it. The proposed alternative approach is several orders of magnitude less computa- tionally expansive while still accurate enough with regards to the quantities of interest. Excellent agreement is found with the well-established stagnation-line approach. Comparison with the time-accurate simulation shows good agreement close to the peak values and disagreement of the temperatures relaxation and radiance profiles toward equilibrium, due to shock speed unsteadiness.

Bensassi, Khalil↗
NASA NTRS2019

Computational Modeling for Non-Equilibrium Shock Tube Flows

Time accurate simulation of non-equilibrium flows inside shock tube facilities presents several challenges from both physical and mathematical aspects. Furthermore, the large computational cost makes it impractical to support a real-time experimental test campaign. In this work, we explore other methods for modeling the shock tube problem with the main focus on the post-shock region and the absolute radiation emanating from it. The proposed alternative approach is several orders of magnitude less computationally expensive while still accurate enough with regards to the quantities of interest. Excellent agreement is found with the established stagnation-line approach. Comparison with time-accurate simulations shows good agreement close to the peak values and disagreement of the temperatures relaxation and radiance profiles toward equilibrium.

Bensassi, Khalil↗
NASA NTRS1999

Accuracy Study of the Space-Time CE/SE Method for Computational Aeroacoustics Problems Involving Shock Waves

The space-time conservation element and solution element(CE/SE) method is used to study the sound-shock interaction problem. The order of accuracy of numerical schemes is investigated. The linear model problem.govemed by the 1-D scalar convection equation, sound-shock interaction problem governed by the 1-D Euler equations, and the 1-D shock-tube problem which involves moving shock waves and contact surfaces are solved to investigate the order of accuracy of numerical schemes. It is concluded that the accuracy of the CE/SE numerical scheme with designed 2nd-order accuracy becomes 1st order when a moving shock wave exists. However, the absolute error in the CE/SE solution downstream of the shock wave is on the same order as that obtained using a fourth-order accurate essentially nonoscillatory (ENO) scheme. No special techniques are used for either high-frequency low-amplitude waves or shock waves.

Wang, Xiao Yen↗
NASA NTRS1991

Exact and approximate solutions to the oblique shock equations for real-time applications

The derivation of exact solutions for determining the characteristics of an oblique shock wave in a supersonic flow is investigated. Specifically, an explicit expression for the oblique shock angle in terms of the free stream Mach number, the centerbody deflection angle, and the ratio of the specific heats, is derived. A simpler approximate solution is obtained and compared to the exact solution. The primary objectives of obtaining these solutions is to provide a fast algorithm that can run in a real time environment.

Hartley, T. T.↗
NASA NTRS1975

Acceleration of charged particles in oblique MHD shocks

The motion of high energy charged particles in ideal oblique MHD shocks has been studied extensively. The orbits of charged particles can be solved exactly from Lorentz force equation. It is found that a charged particle may cross the shock front many times before it leaves the shock and it is energized during crossings. The most energetic particles are those with initial pitch and phase near the boundary between crossing and reflected particles. The reflected particles cross the shock about twice as many times as the passing particles do. The energy gain increases for larger values of shock strength and speed. If reflection occurs, the energy gain is larger for smaller angles between the field and shock surface. The introduction of scattering results in a few more higher energy particles.

Chen, G.↗
NASA NTRS1999

Ionospheric response to the CME Passage of September 24,1998

On September 24, 1998, a solar coronal mass ejection struck the Earth's magnetosphere. The magnetosphere/ionosphere system exhibited a response in several ways one of which was an increase in ion outflow from the ionosphere, ionospheric mass ejections in response to the pressure pulse from the shock passage at the front of the magnetosphere. However, the timing of the incidence of the pressure pulse and the ionospheric response has not been examined in detail. Images from the Ultraviolet Imager show a brightening in the dayside aurora at the same time the shock is seen at Polar at about 23:45 UT on the 24th. . We examine the temporal and spatial relationship (using simple models ) of these two events to determine the correlation of the particles seen at Polar and the regions of increased energy input seen in the aurora and discuss the physical implications of the results.

Craven, Paul D↗
NASA NTRS1988

ISEE-3 observations of the earth's radio continuum through the bow shock and magnetosheath and in the magnetosphere

On October 1 1983, ISEE-3 crossed the earth's bow shock several times and entered the magnetosphere while continuously recording the nonthermal continuum (NTC) radio emission which is generated inside the magnetosphere. The effects of the solar wind, the bow shock, the magnetosheath, and the magnetopause on the propagation of the NTC are studied. On that day it is found that: (1) the relative values of the NTC low frequency cut-off in the solar wind and in the magnetosheath is due to an unusually high density overshoot in the bow shock, 7 to 11 times the solar wind density; (2) refraction at the interface between the magnetosheath and the solar wind can explain most of the decrease in the source angular size when the observer travels away from the earth; (3) plasma density irregularities in the magnetosheath cause considerable scattering of the NTC, and this effect gives a large apparent size to the NTC source when observed from inside the magnetosheath; and (4) the apparent source is also relatively large inside the magnetosphere, probably due to an approach to ray isotropy caused by oblique reflections from the magnetopause.

Steinberg, J.-L.↗