Search NASA⌕ Search

SEARCH · Search NASA

Results for “shocks”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Temporally and spatially resolved X-ray densitometry in a shock tube

Gas densities were measured by x-ray absorption spectroscopy to examine spatial inhomogeneity in density behind incident and reflected shock waves in a miniature (12.7 mm bore) high repetition rate shock tube. Shock waves were generated in argon. The pressure and temperature behind the incident shock were P 2 ~ 1.72 bar and T 2 ~ 800 K, while those behind the reflected shock were P 5 ~ 6.5 bar and T 5 ~ 1480 K. Time-resolved line-of-sight transmission measurements using x-rays at 9 keV photon energy were made along various axial and transverse locations covering the entire shock tube cross section. The x-ray transmission at each location was converted to pathlength-integrated densities, which in some conditions could be further converted to pathlength-averaged densities. The measured gas densities were compared with those calculated by the normal shock wave relations, and good agreement was found in the preshock and immediately behind the incident shock regions. Similar agreement was found for reflected shock conditions very near the endwall. However, increasingly large differences between the measured and calculated gas densities were found as distance from the endwall increased. Furthermore, reconstruction by Abel inversion allowed time and radially resolved densities to be obtained from the transverse measurements. While the profiles measured in this experiment are of insufficient signal-to noise level and resolution to definitively assign boundary layer thicknesses, future improvements may be able to do this. The radially resolved densities reveal growing sidewall thermal boundary layers in gases behind the reflected shock. These reconstructions were compared with a model of the thermal boundary layer and are consistent with values of the thermal boundary layer thickness being between 0.25 mm and 1 mm at 0.7 ms after shock reflection.

42 ENGINEERING↗
DOE OSTI2023

Mesoscale shock structure in particulate composites

Multiscale experiments in heterogeneous materials and the knowledge of their physics under shock compression are limited. Here, this study examines the multiscale shock response of particulate composites comprised of soda-lime glass particles in a PMMA matrix using full-field high speed digital image correlation (DIC) for the first time. Normal plate impact experiments, and complementary numerical simulations, are conducted at stresses ranging from 1.1 - 3.1 GPa to elucidate the mesoscale mechanisms responsible for the distinct shock structure observed in particulate composites. The particle velocity from the macroscopic measurement at continuum scale shows a relatively smooth velocity profile, with shock thickness decreasing with an increase in shock stress, and the composite exhibits strain rate scaling as the second power of the shock stress. In contrast, the mesoscopic response was highly heterogeneous, which led to a rough shock front and the formation of a train of weak shocks traveling at different velocities. Additionally, the normal shock was seen to diffuse the momentum in the transverse direction, affecting the shock rise and the rounding-off observed at the continuum scale measurements. The numerical simulations indicate that the reflections at the interfaces, wave scattering, and interference of these reflected waves are the primary mechanisms for the observed rough shock fronts.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Electron acceleration in laboratory-produced turbulent collisionless shocks

Astrophysical collisionless shocks are among the most powerful particle accelerators in the Universe. Generated by violent interactions of supersonic plasma flows with the interstellar medium, supernova remnant shocks are observed to amplify magnetic fields and accelerate electrons and protons to highly relativistic speeds. In the well-established model of diffusive shock acceleration, relativistic particles are accelerated by repeated shock crossings. However, this requires a separate mechanism that pre-accelerates particles to enable shock crossing. This is known as the ‘injection problem’, which is particularly relevant for electrons, and remains one of the most important puzzles in shock acceleration. In most astrophysical shocks, the details of the shock structure cannot be directly resolved, making it challenging to identify the injection mechanism. In this letter we report results from laser-driven plasma flow experiments, and related simulations, that probe the formation of turbulent collisionless shocks in conditions relevant to young supernova remnants. We show that electrons can be effectively accelerated in a first-order Fermi process by small-scale turbulence produced within the shock transition to relativistic non-thermal energies, helping overcome the injection problem. Our observations provide new insight into electron injection at shocks and open the way for controlled laboratory studies of the physics underlying cosmic accelerators.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Evidence of non-isentropic release from high residual temperatures in shocked metals measured with ultrafast x-ray diffraction

Shock experiments are widely used to understand the mechanical and electronic properties of matter under extreme conditions. However, after shock loading to a Hugoniot state, a clear description of the post-shock thermal state and its impacts on materials is still lacking. We used diffraction patterns from 100-fs x-ray pulses to investigate the temperature evolution of laser-shocked Al–Zr metal film composites at time delays ranging from 5 to 75 ns driven by a 120-ps short-pulse laser. We found significant heating of both Al and Zr after shock release, which can be attributed to heat generated by inelastic deformation. A conventional hydrodynamic model that employs (i) typical descriptions of Al and Zr mechanical strength and (ii) elevated strength responses (which might be attributed to an unknown strain rate dependence) did not fully account for the measured temperature increase, which suggests that other strength-related mechanisms (such as fine-scale void growth) could play an important role in thermal responses under shock wave loading/unloading cycles. Our results suggest that a significant portion of the total shock energy delivered by lasers becomes heat due to defect-facilitated plastic work, leaving less converted to kinetic energy. This heating effect may be common in laser-shocked experiments but has not been well acknowledged. High post-shock temperatures may induce phase transformation of materials during shock release. Another implication for the study is the preservability of magnetic records from planetary surfaces that have a shock history from frequent impact events.

42 ENGINEERING↗
DOE OSTI2024

Weak shock compaction on granular salt

This study conducted integrated experiments and computational modeling to investigate the speeds of a developing shock within granular salt and analyzed the effect of various impact velocities up to 245 m/s. Experiments were conducted on table salt utilizing a novel setup with a considerable bore length for the sample, enabling visualization of a moving shock wave. Experimental analysis using particle image velocimetry enabled the characterization of shock velocity and particle velocity histories. Mesoscale simulations further enabled advanced analysis of the shock wave’s substructure. In simulations, the shock front’s precursor was shown to have a heterogeneous nature, which is usually modeled as uniform in continuum analyses. The presence of force chains results in a spread out of the shock precursor over a greater ramp distance. With increasing impact velocity, the shock front thickness reduces, and the precursor of the shock front becomes less heterogeneous. Furthermore, mesoscale modeling suggests the formation of force chains behind the shock front, even under the conditions of weak shock. This study presents novel mesoscale simulation results on salt corroborated with data from experiments, thereby characterizing the compaction front speeds in the weak shock regime.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Shock Response of Polymethyl Methacrylate (PMMA) Under Explosive Loading

Abstract The dynamic response of polymethyl methacrylate (PMMA) is well understood for one-dimensional planar impact shocks, but limited research has been performed on the response of PMMA under spherical shock loading. In this work, the shock decay of an explosively-driven shock wave into PMMA was experimentally measured. PMMA cubes of various geometries were explosively loaded with an RP-80 detonator to produce the explosive shock wave. High-speed schlieren imaging was implemented to measure the explosively-driven shock wave velocity throughout the PMMA cubes. Photon Doppler velocimetry (PDV) was used to measure the particle velocity imparted by the shock wave at the surface of the cubes. The material shock response was studied at distances from 21.91 to 133.3 mm from the explosive source. The particle velocity history measured by PDV was compared to the wave profile visualized in the high-speed images. The shock wave pulse amplitude decreased with increased distance from the source. The conducted experiments extend the PMMA shock Hugoniot relating to the lower shock and particle velocity regime.

Torres, S. M. (ORCID:0009000287177206)↗
DOE OSTI2026

Efficacy of Gadolinium Gallium Garnet (GGG) as a High-Impedance Optical Window for Shock Wave Experiments

We conducted a series of plate impact experiments to examine the efficacy of < 111>-oriented gadolinium gallium garnet (GGG) single crystals as high-impedance optical window for Photonic Doppler velocimetry (PDV) under shock and double-shock loading. At ~ 123 GPa, shocked GGG remains fully transparent to 1550 nm light for at least 250 ns without any signal degradation. Above 135 GPa, PDV data measured through GGG exhibit a gradual loss of fringe contrast following shock entrance, which eventually leads to transparency loss. The duration for which shocked GGG remains transparent decreases with increasing pressure, and at ~ 148 GPa, it becomes opaque within ~ 20–30 ns. This limits the use of GGG as an interferometry window between ~ 110–140 GPa under single shock loading. Within this pressure range, the refractive index of GGG increases linearly with density: n = 1.552 + 0.054ρ. In contrast to single shock loading, where GGG becomes opaque rapidly above ~ 140 GPa, double-shocked GGG remains optically transparent for over 100 ns when it is first shocked to ~ 123 GPa and then reshocked to significantly higher pressures (215–233 GPa). Our findings raise the exciting possibility of GGG being used as a high-impedance optical window in multi-shock and shock-ramp loading experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

The influence of the shock-to-reshock time on the Richtmyer–Meshkov instability in reshock

Experiments on the Richtmyer–Meshkov instability (RMI) in a dual driver vertical shock tube (DDVST) are described. An initially planar, stably stratified membraneless interface is formed by flowing air from above and sulfur hexafluoride from below the interface location using the method of Jones & Jacobs ( Phys. Fluids , vol. 9, issue 1997, 1997, pp. 3078–3085). A random three-dimensional, multi-modal initial perturbation is imposed by vertically oscillating the gas column to produce Faraday waves. The DDVST design generates two shock waves, one originating above and one below the interface, with these shocks having independently controllable strengths and interface arrival times. The shock waves have nominal strengths of $M_L=1.17$ and $M_H=1.18$ for the shock wave originating in the light and heavy gas, respectively, with these strengths chosen to result in arrested bulk interface motion following reshock. The influence of the length of the shock-to-reshock time, as well as the order of shock arrival, on the post-reshock RMI is examined. The mixing layer width grows according to $h\propto t^\theta$ , where $\theta _H=0.36\pm 0.018$ (95 %) and $\theta _L=0.38\pm 0.02$ (95 %) for heavy and light shock first experiments, respectively, indicating no strong dependence on the order of shock wave arrival. Volume integrated specific turbulent kinetic energy (TKE) in the mixing layer versus time is found to decay according to $E_{tot}/\bar {\rho }\propto t^p$ with $p_H=-0.823\pm 0.06$ (95 %) and $p_L=-1.061\pm 0.032$ (95 %) for heavy and light shock first experiments, respectively. Notably, the 95 % confidence intervals do not overlap. Analysis on the influence of the shock-to-reshock time on turbulent length scales, transition criteria, spectra and mixing layer anisotropy are also presented.

Ferguson, Kevin (ORCID:0000000166537482)↗
DOE OSTI2024

Shock equation of state experiments in MgO up to 1.5 TPa and the effects of optical depth on temperature determination

Laser-driven shock compression enables an experimental study of phase transitions at unprecedented pressures and temperatures. One example is the shock Hugoniot of magnesium oxide (MgO), which crosses the B1–B2-liquid triple point at 400–600 GPa, 10 000–13 000 K (0.86–1.12 eV). MgO is a major component within the mantles of terrestrial planets and has long been a focus of high-pressure research. Here, we combine time-resolved velocimetry and pyrometry measurements with a decaying shock platform to obtain pressure–temperature data on MgO from 300 to 1500 GPa and 9000 to 50 000 K. Pressure–temperature–density Hugoniot data are reported at 1500 GPa. These data represent the near-instantaneous response of an MgO [100] single crystal to shock compression. We report on a prominent temperature anomaly between 400 and 460 GPa, in general agreement with previous shock studies, and draw comparison with equation-of-state models. We provide a detailed analysis of the decaying shock compression platform, including a treatment of a pressure-dependent optical depth near the shock front. We show that if the optical depth of the shocked material is larger than 1 μm, treating the shock front as an optically thick gray body will lead to a noticeable overestimation of the shock temperature.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Shock compression behavior of stainless steel 316L octet-truss lattice structures

Lattice structures offer desirable mechanical properties for applications of energy absorption and impact mitigation but limited research has been carried out on their shock compression behavior. In this work, the shock compression behavior of stainless steel 316L (SS316L) octet-truss lattice structures was investigated through experimental techniques and numerical simulations. Plate impact experiments with high-speed imaging were conducted at impact velocities of 270 – 390 m/s on lattice specimens with 5x5x10 unit cell geometries additively manufactured (AM) using direct metal laser sintering. High-speed imaging together with digital image correlation was used to extract full-field measurements and define a two-wave structure consisting of an elastic wave and planar compaction (shock) wave which propagated along the impact direction. A linear shock velocity versus particle velocity relation was found to approximate the measurements with a unit slope and a linear fit constant equal to the crushing speed. Furthermore, the shock velocity versus particle velocity relation, full-field measurements, and elastic limit together with the Eulerian form of the Rankine-Hugoniot jump conditions were used to find relations for the stress and internal energy behind the shock. Stress behind the shock increased with relative density and particle velocity, and specific internal energy converged to a single curve similar to that of bulk AM SS316L. Explicit finite element analysis using the Johnson-Cook constitutive model demonstrated similar shock behavior observed in experiments and a linear shock velocity versus particle velocity relation and corresponding Hugoniot calculations were found to be in agreement with experimental results. Numerical simulations confirmed negligible effects of exterior versus interior measurements and further validated the application of one-dimensional shock theory.

42 ENGINEERING↗
DOE OSTI2025

Amplification of turbulence through multiple planar shocks

We study the amplification of isotropic, incompressible turbulence through multiple planar, collisional shocks, using analytical linear theory. There are two limiting cases we explore. The first assumes shocks occur rapidly in time such that the turbulence does not evolve between shocks. Whereas the second case allows enough time for turbulence to isotropize between each shock. For the latter case, through a quasi-equation-of-state, we show that the weak multishock limit is agnostic to the distinction between thermal and vortical turbulent pressures, like an isotropic volumetric compression. When turbulence does not return to isotropy between shocks, the generated anisotropy—itself a function of shock strength—can feedback on amplification by further shocks, altering choices for maximal or minimal amplification. In addition for this case, we find that amplification is sensitive to the shock ordering. As a result, we map how choices of shock strength can impact these amplification differences due to ordering, finding, for example, shock pairs which lead to identical mean postshock fields (density, temperature, pressure) but maximally distinct turbulent amplification.

Astrophysical fluid dynamics↗
DOE OSTI2021

Shock Propagation and Associated Particle Acceleration in the Presence of Ambient Solar-Wind Turbulence

The topic of this review paper is on the influence of solar wind turbulence on shock propagation and its consequence on the acceleration and transport of energetic particles at shocks. As the interplanetary shocks sweep through the turbulent solar wind, the shock surfaces fluctuate and ripple in a range of different scales. We discuss particle acceleration at rippled shocks in the presence of ambient solar-wind turbulence. This strongly affects particle acceleration and transport of energetic particles (both ions and electrons) at shock fronts. In particular, we point out that the effects of upstream turbulence is critical for understanding the variability of energetic particles at shocks. Moreover, the presence of pre-existing upstream turbulence significantly enhances the trapping near the shock of low-energy charged particles, including those near the thermal energy of the incident plasma, even when the shock propagates normal to the average magnetic field. Pre-existing turbulence, always present in space plasmas, provides a means for the efficient acceleration of low-energy particles and overcoming the well known injection problem at shocks.

, solar wind↗
DOE OSTI2025

Planar Collisionless Shock Simulations with the Semi-implicit Particle-in-cell Model FLEKS

This study investigates the applicability of the semi-implicit particle-in-cell code FLexible Exascale Kinetic Simulator (FLEKS) to heliospheric shock simulations. We examine one- and two-dimensional local planar shock simulations, initialized using MHD states with upstream conditions representative of plasmas in the hypersonic, β ∼ 1 regime, for both quasi-perpendicular and quasi-parallel configurations. The refined algorithm in FLEKS proves robust, enabling accurate shock simulations with a grid resolution on the order of the electron inertial length d e . Our simulations successfully capture key shock features, including shock structures (foot, ramp, overshoot, and undershoot), upstream and downstream waves (fast magnetosonic, whistler, Alfvén ion-cyclotron, and mirror modes), and non-Maxwellian particle distributions. Crucially, we find that at least two spatial dimensions are critical for accurately reproducing downstream-wave physics in quasi-perpendicular shocks and capturing the complex dynamics of quasi-parallel shocks, including surface rippling, shocklets, short, large-amplitude magnetic structures, magnetic reconnection, and jets. Furthermore, our parameter studies demonstrate the impact of mass ratio and grid resolution on shock physics. This work provides valuable guidance for selecting appropriate physical and numerical parameters for shock simulations using a semi-implicit PIC method, paving the way for incorporating kinetic shock processes into large-scale collisionless plasma simulations with the MHD-AEPIC model.

plasma astrophysics↗
DOE OSTI2022

Comparing the shock sensitivity of insensitive energetic materials

We present a tabletop method to study the shock sensitivity of plastic-bonded explosives that are considered shock insensitive using high dynamic range optical emission spectroscopy with laser-launched km/s flyer plate impacts (2, 3, and 4 km/s), which measures the spectral radiance (the emission spectrum vs a calibrated intensity standard) every 0.8 ns in the nanosecond and microsecond regimes. The explosives were TATB (1,3,5 trinitro, 2,4,6 triamino benzene), FOX-7 (1,1-diamino-2,2-dinitroethylene), LLM-105 (2,6-diamino-3,5-dinitropyrazine-1-oxide), and NTO (nitrotriazolone), all with 20% Sylgard 182 binder. Time resolving emission from shocked explosives produces a unique fingerprint at each shock pressure, and the emission temporal profile can be used to understand each material's shock response and the underlying mechanisms within the framework of the well-known shock ignition and growth models. Ignition was characterized by the emission intensity during nanosecond hot spot ignition. The growth process, which occurs after the shock has unloaded, was characterized by the time derivative of microsecond emission intensity. Singular-value decomposition was used to determine a characteristic spectral radiance over the entire time range, and this radiance was fit to a graybody model to determine a characteristic temperature Tc. Even though these insensitive explosives have similar shock sensitivities, our method can clearly distinguish their shock response. FOX-7 and NTO were the most sensitive, with FOX-7 having the greatest shock ignition sensitivity, growth rate, and Tc. LLM-105 was much less sensitive than FOX-7 and NTO, and TATB consistently showed the lowest sensitivity by any measure.

Akhtar, Meysam (ORCID:0000000243897837)↗
DOE OSTI2025

Symmetry Determining Equations of the Rankine-Hugoniot Equations for Variable Velocity Shock Waves

The “constant velocity piston” problem (Fig. 1), also known as the “piston problem,” is a standard model for a one dimensional, in our case linear, symmetric shock wave moving through an inviscid, perfect gas. The model can be divided into two regions - a perturbed section on the left and an unperturbed section on the right - by a moving shock wave moving left to right. Both the perturbed and unperturbed sections, i.e. the shocked and unshocked regions, respectively, obey the Eulerian conservation equations; however, at the exact location of the shock, there is a mathematical discontinuity not satisfied by the Euler equations. To ensure continuity and conservation of certain quantities when crossing between the unshocked and shocked regions, we evoke a series of equations derived from the Eulerian conservation equations, called the Rankine-Hugoniot equations, or “jump” equations as it is often referred to in the literature on the topic. The classical constant-velocity piston problem assumes the piston features a constant driving velocity (among many other willing suspensions of belief required in the pursuit of a first principles equation model); consequent to this assumption is a constant-velocity shock and a constant-velocity shocked flow state. However, using Lie Group Theory (LGT), also known as symmetry analysis, we can attempt to reinterpret the model with a shock wave of variable velocity in time and space. An extension of the model in this way opens up the possibility for obtaining new analytical solutions to the piston problem for certain shock velocity models. In this report, we use LGT to derive the symmetry determining equations (SDEs), whose solutions are Lie groups, which permit analytical solutions. In the future, we can then use the SDEs to define constraint equations on the shock velocity model and what the successive solutions to the Euler equations might be based off such constraints. This report is structured as follows: Section 2 provides a brief derivation of the Rankine-Hugoniot (“jump”) equations; Section 3 gives an overview of Lie group theory; Section 4 derives the SDEs of the jump equations; Section 5 derives the Euler conservation equations for fluids; and Section 6 presents concluding remarks and opportunities for future studies.

42 ENGINEERING↗
DOE OSTI2024

Kinetic simulations comparing quasi-parallel and quasi-perpendicular piston-driven collisionless shock dynamics in magnetized laboratory plasmas

Magnetized collisionless shocks are common in astrophysical systems, and scaled versions can be created in laboratory experiments by utilizing laser-driven piston plasmas to create these shocks in a magnetized background plasma. A key parameter for these experiments is the angle θB between the shock propagation direction and the background magnetic field. We performed quasi-1D piston-driven shock simulations to explore shock formation, evolution, and key observables relevant to laboratory experiments for a range of shock angles between θB=90° to θB=30°. Our results show that the spatial and temporal scales of shock formation for all angles considered are similar when expressed in terms of the perpendicular component of the magnetic field. In a steady state, ion and electron temperatures become more isotropic, and the electron-to-ion temperature ratio is higher for smaller θB. At θB=30°, ion heating parallel to the magnetic field becomes dominant, associated with more ions being reflected at one discontinuity and subsequently trapped by the next discontinuity due to shock reformation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A block-spectral adaptive H-/$p$-refinement strategy for shock-dominated problems

An adaptive H-/p-refinement strategy using a novel sensor is devised and tested in a block-spectral compressible Euler code equipped with adaptive-mesh refinement (AMR) and high-order flux-reconstruction numerics. At each Gauss quadrature point (or solution point) within each spectral block (or mesh element) the discrete velocity jump ΔU = ∂U/∂y 1 Δy 1 + ∂V/∂y 2 Δy 2 + ∂W/∂y 3 Δy 3 is calculated and normalized by the local speed of sound, a. Here, the grid spacing, Δx i , is calculated in each direction as the distance between auxiliary Gauss-Lobatto points, staggered relative to the solution points. The polynomial order is increased from p = 0 to p = p max in regions of weak compression, (ΔU/a) crit < ΔU/a < 0 and kept at p = p max in regions of flow expansion ΔU/a ≥ 0, while staying at the H = 0 base mesh level. Regions experiencing strong compressions, i.e. ΔU/a < (ΔU/a) crit , are H-refined up to H = H max where H max is applied at the location of maximum compression, ΔU/a = min(ΔU/a) in the domain, while keeping p = 0 to guarantee robustness and monotonicity of the solution in the H refined region. The critical value of (ΔU/a) crit = -0.06 is found to effectively separate smooth and non-smooth solution regions, supported by a 1D detonation initiation test case in ideal gas and a shock-to-detonation transition in high explosives. Using this value, the Sod shock tube, Shu-Osher problem, double Mach reflection and a 2D detonation in a high-explosive are simulated with the proposed adaptive H-/p-refinement. In the Sod shock tube case, p-refinement resolves the (weak) contact discontinuity while H-refinement enhances the grid resolution in the shock exploiting the monotonicity of the p = 0 reconstruction. For the Shu-Osher problem, p-refinement captures the small-scale oscillations trailing the shock that would be otherwise attenuated, while H-refinement triggered by the ΔU-sensor appropriately tracks the shock. In the double Mach reflection problem, H-refinement confines the numerical diffusion around the reflected shock while p-refinement recaptures many physical features trailing the shock. Finally, in the 2D high-explosive detonation case, H-refinement follows the leading shock and resolves the curvature of the detonation wave, while p-refinement adds resolution to the trailing reaction zone. Finally, the proposed methodology is tested in a detonation-wave propagation test case in high-explosives with numerical predictions comparing favorably against experiments.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Evaluation of the relative importance of preheat from hohlraum x rays and a radiative shock on a low-density foam

Indirectly driven shock-tube experiments were performed on the Omega Laser Facility to evaluate the relative importance of hohlraum x ray and radiative shock preheat sources on a low-density foam. X rays emitted from the hohlraum and a subsequent shock wave are channeled into a low-density foam sample, which contains a plastic preheat-witness disk placed downstream of the foam. Simultaneous radiographic measurements of the shock speed in the foam and the expansion rate of the witness disk due to preheat allow for the observation of effects from the hohlraum's low-energy and high-energy x-ray spectrum. Here we showed, from simulations, that low-energy x rays from the hohlraum are preferentially absorbed near the ablator surface (where the hohlraum and the shock tube meet), while higher-energy x rays largely pass through the ablator and foam and are volumetrically absorbed by the witness disk. Reproducing the experimentally measured shock speed and expansion of the witness disk simultaneously, we extracted the temperature evolution of preheated foam from the simulation and evaluated the relative importance of preheat sources on a low-density foam from hohlraum x-ray radiation and radiative shock. We found that radiation from the shock front was more effective at preheating the low-density foam than the high-energy x rays from the hohlraum. This shock-tube preheat experiment is important for understanding the results of the MARBLE experiments at the National Ignition Facility because initial conditions of foam-filled MARBLE capsules are sensitive to preheat.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗